im using duttys wm6.1 offical realease. it has been working great for a few months and allk of a sudden today it started turning itself on and old but it never loads past the att home screen. UNLESS if i hold the two soft keys it will load all the way to the today screen, stay there for about 1 minute and then reset it self again, it keeps resetting faster and faster after each time. ive tried numerous hard and soft resets. i dont know what to do. please help!
is my soft reset button stuck or something?
put it in boatloader by holding down the camera button and reseting and flash a new rom
Sublime5991 said:
is my soft reset button stuck or something?
Click to expand...
Click to collapse
that is a possibility .. if reflashing deosn't help (that is if u can as if soft reset key stuck it won't stay in bootloader) than take it in for service.
thesire said:
that is a possibility .. if reflashing deosn't help (that is if u can as if soft reset key stuck it won't stay in bootloader) than take it in for service.
Click to expand...
Click to collapse
the soft reset key has to be stuck because it wont stay in boot laoder and as soon as i put the battery in the phone it starts resseting again, and if i try and do a hard reset the i only have to press the 2 soft keys not even the soft reset button. will they service it even if the rom has been changed?
Related
My 8125 is stuck on "Press Send to rstore factory default, other key to exit"
It was locked this morning, when I tried to unlock it, I got this message. Tried soft reset, removed battery and pressed camera button while powering on, nothing!!
Any suggestions?
Thanks!
try a hard rest. you'll lose anything you added since you've had it, but better than a brick . . .
Tried all the hard resets I could find, it always just comes back to the "press send to restore" screen.
What unlocking tool you used?
dfairles said:
My 8125 is stuck on "Press Send to rstore factory default, other key to exit"
It was locked this morning, when I tried to unlock it, I got this message. Tried soft reset, removed battery and pressed camera button while powering on, nothing!!
Any suggestions?
Thanks!
Click to expand...
Click to collapse
What unlocking tool you tried to use? Is it a G3 or G4? (What are IPL / SPL on your phone?
that would be the message you get when you do a hard reset. have you pressed send? Did you reflash your phone sometime before that?
My phone is a G3, I unlocked it almost a year ago.
The IPL,SPL is 3.x and I have flashed this phone many times.
The strang thing is that is was locked this morning, and when I picked it up, I must have pressed some odd key combo to get it in this state and it acts like it is still locked.
Pressing send does nothing.
I have taken the battery out and pressed the cammera button during power on, used the comm and voice button while resetting, and it just pops right back to this screen. I can't seem to get it into boot loader mode or anythink.
Thank you all for you imput and help.
Anyone have and Ideas?
can you reboot and get it into the bootloader screen? if so, I'd try a reflash and see if that works
i downloaded the i900DXHH1 rom from here
http://www.modaco.com/content/pocke...icial-samsung-i900-omnia-dxhh1-update-leaked/
i followed all the steps, the update run succssful without any error, the screen says 'job done'. after that, the phone would not power on, i tried to press reset button, power button, hard reset. nothing works.
is the phone completely dead? other got the update without any problem. dont know what happened here. i need helpe badly.
any suggestion?
same to me
Hello,
I am fairly new to loading roms, but I have done it already several times successfully both on keiser and wizard,
now Yesterday I wanted to try Dutty's V1 rom and I did, now when it completed it started to boot, with the htc splash screen customized with Dutty's name etc, then it asked me to calibrate the pen, you know the normal stuff.....then it stopped booting it will get stuck into a white screen,
and it stays there, it will not active sync, it starts fine, I read: R 1.65.16.24
g 25.83.40.02W D 3.5Dutty's . then it gets into this white screen and stays till the backlite goes off, if I tap the screen the backlite goes back on, and one time I was able to hold the off button and I got even a message saying " if you disconnect them you might lose some data, continue yes or no". Tapping no or yes made no difference.
Please Help, I need to enter bootloader in some way, please help !
can you enter bootloader mode?
keep the camera button pressed and soft reset with ur stylus....or turn off ur phone and keep the camera button pressed and press the power button of ur device...
if you can enter bootloader mode...just reflash dutty's rom or maybe flash some other rom and you should be fine
Once it started to calibrate the stylus is when you Hard reset.
Please Help, I need to enter bootloader in some way, please help !
Click to expand...
Click to collapse
You definately need more lecture.
Good Day!
i made a very stupid mistake. i tried to update my Magician with Wizzard ROM.
The process went good, all the steps had been done perfectly, but my MDA crashed totally. The only think, that's happening when i'm pressing on/off button is a once instant flash of display.
I know, that's is too naive from my side to think that there is any hope, but anyway: is there any way how to solve this problem?
pls help me
i was trying to upgrade my magician rom but it stopped in midway. it is showing a dark display and mention Serial on to and v1.00 at bottom.
pls help me how to give life to my pda. have tried to soft and hard reset but didnt work. thanks
do u able to start bootloader (POWER +CAMERA hold and press reset)
Cotulla said:
do u able to start bootloader (POWER +CAMERA hold and press reset)
Click to expand...
Click to collapse
I am having the same problems as bplb71....
No way to do a HardReset or Leave bootloader.... It got stuck
Now what??
Cotulla said:
do u able to start bootloader (POWER +CAMERA hold and press reset)
Click to expand...
Click to collapse
found a mgician and it starts but hangs o the align screen
the thing you need to press keeps moving arround the screen for 20 min and then i stopped
i am also having the same problem.,, cant enter the bootloader or hard reset ,,,,,magician is stuck now,,, what should i do now???? i am worried.
happend to me to
i have same problem but when i let battery run out and then plug into wall it boots normally but then it asks to restarts after setup and back to square one help plz
recently i installed Salvy.C.83_Megan_v1.4_WWE_Polaris_EzInput_2.1 rom
after than my phone worked fine for two hours but after that suddenly switched off and now its not working
it just struck on starting screen
where smart mobility is written
please help me
thanks in advance .............
Go in bootloader mode (press camera & soft reset), and flash your rom again.
After you installed it, hardreset your device!
really thanks dude
a lot of gratitude to you
what's the (press camera & soft reset) button i know the reset button i dont no about the camera can u plz tell me fast coz my phone as stop working and its stuck on htc white screen...((
Just press the Camera Button on the Bottom Right the same time you press the Reset Button.
Hi, I've had this issue, reflashed the ROM, after one or two days of use, it happens again, reflashing only revives the phone for 1 or 2 days until it gets stuck into the bootloader screen again
Does anyone have any suggestion ?