i downloaded the i900DXHH1 rom from here
http://www.modaco.com/content/pocke...icial-samsung-i900-omnia-dxhh1-update-leaked/
i followed all the steps, the update run succssful without any error, the screen says 'job done'. after that, the phone would not power on, i tried to press reset button, power button, hard reset. nothing works.
is the phone completely dead? other got the update without any problem. dont know what happened here. i need helpe badly.
any suggestion?
same to me
Related
My 8125 is stuck on "Press Send to rstore factory default, other key to exit"
It was locked this morning, when I tried to unlock it, I got this message. Tried soft reset, removed battery and pressed camera button while powering on, nothing!!
Any suggestions?
Thanks!
try a hard rest. you'll lose anything you added since you've had it, but better than a brick . . .
Tried all the hard resets I could find, it always just comes back to the "press send to restore" screen.
What unlocking tool you used?
dfairles said:
My 8125 is stuck on "Press Send to rstore factory default, other key to exit"
It was locked this morning, when I tried to unlock it, I got this message. Tried soft reset, removed battery and pressed camera button while powering on, nothing!!
Any suggestions?
Thanks!
Click to expand...
Click to collapse
What unlocking tool you tried to use? Is it a G3 or G4? (What are IPL / SPL on your phone?
that would be the message you get when you do a hard reset. have you pressed send? Did you reflash your phone sometime before that?
My phone is a G3, I unlocked it almost a year ago.
The IPL,SPL is 3.x and I have flashed this phone many times.
The strang thing is that is was locked this morning, and when I picked it up, I must have pressed some odd key combo to get it in this state and it acts like it is still locked.
Pressing send does nothing.
I have taken the battery out and pressed the cammera button during power on, used the comm and voice button while resetting, and it just pops right back to this screen. I can't seem to get it into boot loader mode or anythink.
Thank you all for you imput and help.
Anyone have and Ideas?
can you reboot and get it into the bootloader screen? if so, I'd try a reflash and see if that works
Hello,
I installed a new rom on my diamond, and everything went fine. Then after the process completed, the phone restarted, but it hangs on the very first screen "Touch Diamond".
There are even no red letters with the version number and stuff.
I can't do anything, because I can't connect it to my pc to put another rom on it. It just doesn't do anything.
pls help me, because I really don't know how to fix this
thx
i got it fixed, thanks to this post http://forum.ppcgeeks.com/showthread.php?t=51508
By pressing the power button, volDown and left arrow an at the same time pushing the reset button, you can connect the pc with the phone, then you can install another rom.
Thank god
grtz
Hi guy
Hi I have replaced display on Zenfone 2 ZE500CL. But when I turn on the device, says me "update firmware touchscreen". It remains at 0% and then says "press and hold power button until the screen has black for a moment for to start a new touchscreen firmware update."If i hold power button it power off and i can only turn on again, but it says the same thing. I have already do hard reset and O.S, but nothing. Anyone can help me?
Thanks :crying::crying::crying:
Miticohtc said:
Hi guy
Hi I have replaced display on Zenfone 2 ZE500CL. But when I turn on the device, says me "update firmware touchscreen". It remains at 0% and then says "press and hold power button until the screen has black for a moment for to start a new touchscreen firmware update."If i hold power button it power off and i can only turn on again, but it says the same thing. I have already do hard reset and O.S, but nothing. Anyone can help me?
Thanks :crying::crying::crying:
Click to expand...
Click to collapse
Anyone can help me?
Guys guys Science may have found a solution right now ... will luckily I do not know, however, acts, then taken by anxiety, I did a downgrade of the OS taking it to the first version available from asus website:
https://www.asus.com/it/Phone/ZenFon...Desk_Download/ and download the oldest! that is, the first at the bottom, downloaded the zip file, and insert it in SD, reboot the phone in boot pressed power button and volume +, with selected RECOVERYMOD down key and select it with the power button, go into recovery and select update from SD car, flashed the firmware previously downloaded and placed in SD at the end you do the second wipe data factory and wipe cache, and reboot, there will dawn upgrade the touch, but the startup screen with the set of languages, now do not do anything and restart again, now it appears the annoying firmware upgrade again always with 0% but the screen "press and hold the power button ... etc .." do it and you will see that it will restart the cell, proceed quietly with the set of the options and creating acount, now every time you turn it on or ravviate, will win for a second the annoying pop-ups but the cell will reboot again and will turn on normally, it is not the best solutions but at least you can use your device, I hope I was helpful and let me know
PS SORRY FOR MY BAD ENGLISH
FIX FILE
HI guy this is a solution, download it,insert in SD card,and flash via recovery
https://www.dropbox.com/s/yyfuxude558rbpj/UL-ASUS_Z00D-WW-12.16.4.3-user.zip?dl=0
I'm going to try to keep this as simple as possible as I don't really know what I did wrong or how I ended up where I am now.
I have a Samsung Galaxy 8+ and I decided to root it. I decided to follow this guy's instructions on how to do it: youtube.com/watch?v=eh-I4uxAmUY.
I follow his steps and am bought to the "Unmodified System Partition" menu after having gone through the process of factory resetting, wiping my data and using Odin to flash twrp-3.1.0-r1_dreamlteks.
The problem is that now the touch screen is unresponsive. It does literally nothing.
I am stuck at the screen that says "Keep System Read only?" where I have to "Swipe to Unlock Modifications", but find myself unable to do so because my touch screen doesn't let me swipe!
So now I'm panicking:
Firstly, I can't get the phone to shut down. Holding the power button does nothing, even if I hold it for a full minute.
Secondly, I can't boot the phone into anything except this unresponsive TWRP thing.
Thirdly, my computer no longer recognizes my phone when I try to connect it via USB (might be unrelated?).
How ****ed am I?
Is my phone just bricked now?
Can I save this rooting attempt in any way, or at least revert to the stock?
Will bringing the phone to a retailer help me in any way, or have I already broken the warranty?
Please guys I am desperate for some assistance here.
ViRALiC said:
I'm going to try to keep this as simple as possible as I don't really know what I did wrong or how I ended up where I am now.
I have a Samsung Galaxy 8+ and I decided to root it. I decided to follow this guy's instructions on how to do it: youtube.com/watch?v=eh-I4uxAmUY.
I follow his steps and am bought to the "Unmodified System Partition" menu after having gone through the process of factory resetting, wiping my data and using Odin to flash twrp-3.1.0-r1_dreamlteks.
The problem is that now the touch screen is unresponsive. It does literally nothing.
I am stuck at the screen that says "Keep System Read only?" where I have to "Swipe to Unlock Modifications", but find myself unable to do so because my touch screen doesn't let me swipe!
So now I'm panicking:
Firstly, I can't get the phone to shut down. Holding the power button does nothing, even if I hold it for a full minute.
Secondly, I can't boot the phone into anything except this unresponsive TWRP thing.
Thirdly, my computer no longer recognizes my phone when I try to connect it via USB (might be unrelated?).
How ****ed am I?
Is my phone just bricked now?
Can I save this rooting attempt in any way, or at least revert to the stock?
Will bringing the phone to a retailer help me in any way, or have I already broken the warranty?
Please guys I am desperate for some assistance here.
Click to expand...
Click to collapse
You have voided your warranty so you can't take it down to the shop and get it replaced.
It isn't fully bricked because you can still boot into an "os" that isn't fully functional. It ain't recognised because you have to swipe past this and hop into the ADB sideload interface. Btw, try holding your home button, power button and volume up (or down) and report results.
If I was you, I would wait till the battery drains and shuts off and then let it be off for the rest of the night or something and then try again.
RAZERZDAHACKER said:
You have voided your warranty so you can't take it down to the shop and get it replaced.
It isn't fully bricked because you can still boot into an "os" that isn't fully functional. It ain't recognised because you have to swipe past this and hop into the ADB sideload interface. Btw, try holding your home button, power button and volume up (or down) and report results.
If I was you, I would wait till the battery drains and shuts off and then let it be off for the rest of the night or something and then try again.
Click to expand...
Click to collapse
Alright, I'll give it until it passes out from battery loss and then get back on when things change. Thanks for the reply!
Hello everyone,
I apologize that my first post is directly asking for help but I've spent days reading and trying to figure out my issue to no avail.
I have a SM-G955FD and a few days ago it just turned off (battery at 40% and charging) and wouldn't turn back again (stock firmware, never rooted).
Recovery Mode (Pwr + Volume Up + Bixby) doesn't do a thing (Black Screen)
Download Mode (Pwr + Volume Down + Bixby) opens the Download Menu, if I proceed (Volume Up) , the device shows up in Odin.
I tracked the same firmware I had to flash it and found it. I load up the BL,AP,CP & CSC and proceed with flashing the device through ODIN.
Everything completes and I get a "PASS" from ODIN. However, when my phone reboots I get a blank screen with no vibration or logo or anything, it seems as if rebooting is actually turning the phone off.
Do you have any suggestions on what I can do? The device is still under warranty but I'd rather try everything within my ability to try and fix it.
Thank you so much folks.
Edit #1: Took it to a Samsung Repair Center and they told me I've voided my warranty because I installed a custom firmware. I clearly show them the "Download Menu" and how it's clearly marked "Official" & the Warranty Void bit/hex is 0 (I only flashed the same exact firmware from Sammobile using Odin, nothing even related to rooting which they claimed I did). They tell me this doesn't matter and that it's now out of warranty and if a software flash doesn't work then they would have to charge me 380$ (American Dollars).
I have a gut feeling that it's a software related thing at this point but my realistic assumption is that since the power button isn't causing the phone to vibrate it's probably a hardware issue.
What do you guys think?
I really apologize for the long posts, but I'm really pissed since the phone is barely 6 months old and I bought it unlocked.
galaxyflashing said:
I really apologize for the long posts, but I'm really pissed since the phone is barely 6 months old and I bought it unlocked.
Click to expand...
Click to collapse
did you try soft reset ? this is how :
To soft reset a frozen Galaxy S8 or S8 Plus you need to hold the power button and the volume-down button for roughly 7 seconds. Let go of the buttons once you feel the device vibrate and see the Samsung Galaxy S8 logo on the screen. Your phone will then reboot, and hopefully, start working properly once again
One thing to note: On the forced reboot/soft reset, you will be given four (4) options. Use the volume keys to navigate, and the “Bixby” key to select. Option 1 will do a normal boot, as if you’re turning the device on.
i hope your phone work again... try another Samsung repair center and don't explain anything just told them that your phone worked fine and one morning this problem appears... and nothing else don't mention Odin flash or....
i think this its storage problem or a hardware fail...
I have same issue my phone only can enter download mode, i try flash with 3 different firmware, it said pass but my phone wont reboot. It just like turn off
Then i unthick auto reboot, but it still same. My phone wont reboot
Even with pit file i just do nothing, it still cant reboot
If anyone have solution please share to me, i'm stuck i dont know what must i do
Arfianritkah said:
I have same issue my phone only can enter download mode, i try flash with 3 different firmware, it said pass but my phone wont reboot. It just like turn off
Then i unthick auto reboot, but it still same. My phone wont reboot
Even with pit file i just do nothing, it still cant reboot
If anyone have solution please share to me, i'm stuck i dont know what must i do
Click to expand...
Click to collapse
Hi there! No solution other than changing the motherboard. Went to another repair center and they did that in less than 2 hours and around a day to complete the water test.
Good luck