Database Info

help!

im using duttys wm6.1 offical realease. it has been working great for a few months and allk of a sudden today it started turning itself on and old but it never loads past the att home screen. UNLESS if i hold the two soft keys it will load all the way to the today screen, stay there for about 1 minute and then reset it self again, it keeps resetting faster and faster after each time. ive tried numerous hard and soft resets. i dont know what to do. please help!
is my soft reset button stuck or something?

put it in boatloader by holding down the camera button and reseting and flash a new rom

Sublime5991 said:
is my soft reset button stuck or something?
Click to expand...
Click to collapse
that is a possibility .. if reflashing deosn't help (that is if u can as if soft reset key stuck it won't stay in bootloader) than take it in for service.

thesire said:
that is a possibility .. if reflashing deosn't help (that is if u can as if soft reset key stuck it won't stay in bootloader) than take it in for service.
Click to expand...
Click to collapse
the soft reset key has to be stuck because it wont stay in boot laoder and as soon as i put the battery in the phone it starts resseting again, and if i try and do a hard reset the i only have to press the 2 soft keys not even the soft reset button. will they service it even if the rom has been changed?

Htc Kaiser Dead After Flash Finshed

AFTER UNLOCK NO VOICE OR SPEAKER WORKING I JUST FLASHED WITH
(RUU_Kaiser_HTC_WWE_1.25.405.0_22.39.82.00.b_1.27.04.15_Test) NOW PHONE DOESNT
POWER UP OR BOOT MODE BLANK SCREEN
I TRY TO CONNECT TO THE COMPUTER ASKING DRIVER (DATE INTERFACE)
I NEED YOUR HELP TO GET BACK LIVE
PLEASE
THANKS

How did you unlock it? Did you CID unlock? HardSPL version? Can you get to the bootloader by holding down the camera button and power button and soft reset at the same time?
From the sound of things you loaded a CID locked rom onto your locked phone. This is only a guess though based on the fact that the ROM you loaded included a compatible radio.

Just a tip, next time don't use all caps. It's considered shouting and inappropriate. We understand your urge to get it fixed so we'll help even without the caps
Answering Alibaba0101's questions will help a lot. Also, have you tried taking the battery out and putting it back in?

The phone was on orange.
Step 1: install JumpSPL1.93-KAIS.exe
Step 2: Run KaiserUnlocker.exe (PolarisUnlocker)
Step 3: Flash Hard-SPL (but the screen goes white then i boot the phone manually by pressing camera button) after done.
Step 4: Run unlock Radio (take couple of mint and done and phone reboot)
Step 5: Run Unlocker ( after run unlocker i get 2 option unlock and super cid 000000 and I click checked both option and press okay its take less then 1 mint done.
Step 6: i take it out battery from the phone put different sim card and power on the phone phone was unlocked when I dial help line i didn’t get any sound. No speaker no ear sounds.
then i flashed (RUU_Kaiser_HTC_WWE_1.25.405.0_22.39.82.00.b_1.27. 04.15_Test) and after done flash phone dead screen blank I try to boot the phone by pressing camera button but phone not responding after connect the usb to phone get msg (DATA INTERFACE) driver.
Phone still dead i try to put another battery but still same I did try soft reset hard reset but still dead
Please help
THANKS

lxa786 said:
The phone was on orange.
Step 1: install JumpSPL1.93-KAIS.exe
Step 2: Run KaiserUnlocker.exe (PolarisUnlocker)
Step 3: Flash Hard-SPL (but the screen goes white then i boot the phone manually by pressing camera button) after done.
Step 4: Run unlock Radio (take couple of mint and done and phone reboot)
Step 5: Run Unlocker ( after run unlocker i get 2 option unlock and super cid 000000 and I click checked both option and press okay its take less then 1 mint done.
Step 6: i take it out battery from the phone put different sim card and power on the phone phone was unlocked when I dial help line i didn’t get any sound. No speaker no ear sounds.
then i flashed (RUU_Kaiser_HTC_WWE_1.25.405.0_22.39.82.00.b_1.27. 04.15_Test) and after done flash phone dead screen blank I try to boot the phone by pressing camera button but phone not responding after connect the usb to phone get msg (DATA INTERFACE) driver.
Phone still dead i try to put another battery but still same I did try soft reset hard reset but still dead
Please help
THANKS
Click to expand...
Click to collapse
I don't see the step where you flashed your original radio back after doing the SIM unlock. The radio that you is a special "patched" radio, and the phone will not successfully boot into Windows with it flashed.
Go into the bootloader (hold Camera during power on), and flash a compatible radio. If you haven't flashed a cooked ROM yet, then just hit up the Kaiser Wiki and grab the original ship radio for your phone.

Bootloader is entered by holding the power button and camera button down while soft resetting the phone. (sticking the styles in the hole) Keep holding the 2 buttons down until your in bootloader. Even with the wrong radio the phone should still go into bootloader properly

austinsnyc said:
Bootloader is entered by holding the power button and camera button down while soft resetting the phone. (sticking the styles in the hole) Keep holding the 2 buttons down until your in bootloader. Even with the wrong radio the phone should still go into bootloader properly
Click to expand...
Click to collapse
huh. I don't have to hold down the power button to enter the bootloader. I just hold down the camera button and put the stylus into the reset hole.

Boot Loader
Same here I just hold down camera button and soft reset works every time.

hi I need your more help how can I get phone on boot mode phone dead not responding I tried more then 10 time by pressing camera and power button phone still blank screen.
No display show so how can I flash the phone
Any idea to flash the phone dead mode?
thanks

If you cant get it into boot loader mode, ur gonna have a lot of trouble trying to fix it. Like everyone has said so far... Press and hold both the Power button and Camera button together and then use your stylus to soft reset it.

This has gotten people in the past, so sorry if it sounds dumb.
The Camera button has two settings Full Press and Half Press. Press until it stops then press again. You need to be pushing the Camera Button down all the way to get into Bootloader.
Also I never need to press the power Power Button As well.

I may be wrong but, when the phone is on, you can press the Camera and Soft Reset buttons. When the phone is off, you press the Power, Camera, and Soft Reset buttons to go directly into boot loader.

i tried but screen still blank no light nothing when i put usb into the phone asking driver (data interface)?

Can not go in bootloader help?
Tytn 2 is dead .

Ok last night I try to install the new hyperdragon III BlackStone rom everything is fine untill it finish and it cant load in to window, the computer keep asking me for the data interface and the tilt keep restart and the screen only shows hyperdragen III. I was running hyperdragon III opal (10/11/08) I tried MMTY and reinstall the OE rom but no luck, please help!!

Tytn2 Dead or not??
Tytn 2 is dead if you see data interface driver when put in usb cabel install v3 motorola driver and you will see data qualcomm usb driver i device manager .... this mean that totaly erased memory in tytn2 and its dead,only with jtag can flash again.

Please, tell me how can y do it. I have the same problem....

Step 3: Flash Hard-SPL (but the screen goes white then i boot the phone manually by pressing camera button) after done.
Click to expand...
Click to collapse
I don't see any step about using the white screen fix so I'm guessing you didn't successfully install HardSPL and then after that you tried flashing a ROM whilst being oblivious to the fact that Hard SPL wasn't installed, so you most likely bricked your phone

AllTheWay said:
huh. I don't have to hold down the power button to enter the bootloader. I just hold down the camera button and put the stylus into the reset hole.
Click to expand...
Click to collapse
Dead HTC KAISER
Hello My friends
After along search and Googling on the net without finding any solution. at last I did took a Risk to solve and save my DEAD HTC KAISER . what i did is I ressembled the HTC KAISER , to see if my USB data input was defect, but it was Good, now .......he he.. what i fond avery smal Batterie planted on the motherboard , i took it of the the board , end waited 1 hour . then i place it back , assembeled my HTC KAISER back
Taaaaraaaaa my HTC KAISER Power Led went ON ,,, YES ..Friends . is charging .
after 1/2 hour , I swish the HTC on ,,,, heeeee Is working......flash it with the new ROM wm 6.5 ...really it went Perfect.. end My HTC KAISER... ALIVE AGAIN.
Greatins , and hoppe this will Help you..........Good Luck .
on youtube you can find videos how to dissembele your HATC KAISER.
thanks to XDA-Developers , for this great Forum.

ericc191 said:
If you cant get it into boot loader mode, ur gonna have a lot of trouble trying to fix it. Like everyone has said so far... Press and hold both the Power button and Camera button together and then use your stylus to soft reset it.
Click to expand...
Click to collapse
my kaiser boots up but after the att thing the screen gos black do you know how to fix this

Did I brick my TilT?

Hello,
I am fairly new to loading roms, but I have done it already several times successfully both on keiser and wizard,
now Yesterday I wanted to try Dutty's V1 rom and I did, now when it completed it started to boot, with the htc splash screen customized with Dutty's name etc, then it asked me to calibrate the pen, you know the normal stuff.....then it stopped booting it will get stuck into a white screen,
and it stays there, it will not active sync, it starts fine, I read: R 1.65.16.24
g 25.83.40.02W D 3.5Dutty's . then it gets into this white screen and stays till the backlite goes off, if I tap the screen the backlite goes back on, and one time I was able to hold the off button and I got even a message saying " if you disconnect them you might lose some data, continue yes or no". Tapping no or yes made no difference.
Please Help, I need to enter bootloader in some way, please help !

can you enter bootloader mode?
keep the camera button pressed and soft reset with ur stylus....or turn off ur phone and keep the camera button pressed and press the power button of ur device...
if you can enter bootloader mode...just reflash dutty's rom or maybe flash some other rom and you should be fine

Once it started to calibrate the stylus is when you Hard reset.

Please Help, I need to enter bootloader in some way, please help !
Click to expand...
Click to collapse
You definately need more lecture.

i've killed my magican in a very way(

Good Day!
i made a very stupid mistake. i tried to update my Magician with Wizzard ROM.
The process went good, all the steps had been done perfectly, but my MDA crashed totally. The only think, that's happening when i'm pressing on/off button is a once instant flash of display.
I know, that's is too naive from my side to think that there is any hope, but anyway: is there any way how to solve this problem?

pls help me
i was trying to upgrade my magician rom but it stopped in midway. it is showing a dark display and mention Serial on to and v1.00 at bottom.
pls help me how to give life to my pda. have tried to soft and hard reset but didnt work. thanks

do u able to start bootloader (POWER +CAMERA hold and press reset)

Cotulla said:
do u able to start bootloader (POWER +CAMERA hold and press reset)
Click to expand...
Click to collapse
I am having the same problems as bplb71....
No way to do a HardReset or Leave bootloader.... It got stuck
Now what??

Cotulla said:
do u able to start bootloader (POWER +CAMERA hold and press reset)
Click to expand...
Click to collapse
found a mgician and it starts but hangs o the align screen
the thing you need to press keeps moving arround the screen for 20 min and then i stopped

i am also having the same problem.,, cant enter the bootloader or hard reset ,,,,,magician is stuck now,,, what should i do now???? i am worried.

happend to me to
i have same problem but when i let battery run out and then plug into wall it boots normally but then it asks to restarts after setup and back to square one help plz

[Q] Samsung Galaxy Ace not coming up

Hi everyone,
I've got a BIG problem
I have a Galaxy Ace. A friend of mine played with it and Since then the phone is kinda dead
When I press the On/Off button, a series of vertical color bars appear on the screen (filling 2/3 of screen) [See attached]
Screen reduces the brightness in 5 secs
Then nothing happens and phone does not respond to any key combination
When I combine volume down with power buttons, the same thing happens although this time the phone camera flashes once!
Using the Volume up button gives me two flashes!
By the way, Odin recognize the phone on a COM port, but I don't know what I can do with that?
I also tried ADB REBOOT RECOVERY command in Android SDK as recommended by someone in here. It says DEVICE NOT FOUND
Does anyone have any idea how can I restore the phone to a normal state?
Appreciate your help

mehran167 said:
Hi everyone,
I've got a BIG problem
I have a Galaxy Ace. A friend of mine played with it and Since then the phone is kinda dead
When I press the On/Off button, a series of vertical color bars appear on the screen (filling 2/3 of screen) [See attached]
Screen reduces the brightness in 5 secs
Then nothing happens and phone does not respond to any key combination
When I combine volume down with power buttons, the same thing happens although this time the phone camera flashes once!
Using the Volume up button gives me two flashes!
By the way, Odin recognize the phone on a COM port, but I don't know what I can do with that?
I also tried ADB REBOOT RECOVERY command in Android SDK as recommended by someone in here. It says DEVICE NOT FOUND
Does anyone have any idea how can I restore the phone to a normal state?
Appreciate your help
Click to expand...
Click to collapse
any Ideas? I'm very worried about the phone

Try holding homescreenbutton and on key. Recovery menu should turn up. Then perform a hard reset

I just bricked my ace today and there was no way I was able to fix it, the closest I got was getting the device into a 'connecting' state in the samsung kies software but didn't got any further, no screen no nothing..
Eventually I went back to the store and they replaced it without asking too many questions, I told them it died while doing a factory reset.
Sent from my GT-S5830 using XDA App

Yes looks like the ACE still got problems, my friend's ACE also hangs alot.
My problem is that I can't see anything on the scree (see pic above) I dpn't know what state the handset is in!!!
Any one has a link to a recent firmware for ACE that works?

Weird, don't know if the resistor trick that works on the Galaxy S could also apply on this model ?
http://forum.xda-developers.com/showthread.php?t=819551

Bricked...!!!!
Guys,
i was using the ClockWork mod rom manager
i was trying to backup the current gingerbread 2.3.4 rom
n den suddenly the phone switched off
now its not turning on
i tried pressin the
VOL DOWN + HOME+ POWER KEY
inorder to go to download mode n re-flash it but
nothing appears on the screen
the phone is not responding at all
my cell was rooted
plz someone help me.......plzzz
im stuck!!!

racerronny said:
Guys,
i was using the ClockWork mod rom manager
i was trying to backup the current gingerbread 2.3.4 rom
n den suddenly the phone switched off
now its not turning on
i tried pressin the
VOL DOWN + HOME+ POWER KEY
inorder to go to download mode n re-flash it but
nothing appears on the screen
the phone is not responding at all
my cell was rooted
plz someone help me.......plzzz
im stuck!!!
Click to expand...
Click to collapse
Rom manager? If so your phone is dead. Do you honestly think selecting software meant for another device will work? Rom manager does not support the galaxy ace, yet. You've now ruined the partitions and so far noone has managed to get a successful unbrick. Make up a bull**** story and hope you get the phone fixed in warranty. Tata.
Sent from my GT-S5830 using XDA App

same prob
racerronny said:
Guys,
i was using the ClockWork mod rom manager
i was trying to backup the current gingerbread 2.3.4 rom
n den suddenly the phone switched off
now its not turning on
i tried pressin the
VOL DOWN + HOME+ POWER KEY
inorder to go to download mode n re-flash it but
nothing appears on the screen
the phone is not responding at all
my cell was rooted
plz someone help me.......plzzz
im stuck!!!
Click to expand...
Click to collapse
heyyy the same thing happened to me also...... is ther any other way 2 get my phone working???? some body helppp meee pplzzzzzz

oh,I don't want to meet the same problem,god

???
artemis102 said:
oh,I don't want to meet the same problem,god
Click to expand...
Click to collapse
cant i do any thing now with my phone???? aint there any way 2 unbrick my phone nw?????