I have a bluetooth GPS reciever and i want to connect it on COM port 9 but in the bluetooth settings it only allows me to use 6 or 7, does anyone know how to change this?
Thanks
Related
When I reconnect my BT dongle after unplugging it the selected COM port disappears from the choices in ActiveSync.
Is there any way round this?
I'm using the WIDCOMM BT software. Would it help to download something else?
Hi guys, I have a problem connecting a bt gps with Pocket map. I worked with Pocketap last year under wm2003se and it worked fine. It has a feature to search for your GPS device and it fids it within seconds. It doesn't work with wm2005. It only offers few com ports (1,2,3,6,and 9), but whenever I try to connect one of these com ports I get the same message "the com port could not be dreated. please check your settings and try again".
Does anyone have a solution please?
I'm not using Pocket map, but did you check if you haven't assigned your com ports already?
Installed the GPS by pairing it, selecting a free port. Then changed the GPS settings by selecting GPS under Settings -> System. Here you must select the same com port. Under the Access tab make sure that the Manage GPS automatically option is on. TT now automatically finds my GPS for me.......
My BT GPS mouse is connected to com4 and I can connect to 5 or 8, but none of them or seen by pocketmap. I can use these ports in TT5, but not in pocketmap. I need com 6 or 9! But if you try with bluetooth connection you (I) cannot connect with these ports, only 4,5 or 8!
I had the same problem
I had exactly the same problem.
I finally solved the problem by hard-resetting the device (power button + camera button + record button and the reset switch). Also clean then your registry (look for hard resetting wm2005 on xda-developers).
After that i was ably to assign the com-port for the bt-gps. (com 5) in my case.
and tomtom 5 works with my GPS (bt-gps).
good luck!
Martin Temmink
http://www.vrisned.com
Com ports
Thx for the response, but this is not working . I can connect to com4,5 or8 and I am working with TT5 since last year, but I can not connect to com6,7,9 which I need for my American pocketmap navigator.
I have a bluetooth GPS reciever and i want to connect it on COM port 9 but in the bluetooth settings it only allows me to use 6 or 7, does anyone know how to change this?
Im using the HTC Vox if that makes a difference?
Thanks
When you say "Bluetooth settings" are you referring to the settings in the GPS software (TomTom, Garmin etc) or are you referring to the bluetooth settings in your phone settings?
When you first pair your device with the external bluetooth device, you need to set up and outgoing port (COM5 on a Himalaya, not sure what Vox would use) and also go to the advanced bluetooth settings and chose "serial connection". The com port should then appear in your GPS software bluetooth selection choices.
Let us know if this helps.
Ports :S
Thanks Jadel for the reply, i was referring to the bluetooth settings in the phone not gps software. i have paired it and and selected serial port and then it gives me a selection of ports to use: 6 or 7, but i already have things connecting to those ports and want to select another one to use? Any ideas?
http://www.geekzone.co.nz/content.asp?contentid=2417
the guide may not be using the latests wm version but still it should
give you a clear picture as to where on the PC you handle the activesync comports
rather then on the pda which dont use comports for activesync at all
When most of us know GPS are using our COM4 in raphael, i wonder what about USB, i have some application ask me select COM communication but i didn't know which COM my phone assign for USB use ?
devices without usbHost can't use usb as a comport
you can with bluetooth though
Hi,
I want to use a wired Ethernet link with my Mi Note 10 to access to my home lan.
I bought this apparently compatible adapter model UGREEN:
"ww.ugreen.com/collections/usb-ethernet-adapter/products/usb-c-to-gigabit-rj45-ethernet-adapter"
It not works.
My phone:
Model : Mi note 10 pro
MIUI Ver. : MIUI Global 11.1.1 Stable 11.1.1.0(QFDEUXM)
Android Ver. : 10 QKQ1.190825.002
Symptoms:
After disabling Wifi and mobile data and connecting my adapter to an operational network link, no ethernet access. The adapter leds stay on steady (so no traffic). No IP address assigned by my DHCP router so not seen from the network.
Tests :
The adapter works well on Windows 10.
I tested several otherwise functional trunks and even two different DHCP routers.
The “USB OTG Checker” android application detects the adapter.
I obviously activate / deactivate various parameters, restart, activate debugging mode: nothing helps.
It looks like the Android "Wired Ethernet" service is disabled.
Questions to the community:
Does the mi note 10 pro support this feature? (I read somewhere that Xiaomi has now disabled this option. Is that true?)
Is there an Android 10 MIUI 11 security to disable or a setting to change?
Does anyone have this same problem with this model of phone? Does this work somewhere with another adapter?
Thanks in advance for your help.
Regards