Hi i dont know how this happened but mmy kaiser is stuck in bootloader. Never had hard-spl installed, was running the oficial vodafone rom. When i plug into usb, it shows usb written on the phone but on the pc it says USB DEVICE NOT RECOGNISED. I have tried to put hard-spl to see if works buit no luck, the pc does not find the usb device. I have tried to put an oficial rom but still no luck. My computer settings are all correct because my POLARIS works fine and I can flash all new roms and radios. Please someone help me with this. Thanks in advance.
sumitescp.
Pic showing the screen.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Look into the WIKI grasshopper......all your questions will be answered.
digi0123 said:
Look into the WIKI grasshopper......all your questions will be answered.
Click to expand...
Click to collapse
Hi thaks for you quick answer but I only made this thread after I have done enought research about it. Wiki does not have anything. They say to connect to mtty but cannot do that because when i connect to usb the pc says USB DEVICE NOT RECONISED.
Try booting you're phone with MTTY.
xmoo said:
Try booting you're phone with MTTY.
Click to expand...
Click to collapse
Can't when i connect phone to PC through USB it says:
and when i click on it it says:
Hard Reset DOES NOT WORK
hi again I have also tried Hard-reset
but it does not work it goes back to the same screen shown in first post.
Try flashing a rom through sd card....
Have you tried connecting to a different PC to check if it is recognized there?
aeacus said:
Have you tried connecting to a different PC to check if it is recognized there?
Click to expand...
Click to collapse
Yes on both of my laptops.
1. USING VISTA
2. USING XP
Same problem
xmoo said:
Try flashing a rom through sd card....
Click to expand...
Click to collapse
I do not have HARD-SPL installed. Can I still flash an official rom?
It says here about the hard-spl: CLICK HERE
sumitescp said:
I do not have HARD-SPL installed. Can I still flash an official rom?
It says here about the hard-spl: CLICK HERE
Click to expand...
Click to collapse
I believe you can flash a official rom without having hard SPL.
You still need to rename the .nbh file tho.
xmoo said:
I believe you can flash a official rom without having hard SPL.
You still need to rename the .nbh file tho.
Click to expand...
Click to collapse
Ok I will give it a try. Thanks
Just hook up your phone when it is in tri-color and run this.
http://rapidshare.com/files/5340369...adio_sign_22.45.88.07_1.27.11.31_Internal.exe
aabaker said:
Just hook up your phone when it is in tri-color and run this.
http://rapidshare.com/files/5340369...adio_sign_22.45.88.07_1.27.11.31_Internal.exe
Click to expand...
Click to collapse
No help with this.
No help with SD card flashing too.
SD card flashing gives me error
00028002 - NOT ALLOW
does anyone know what this numbers or NOT ALLOW means?
I have tried VODAFONE UK latest one
I have also tried HTC WWE latest one.
I have the solution........... Warrenty Exchange
sd73ta said:
I have the solution........... Warrenty Exchange
Click to expand...
Click to collapse
Bought it from ebay. LOL
instead of trying everything everyone here is telling you drop a pm to gsleon3, be nice, and ask him for help. He is some what of an expert when it comes to reviving dead/non functional kaisers. Be patient as he is extremely busy but he will respond.
and that is the best tip i can give you
I was on vacation once and out of no where, when i reset my device, it booted directy into boot loader, I didn't do sh-t. OEM rom, didnt f-ck with it. just reset to boot-loader didnt have a pc either. Well I took the battery out and reset it and still no luck, BUT BUT I did this abut twenty times, including in the process soft reseting it and..... it booted back into the OS.... I will never forget that scary day. U never know try what I did, you got nothign to loose.
jackieboy said:
I was on vacation once and out of no where, when i reset my device, it booted directy into boot loader, I didn't do sh-t. OEM rom, didnt f-ck with it. just reset to boot-loader didnt have a pc either. Well I took the battery out and reset it and still no luck, BUT BUT I did this abut twenty times, including in the process soft reseting it and..... it booted back into the OS.... I will never forget that scary day. U never know try what I did, you got nothign to loose.
Click to expand...
Click to collapse
Yes I did soft reset some times taking battery or memory cards out and it and keept resetting. But this s**t device does not want to boot up.
I can confirm that I was using radio rom v 1.27xxxxxxxxxxx
Related
I have One S (s4), accidentally erased OS and everything while in recovery, I tried to install CWM because I think I'm familiar with this recovery but after the phone went down for rebooting nothing happens! now the phone is like dead, tried to connect it to pc to use HTC One S All-in one Tool kit but to no avail. It's not recognizing my phone and pc is always saying can't install the right driver for my phone. please help!
kasuma_asuma said:
I have One S (s4), accidentally erased OS and everything while in recovery, I tried to install CWM because I think I'm familiar with this recovery but after the phone went down for rebooting nothing happens! now the phone is like dead, tried to connect it to pc to use HTC One S All-in one Tool kit but to no avail. It's not recognizing my phone and pc is always saying can't install the right driver for my phone. please help!
Click to expand...
Click to collapse
Try Power button + volume down ... Hold them for some seconds and see of you can boot into bootloader and then we can move forward.
Sent from my HTC One S using Tapatalk 4 Beta
thank you for the respond. it's not working. when I connect it to my laptop it shows "MT65xx pre-loader error' something like that, I think I bricked my One S. Oh man! I'm lost!
"QHSUSB_DLOAD driver not found" says on my laptop. I think it's the end of my phone. geez, I'm so stupid!
kasuma_asuma said:
"QHSUSB_DLOAD driver not found" says on my laptop. I think it's the end of my phone. geez, I'm so stupid!
Click to expand...
Click to collapse
I suppose that's it. You can send it to HTC if you have warranty, or JTAG.
khan.orak said:
I suppose that's it. You can send it to HTC if you have warranty, or JTAG.
Click to expand...
Click to collapse
I guess, It's just that I've never thought that my phone could end up like this. Damn, my wife's gonna kill me.
Are you sure that you flashed the correct device's recovery? Not the S3 or 64GB SE recovery?
I don't know why you'd choose CWM anyway, I think I'm the only person with a Galaxy S4 that uses TWRP (which is really, really slow on the GS4), CWM is disgusting...
Sent from my GT-I9505 using xda premium
SOLVED!
hey guys! I have an update on my phone! I'm here in the Philippines and I was able to find a guy who has a riff/jtag box to use on my One S. My phone got bricked too after wiping OS on TWRP and tried to install incorrect CWM but anyways, phone dead so I tried following Tecardo's advise, we were able to open up the phone and since we don't have any connector or jigg? I dunno, but long story short, we opened up One s, just solder the riff box's connector to the motherboard and revived the phone. he was able to revived the phone and it's looking good. been using it for 2 days now.
here's my phone now, figure I want to unlocked it again and root it and everything but I'm a bit afraid I might messed it up again. thanks to @Tecardo and now I wanna know how can I buy him a beer?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Hello guys. I've ran into a trouble from nowhere with my phone. I've installed Link2SD to copy unmoveable apps to sd card, edited some things to GravityBox, pressed reboot button, and phone has had never turned on. It's not responding on fastboot nor flashmode. Battery was about 40% and phone was charging. I can't do anything to put the phone back on. It doesn't vibrate when pressing power key, it't just behaving like it has no battery inserted. Battery is good, phone is 4 months old, unlocked bloader, rooted, 1.12 stock, thunderzap 4.1-r2. If you want more info, just ask, I will provide as much as I can. Please help me
If it doesnt respond to fastboot/fastmode it might be better to take it to a service center
Tapatalked that sh*t
Joery360 said:
If it doesnt respond to fastboot/fastmode it might be better to take it to a service center
Tapatalked that sh*t
Click to expand...
Click to collapse
What do You think could go wrong? It just happened, but why?
aerzjee said:
What do You think could go wrong? It just happened, but why?
Click to expand...
Click to collapse
Buy another battery before you take it to a service center just in case but you will need to relock the bootloader and restore ta partition or they won't touch it. sounds like a hard brick corrupted boot partition
gavster26 said:
Buy another battery before you take it to a service center just in case but you will need to relock the bootloader and restore ta partition or they won't touch it. sounds like a hard brick corrupted boot partition
Click to expand...
Click to collapse
But the problem is, that I can't relock bootloader, because the device isn't responding to anything. I can't boot in flashmode, fastboot or normally. It is just dead. The PC sees the phone as USB Input Device, or as unknown device.
I've tried different systems, different computers, nothing has helped.
Try following the instructions given here
S1N1S73R said:
Try following the instructions given here
Click to expand...
Click to collapse
But the phone is seen as Unknown Device, doesn't matter how I would plug it. If I connect my phone to charger, nothing happens. It's just behaving, like I would plug phone to charger, but not to socket in wall.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
aerzjee said:
But the problem is, that I can't relock bootloader, because the device isn't responding to anything. I can't boot in flashmode, fastboot or normally. It is just dead. The PC sees the phone as USB Input Device, or as unknown device.
I've tried different systems, different computers, nothing has helped.
Click to expand...
Click to collapse
Did you partition your internal sd for link2sd
gavster26 said:
Did you partition your internal sd for link2sd
Click to expand...
Click to collapse
Nope, only moved few apps like I normally would by using settings > apps. I did it by link2sd because it was faster for me.
aerzjee said:
Nope, only moved few apps like I normally would by using settings > apps. I did it by link2sd because it was faster for me.
Click to expand...
Click to collapse
Ok what exactly did you do in gravertybox
Try with other usb cable
Sent from my C2105 using xda premium
aerzjee said:
But the phone is seen as Unknown Device, doesn't matter how I would plug it. If I connect my phone to charger, nothing happens. It's just behaving, like I would plug phone to charger, but not to socket in wall.
Click to expand...
Click to collapse
Had the exact same problem with my Xperia L.
It somehow entered the firmware downloader mode for the qualcomm cpu after rebooting, but could not fix it and had to send it back.
The unknown device is QHSUSB_DLOAD, drivers from here work fine
http://forum.xda-developers.com/showpost.php?p=14909282&postcount=19
after repair, service said they needed to replace the main board in the phone.
gavster26 said:
Ok what exactly did you do in gravertybox
Click to expand...
Click to collapse
I've unlinked ringtone volume from notification volume. I've just laughed at my phone when I saw it hard-bricked :laugh:
virald said:
Had the exact same problem with my Xperia L.
It somehow entered the firmware downloader mode for the qualcomm cpu after rebooting, but could not fix it and had to send it back.
The unknown device is QHSUSB_DLOAD, drivers from here work fine
http://forum.xda-developers.com/showpost.php?p=14909282&postcount=19
after repair, service said they needed to replace the main board in the phone.
Click to expand...
Click to collapse
Is there any thing I can do in that firmware download mode? Forcing it to boot an image it already has? Is it similar to U-Boot from other SoC's (like in routers)? If yes, I think I could get it working.
virald said:
Had the exact same problem with my Xperia L.
It somehow entered the firmware downloader mode for the qualcomm cpu after rebooting, but could not fix it and had to send it back.
The unknown device is QHSUSB_DLOAD, drivers from here work fine
http://forum.xda-developers.com/showpost.php?p=14909282&postcount=19
after repair, service said they needed to replace the main board in the phone.
Click to expand...
Click to collapse
It seems that my issue is different, or I'm installing that driver in wrong way.
EDIT: If it could help You in anything, device identificator is: USB\VID_0FCE&PID_D18E&REV_0000
Hi guys.
I need your help very urgently.
Update my phone to android 4.4.4 and I only realized until that moment that CM11 has no radio support on many devices.
I wanted to install the stock firmware but unfortunately 15.3.A.1.14 open my bootloader after I failed to make the connect via FlashBoot.
That is, if I try to connect to fastboot I have no problems doing that and that's that mean flashing kernels, but if I connect the phone to flash mode the LED does not light,
Although flashtools if recognized as a device connected in this way, if I try to flash the firmware via everything starts normally but before end I throw an error.
Anyone have an idea that I can do, and be able to tell me why this is happening?
I appreciate your help, and I hope you can understand my English is lousy.
Stronger1101 said:
Hi guys.
I need your help very urgently.
Update my phone to android 4.4.4 and I only realized until that moment that CM11 has no radio support on many devices.
I wanted to install the stock firmware but unfortunately 15.3.A.1.14 open my bootloader after I failed to make the connect via FlashBoot.
That is, if I try to connect to fastboot I have no problems doing that and that's that mean flashing kernels, but if I connect the phone to flash mode the LED does not light,
Although flashtools if recognized as a device connected in this way, if I try to flash the firmware via everything starts normally but before end I throw an error.
Anyone have an idea that I can do, and be able to tell me why this is happening?
I appreciate your help, and I hope you can understand my English is lousy.
Click to expand...
Click to collapse
Post the screenshot of the error!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
[/url][/IMG]
david pro said:
Post the screenshot of the error!
Click to expand...
Click to collapse
Thank repsonder, this is the error.
However I must clarify what I have all drivers installed and up before upgrading the phone was detected in flash mode.
Stronger1101 said:
[/url][/IMG]
Thank repsonder, this is the error.
However I must clarify what I have all drivers installed and up before upgrading the phone was detected in flash mode.
Click to expand...
Click to collapse
Try again!!! One day, It happened with me too!!!
Try Changing the Cable or USB port!
:highfive:
david pro said:
Try again!!! One day, It happened with me too!!!
:highfive:
Click to expand...
Click to collapse
Try changing ftf. If still not resolved, try changing flashtool.
Best of luck
Hit thanks if it helps.
still connect flash mode
abhi007.john said:
Try changing ftf. If still not resolved, try changing flashtool.
Best of luck
Hit thanks if it helps.
Click to expand...
Click to collapse
Unfortunately the failure seems to be on the phone and tried it on another pc and the problem persists.
When I connect it with the volume down button, the LED lights green and then red for less than half a second, the pc makes the sound of announcing that something was connected but the phone does not turn on but the led.
The problem is that I have several tested tft and the result is the same, even though flashtool flash mode recognizes something is not right and I assume that's why flash it throws error.
I had the idea to flash in fastboot mode tft but I'm afraid to leave me a hardbrick,:crying:
Stronger1101 said:
Unfortunately the failure seems to be on the phone and tried it on another pc and the problem persists.
When I connect it with the volume down button, the LED lights green and then red for less than half a second, the pc makes the sound of announcing that something was connected but the phone does not turn on but the led.
The problem is that I have several tested tft and the result is the same, even though flashtool flash mode recognizes something is not right and I assume that's why flash it throws error.
I had the idea to flash in fastboot mode tft but I'm afraid to leave me a hardbrick,:crying:
Click to expand...
Click to collapse
I don't think that the red led keeps glowing when you connect on flash mode. It just flashes green and red once.
Also did you an updated flashtool on the other pc?
if not then try once with another cable। and flashtool.
abhi007.john said:
I don't think that the red led keeps glowing when you connect on flash mode. It just flashes green and red once.
Also did you an updated flashtool on the other pc?
if not then try once with another cable। and flashtool.
Click to expand...
Click to collapse
so it is, and try in another pc and another cable but I can not make connect, I have desperate
Stronger1101 said:
so it is, and try in another pc and another cable but I can not make connect, I have desperate
Click to expand...
Click to collapse
One more thing, the companion I recognized only when the computer is turned on but if I turn it off and connect in flash mode does not detect it.
Stronger1101 said:
One more thing, the companion I recognized only when the computer is turned on but if I turn it off and connect in flash mode does not detect it.
Click to expand...
Click to collapse
If I try to flash the firmware via fastboot damage my phone?
Stronger1101 said:
If I try to flash the firmware via fastboot damage my phone?
Click to expand...
Click to collapse
First of all, your english is terrible mate.
As far as I know you can't use fastboot to flash a firmware. I believe it's only for flashing kernels.
Also, make sure you have the required drivers installed. You can download latest drivers from here
http://forum.xda-developers.com/showthread.php?t=2635830
Along with that make sure you use an updated flashtool.
Head over to the general threadand you will find it
Hope it helps
Hit thanks if it does.
hei man, same **** hapens to me, try to use a old version of flashtool, 0.9.11.0 works for me
Hello, excuse my bad english I'm using google translate.
The problem I have is that my xperia xa is dead.
the reason of it, was that I wanted to flash the rom of my cell to remove the applications that come with the mobile company.
when I realized my error, was that I did the following, in the flash tool, in the rom selection, I made the error, not selecting the following settings:
-APPS_LOG
-DIAG
-QNOVO
-USERDATA
-CUST-RESET
as shown in the following image:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
when the flash operation ended, the cell phone did not want to turn it on, the only function it had and has so far, is that it does not vibrate, it does not turn on, it does not go into flash or fastboot mode, it's dead, it just turns on the red led.
when I try to perform the flash operation again, I simply get the following message when I connect the device.
in the windows device manager, recognizes the phone as "usb serial device (com)".
I searched the net, and I did not find the solution to this problem, I appreciate your attention, and I expect some help.
PD: I already tried the connection with pc companion, and even the function from system symbol of windows with the tool fastboot to flash the boot, with the img.
the problem is that the device does not go into any mode
1990macsfull said:
Hello, excuse my bad english I'm using google translate.
The problem I have is that my xperia xa is dead.
the reason of it, was that I wanted to flash the rom of my cell to remove the applications that come with the mobile company.
when I realized my error, was that I did the following, in the flash tool, in the rom selection, I made the error, not selecting the following settings:
-APPS_LOG
-DIAG
-QNOVO
-USERDATA
-CUST-RESET
as shown in the following image:
when the flash operation ended, the cell phone did not want to turn it on, the only function it had and has so far, is that it does not vibrate, it does not turn on, it does not go into flash or fastboot mode, it's dead, it just turns on the red led.
when I try to perform the flash operation again, I simply get the following message when I connect the device.
in the windows device manager, recognizes the phone as "usb serial device (com)".
I searched the net, and I did not find the solution to this problem, I appreciate your attention, and I expect some help.
PD: I already tried the connection with pc companion, and even the function from system symbol of windows with the tool fastboot to flash the boot, with the img.
the problem is that the device does not go into any mode
Click to expand...
Click to collapse
2 times so far, my XA died the same way after trying to flash a mod. Both times I was eventually able to resurrect it by holding down various combinations of buttons while plugging and unplugging, trying different cables, etc. The second time, it wouldn't do anything until the next day, and then it suddenly came to life when using a different cable and plugging into the wall while holding power and volume down. I would try it. I'm not too familiar with flashtool on XA. I have used it for 3 years with my Z1c and never hard bricked a phone with it. Seems like X series have a little bit different rules, but I don't see why your phone would hard-brick just because you didn't wipe a few partitions... Also good idea to check in with FT thread.
If the computer does recognize it, maybe you need to reinstall your usb drivers. If its not, then u have a big problem with it, before making anything you need to see if there is a way to connect it by Fastboot, and install his custom TWRP. if u are able to do that, there is a sollution for you.
Remember always to install your usb flash drivers, and the fastboot drivers too.
Same problem my XA F3113 is dead. The LOG says everything was ok but after disconnect it from PC the phone dies.
Look like exist a way to get it back to life but we need the SCATTERED FILE.
Can somebody share us the SCATTERED FILE of this Model?
Really appreciate this guy....
Awesome person. He had recover my dead XA ultra through online. Just with 500 INR.
wrundawan said:
Whats app me +918147499618 I can help you to fix your dead phone.
Click to expand...
Click to collapse
i have a same problem
please help. my phone f3113 is dead after downgrade
wrundawan said:
Whats app me +918147499618 I can help you to fix your dead phone.
Click to expand...
Click to collapse
Be careful this guy is a cheater he cheated $30 from me
Who the hell has cheated you?
Check your paypal with your open eyes since you had raised claim on your money inside paypal your money was refunded by them. And I am helpless as I didn't got your money.
mballe francois said:
Be careful this guy is a cheater he cheated $30 from me
Click to expand...
Click to collapse
mtk scatter
Hi! Today I was trying to update my 1+6 to Android 10. I always make a wipe in my phone and later I flash the zip of the OTA. Well, in this case, my phone doenst want to turn up on recovery mode and I can't make anything. I can enter to fastboot mode (to use msmdownloadtool) and my phone there is in cmd fastboot devices, but not in msmdownloadtool. I have installed all the drivers,I have used ALL IN ONE TOOL, I have changed the usb ports but my phone is not in device manager on windows. It is frustating and it never happened to me.
Sorry for my bad english, and thank you for reading!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Use msndownloadtool, but you're doing it wrong, you need to get in download mode in order for msn to work, to do that you need to unplug any cable from your phone and shut down your phone, connect a cable to your pc, hold vol up in your phone, plug in cable from PC, nothing is going to pop up in your phone but you can hear a sound in your pc, now you can use msn tool to reinstall oos, let me know if i helped you out
Use this method??
Hi if you are able to go to fastboot then just download fastboot Rom for Android 10 and flash it through fastboot.
If you get problem in flashall.bat then just edit that in notepad and delete -w and save that file then try flashing again. Once done it will boot into stock recovery, erase all data and then reboot. everything will work fine
J0nhy said:
Use msndownloadtool, but you're doing it wrong, you need to get in download mode in order for msn to work, to do that you need to unplug any cable from your phone and shut down your phone, connect a cable to your pc, hold vol up in your phone, plug in cable from PC, nothing is going to pop up in your phone but you can hear a sound in your pc, now you can use msn tool to reinstall oos, let me know if i helped you out
Click to expand...
Click to collapse
No.. I hear the sound and my phone is in download mode, but doesn't appear on devices manager of windows. I don't know what happened. The msmdownload is on blank, no devices are listed in
rahulbhola123 said:
Hi if you are able to go to fastboot then just download fastboot Rom for Android 10 and flash it through fastboot.
If you get problem in flashall.bat then just edit that in notepad and delete -w and save that file then try flashing again. Once done it will boot into stock recovery, erase all data and then reboot. everything will work fine
Click to expand...
Click to collapse
Hi! I get problem with flashall.bat, but when I opene it on Notepad and deleted the "-w" It says me "cannot load logo.img" or something like that jajajaj.
Marcos2310 said:
Hi! I get problem with flashall.bat, but when I opene it on Notepad and deleted the "-w" It says me "cannot load logo.img" or something like that jajajaj.
Click to expand...
Click to collapse
You're not using msn you're using the fastboot one
Try this one instead this is the msntool, it will restore your device to life
https://forum.xda-developers.com/oneplus-6/how-to/op6-collection-unbrick-tools-t3914109
J0nhy said:
You're not using msn you're using the fastboot one
Try this one instead this is the msntool, it will restore your device to life
https://forum.xda-developers.com/oneplus-6/how-to/op6-collection-unbrick-tools-t3914109
Click to expand...
Click to collapse
Nop, the problem is that my phone is not being recognized anymore by the tool..
Marcos2310 said:
Hi! I get problem with flashall.bat, but when I opene it on Notepad and deleted the "-w" It says me "cannot load logo.img" or something like that jajajaj.
Click to expand...
Click to collapse
Did you tried without deleting the -w
Marcos2310 said:
Hi! Today I was trying to update my 1+6 to Android 10. I always make a wipe in my phone and later I flash the zip of the OTA. Well, in this case, my phone doenst want to turn up on recovery mode and I can't make anything. I can enter to fastboot mode (to use msmdownloadtool) and my phone there is in cmd fastboot devices, but not in msmdownloadtool. I have installed all the drivers,I have used ALL IN ONE TOOL, I have changed the usb ports but my phone is not in device manager on windows. It is frustating and it never happened to me.
Sorry for my bad english, and thank you for reading!
Click to expand...
Click to collapse
https://forum.xda-developers.com/oneplus-6/how-to/rom-stock-fastboot-roms-oneplus-6-t3796665
Marcos2310 said:
Nop, the problem is that my phone is not being recognized anymore by the tool..
Click to expand...
Click to collapse
Try with different cables, your cable might be the problem
Any update?