Database Info

[Q] my Xperia E Dual hardbrick??

My xperia E Dual is dead, nothing to do with my phone
before it dead, i want to factory reset from my phone, after that its rebooting.
rebooted
then, there is no sign for the phone's live
then, i try to fastboot or flashboot mode, didn't work :crying:
i try to search any more method to fix it from google, that's all didn't work :crying:
each i plug phone with PC or with wall charger, or i try to start my phone with power button, just there is red led from proximity sensor, no from leds generally.
any one help me huhu :angel:
my phone have been dead for 3 days because of it :crying:
my english is so bad i know it and i'm sorry for it

I'm using Xperia e
I'm guessing you don't have recovery.
Fastboot should work normally without any problem. Do you have the drivers installed?

axonelover said:
I'm guessing you don't have recovery.
Fastboot should work normally without any problem. Do you have the drivers installed?
Click to expand...
Click to collapse
thanks bro
i have recovery before
for the drivers, what driver? hehe
i just installed CM10, then bootloader unlocked.

Hai there buddy, so just a reset in cm10 caused this???
Well what happens when you connect it??
Does the battery charge up?
Have you tried a new battery!?
Sent from my C1605 using xda app-developers app

baffled
can't boot to recovery , no fastboot or flashmode?
would like to know how this works out.
was asking about fastboot drivers earlier

Sometimes fastboot makes things really simple.you can try flashing some kernels and systems with fastboot
What about the battery level does the proximity sensor work when charger is connected??
Hit the thanks button instead of telling it....
thank you
sent from my Xperia E dual C1604..

mathewsj114 said:
Sometimes fastboot makes things really simple.you can try flashing some kernels and systems with fastboot
What about the battery level does the proximity sensor work when charger is connected??
Hit the thanks button instead of telling it....
thank you
sent from my Xperia E dual C1604..
Click to expand...
Click to collapse
nothing display any thing, for the battery level too
but when phone is chargered the proximity sensor work, and when phone connect to PC or laptop, it is work too

axonelover said:
can't boot to recovery , no fastboot or flashmode?
would like to know how this works out.
was asking about fastboot drivers earlier
Click to expand...
Click to collapse
fastboot drivers has installed before my phone works out
yes, i can't doing anything with my xperia, no fastboot, no flashboot, etc
this works out, i want factory reset for my phone, but when it rebooting, it is not on again. then i catch battery, and i put back, and i try to ON my phone, thats nihil :crying:

dude,
can you check your battery?
i mean sometimes this could be due to a dead battey......
okay do this leave the phone overnight for charging,next day DO NOT POWER IT ON,
PULL OUT THE BATTERY wait for a few hours and try connecting in flashmode.
DO NOT PRESS THE POWER BUTTON let's see if it works..

My phone is Sony Xperia E1​ dual. I have to try to master reset but it doesnot happening anything and it only shows wave and sony logo and nothing else. Please help me to do hard reset.

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
my friend e singke c1505 just blinking red light when charge...
no fastboot, no flashboot, no vibrate
first i check componen on circle (capasitor) is "short"... (check this first)
then pull off the capasitor with knife...
then .....viola...xperia e vibrate...and power on again

prinesh1994 said:
My phone is Sony Xperia E1​ dual. I have to try to master reset but it doesnot happening anything and it only shows wave and sony logo and nothing else. Please help me to do hard reset.
Click to expand...
Click to collapse
reflash the stock firmware and do again full wipe. If this method doesnt work, try to repair using Xperia Companion to your pc and select Software Repair. Follow the Instructions provided in the Program. :good: :good: :good: Don't forget to hit thanks if this suits you,.,.,., :good:

Codetrr said:
my friend e singke c1505 just blinking red light when charge...
no fastboot, no flashboot, no vibrate
first i check componen on circle (capasitor) is "short"... (check this first)
then pull off the capasitor with knife...
then .....viola...xperia e vibrate...and power on again
Click to expand...
Click to collapse
I haven't try that. I want to do that in my xperia e.,

Jay4ü said:
I haven't try that. I want to do that in my xperia e.,
Click to expand...
Click to collapse
becarefull to doing that...
check with multitester fisrt
make sure you are on right capasitor...

done on that! I checked with my brother's digital multimeter it seems nothing. Well, I already removed the capacitor, my xperia e doesn't turning on again. no vibrate. no fastboot,flashmode happened. Maybe this is the end of using to my dearest Xperia E.

[Q] Downgrade to 4.2.2 Xperia L stock bootloader unlocked

Hi guys.
I need your help very urgently.
Update my phone to android 4.4.4 and I only realized until that moment that CM11 has no radio support on many devices.
I wanted to install the stock firmware but unfortunately 15.3.A.1.14 open my bootloader after I failed to make the connect via FlashBoot.
That is, if I try to connect to fastboot I have no problems doing that and that's that mean flashing kernels, but if I connect the phone to flash mode the LED does not light,
Although flashtools if recognized as a device connected in this way, if I try to flash the firmware via everything starts normally but before end I throw an error.
Anyone have an idea that I can do, and be able to tell me why this is happening?
I appreciate your help, and I hope you can understand my English is lousy.

Stronger1101 said:
Hi guys.
I need your help very urgently.
Update my phone to android 4.4.4 and I only realized until that moment that CM11 has no radio support on many devices.
I wanted to install the stock firmware but unfortunately 15.3.A.1.14 open my bootloader after I failed to make the connect via FlashBoot.
That is, if I try to connect to fastboot I have no problems doing that and that's that mean flashing kernels, but if I connect the phone to flash mode the LED does not light,
Although flashtools if recognized as a device connected in this way, if I try to flash the firmware via everything starts normally but before end I throw an error.
Anyone have an idea that I can do, and be able to tell me why this is happening?
I appreciate your help, and I hope you can understand my English is lousy.
Click to expand...
Click to collapse
Post the screenshot of the error!

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
[/url][/IMG]
david pro said:
Post the screenshot of the error!
Click to expand...
Click to collapse
Thank repsonder, this is the error.
However I must clarify what I have all drivers installed and up before upgrading the phone was detected in flash mode.

Stronger1101 said:
[/url][/IMG]
Thank repsonder, this is the error.
However I must clarify what I have all drivers installed and up before upgrading the phone was detected in flash mode.
Click to expand...
Click to collapse
Try again!!! One day, It happened with me too!!!
Try Changing the Cable or USB port!
:highfive:

david pro said:
Try again!!! One day, It happened with me too!!!
:highfive:
Click to expand...
Click to collapse
Try changing ftf. If still not resolved, try changing flashtool.
Best of luck
Hit thanks if it helps.

still connect flash mode
abhi007.john said:
Try changing ftf. If still not resolved, try changing flashtool.
Best of luck
Hit thanks if it helps.
Click to expand...
Click to collapse
Unfortunately the failure seems to be on the phone and tried it on another pc and the problem persists.
When I connect it with the volume down button, the LED lights green and then red for less than half a second, the pc makes the sound of announcing that something was connected but the phone does not turn on but the led.
The problem is that I have several tested tft and the result is the same, even though flashtool flash mode recognizes something is not right and I assume that's why flash it throws error.
I had the idea to flash in fastboot mode tft but I'm afraid to leave me a hardbrick,:crying:

Stronger1101 said:
Unfortunately the failure seems to be on the phone and tried it on another pc and the problem persists.
When I connect it with the volume down button, the LED lights green and then red for less than half a second, the pc makes the sound of announcing that something was connected but the phone does not turn on but the led.
The problem is that I have several tested tft and the result is the same, even though flashtool flash mode recognizes something is not right and I assume that's why flash it throws error.
I had the idea to flash in fastboot mode tft but I'm afraid to leave me a hardbrick,:crying:
Click to expand...
Click to collapse
I don't think that the red led keeps glowing when you connect on flash mode. It just flashes green and red once.
Also did you an updated flashtool on the other pc?
if not then try once with another cable। and flashtool.

abhi007.john said:
I don't think that the red led keeps glowing when you connect on flash mode. It just flashes green and red once.
Also did you an updated flashtool on the other pc?
if not then try once with another cable। and flashtool.
Click to expand...
Click to collapse
so it is, and try in another pc and another cable but I can not make connect, I have desperate

Stronger1101 said:
so it is, and try in another pc and another cable but I can not make connect, I have desperate
Click to expand...
Click to collapse
One more thing, the companion I recognized only when the computer is turned on but if I turn it off and connect in flash mode does not detect it.

Stronger1101 said:
One more thing, the companion I recognized only when the computer is turned on but if I turn it off and connect in flash mode does not detect it.
Click to expand...
Click to collapse
If I try to flash the firmware via fastboot damage my phone?

Stronger1101 said:
If I try to flash the firmware via fastboot damage my phone?
Click to expand...
Click to collapse
First of all, your english is terrible mate.
As far as I know you can't use fastboot to flash a firmware. I believe it's only for flashing kernels.
Also, make sure you have the required drivers installed. You can download latest drivers from here
http://forum.xda-developers.com/showthread.php?t=2635830
Along with that make sure you use an updated flashtool.
Head over to the general threadand you will find it
Hope it helps
Hit thanks if it does.

hei man, same **** hapens to me, try to use a old version of flashtool, 0.9.11.0 works for me

Hard bricked my OnePlus One by just rebooting it, help! [5$ REWARD]

I will be straightforward:
I bought an used OPO, I booted it up, configured the phone, took a photo and then decided to reboot it (turn off and then turn on), then my device simply hard bricked.
1. I already tried turning it on, the device does nothing (no vibration).
2. I already tried using Power + Vol Up and Power + Vol Down, nothing happens (no vibration).
3. Windows recognizes the device as "QHSUSB_BULK", I already tried installing the drivers and using ColorOS flashing tool from here http://forum.xda-developers.com/oneplus-one/general/guide-unbrick-oneplus-one-t3013732 , the device IS RECOGNIZED by the tool, but when I start flashing, it starts a loop when trying to flash the "8974_msimage.mbn" file (the progress bar goes until the end and then the process repeat in the same file).
Yes, the device has the bootloader unlocked, because the previous owner flashed a custom ROM, custom kernel and SuperSU.
No, the device isn't recognized by adb.
No, the device isn't recognized by fastboot.
I already tried searching on Google for this issue, everyone who had this issue never replied saying that they fixed the issue...
I never had any kind of soft/hard brick on my Moto G 2014 (and I flashed custom ROMs constantly on it)... so... can someone help me? Thanks!
I'm also willing to give 5$ on PayPal to someone who can fix this issue.

Also, if I try to use the ColorOS flashing tool, the device disconnects in the middle of the process, causing the infinite flash loop.

First, if you have a computer which installed Windows XP, just flash the ROM with COLOROS tool.
Second,if you a using Windows7 or later,,give me a photo of what the COLOROS tool showed.
Thanks for forgiving my poor English

sino1641 said:
First, if you have a computer which installed Windows XP, just flash the ROM with COLOROS tool.
Second,if you a using Windows7 or later,,give me a photo of what the COLOROS tool showed.
Thanks for forgiving my poor English
Click to expand...
Click to collapse
Nah, your english is fine, I could understand what you are saying.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
After I clicked "Start"
Then the "device plugged in" sound plays and the process repeats...
It keeps doing this:
(If you can't view the images, click here:
http://lori.mrpowergamerbr.com/sharex/Msm8974DownloadTool_2016-07-22_10-39-42.png
http://lori.mrpowergamerbr.com/sharex/Msm8974DownloadTool_2016-07-22_10-40-18.png
http://lori.mrpowergamerbr.com/sharex/2016-07-22_10-41-05.gif
)

Morning,my friend.
I tried to brick my OPO for testing.
Here's the solution.
First,open Device Manager and checked this(dont know how to speak in English):
Second, open COLOROS tool,click start and it will show the situation like what happened to you.
NOW,check Device Manager again.
Has three ways.
1.shows 9006 and MMC storage.COLOROS tool wil continue later.
2.shows QHSUSB_BULK with a yellow ! before,means no driver.
3.shows unknown device,means not enough elec.
You should be the second way.
Third,Disable Signed Driver Enforcement in Windows 7 or later.
My laptop company's suggestion:
http://acer.custhelp.com/app/answer...windows-10:-disable-signed-driver-enforcement
After that, reinstall the bricked driver and everything will be in way 1.
At last,wait for the imgs downloading,unplug microUSB,press power and reboot twice,then you can unlock bootloader and do what you want.

sino1641 said:
Morning,my friend.
I tried to brick my OPO for testing.
Here's the solution.
First,open Device Manager and checked this(dont know how to speak in English):
Second, open COLOROS tool,click start and it will show the situation like what happened to you.
NOW,check Device Manager again.
Has three ways.
1.shows 9006 and MMC storage.COLOROS tool wil continue later.
2.shows QHSUSB_BULK with a yellow ! before,means no driver.
3.shows unknown device,means not enough elec.
You should be the second way.
Third,Disable Signed Driver Enforcement in Windows 7 or later.
My laptop company's suggestion:
http://acer.custhelp.com/app/answer...windows-10:-disable-signed-driver-enforcement
After that, reinstall the bricked driver and everything will be in way 1.
At last,wait for the imgs downloading,unplug microUSB,press power and reboot twice,then you can unlock bootloader and do what you want.
Click to expand...
Click to collapse
Thanks for replying!
Sadly, your suggestion didn't work, I plugged in the OPO, opened Msm8974DownloadTool.exe and clicked "Start", closed drivers manager and reopened it and nothing changed (It was like your first screenshot)
EDIT: And yes, I'm on Test Mode + Allow Unsigned Drivers

MrPowerGamerBR said:
Thanks for replying!
Sadly, your suggestion didn't work, I plugged in the OPO, opened Msm8974DownloadTool.exe and clicked "Start", closed drivers manager and reopened it and nothing changed (It was like your first screenshot)
EDIT: And yes, I'm on Test Mode + Allow Unsigned Drivers
Click to expand...
Click to collapse
Open Device Manager.
Press Power &Vol Up for about 10 seconds.
See if it will change between 9008 and 9006.

I have same thing did it work
I am just wondering if u managed to fix it.

I had the exact same issue. To stop the device from disconnecting, I needed to remove all existing drivers, let the phone charge, plug it into the PC. Hold volume up + power until the PC recognises it. Then I used the color OS flashing tool.
I had to run it as administrator, and it worked fine on Windows 10, without anything extra. However remember you'll lose all your stuff. Lucky for me I had a backup of my entire phone on my PC when I switched file system to F2FS.
This issue in itself has really baffled me. It happened to me when flashing sultans rom, and the phone completely bricked. However I'm using the rom now after fully recovering the device... I guess it's just down to bad luck?

mark1320 said:
I am just wondering if u managed to fix it.
Click to expand...
Click to collapse
Nope, never fixed it, I don't even have the device anymore (now rocking a Moto G Turbo)

mark1320 said:
I am just wondering if u managed to fix it.
Click to expand...
Click to collapse
Don't use "msm8974-download-manager" use qfil to recover the phone. Worked for me.
http://www.androidbrick.com/ultimate-qualcomm-snapdragon-unbrick-guide-snapdragons-are-unbrickable-qhsusb_dload_qpst_qfil/

Download 2012 qhs diagnostic driver and use xp machine.It will work just fine.

install a fresh windows either x32/x64 winxp/win 7 extract color OS and install the correct drivers

[Help][xperia f3113][dead]

Hello, excuse my bad english I'm using google translate.
The problem I have is that my xperia xa is dead.
the reason of it, was that I wanted to flash the rom of my cell to remove the applications that come with the mobile company.
when I realized my error, was that I did the following, in the flash tool, in the rom selection, I made the error, not selecting the following settings:
-APPS_LOG
-DIAG
-QNOVO
-USERDATA
-CUST-RESET
as shown in the following image:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
when the flash operation ended, the cell phone did not want to turn it on, the only function it had and has so far, is that it does not vibrate, it does not turn on, it does not go into flash or fastboot mode, it's dead, it just turns on the red led.
when I try to perform the flash operation again, I simply get the following message when I connect the device.
in the windows device manager, recognizes the phone as "usb serial device (com)".
I searched the net, and I did not find the solution to this problem, I appreciate your attention, and I expect some help.
PD: I already tried the connection with pc companion, and even the function from system symbol of windows with the tool fastboot to flash the boot, with the img.
the problem is that the device does not go into any mode

1990macsfull said:
Hello, excuse my bad english I'm using google translate.
The problem I have is that my xperia xa is dead.
the reason of it, was that I wanted to flash the rom of my cell to remove the applications that come with the mobile company.
when I realized my error, was that I did the following, in the flash tool, in the rom selection, I made the error, not selecting the following settings:
-APPS_LOG
-DIAG
-QNOVO
-USERDATA
-CUST-RESET
as shown in the following image:
when the flash operation ended, the cell phone did not want to turn it on, the only function it had and has so far, is that it does not vibrate, it does not turn on, it does not go into flash or fastboot mode, it's dead, it just turns on the red led.
when I try to perform the flash operation again, I simply get the following message when I connect the device.
in the windows device manager, recognizes the phone as "usb serial device (com)".
I searched the net, and I did not find the solution to this problem, I appreciate your attention, and I expect some help.
PD: I already tried the connection with pc companion, and even the function from system symbol of windows with the tool fastboot to flash the boot, with the img.
the problem is that the device does not go into any mode
Click to expand...
Click to collapse
2 times so far, my XA died the same way after trying to flash a mod. Both times I was eventually able to resurrect it by holding down various combinations of buttons while plugging and unplugging, trying different cables, etc. The second time, it wouldn't do anything until the next day, and then it suddenly came to life when using a different cable and plugging into the wall while holding power and volume down. I would try it. I'm not too familiar with flashtool on XA. I have used it for 3 years with my Z1c and never hard bricked a phone with it. Seems like X series have a little bit different rules, but I don't see why your phone would hard-brick just because you didn't wipe a few partitions... Also good idea to check in with FT thread.

If the computer does recognize it, maybe you need to reinstall your usb drivers. If its not, then u have a big problem with it, before making anything you need to see if there is a way to connect it by Fastboot, and install his custom TWRP. if u are able to do that, there is a sollution for you.
Remember always to install your usb flash drivers, and the fastboot drivers too.

Same problem my XA F3113 is dead. The LOG says everything was ok but after disconnect it from PC the phone dies.
Look like exist a way to get it back to life but we need the SCATTERED FILE.
Can somebody share us the SCATTERED FILE of this Model?

Really appreciate this guy....
Awesome person. He had recover my dead XA ultra through online. Just with 500 INR.
wrundawan said:
Whats app me +918147499618 I can help you to fix your dead phone.
Click to expand...
Click to collapse

i have a same problem
please help. my phone f3113 is dead after downgrade

wrundawan said:
Whats app me +918147499618 I can help you to fix your dead phone.
Click to expand...
Click to collapse
Be careful this guy is a cheater he cheated $30 from me

Who the hell has cheated you?
Check your paypal with your open eyes since you had raised claim on your money inside paypal your money was refunded by them. And I am helpless as I didn't got your money.
mballe francois said:
Be careful this guy is a cheater he cheated $30 from me
Click to expand...
Click to collapse

mtk scatter

Phone dead ?.

Hello , basicelly can't do anything with my phone atm, when i boot it goes in fastboot mode but my computer can't detect him tried to install google driver / adb / fastboot
i got access to twrp but not mtp when i try do to a wipe no matter how i got the error failed to mount /persist invalid argument / myflash dosn't reconize my device at all , tried with several cable same thing
Don't know what to do anymore does someone have any clue ? thanks

evolve17x said:
Hello , basicelly can't do anything with my phone atm, when i boot it goes in fastboot mode but my computer can't detect him tried to install google driver / adb / fastboot
i got access to twrp but not mtp when i try do to a wipe no matter how i got the error failed to mount /persist invalid argument / myflash dosn't reconize my device at all , tried with several cable same thing
Don't know what to do anymore does someone have any clue ? thanks
Click to expand...
Click to collapse
Mi Flash, TWRP , so the bootloader is unlocked?
Try on another pc.

Mi Flash, TWRP , so the bootloader is unlocked? Yes
It's also not detected with another computer ....

evolve17x said:
Mi Flash, TWRP , so the bootloader is unlocked? Yes
It's also not detected with another computer ....
Click to expand...
Click to collapse
Maybe the USB port of the phone is faulty.
And with the charger?

yeah could be that, but the phone charge with no problem at all. wonder what to do now

evolve17x said:
yeah could be that, but the phone charge with no problem at all. wonder what to do now
Click to expand...
Click to collapse
I had the same case, charging but no data transmission, I changed the USB charging connector with flexible cable and Microphone.
Relatively easy to change and inexpensive.

Thanks, do you think this kinds of thing would do the trick ? https://www.amazon.fr/RongZy-Connec...TTD9ZD8/ref=pd_lpo_2?pd_rd_i=B09TTD9ZD8&psc=1

evolve17x said:
Thanks, do you think this kinds of thing would do the trick ? https://www.amazon.fr/RongZy-Connec...TTD9ZD8/ref=pd_lpo_2?pd_rd_i=B09TTD9ZD8&psc=1
Click to expand...
Click to collapse
I saw on aliexpress that there are different models depending on the ram.
is there glue in this kit?

Oh well, no glue in this kit it's really cheap i will try, kit in aliexpress make too mutch time to come sadly i hope it's compatible with my phone

evolve17x said:
Oh well, no glue in this kit it's really cheap i will try, kit in aliexpress make too mutch time to come sadly i hope it's compatible with my phone
Click to expand...
Click to collapse
https://m.fr.aliexpress.com/item/1005001496572577.html

Soo i changed the connector but still the same problem can't get detected via fastboot / twrp / bootloader by both adb devices / or miflashtool with driver installed don't know what to do anymore ...

evolve17 said:
Soo i changed the connector but still the same problem can't get detected via fastboot / twrp / bootloader by both adb devices / or miflashtool with driver installed don't know what to do anymore ...
Click to expand...
Click to collapse
Connector+map?
Where did you buy?

Just this
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
do i have to change this also ?
It's from amazon coming from china

evolve17 said:
Just this View attachment 5689307 do i have to change this also ? View attachment 5689311
It's from amazon coming from china
Click to expand...
Click to collapse
Yeap.
USB Power Charging Board Connector Plug Port Dock With Mainboard Motherboard Flex Cable​.
As I said on a post above, there are several models depending on the ram.
But are you the author of this thread or another with an almost identical nickname?

I receive the official loading port in the week I will see (for my version of the phone), yes it is my other account whose identifiers I have forgotten.
After a factory reset the bootloader is supposed to be relock?
Don't know maybe my phone is just stuck with bootloader locked for wathever reason. Because the resseler of my old charging port told me that the phone should be detected soo ...
I miss my poco f2 soo mutch , can't wait for it to work again ...

evolve17 said:
After a factory reset the bootloader is supposed to be relock?
..
Click to expand...
Click to collapse
Nope.

Soo got https://m.fr.aliexpress.com/item/1005001496572577.html today mounted it still the same problem can't get otg / my computer to reconise the phone ... next step i will try to change the motherboard flex cable ... ****ing hell i'm soo done

evolve17 said:
Soo got https://m.fr.aliexpress.com/item/1005001496572577.html today mounted it still the same problem can't get otg / my computer to reconise the phone ... next step i will try to change the motherboard flex cable ... ****ing hell i'm soo done
Click to expand...
Click to collapse
Unlucky, but not so expensive.

I think the problem is more on the motherboard side but i will see but i hope not ,
With my meager knowledge of electronics I think the flex cable is only used for charging but I could be wrong.
if so I will probably go to another brand for a future purchase

evolve17 said:
I think the problem is more on the motherboard side but i will see but i hope not ,
With my meager knowledge of electronics I think the flex cable is only used for charging but I could be wrong.
if so I will probably go to another brand for a future purchase
Click to expand...
Click to collapse
From the usb port to the motherboard it seems to me that there is only the map that connects them.