Hi! Today I was trying to update my 1+6 to Android 10. I always make a wipe in my phone and later I flash the zip of the OTA. Well, in this case, my phone doenst want to turn up on recovery mode and I can't make anything. I can enter to fastboot mode (to use msmdownloadtool) and my phone there is in cmd fastboot devices, but not in msmdownloadtool. I have installed all the drivers,I have used ALL IN ONE TOOL, I have changed the usb ports but my phone is not in device manager on windows. It is frustating and it never happened to me.
Sorry for my bad english, and thank you for reading!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Use msndownloadtool, but you're doing it wrong, you need to get in download mode in order for msn to work, to do that you need to unplug any cable from your phone and shut down your phone, connect a cable to your pc, hold vol up in your phone, plug in cable from PC, nothing is going to pop up in your phone but you can hear a sound in your pc, now you can use msn tool to reinstall oos, let me know if i helped you out
Use this method??
Hi if you are able to go to fastboot then just download fastboot Rom for Android 10 and flash it through fastboot.
If you get problem in flashall.bat then just edit that in notepad and delete -w and save that file then try flashing again. Once done it will boot into stock recovery, erase all data and then reboot. everything will work fine
J0nhy said:
Use msndownloadtool, but you're doing it wrong, you need to get in download mode in order for msn to work, to do that you need to unplug any cable from your phone and shut down your phone, connect a cable to your pc, hold vol up in your phone, plug in cable from PC, nothing is going to pop up in your phone but you can hear a sound in your pc, now you can use msn tool to reinstall oos, let me know if i helped you out
Click to expand...
Click to collapse
No.. I hear the sound and my phone is in download mode, but doesn't appear on devices manager of windows. I don't know what happened. The msmdownload is on blank, no devices are listed in
rahulbhola123 said:
Hi if you are able to go to fastboot then just download fastboot Rom for Android 10 and flash it through fastboot.
If you get problem in flashall.bat then just edit that in notepad and delete -w and save that file then try flashing again. Once done it will boot into stock recovery, erase all data and then reboot. everything will work fine
Click to expand...
Click to collapse
Hi! I get problem with flashall.bat, but when I opene it on Notepad and deleted the "-w" It says me "cannot load logo.img" or something like that jajajaj.
Marcos2310 said:
Hi! I get problem with flashall.bat, but when I opene it on Notepad and deleted the "-w" It says me "cannot load logo.img" or something like that jajajaj.
Click to expand...
Click to collapse
You're not using msn you're using the fastboot one
Try this one instead this is the msntool, it will restore your device to life
https://forum.xda-developers.com/oneplus-6/how-to/op6-collection-unbrick-tools-t3914109
J0nhy said:
You're not using msn you're using the fastboot one
Try this one instead this is the msntool, it will restore your device to life
https://forum.xda-developers.com/oneplus-6/how-to/op6-collection-unbrick-tools-t3914109
Click to expand...
Click to collapse
Nop, the problem is that my phone is not being recognized anymore by the tool..
Marcos2310 said:
Hi! I get problem with flashall.bat, but when I opene it on Notepad and deleted the "-w" It says me "cannot load logo.img" or something like that jajajaj.
Click to expand...
Click to collapse
Did you tried without deleting the -w
Marcos2310 said:
Hi! Today I was trying to update my 1+6 to Android 10. I always make a wipe in my phone and later I flash the zip of the OTA. Well, in this case, my phone doenst want to turn up on recovery mode and I can't make anything. I can enter to fastboot mode (to use msmdownloadtool) and my phone there is in cmd fastboot devices, but not in msmdownloadtool. I have installed all the drivers,I have used ALL IN ONE TOOL, I have changed the usb ports but my phone is not in device manager on windows. It is frustating and it never happened to me.
Sorry for my bad english, and thank you for reading!
Click to expand...
Click to collapse
https://forum.xda-developers.com/oneplus-6/how-to/rom-stock-fastboot-roms-oneplus-6-t3796665
Marcos2310 said:
Nop, the problem is that my phone is not being recognized anymore by the tool..
Click to expand...
Click to collapse
Try with different cables, your cable might be the problem
Any update?
Related
I will be straightforward:
I bought an used OPO, I booted it up, configured the phone, took a photo and then decided to reboot it (turn off and then turn on), then my device simply hard bricked.
1. I already tried turning it on, the device does nothing (no vibration).
2. I already tried using Power + Vol Up and Power + Vol Down, nothing happens (no vibration).
3. Windows recognizes the device as "QHSUSB_BULK", I already tried installing the drivers and using ColorOS flashing tool from here http://forum.xda-developers.com/oneplus-one/general/guide-unbrick-oneplus-one-t3013732 , the device IS RECOGNIZED by the tool, but when I start flashing, it starts a loop when trying to flash the "8974_msimage.mbn" file (the progress bar goes until the end and then the process repeat in the same file).
Yes, the device has the bootloader unlocked, because the previous owner flashed a custom ROM, custom kernel and SuperSU.
No, the device isn't recognized by adb.
No, the device isn't recognized by fastboot.
I already tried searching on Google for this issue, everyone who had this issue never replied saying that they fixed the issue...
I never had any kind of soft/hard brick on my Moto G 2014 (and I flashed custom ROMs constantly on it)... so... can someone help me? Thanks!
I'm also willing to give 5$ on PayPal to someone who can fix this issue.
Also, if I try to use the ColorOS flashing tool, the device disconnects in the middle of the process, causing the infinite flash loop.
First, if you have a computer which installed Windows XP, just flash the ROM with COLOROS tool.
Second,if you a using Windows7 or later,,give me a photo of what the COLOROS tool showed.
Thanks for forgiving my poor English
sino1641 said:
First, if you have a computer which installed Windows XP, just flash the ROM with COLOROS tool.
Second,if you a using Windows7 or later,,give me a photo of what the COLOROS tool showed.
Thanks for forgiving my poor English
Click to expand...
Click to collapse
Nah, your english is fine, I could understand what you are saying.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
After I clicked "Start"
Then the "device plugged in" sound plays and the process repeats...
It keeps doing this:
(If you can't view the images, click here:
http://lori.mrpowergamerbr.com/sharex/Msm8974DownloadTool_2016-07-22_10-39-42.png
http://lori.mrpowergamerbr.com/sharex/Msm8974DownloadTool_2016-07-22_10-40-18.png
http://lori.mrpowergamerbr.com/sharex/2016-07-22_10-41-05.gif
)
Morning,my friend.
I tried to brick my OPO for testing.
Here's the solution.
First,open Device Manager and checked this(dont know how to speak in English):
Second, open COLOROS tool,click start and it will show the situation like what happened to you.
NOW,check Device Manager again.
Has three ways.
1.shows 9006 and MMC storage.COLOROS tool wil continue later.
2.shows QHSUSB_BULK with a yellow ! before,means no driver.
3.shows unknown device,means not enough elec.
You should be the second way.
Third,Disable Signed Driver Enforcement in Windows 7 or later.
My laptop company's suggestion:
http://acer.custhelp.com/app/answer...windows-10:-disable-signed-driver-enforcement
After that, reinstall the bricked driver and everything will be in way 1.
At last,wait for the imgs downloading,unplug microUSB,press power and reboot twice,then you can unlock bootloader and do what you want.
sino1641 said:
Morning,my friend.
I tried to brick my OPO for testing.
Here's the solution.
First,open Device Manager and checked this(dont know how to speak in English):
Second, open COLOROS tool,click start and it will show the situation like what happened to you.
NOW,check Device Manager again.
Has three ways.
1.shows 9006 and MMC storage.COLOROS tool wil continue later.
2.shows QHSUSB_BULK with a yellow ! before,means no driver.
3.shows unknown device,means not enough elec.
You should be the second way.
Third,Disable Signed Driver Enforcement in Windows 7 or later.
My laptop company's suggestion:
http://acer.custhelp.com/app/answer...windows-10:-disable-signed-driver-enforcement
After that, reinstall the bricked driver and everything will be in way 1.
At last,wait for the imgs downloading,unplug microUSB,press power and reboot twice,then you can unlock bootloader and do what you want.
Click to expand...
Click to collapse
Thanks for replying!
Sadly, your suggestion didn't work, I plugged in the OPO, opened Msm8974DownloadTool.exe and clicked "Start", closed drivers manager and reopened it and nothing changed (It was like your first screenshot)
EDIT: And yes, I'm on Test Mode + Allow Unsigned Drivers
MrPowerGamerBR said:
Thanks for replying!
Sadly, your suggestion didn't work, I plugged in the OPO, opened Msm8974DownloadTool.exe and clicked "Start", closed drivers manager and reopened it and nothing changed (It was like your first screenshot)
EDIT: And yes, I'm on Test Mode + Allow Unsigned Drivers
Click to expand...
Click to collapse
Open Device Manager.
Press Power &Vol Up for about 10 seconds.
See if it will change between 9008 and 9006.
I have same thing did it work
I am just wondering if u managed to fix it.
I had the exact same issue. To stop the device from disconnecting, I needed to remove all existing drivers, let the phone charge, plug it into the PC. Hold volume up + power until the PC recognises it. Then I used the color OS flashing tool.
I had to run it as administrator, and it worked fine on Windows 10, without anything extra. However remember you'll lose all your stuff. Lucky for me I had a backup of my entire phone on my PC when I switched file system to F2FS.
This issue in itself has really baffled me. It happened to me when flashing sultans rom, and the phone completely bricked. However I'm using the rom now after fully recovering the device... I guess it's just down to bad luck?
mark1320 said:
I am just wondering if u managed to fix it.
Click to expand...
Click to collapse
Nope, never fixed it, I don't even have the device anymore (now rocking a Moto G Turbo)
mark1320 said:
I am just wondering if u managed to fix it.
Click to expand...
Click to collapse
Don't use "msm8974-download-manager" use qfil to recover the phone. Worked for me.
http://www.androidbrick.com/ultimate-qualcomm-snapdragon-unbrick-guide-snapdragons-are-unbrickable-qhsusb_dload_qpst_qfil/
Download 2012 qhs diagnostic driver and use xp machine.It will work just fine.
install a fresh windows either x32/x64 winxp/win 7 extract color OS and install the correct drivers
Hello, excuse my bad english I'm using google translate.
The problem I have is that my xperia xa is dead.
the reason of it, was that I wanted to flash the rom of my cell to remove the applications that come with the mobile company.
when I realized my error, was that I did the following, in the flash tool, in the rom selection, I made the error, not selecting the following settings:
-APPS_LOG
-DIAG
-QNOVO
-USERDATA
-CUST-RESET
as shown in the following image:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
when the flash operation ended, the cell phone did not want to turn it on, the only function it had and has so far, is that it does not vibrate, it does not turn on, it does not go into flash or fastboot mode, it's dead, it just turns on the red led.
when I try to perform the flash operation again, I simply get the following message when I connect the device.
in the windows device manager, recognizes the phone as "usb serial device (com)".
I searched the net, and I did not find the solution to this problem, I appreciate your attention, and I expect some help.
PD: I already tried the connection with pc companion, and even the function from system symbol of windows with the tool fastboot to flash the boot, with the img.
the problem is that the device does not go into any mode
1990macsfull said:
Hello, excuse my bad english I'm using google translate.
The problem I have is that my xperia xa is dead.
the reason of it, was that I wanted to flash the rom of my cell to remove the applications that come with the mobile company.
when I realized my error, was that I did the following, in the flash tool, in the rom selection, I made the error, not selecting the following settings:
-APPS_LOG
-DIAG
-QNOVO
-USERDATA
-CUST-RESET
as shown in the following image:
when the flash operation ended, the cell phone did not want to turn it on, the only function it had and has so far, is that it does not vibrate, it does not turn on, it does not go into flash or fastboot mode, it's dead, it just turns on the red led.
when I try to perform the flash operation again, I simply get the following message when I connect the device.
in the windows device manager, recognizes the phone as "usb serial device (com)".
I searched the net, and I did not find the solution to this problem, I appreciate your attention, and I expect some help.
PD: I already tried the connection with pc companion, and even the function from system symbol of windows with the tool fastboot to flash the boot, with the img.
the problem is that the device does not go into any mode
Click to expand...
Click to collapse
2 times so far, my XA died the same way after trying to flash a mod. Both times I was eventually able to resurrect it by holding down various combinations of buttons while plugging and unplugging, trying different cables, etc. The second time, it wouldn't do anything until the next day, and then it suddenly came to life when using a different cable and plugging into the wall while holding power and volume down. I would try it. I'm not too familiar with flashtool on XA. I have used it for 3 years with my Z1c and never hard bricked a phone with it. Seems like X series have a little bit different rules, but I don't see why your phone would hard-brick just because you didn't wipe a few partitions... Also good idea to check in with FT thread.
If the computer does recognize it, maybe you need to reinstall your usb drivers. If its not, then u have a big problem with it, before making anything you need to see if there is a way to connect it by Fastboot, and install his custom TWRP. if u are able to do that, there is a sollution for you.
Remember always to install your usb flash drivers, and the fastboot drivers too.
Same problem my XA F3113 is dead. The LOG says everything was ok but after disconnect it from PC the phone dies.
Look like exist a way to get it back to life but we need the SCATTERED FILE.
Can somebody share us the SCATTERED FILE of this Model?
Really appreciate this guy....
Awesome person. He had recover my dead XA ultra through online. Just with 500 INR.
wrundawan said:
Whats app me +918147499618 I can help you to fix your dead phone.
Click to expand...
Click to collapse
i have a same problem
please help. my phone f3113 is dead after downgrade
wrundawan said:
Whats app me +918147499618 I can help you to fix your dead phone.
Click to expand...
Click to collapse
Be careful this guy is a cheater he cheated $30 from me
Who the hell has cheated you?
Check your paypal with your open eyes since you had raised claim on your money inside paypal your money was refunded by them. And I am helpless as I didn't got your money.
mballe francois said:
Be careful this guy is a cheater he cheated $30 from me
Click to expand...
Click to collapse
mtk scatter
Hello folks, please help me ASAP, as I have no other devices in me and both my private and work related things are associated with my phone so...
I was doing this and since im noob I was going step by step so i dont mess something and yet that happened. you can read from there what I was doing and what happened.
Basically I tried to flash firmware by executing line by line of commands and now my phone is dark (nothing can be done with physically clicking the buttons). Its connected with the PC so sometimes i can hear that USB sounds you know.. Anyway, can you please assist me how to proceed and go back to normal ?
Open device manager and look for Qualcomm
if you see that your Device is in EDL Mode.
Try this tool
lolinet mirrors - firmware, software, iso etc.
lolinet mirrors - powered by h5ai
mirrors.lolinet.com
sd_shadow
Nope, nothing with qualcomm in my device manager.
And after running "bank-flash" my device now rebooted to fastboot.
KomitaMKD said:
sd_shadow
Nope, nothing with qualcomm in my device manager.
And after running "bank-flash" my device now rebooted to fastboot.
Click to expand...
Click to collapse
ok, I'm not sure what the flashing problem is.
rerun
Code:
fastboot getvar all
sd_shadow said:
ok, I'm not sure what the flashing problem is.
rerun
Code:
fastboot getvar all
Click to expand...
Click to collapse
I pressed the button to start the mobile and now its stuck/taking too long on the motorola logo.
running the bank flash file in this state gives me this now
Code:
working path= C:\Users\trajk\Downloads\rescuetool_JimnyPlus_64
Loading Da...
Loading Da OK!
Loading Scatter file...
ChecksumLevel = 2!
Loading Scatter file success!
Loading AuthFile...
Loading Auth OK!
Waiting for com port cable insert...
Please insert comport...
KomitaMKD said:
I pressed the button to start the mobile and now its stuck/taking too long on the motorola logo.
running the bank flash file in this state gives me this now
Code:
working path= C:\Users\trajk\Downloads\rescuetool_JimnyPlus_64
Loading Da...
Loading Da OK!
Loading Scatter file...
ChecksumLevel = 2!
Loading Scatter file success!
Loading AuthFile...
Loading Auth OK!
Waiting for com port cable insert...
Please insert comport...
Click to expand...
Click to collapse
Blankflash only works with EDL Mode (black screen)
10 minutes later im still stuck on the Motorola - Powered by Android logo
So, how do I proceed now?
Try this guide, my friend: https://forum.xda-developers.com/t/...your-bricked-motorola-moto-one-macro.4145191/
VD171 said:
Try this guide, my friend: https://forum.xda-developers.com/t/...your-bricked-motorola-moto-one-macro.4145191/
Click to expand...
Click to collapse
Im not sure how to use this
Official Stock Rom by LOLINET: https://mirrors.lolinet.com/firmware/moto/lima/official
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
KomitaMKD said:
So, how do I proceed now?
Click to expand...
Click to collapse
You need to reboot to fastboot mode, unplug USB, and hold the volume button and power, till you see the fastboot screen.
You have
Code:
ro.carrier: reteu
sd_shadow said:
You have
Code:
ro.carrier: reteu
Click to expand...
Click to collapse
Okay that did the work now my phone is off - black after i pressed the buttons...
Now which one should i download? Should i use the Android 10 one or the 9 one you mentoined previously (if its the same). btw before i do anything i had android 9 running with the november patch
I tried that Android 10 and this is what i did.
Extracted Mediatek and the firmware in same folder, did the cmd thing from the xml through the spanish web site, ran the bat file and nothing happened.
Now ill be trying with the android 9 version
Okay guys im not able to successfully run the flashfile.bat
I tried with the (Optional) Automatic BAT file made by Eufracio López and it did the trick!!! I was able to flash Android 10!
KomitaMKD said:
I tried with the (Optional) Automatic BAT file made by Eufracio López and it did the trick!!! I was able to flash Android 10!
Click to expand...
Click to collapse
Nice job, my friend.
I would like to thank you all who spared some of your
VD171 said:
Nice job, my friend.
Click to expand...
Click to collapse
Thanks to you and @sd_shadow , I really appreciate your quick assistance
KomitaMKD said:
Hello folks, please help me ASAP, as I have no other devices in me and both my private and work related things are associated with my phone so...
I was doing this and since im noob I was going step by step so i dont mess something and yet that happened. you can read from there what I was doing and what happened.
Basically I tried to flash firmware by executing line by line of commands and now my phone is dark (nothing can be done with physically clicking the buttons). Its connected with the PC so sometimes i can hear that USB sounds you know.. Anyway, can you please assist me how to proceed and go back to normal ?
Click to expand...
Click to collapse
Hi @KomitaMKD this is vignesh , i am also using Moto One Macro device , Lastweek i have thought to flash my mobile due to some reason first time my device became brick... I am not ble to do anything its come startup failure ! Message .... I felt really bad ... Then almost i tried 8 hrs continuously for recovering my phone.. finally i found it. I recovered my mobile. Below i will give a link just go through it , that will help your mobile to become normal.
[RECOVER][UNBRICK][BLANKFLASH] How unbrick your bricked Motorola Moto One Macro
This script was made by Eufracio López (yehison). Thank you very much ! 1. First, you have to download required contents: Minimal ADB and Fastboot Tool: https://androidmtk.com/download-minimal-adb-and-fastboot-tool Motorola Device Manager...
forum.xda-developers.com
When I tried to install Android 12 beta2 for my 4a, I accidentally deleted the boot file, which caused my phone to go black. There was no response when I pressed the power button, and the bootloader was not displayed. I connected my 4a to the computer via usb, and the device manager showed QUSB_BULK_CID:xxxx_SN:xxxxxxxx. How can I repair my phone.
accidentally deleted???????
i mean how did you just wiped boot partition or flashed wrong boot image
please explain so that i can help you.
[email protected] said:
accidentally deleted???????
i mean how did you just wiped boot partition or flashed wrong boot image
please explain so that i can help you.
Click to expand...
Click to collapse
My English is very poor, use google translation, please forgive me. I’m not sure if I deleted something. I unzipped the image package to platform-tools and ran flash-all.bat. I still have an error. I didn’t put the phone in the boot loader state but the system state. . When I ran flash-all.bat, the phone went black for an instant, and then there was the situation I said, I couldn't boot up, the screen was completely black, and I couldn't enter the boot loader.
speak in native language i will use google translate.
first thing try to connect your phone to pc {windows} and go to devices and printer in control panel. and see if some thing shows up like unknown device in it.
[email protected] said:
speak in native language i will use google translate.
first thing try to connect your phone to pc {windows} and go to devices and printer in control panel. and see if some thing shows up like unknown device in it.
Click to expand...
Click to collapse
I connect the phone to the pc, the device manager shows this
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
so, good news your phone is alive.
[email protected] said:
so, good news your phone is alive.
Click to expand...
Click to collapse
Really？, what should i do
now try to get into bootloader mode and flash boot image of 12beta2 using fastboot flash boot.img
[email protected] said:
now try to get into bootloader mode and flash boot image of 12beta2 using fastboot flash boot.img
Click to expand...
Click to collapse
I can't enter the bootloader, this is a problem
[email protected] said:
now try to get into bootloader mode and flash boot image of 12beta2 using fastboot flash boot.img
Click to expand...
Click to collapse
When I press the power button, the phone screen is completely black and nothing happens
wait brother i have to look up. may be you have hard bricked it. but worry not i am working to find solution just be online for a while.
[email protected] said:
wait brother i have to look up. may be you have hard bricked it. but worry not i am working to find solution just be online for a while.
Click to expand...
Click to collapse
OK i am online
can you send me link of 12beta2 file you flashed and you device full name.
is it pixel 4a 4G or pixel 4a 5G.
is pixel 4a.
Factory Images for Nexus and Pixel Devices | Google Play services | Google for Developers
developer.android.com
[email protected] said:
can you send me link of 12beta2 file you flashed and you device full name.
is it pixel 4a 4G or pixel 4a 5G.
Click to expand...
Click to collapse
which one you flashed 4G or 5G and which method you used
my phone is pixel 4a 4g and flashed 4g
I think my situation is the same as his situation
ok, bro just listen :- your phone is hard bricked.
next:- to recover your phone just use qualcomm edl tool.
here is the video to help you with.
press like if i helped thanks this works 100%
[email protected] said:
ok, bro just listen :- your phone is hard bricked.
next:- to recover your phone just use qualcomm edl tool.
here is the video to help you with.
press like if i helped thanks this works 100%
Click to expand...
Click to collapse
OK I am watching
[email protected] said:
ok, bro just listen :- your phone is hard bricked.
next:- to recover your phone just use qualcomm edl tool.
here is the video to help you with.
press like if i helped thanks this works 100%
Click to expand...
Click to collapse
I can't find pixel 4a firehose
So i was trying to install twrp and it failed and the phone displayed this "the current image(boot/recovery) have been destroyed" and keeps turning on and off. Later it restarts and got stuck in the logo "Realme with powered by Android". I don't know what happened. I can't press volume up and power button. So I waited till it drains its battery. So I tried charging it back and it shows charging red. Then when it reaches to a point where it can turn on, It got stuck in the charging white logo thingy and it wont let me do anything.
But after a few tries it finally wont turn on.
I tried connecting it to the computer and somehow it shows an unknown driver.
QUSB_BULK_CID:0411_SN:B3336417
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I have no idea what that is but I know that "B3336417" is the ID of the phone.
Can anyone help me how to fix this phone?
Assuming you've correctly installed ADB driver on Windows 10 then if USB Debugging didn't get enabled on phone you'll NOT see the phone in Windows' Device Manager under Portable Devices - where it should be shown.
Try installing MTK Drivers, it should fix the problem
EDIT: Then flash Stock ROM using SP Flash Tool V5
jwoegerbauer said:
Assuming you've correctly installed ADB driver on Windows 10 then if USB Debugging didn't get enabled on phone you'll NOT see the phone in Windows' Device Manager under Portable Devices - where it should be shown.
Click to expand...
Click to collapse
I pressed volume up + volume down + power button and it takes me to fastboot mode. Do you know how to restore back the phone? where can I find the stock rom for realme 5i?
NoveNoki said:
Try installing MTK Drivers, it should fix the problem
EDIT: Then flash Stock ROM using SP Flash Tool V5
Click to expand...
Click to collapse
I pressed volume up + volume down + power button and it takes me to fastboot mode. Do you know how to restore back the phone? where can I find the stock rom for realme 5i?
Grim Face said:
I pressed volume up + volume down + power button and it takes me to fastboot mode. Do you know how to restore back the phone? where can I find the stock rom for realme 5i?
Click to expand...
Click to collapse
Here are official ROM files from all Realme phones: https://www.realme.com/eu/support/software-update just search for your phone and you should find it, tho you will need a computer so you can flash the files
EDIT: Do you know if your device uses MediaTek chip?
NoveNoki said:
Here are official ROM files from all Realme phones: https://www.realme.com/eu/support/software-update just search for your phone and you should find it, tho you will need a computer so you can flash the files
EDIT: Do you know if your device uses MediaTek chip?
Click to expand...
Click to collapse
My phone uses Snapdragon but I finally have OrangeFox recovery
NoveNoki said:
Here are official ROM files from all Realme phones: https://www.realme.com/eu/support/software-update just search for your phone and you should find it, tho you will need a computer so you can flash the files
EDIT: Do you know if your device uses MediaTek chip?
Click to expand...
Click to collapse
Can I flash my rom to the Orange Fox Recovery mode? It seems that my OS is gone.
Grim Face said:
Can I flash my rom to the Orange Fox Recovery mode? It seems that my OS is gone.
Click to expand...
Click to collapse
I think you should be able to, i am not too sure. But i whould recommend you to flash it manually using the fastboot mode, tho if you can try flashing it from the recovery