Database Info

My phone is not being recognized, bricked phone.

Hi! Today I was trying to update my 1+6 to Android 10. I always make a wipe in my phone and later I flash the zip of the OTA. Well, in this case, my phone doenst want to turn up on recovery mode and I can't make anything. I can enter to fastboot mode (to use msmdownloadtool) and my phone there is in cmd fastboot devices, but not in msmdownloadtool. I have installed all the drivers,I have used ALL IN ONE TOOL, I have changed the usb ports but my phone is not in device manager on windows. It is frustating and it never happened to me.
Sorry for my bad english, and thank you for reading!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Use msndownloadtool, but you're doing it wrong, you need to get in download mode in order for msn to work, to do that you need to unplug any cable from your phone and shut down your phone, connect a cable to your pc, hold vol up in your phone, plug in cable from PC, nothing is going to pop up in your phone but you can hear a sound in your pc, now you can use msn tool to reinstall oos, let me know if i helped you out

Use this method??
Hi if you are able to go to fastboot then just download fastboot Rom for Android 10 and flash it through fastboot.
If you get problem in flashall.bat then just edit that in notepad and delete -w and save that file then try flashing again. Once done it will boot into stock recovery, erase all data and then reboot. everything will work fine

J0nhy said:
Use msndownloadtool, but you're doing it wrong, you need to get in download mode in order for msn to work, to do that you need to unplug any cable from your phone and shut down your phone, connect a cable to your pc, hold vol up in your phone, plug in cable from PC, nothing is going to pop up in your phone but you can hear a sound in your pc, now you can use msn tool to reinstall oos, let me know if i helped you out
Click to expand...
Click to collapse
No.. I hear the sound and my phone is in download mode, but doesn't appear on devices manager of windows. I don't know what happened. The msmdownload is on blank, no devices are listed in

rahulbhola123 said:
Hi if you are able to go to fastboot then just download fastboot Rom for Android 10 and flash it through fastboot.
If you get problem in flashall.bat then just edit that in notepad and delete -w and save that file then try flashing again. Once done it will boot into stock recovery, erase all data and then reboot. everything will work fine
Click to expand...
Click to collapse
Hi! I get problem with flashall.bat, but when I opene it on Notepad and deleted the "-w" It says me "cannot load logo.img" or something like that jajajaj.

Marcos2310 said:
Hi! I get problem with flashall.bat, but when I opene it on Notepad and deleted the "-w" It says me "cannot load logo.img" or something like that jajajaj.
Click to expand...
Click to collapse
You're not using msn you're using the fastboot one
Try this one instead this is the msntool, it will restore your device to life
https://forum.xda-developers.com/oneplus-6/how-to/op6-collection-unbrick-tools-t3914109

J0nhy said:
You're not using msn you're using the fastboot one
Try this one instead this is the msntool, it will restore your device to life
https://forum.xda-developers.com/oneplus-6/how-to/op6-collection-unbrick-tools-t3914109
Click to expand...
Click to collapse
Nop, the problem is that my phone is not being recognized anymore by the tool..

Marcos2310 said:
Hi! I get problem with flashall.bat, but when I opene it on Notepad and deleted the "-w" It says me "cannot load logo.img" or something like that jajajaj.
Click to expand...
Click to collapse
Did you tried without deleting the -w

Marcos2310 said:
Hi! Today I was trying to update my 1+6 to Android 10. I always make a wipe in my phone and later I flash the zip of the OTA. Well, in this case, my phone doenst want to turn up on recovery mode and I can't make anything. I can enter to fastboot mode (to use msmdownloadtool) and my phone there is in cmd fastboot devices, but not in msmdownloadtool. I have installed all the drivers,I have used ALL IN ONE TOOL, I have changed the usb ports but my phone is not in device manager on windows. It is frustating and it never happened to me.
Sorry for my bad english, and thank you for reading!
Click to expand...
Click to collapse
https://forum.xda-developers.com/oneplus-6/how-to/rom-stock-fastboot-roms-oneplus-6-t3796665

Marcos2310 said:
Nop, the problem is that my phone is not being recognized anymore by the tool..
Click to expand...
Click to collapse
Try with different cables, your cable might be the problem

Any update?

Moto One Macro - Bricked Device

Hello folks, please help me ASAP, as I have no other devices in me and both my private and work related things are associated with my phone so...
I was doing this and since im noob I was going step by step so i dont mess something and yet that happened. you can read from there what I was doing and what happened.
Basically I tried to flash firmware by executing line by line of commands and now my phone is dark (nothing can be done with physically clicking the buttons). Its connected with the PC so sometimes i can hear that USB sounds you know.. Anyway, can you please assist me how to proceed and go back to normal ?

Open device manager and look for Qualcomm
if you see that your Device is in EDL Mode.

Try this tool
lolinet mirrors - firmware, software, iso etc.
lolinet mirrors - powered by h5ai
mirrors.lolinet.com

sd_shadow
Nope, nothing with qualcomm in my device manager.
And after running "bank-flash" my device now rebooted to fastboot.

KomitaMKD said:
sd_shadow
Nope, nothing with qualcomm in my device manager.
And after running "bank-flash" my device now rebooted to fastboot.
Click to expand...
Click to collapse
ok, I'm not sure what the flashing problem is.
rerun
Code:
fastboot getvar all

sd_shadow said:
ok, I'm not sure what the flashing problem is.
rerun
Code:
fastboot getvar all
Click to expand...
Click to collapse
I pressed the button to start the mobile and now its stuck/taking too long on the motorola logo.
running the bank flash file in this state gives me this now
Code:
working path= C:\Users\trajk\Downloads\rescuetool_JimnyPlus_64
Loading Da...
Loading Da OK!
Loading Scatter file...
ChecksumLevel = 2!
Loading Scatter file success!
Loading AuthFile...
Loading Auth OK!
Waiting for com port cable insert...
Please insert comport...

KomitaMKD said:
I pressed the button to start the mobile and now its stuck/taking too long on the motorola logo.
running the bank flash file in this state gives me this now
Code:
working path= C:\Users\trajk\Downloads\rescuetool_JimnyPlus_64
Loading Da...
Loading Da OK!
Loading Scatter file...
ChecksumLevel = 2!
Loading Scatter file success!
Loading AuthFile...
Loading Auth OK!
Waiting for com port cable insert...
Please insert comport...
Click to expand...
Click to collapse
Blankflash only works with EDL Mode (black screen)

10 minutes later im still stuck on the Motorola - Powered by Android logo

So, how do I proceed now?

Try this guide, my friend: https://forum.xda-developers.com/t/...your-bricked-motorola-moto-one-macro.4145191/

VD171 said:
Try this guide, my friend: https://forum.xda-developers.com/t/...your-bricked-motorola-moto-one-macro.4145191/
Click to expand...
Click to collapse
Im not sure how to use this
Official Stock Rom by LOLINET: https://mirrors.lolinet.com/firmware/moto/lima/official
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

KomitaMKD said:
So, how do I proceed now?
Click to expand...
Click to collapse
You need to reboot to fastboot mode, unplug USB, and hold the volume button and power, till you see the fastboot screen.

You have
Code:
ro.carrier: reteu

sd_shadow said:
You have
Code:
ro.carrier: reteu
Click to expand...
Click to collapse
Okay that did the work now my phone is off - black after i pressed the buttons...
Now which one should i download? Should i use the Android 10 one or the 9 one you mentoined previously (if its the same). btw before i do anything i had android 9 running with the november patch

I tried that Android 10 and this is what i did.
Extracted Mediatek and the firmware in same folder, did the cmd thing from the xml through the spanish web site, ran the bat file and nothing happened.
Now ill be trying with the android 9 version

Okay guys im not able to successfully run the flashfile.bat

I tried with the (Optional) Automatic BAT file made by Eufracio López and it did the trick!!! I was able to flash Android 10!

KomitaMKD said:
I tried with the (Optional) Automatic BAT file made by Eufracio López and it did the trick!!! I was able to flash Android 10!
Click to expand...
Click to collapse
Nice job, my friend.

I would like to thank you all who spared some of your
VD171 said:
Nice job, my friend.
Click to expand...
Click to collapse
Thanks to you and @sd_shadow , I really appreciate your quick assistance

KomitaMKD said:
Hello folks, please help me ASAP, as I have no other devices in me and both my private and work related things are associated with my phone so...
I was doing this and since im noob I was going step by step so i dont mess something and yet that happened. you can read from there what I was doing and what happened.
Basically I tried to flash firmware by executing line by line of commands and now my phone is dark (nothing can be done with physically clicking the buttons). Its connected with the PC so sometimes i can hear that USB sounds you know.. Anyway, can you please assist me how to proceed and go back to normal ?
Click to expand...
Click to collapse
Hi @KomitaMKD this is vignesh , i am also using Moto One Macro device , Lastweek i have thought to flash my mobile due to some reason first time my device became brick... I am not ble to do anything its come startup failure ! Message .... I felt really bad ... Then almost i tried 8 hrs continuously for recovering my phone.. finally i found it. I recovered my mobile. Below i will give a link just go through it , that will help your mobile to become normal.
[RECOVER][UNBRICK][BLANKFLASH] How unbrick your bricked Motorola Moto One Macro
This script was made by Eufracio López (yehison). Thank you very much ! 1. First, you have to download required contents: Minimal ADB and Fastboot Tool: https://androidmtk.com/download-minimal-adb-and-fastboot-tool Motorola Device Manager...
forum.xda-developers.com

Question Poco x3 Pro Hardbricked!

after i got into Fastboot Mode for a Longtime about 30mins.. my Phone got blackscreen and no sign of Light even in Notification Light. i tried to turn it on holding the Power Button for about 30sec or more it doesnt do anything.. soo i go to Device Manager and i see in ports that the Phone is detected with labaled name "Qualcom SDH 9008" and installed MiFlash Tool, and i was trying to Flash it when i press Refresh it detects as "COM3" after searching on YouTube for lot of many ways i didnt find any solution like FireHose File to bypass MiFlash Auth. but i didnt see anything for Poco x3 Pro. no luck!
i already TestPoint the back of the Phone but the only Prob is the Auth thing in account to Proceed to Update firmare file .tgz
can someome help me pleaseee its been Day 4 of searching and still no luck! my Phone is sleeping for 4days now. and i dont have any Phone. im from Philippines by the way.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

PHnambawan said:
after i got into Fastboot Mode for a Longtime about 30mins.. my Phone got blackscreen and no sign of Light even in Notification Light. i tried to turn it on holding the Power Button for about 30sec or more it doesnt do anything.. soo i go to Device Manager and i see in ports that the Phone is detected with labaled name "Qualcom SDH 9008" and installed MiFlash Tool, and i was trying to Flash it when i press Refresh it detects as "COM3" after searching on YouTube for lot of many ways i didnt find any solution like FireHose File to bypass MiFlash Auth. but i didnt see anything for Poco x3 Pro. no luck!
i already TestPoint the back of the Phone but the only Prob is the Auth thing in account to Proceed to Update firmare file .tgz
can someome help me pleaseee its been Day 4 of searching and still no luck! my Phone is sleeping for 4days now. and i dont have any Phone. im from Philippines by the way.
View attachment 5333005
Click to expand...
Click to collapse
Listen to me carefully extract the .tgz file in a folder and download platform tools from the web and also extract platform tools files also in the same folder where you extracted the .tgz files after keeping both file extraction in a folder then turn your phone in. Fastboot mode and plug in and run the flash all .bat file it gonna take around 10-15 minutes and your device will recover

Did it solve your problem??

You are most likely in EDL mode. In order to get out of it, you need to snap off the battery and connect it back. Perhaps no flashing is needed

You can try to find authorized user patch for miflash somewhere on net but don't get your hope up as poco is relatively new

oleg.ignatov2011 said:
You are most likely in EDL mode. In order to get out of it, you need to snap off the battery and connect it back. Perhaps no flashing is needed
Click to expand...
Click to collapse
Does this method really work? im on Redmi Note 9 Pro, Hardbricked as well, and also stuck at edl authentication ehrn attempting to flash fastboot rom

oleg.ignatov2011 said:
You are most likely in EDL mode. In order to get out of it, you need to snap off the battery and connect it back. Perhaps no flashing is needed
Click to expand...
Click to collapse
Does This Method Work? Im on Redmi Note 9 pro hardbricked as well, I Also cant get past to Edl Authentication

Did you resolve the issues. and method used. I am also stucked in the same.
kiyookusanagi said:
Does This Method Work? Im on Redmi Note 9 pro hardbricked as well, I Also cant get past to Edl Authenticatio
Click to expand...
Click to collapse

If your computer is detected as QH 9008 or similar, it seems to be more of a hardware fault than a software one, since it indicates that the CPU is not having good communication with the UFS memory.

PHnambawan said:
i already TestPoint the back of the Phone but the only Prob is the Auth thing in account to Proceed to Update firmare file .tgz
Click to expand...
Click to collapse
How did you do this?
Can you explain the process step by step, pls.
I've tried with several different ways but no one works. Phone isn't getting in EDL.

Realme 5i phone dead but can be detected in Windows 10

So i was trying to install twrp and it failed and the phone displayed this "the current image(boot/recovery) have been destroyed" and keeps turning on and off. Later it restarts and got stuck in the logo "Realme with powered by Android". I don't know what happened. I can't press volume up and power button. So I waited till it drains its battery. So I tried charging it back and it shows charging red. Then when it reaches to a point where it can turn on, It got stuck in the charging white logo thingy and it wont let me do anything.
But after a few tries it finally wont turn on.
I tried connecting it to the computer and somehow it shows an unknown driver.
QUSB_BULK_CID:0411_SN:B3336417
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I have no idea what that is but I know that "B3336417" is the ID of the phone.
Can anyone help me how to fix this phone?

Assuming you've correctly installed ADB driver on Windows 10 then if USB Debugging didn't get enabled on phone you'll NOT see the phone in Windows' Device Manager under Portable Devices - where it should be shown.

Try installing MTK Drivers, it should fix the problem
EDIT: Then flash Stock ROM using SP Flash Tool V5

jwoegerbauer said:
Assuming you've correctly installed ADB driver on Windows 10 then if USB Debugging didn't get enabled on phone you'll NOT see the phone in Windows' Device Manager under Portable Devices - where it should be shown.
Click to expand...
Click to collapse
I pressed volume up + volume down + power button and it takes me to fastboot mode. Do you know how to restore back the phone? where can I find the stock rom for realme 5i?

NoveNoki said:
Try installing MTK Drivers, it should fix the problem
EDIT: Then flash Stock ROM using SP Flash Tool V5
Click to expand...
Click to collapse
I pressed volume up + volume down + power button and it takes me to fastboot mode. Do you know how to restore back the phone? where can I find the stock rom for realme 5i?

Grim Face said:
I pressed volume up + volume down + power button and it takes me to fastboot mode. Do you know how to restore back the phone? where can I find the stock rom for realme 5i?
Click to expand...
Click to collapse
Here are official ROM files from all Realme phones: https://www.realme.com/eu/support/software-update just search for your phone and you should find it, tho you will need a computer so you can flash the files
EDIT: Do you know if your device uses MediaTek chip?

NoveNoki said:
Here are official ROM files from all Realme phones: https://www.realme.com/eu/support/software-update just search for your phone and you should find it, tho you will need a computer so you can flash the files
EDIT: Do you know if your device uses MediaTek chip?
Click to expand...
Click to collapse
My phone uses Snapdragon but I finally have OrangeFox recovery

NoveNoki said:
Here are official ROM files from all Realme phones: https://www.realme.com/eu/support/software-update just search for your phone and you should find it, tho you will need a computer so you can flash the files
EDIT: Do you know if your device uses MediaTek chip?
Click to expand...
Click to collapse
Can I flash my rom to the Orange Fox Recovery mode? It seems that my OS is gone.

Grim Face said:
Can I flash my rom to the Orange Fox Recovery mode? It seems that my OS is gone.
Click to expand...
Click to collapse
I think you should be able to, i am not too sure. But i whould recommend you to flash it manually using the fastboot mode, tho if you can try flashing it from the recovery

Nokia 1.4 TA-1322 Help

Hello everyone, I need some help.
On november 2021 I purchased Nokia 1.4 and that day when alarm was ringing my phone screen frozen/stopped. Screen sensor and the buttons stopped was not responding. I googled immediately and found the way to turn off forzen Nokia 1.4 by pressing Wolume up + Power off buttons same time (Source: https://www.nokia.com/phones/en_int...-reboot-my-smartphone-when-its-not-responding ).
When my phone turned on again I was happy till the next restarting of my phone. My nokia get Stucked in a Reboot Loop.
Screen lights and when Android GO Logo appears it turns off again and again.
I tried to flash my phone using QFIL Tool but there was unsolved issue of Android ADB Interface driver. The QFIL Tool couldn't detected my device. Mybe it needed different keys combination when connectiong it to PC to boot.
QFIL Tool source: https://androidmtk.com/download-qualcomm-flash-image-loader-qfil
Than I unlocked bootloader using this command:
Code:
fastboot oem unlock-go
I thought it was boot or recovery fail and by the reason I downloaded the firmware from alien9firmware
Source: https://alien9firmware.com/index.php?a=downloads&b=file&id=1325
Because QFIL Tool did not work I flashed boot and recovery via ADB. I moved these two .img files to disk C and ran the following commands
Code:
fastboot devices
fastboot reboot bootloader
fastboot flash recovery c:\recovery.img
fastboot flash boot c:\boot.img
fastboot reboot bootloader
fastboot erase cache
fastboot reboot
Disconnect device
You guess what do you think guys happen
My nokia was still stucked in reboot Loop.
Than I googled smartphones with same Core Qualcome QM 215 and downloaded Nokia 8 and Nokia 6.2 TWRPs from twrp official website.
Source: https://twrp.me/Devices/Nokia/
ADB thrown me an error when I tried to flash Nokia 8 TWRP. "The file is too large and blablabla..."
Then I tried to flashed twrp-3.6.0_9-0-SLD_sprout(nokia6.2) with no errors.
I have never seen anything like that. When I press to "Power button + Volume down" buttons my phone shows the stock recovery again which has no matter.
Then I gooled so many times I and I made a decision that every smartphone with Qualcomm QM215 core has absolutely same bugs.
There are smartphones with this terrible Processor:
Smartphones with Qualcomm Snapdragon 215 processor
List of smartphones that works with Qualcomm Snapdragon 215 processor inside.
www.kimovil.com
Than I found this video. In this video he used dryer and it worked. Unfortunately I have not dryer and... It may works on our devices too, Who knows...
Than someone told me to use MiFlash tool to boot my device. I faced another problem the firmware backup was missing the boot_lock.bat file. I had to download Xiaomi Kenzo global firmware to copy and modify the .bat files to my firmware backup. That trying became my night mare. I accidently erased Bootloader.
Today I was searching how connect How to a connect phone with erased bootloader to pc and I found this:
[guide] repair hard bricked devices with deleted bootloader (sboot)
I'm writing this in android development section because this is only section for both models, i hope this is not a problem. Also i want to say thanks to sataccount from gsmhosting, he found working map at the end. This guide is for hard bricked...
forum.xda-developers.com
Than I connected my phone to pc via usb and opened Device manager. There appeared QHSUSB_BULK device missing driver.
Then I found the driver here: https://fixfirmware.com/qhsusb-bulk-driver/
At least I managed to connect my device to pc again. And now QFIL Tool detects my phone.
Problems never ends. I downloaded 5 firmwares from different websites and the emmc filefouse prog_emmc_firehose *** ddr.mbn and Rawprogram .xml files missing in all of them.
Do someone know where can I fount the emmc Firehose and Rawprogram .xml files?

Oleg69 said:
Problems never ends. I downloaded 5 firmwares from different websites and the emmc filefouse prog_emmc_firehose *** ddr.mbn and Rawprogram .xml files missing in all of them.
Do someone know where can I fount the emmc Firehose and Rawprogram .xml files?
Click to expand...
Click to collapse
Try it

optimusodd said:
Try it
Click to expand...
Click to collapse
I have downloaded the firmware but there is not prog_emmc_firehose.mbn in the archive
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Oleg69 said:
On november 2021 I purchased Nokia 1.4 and that day when alarm was ringing my phone screen frozen/stopped. Screen sensor and the buttons stopped was not responding. I googled immediately and found the way to turn off forzen Nokia 1.4 by pressing Wolume up + Power off buttons same time
Click to expand...
Click to collapse
When it's still under warranty ,why didn't you claim it ?

optimusodd said:
When it's still under warranty ,why didn't you claim it ?
Click to expand...
Click to collapse
It was gifted to me from abroad. You know...

S
Oleg69 said:
It was gifted to me from abroad. You know...O
Click to expand...
Click to collapse
So what was your end result because I'm currently in bootloop with an unlocked bootloader as well but not having much luck with many of the same avenues you spoke of.. anyone?

Absolutely no luck, you gotta take your phone to the service center or buy a new one as I did (another brand)

Absolutely not.. I refuse. If it's an android, there's a way. Thank God this is simply one of 8 phones I've currently got

Does unlocking the bootloader of this device put the device in boot loop. I want to unlock the bootloader coz I want to install custom ROM. Anyone tell me how to unlock the bootloader of this device without putting the device in boot loop.