HELP :(( - Tilt, TyTN II, MDA Vario III Windows Mobile ROM De

I just got a att tilt.. I have tryed to unlock it using the kaiser sim unlocker. At first it would just go to the load screen and it would say 0%... a white screen. so i looked for a posting with that. And i found this ------HardSPL will not install - WHITE SCREEN: SOLVED (UPDATE 01. March 2008)-----
on that i got all the way up to 95% and then I got a err message.. now all it will do is go to the load screen (white) and show 0% and then I follow the instructions.. and when I go to restart the phone it show the red,green,blue,white screen.. top left show
kais1*0
spl-1.56.0000
cpld-8
top right show
ruunbh
what happen please help.. this is the first time this ever do this to me.. i have ren unlocked programs from hear befor with np..

You should not create a new thread for which a forum already exists. Please post this question in the appropiate thread.
Here is your first freebie: http://forum.xda-developers.com/showthread.php?t=361039.
Additionally you should include what unlocker you tried to use.
Happy flashing.

bikepilot said:
I just got a att tilt.. I have tryed to unlock it using the kaiser sim unlocker. At first it would just go to the load screen and it would say 0%... a white screen. so i looked for a posting with that. And i found this ------HardSPL will not install - WHITE SCREEN: SOLVED (UPDATE 01. March 2008)-----
on that i got all the way up to 95% and then I got a err message.. now all it will do is go to the load screen (white) and show 0% and then I follow the instructions.. and when I go to restart the phone it show the red,green,blue,white screen.. top left show
kais1*0
spl-1.56.0000
cpld-8
top right show
ruunbh
what happen please help.. this is the first time this ever do this to me.. i have ren unlocked programs from hear befor with np..
Click to expand...
Click to collapse
you just posted this in the sim unlocker thread, no need to start a new thread about it. I bet someone will answer your question very shortly...in the thread.

cp1md2b said:
You should not create a new thread for which a forum already exists. Please post this question in the appropiate thread.
Here is your first freebie: http://forum.xda-developers.com/showthread.php?t=361039.
Additionally you should include what unlocker you tried to use.
Happy flashing.
Click to expand...
Click to collapse
that is the unlocker I am trying to us..

bikepilot said:
that is the unlocker I am trying to us..
Click to expand...
Click to collapse
This is no less than the 3rd post on this you have done.
You aren't going to continue getting help if you keep this up.

This was also just posted, and answered in Kaiser General... in another new thread.

Related

Need Help! Asap!!!!!!!!!

i was attempting to debrand my v1615 (UK) and after i hardSPL'd it and attempted get the HTC factory rom on i got an error saying Vendor ID error. so i need advise on geting around this or the original v1615 ROM. failing that my fone may take a swim tomorrow and ill have to inform the insurance
Are you sure you installed HardSPL properly?
yea well 99% sure it went thru ok. phone is stuck on the tri colour screen and cant do anything from there. wont even activsync so i cant try to run SPL again
bump******
kantosbrin said:
yea well 99% sure it went thru ok. phone is stuck on the tri colour screen and cant do anything from there. wont even activsync so i cant try to run SPL again
Click to expand...
Click to collapse
what does the tri-color screen say... give me all the text on it.
ok in the top right is says RUUNBH
and under that but on the left it says
KAIS130
spl-1.56.0000
cpld-8
then either USB or serial depending on if the cable is in or not.
hope u can help
See my post here.
jockyw2001 said:
See my post here.
Click to expand...
Click to collapse
In addition to what jockyw2001 said...
You do not have HardSPL installed. Please try again and follow the instructions to verify (after you can boot back into the OS).
ok i out my depth here lol! i no im being a pain but is there any way of solving this simply? because that thread i was just send to made no sense
sounds like you have a lot of reading to do... or maybe you have a friend who is well versed in these types of things...
Really quickly... you need to find and download mtty.exe (check the wiki) and then you should learn how to connect it to your device and follow the instructions from jockyw2001.

PLEASE HELP CANT HARDSPL phone

i just got my phone today and i cant hardspl it yet. i tried that the prof. sadi and all i got was a white screen, and then i went to his other forum and dl the 3 files flashed tried to flash those and all i got was a white screen again, ALL I GET IS THE WHITE SCREEN. PLEASE HELP, p.s. im not a noob, i have had a 8525 for like a year and ahalf and never had this problem. someone please help
You've already posted in the "HardSPL will not install - WHITE SCREEN" thread (this one), so there's no point continuing this thread....
If you read through the whole of the above thread, then you should be able to work out if there has been a fix or workaround posted for your particular issue; if not, post some more relevant info so that people can help - "PLEASE HELP!!!" is just gonna get you ignored
MODS: Please close this thread

stock on 0% flasahing rom

hello everybody
i started to flash a new rom
Ruu_Signed_Duttys_WM6.1_5.2.19700_Hybrid V2_1_65.14.06[No_CubeV2]
and i think i followd all the instractions but after starting the flashing it stock on 17% after removing the battery as the program said it wont go over 0%
firs i installed kaiser-HardSPLv1 and after that i started to flash the rom and its not working.
pls tell me what to do to save my nice phone
dannt
speebman said:
hello everybody
i started to flash a new rom
Ruu_Signed_Duttys_WM6.1_5.2.19700_Hybrid V2_1_65.14.06[No_CubeV2]
and i think i followd all the instractions but after starting the flashing it stock on 17% after removing the battery as the program said it wont go over 0%
firs i installed kaiser-HardSPLv1 and after that i started to flash the rom and its not working.
pls tell me what to do to save my nice phone
dannt
Click to expand...
Click to collapse
"think" you followed all the directions?
sorry for my bad english or leak of knolge in this part of the world i just read so much regarding this subject ant the more i read the more i got confused
so i just sow the first logical faq and followd him, plz i need my phone all my life is in their, help me.
danny
speebman said:
hello everybody
i started to flash a new rom
Ruu_Signed_Duttys_WM6.1_5.2.19700_Hybrid V2_1_65.14.06[No_CubeV2]
and i think i followd all the instractions but after starting the flashing it stock on 17% after removing the battery as the program said it wont go over 0%
firs i installed kaiser-HardSPLv1 and after that i started to flash the rom and its not working.
pls tell me what to do to save my nice phone
dannt
Click to expand...
Click to collapse
Things that will help others help you:
1. where are you located?
2. who is your provider
3. what ROM WERE you on?
4. ok - you had a phone that was working - and you did:
a. what did you do first?
b. second?
c. etc.
Your message KINDA indicates that you flashed a ROM and had issues - so you THEN flash HARDSPL? was that successful?
Bill
im from israel but my phone is from uk i think, my original rom was the HTC 6.1
i just run the kaiser-HardSPLv1 program and then i started flashing the rom duty 6.1 rom and it stoped at 17% like the program said i removed the batery and started the flashing prosse again but now it doesny even go above 0%, now im stock in the tri color screan
its writen
kais130
spl-3.28.0000
cpld-8
and usb in the littel whait screan
speebman said:
im from israel but my phone is from uk i think, my original rom was the HTC 6.1
i just run the kaiser-HardSPLv1 program and then i started flashing the rom duty 6.1 rom and it stoped at 17% like the program said i removed the batery and started the flashing prosse again but now it doesny even go above 0%, now im stock in the tri color screan
its writen
kais130
spl-3.28.0000
cpld-8
and usb in the littel whait screan
Click to expand...
Click to collapse
you don't have hardSPL installed..! surprise, surprise
u don't have hardspl flashed from bootloader info u provided. flash hardspl be4 flashing any roms.
please search and read; this has been answered many times.
p.s. use the new hardspl by jocky which is a sticky in this forum.
speebman said:
im from israel but my phone is from uk i think, my original rom was the HTC 6.1
i just run the kaiser-HardSPLv1 program and then i started flashing the rom duty 6.1 rom and it stoped at 17% like the program said i removed the batery and started the flashing prosse again but now it doesny even go above 0%, now im stock in the tri color screan
its writen
kais130
spl-3.28.0000
cpld-8
and usb in the littel whait screan
Click to expand...
Click to collapse
OK - I do not think that you got the HARDSPL installed on your phone correctly - BECAUSE - I believe that it would say OLIPOF or JOCKY on it and it does not.
I have not seen the new HARDSPL 328 and 329 but it LOOKS like to me that you did not successfully get the HARDSPL on your phone.
Personally - I would scan the message boards for GSLEON3 (user name) and send him a private message - there are many others that can help you and he or others MAY come trolling by and take pity on you - but at the moment he is the one that helps people in your situation the most from what I have seen.
I would NOT continue to work on it myself as you can definitely mess your phone up permanently. Does your phone still go into boot loader mode? If so - can you flash the required HARDSPL onto your phone?
Find a message that GSLEON3 has left and then lik on his name and send him a private message - he is very nice - BUT - he is VERY busy - continue to be nice and he will most likely get you back and running.
Bill
first of all thank u for the help
but, wich one i need? 28 or 29?
and how do i do this spl if i cant copy them to my device.
danny
speebman said:
first of all thank u for the help
but, wich one i need? 28 or 29?
and how do i do this spl if i cant copy them to my device.
danny
Click to expand...
Click to collapse
Danny -
Deep cleansing breaths here ok?
1. personally - I would PUT BACK what ever you had on your phone and get it running again - trying at this point to get ot to go to a different ROM is not a good idea right at this minute.
2. 28 and 29 from what I read makes no difference - users try each one to see which one works better on THEIR flashed ROM.
3. What I would do is look for the HARDSPL that goes with what you had loaded to begin with - or the actual SPL that came with your original ROM and put that one back.
I would be stuck here because I have to use JUMPSPL on my phone because I get the white screen - but I THINK that (don't quote me because I do not do it this way) if you don't get the white screen you can just flash the HARDSPL to your phone without JUMPSPL (having to be able to copy something to your phone.
HOWEVER - if you cannot or do not know how to continue from reading the WIKI - you MUST request help from a professional - I have already recommended one. (GSLEON3)
Bill
my active sink is not seeing the devais, maby MTTY? wil help
speebman said:
my active sink is not seeing the devais, maby MTTY? wil help
Click to expand...
Click to collapse
Based on your current track record, I wouldn't suggest you use MTTY as you have a VERY HIGH probability of bricking your phone (ie: it won't ever be usable again).
so im fu--.
Can you get the phone into the bootloader mode? Turn the phone off (pull the battery if you have to) then press and hold the camera button while you turn the phone on. You should get to a tri-color screen (this is the boot loader). Now plug in the USB cord and see if it switches from saying Serial to USB. If so, you can try flashing AN OFFICIAL ROM THAT WAS MEANT FOR YOUR PHONE (ie: Don't try to put an offical AT&T rom on an Orange). When you run the RUU program it will tell you that you need to have ActiveSync working, but don't worry about that. If your phone in bootloader shows USB, you can continue on.
BUT AGAIN... You need the Official rom that was meant for your device. Since you are not HardSPL'd you have to do it this way.
If you don't understand any of that, or have questions, don't just try it hoping you get it right...
As stated previously, it would be well worth you time to get someone like GSLEON to assist if you can.
mfrazzz said:
Can you get the phone into the bootloader mode? Turn the phone off (pull the battery if you have to) then press and hold the camera button while you turn the phone on. You should get to a tri-color screen (this is the boot loader). Now plug in the USB cord and see if it switches from saying Serial to USB. If so, you can try flashing AN OFFICIAL ROM THAT WAS MEANT FOR YOUR PHONE (ie: Don't try to put an offical AT&T rom on an Orange). When you run the RUU program it will tell you that you need to have ActiveSync working, but don't worry about that. If your phone in bootloader shows USB, you can continue on.
BUT AGAIN... You need the Official rom that was meant for your device. Since you are not HardSPL'd you have to do it this way.
If you don't understand any of that, or have questions, don't just try it hoping you get it right...
As stated previously, it would be well worth you time to get someone like GSLEON to assist if you can.
Click to expand...
Click to collapse
thank you!!!!!!1
i have flashed to my priviuas rom the original 6.1 htc rom and now its ok!!!
tnk
speebman said:
thank you!!!!!!1
i have flashed to my priviuas rom the original 6.1 htc rom and now its ok!!!
tnk
Click to expand...
Click to collapse
Cool. Glad that worked for you.... NOW, your next task is to read and understand ALL the steps before you try flashing a custom rom. HardSPL that sucker (but understand and follow EVERY step before you try that) and then you should be good to go...
my only problem is that their are so many strings of information and so many threads even wiki is confusing.
i will try to do this after i will make some order it all of this.
tnx again 4 the help
danny
speebman said:
my only problem is that their are so many strings of information and so many threads even wiki is confusing.
i will try to do this after i will make some order it all of this.
tnx again 4 the help
danny
Click to expand...
Click to collapse
Yes it is, but if you read this sticky at the top, it should help (start with noob guide which is the first link I think):
http://forum.xda-developers.com/showthread.php?t=369282
speebman said:
my only problem is that their are so many strings of information and so many threads even wiki is confusing.
i will try to do this after i will make some order it all of this.
tnx again 4 the help
danny
Click to expand...
Click to collapse
Not to be mean but if you have red Wiki and looked at threads here and they "don't make sense to you". You really have no business flashing a rom. If you don't understand what you are doing sooner or later you will brick your phone from your lack of knowledge and it will be no ones fault but your own.
I am really surprised people were willing to repeat what has been typed out hundreds and hundreds of times on these forums.
Welcome to XDA

Bricked HTC TyTn II - RGB-screen!!

Hi all,
After some time (and a lot of reading) I decided it was time to flash my TyTnII.
My preferred ROM was: NoThrills_WM61_NLD_V3.exe
To unlock my TyTnII, I used: JumpSPL1.56-KAIS.exe
The original version (as shipped) was:
R 1.27.12.32
G 22.45.88.07H
D 1.56.00.00
SPL-1.93.0000 (? not sure of this one)
image version: 1.56.405.5
When installing the ROM, it stopped at 19%, giving a communication error.
Next I followed the instructions given by the boot-loader, trying to restore. No luck there. After removing battery etc, I came back to the RGB screen.
On the screen it says:
RUUNBH/
KAIS130/
SPL-1.93.0000/
CPLD-8
There are (still) no cards (SIM/SD) in the device.
I tought I did everything as it was mentionned on the site, I thought I had read everything... Las, NOT!
Now there is no way to get the device up and running again. I always go back to the RGB-screen. It won't even restore the "manufacturer default", when doing so, it just goes back to the RGB-screen.
When reading different threads (my God, they are many!) I found some info on different spl's, radio's, and boot loaders. Could this have to do with this?
And of course, since I'm stuck at this screen, ActiveSync isn't so Active anymore. Trying another SPL won't work...
Does anyone know how to revive my beloved device?
Help will be appreciated!
Gert Beckers
Belgium
attachement: "RGB"-screen (it's not mine, number may differ!)
... I forgot
... to mention that I had a WM5-device and I would like to have a WM6-device. That was the main reason for the flash-attempt.
Thanx in advance!
Gert Beckers
It happen to me too I did some search and found that you need to download mtty I thing 1.6 select usb and there was two command you have to exeute and it should work for some reason you can't flash the rom to it from sd on 193. I will try to get you the command later if you haven't found them in here . good luke. let me know how you make out.
regards
Possible solution...
Hi!
The same thing happend to me two days ago.
The only solution is to install the original "Shiped ROM". Try with this one, because mine TyTN II rejected every other with error "Invalid Vendor":
http://www.asia.htc.com/download/RU..._radio_sign_22.51.88.13_1.27.15.32R2_Ship.exe
Good Luck!
Thank you for your quick reply!
Indeed, I forgot to mention that I already tried th MTTY. When I start the application and try to open the USB, it says 'USB will not open'.
I tried it also on another PC, just to be on the safe side, same result
No luck there.
I suspect the solution is to be found in the numbers!?
Kind regards,
Gert Beckers
Mmm,
Vladb,
Thank you for your quick response!
But, when I install the original shipped ROM, shouldn't it be the same version? Your link is clearly another version!
Could you send me a link with some more versions? Maybe European ones (english).
Sir Thanks-a-lot,
Gert Beckers
Hi,
Try searching this forum for "tri color" no quotes, there should be enough responses there to get you started.
Ta
Dave
Actualy this is WWE English version for phones from Hong Kong. I bought mine in the U.S, but since it was ment for Asia, this is the link you need. Also, this is updated ROM... your original was: 1.56.XXXX, and this is 1.82.XXXX
I saw from your first post that you have the same version like I do.
Try it,
Best regards!
BTW, mine is up and running, and more stable!
vladb,
Thanks a lot, I just got somewhat closer... but the installer stops after 1%, giving the "invalid vender ID". I will try to post the screenshot.
Clearly the device is not unlocked...
Does any one have any idea?
Sir Thanks-a-lot,
Gert Beckers
Picture of the vendor ID
GertBeckers said:
vladb,
Thanks a lot, I just got somewhat closer... but the installer stops after 1%, giving the "invalid vender ID". I will try to post the screenshot.
Clearly the device is not unlocked...
Does any one have any idea?
Sir Thanks-a-lot,
Gert Beckers
Click to expand...
Click to collapse
See my other post above, but also, your original ROM is can be dowloaded here: http://wiki.xda-developers.com/index.php?pagename=Kaiser_ROMs
Download and flash that. Once you back in Windows Mobile, see the stop sticky on this forum, in post #2 there are clear steps on flashing Hard SPL.
Thanks
Dave
Dave,
Thank you very much, downloading the ROM, as we write ;-)
However, could you possibly mail me a link to this forum you are talking about, just to be on the safe side? when i looked for it, I found some 70 results...
Thanks-a-lot!
Gert Beckers
OK... the next thing I would try is to download shiped ROM's from: http://wiki.xda-developers.com/index.php?pagename=Kaiser_ROMs
and try to install one by one.
That is if you don't know your phone region.
If you do know...
Good Luck!
GertBeckers said:
Dave,
Thank you very much, downloading the ROM, as we write ;-)
However, could you possibly mail me a link to this forum you are talking about, just to be on the safe side? when i looked for it, I found some 70 results...
Thanks-a-lot!
Gert Beckers
Click to expand...
Click to collapse
I don't know which one will help you most, but if you ensure the thread in the "Kaiser ROM Development" forum, you'll just have to skim read them to see which ones have a solution at the bottom and see if the symptoms match yours.
From skim reading the posts myself, flashing the ROM I gave you should let you back into Windows Mobile. Once there you "MUST" flash Hard SPL, before trying anything else. (Instructions & FAQ are in the Hard SPL sticky post #2).
Thanks
Dave
Dave,
If ever, I was a beautiful woman, with blond hairs and long legs, this would be your luky day!
Up and running again!
GertBeckers said:
Dave,
If ever, I was a beautiful woman, with blond hairs and long legs, this would be your luky day!
Up and running again!
Click to expand...
Click to collapse
Glad I could help. And now I know how to help people with "Stuck at Tri Colour Screen" problems. You learn something new every day.
Ta
Dave
GertBeckers said:
Hi all,
After some time (and a lot of reading) I decided it was time to flash my TyTnII.
My preferred ROM was: NoThrills_WM61_NLD_V3.exe
To unlock my TyTnII, I used: JumpSPL1.56-KAIS.exe
The original version (as shipped) was:
R 1.27.12.32
G 22.45.88.07H
D 1.56.00.00
SPL-1.93.0000 (? not sure of this one)
image version: 1.56.405.5
When installing the ROM, it stopped at 19%, giving a communication error.
Next I followed the instructions given by the boot-loader, trying to restore. No luck there. After removing battery etc, I came back to the RGB screen.
On the screen it says:
RUUNBH/
KAIS130/
SPL-1.93.0000/
CPLD-8
There are (still) no cards (SIM/SD) in the device.
I tought I did everything as it was mentionned on the site, I thought I had read everything... Las, NOT!
Now there is no way to get the device up and running again. I always go back to the RGB-screen. It won't even restore the "manufacturer default", when doing so, it just goes back to the RGB-screen.
When reading different threads (my God, they are many!) I found some info on different spl's, radio's, and boot loaders. Could this have to do with this?
And of course, since I'm stuck at this screen, ActiveSync isn't so Active anymore. Trying another SPL won't work...
Does anyone know how to revive my beloved device?
Help will be appreciated!
Gert Beckers
Belgium
attachement: "RGB"-screen (it's not mine, number may differ!)
Click to expand...
Click to collapse
Did I miss the part where you flashed HardSPL? Because it's not listed in your steps above. Flashing a ROM with JumpSPL is just begging for this to happen.
I've added my steps to fix this to the Wiki at http://wiki.xda-developers.com/index.php?pagename=Kaiser_Stuck_at_bootloader.
This has been linked to on the on the ROM Upgrading section of the HTC_Kaiser page and the ROM Flashing FAQ page.
Ok so I have some what of a similar problem...
I haven't flashed my phone in months. But for some reason, I turned my phone off this morning and when I went to turn it back on I am now stuck in boot-loader, and nothing works.. can't get it up and running.
This is odd..
just says:
KAIS130
SPL-3.29.Hard
CPLD-8
and in the white screen "serial"
Anyone know why this has happened?
kjb86 said:
I haven't flashed my phone in months. But for some reason, I turned my phone off this morning and when I went to turn it back on I am now stuck in boot-loader, and nothing works.. can't get it up and running.
This is odd..
just says:
KAIS130
SPL-3.29.Hard
CPLD-8
and in the white screen "serial"
Anyone know why this has happened?
Click to expand...
Click to collapse
Try flashing your original shipped ROM.

Kaiser sim locked problem

Hi, I am new here.this forum is very usefull in windows mobile..
I have tried one of the software posted here.. Kaiserunlocker... which is processed in 123 steps accordingly...
I had done step 1 the phone is ok
in step 2 the phone goes dark with verious colours grany screen
I dont understand how to revive from this problem.. please give some Idea..
I would be appricated.
tanks.
My HTC phone Model is -KAIS100 (AT&T)
aliarjun said:
Hi, I am new here.this forum is very usefull in windows mobile..
I have tried one of the software posted here.. Kaiserunlocker... which is processed in 123 steps accordingly...
I had done step 1 the phone is ok
in step 2 the phone goes dark with verious colours grany screen
I dont understand how to revive from this problem.. please give some Idea..
I would be appricated.
tanks.
My HTC phone Model is -KAIS100 (AT&T)
Click to expand...
Click to collapse
Can you soft reset? Can you hard reset? You need to read a lot more that what you have read. This site ( Kaiser ) has the best help thread on XDA... Olipof has one in all unlocker that you should have used.
I just tried that tool a few days ago,had the same problem while flashing the kaiser of a friend...
to get it to work I did the following:
I manually installed the 3.29Hard2 SPL from cmonex using jump spl,
then used the tool you use for the sim unlock.
I think that the problem is that that tool doesn't connect via usb when it reaches the bootloader.
thanks for the kind concerns,
But one thing I dont understand, the set is in grany screen... (startup is ok but it goes to grany screen {blank} while main windows appears)
Please tell me how to put jump spl. manually?
also hard reset is not processing. how to do it?
aliarjun said:
thanks for the kind concerns,
But one thing I dont understand, the set is in grany screen... (startup is ok but it goes to grany screen {blank} while main windows appears)
Please tell me how to put jump spl. manually?
also hard reset is not processing. how to do it?
Click to expand...
Click to collapse
rtfw
You need to read son, read like you have never read before. Then when you think you understand it your almost there. I have been reading for years and have yet to make my first rom guess it really comes down to time. Well the answers are there and yes you sometimes have to dig. But there is this handy search button at the top of the page third from the right if my memory is clear. And it now uses the google search engine to search this forum a function not here years ago. So your tools are there use them wisely young grass hopper and try not to post until you have read for some days. And please dont open another thread if you have a question such as how do i jump spl you should find the appropriate thread to post in.
thanks
nate
Duplicate thread.
Thread Closed
EDIT: Answer in this thread :http://forum.xda-developers.com/showthread.php?t=433835
Ta
Dave

Categories

Resources