Related
please while using shelltool. to upgrade wm5 to wm6 but ive just got an error message and suddenly lost my connection from activesync! please i dont know how to retrieve my phone! now after bootscreen... white screen appears and nothing happens! i tried hard reset it. nothing happens! please help!
i wish someone here could help me! please! im crying like a baby here! cant sleep! waiting for answers!
prinsipe21 said:
please while using shelltool. to upgrade wm5 to wm6 but ive just got an error message and suddenly lost my connection from activesync! please i dont know how to retrieve my phone! now after bootscreen... white screen appears and nothing happens! i tried hard reset it. nothing happens! please help!
i wish someone here could help me! please! im crying like a baby here! cant sleep! waiting for answers!
Click to expand...
Click to collapse
can you get it into bootloader (the coloured bars) ???
yes
yes sir i can!
prinsipe21 said:
yes sir i can!
Click to expand...
Click to collapse
Don't call me sir, mabe I'm younger than you
Well, then you are not the notsohappy owner of a brick
Get it into bootloader and flash your carrier's official rom
Also, see that in WM6 you must use only ActiveSync 4.5 or higher
Ask if you need help, I will be here for couple of hours and there are others who know way more than me and also can help
ill try it sir!
currently downloading .exe from htc site. dude is that an installer? do i need to flash it using other programs or not? thanks!
oh btw! i just used activesync 4.2 i am also want to upgrade my cingular 8125 to wm6 xplore1.1.. just like yours.. what steps i shall do? can u help me?
Read the wiki on how to unbrick your phone
NOTE: And don't double post
sorry sir, i just dont know what to do
anyone please help me
Get the rgb boot loader screen on by holding down camera while you reset. Then connect via usb to the pc. You will see the word " usb " appear on the bottom of the screen on your phone.
Run the exe you downloaded from your manufacturer / carriers website and it will install the stock rom.
Phone will reboot when finished.
Hey presto.
Dont panic son
Rather than just randomly flashing stuff, you need to read. Specifically:
http://forum.xda-developers.com/showthread.php?t=298613
It will step you through things and point you to the right posts to get you going. DON'T SKIP STEPS! DO Everything and check everything...
Good luck (and quit throwing "sir" around Way too formal)...
I agree
mfrazzz said:
Rather than just randomly flashing stuff, you need to read. Specifically:
http://forum.xda-developers.com/showthread.php?t=298613
It will step you through things and point you to the right posts to get you going. DON'T SKIP STEPS! DO Everything and check everything...
Good luck (and quit throwing "sir" around Way too formal)...
Click to expand...
Click to collapse
I agree what he said lol
anichillus said:
Don't call me sir, mabe I'm younger than you
Can we call you His Guru-ness instead?
Ask if you need help, I will be here for couple of hours and there are others who know way more than me and also can help
Perhaps, but you are certainly at the top end of the food chain here.
Click to expand...
Click to collapse
Anichillus--->You're funny, I edited it to be more true, less humble.
To the OP...don't panic, your wizard is not truly dead until the usb falls out and smoke comes trough all the cracks. Please do yourself a favor...READ READ READ READ READ...
READ THE WIKI, READ THE STICKIES...GET TO KNOW YOUR DEVICE COMPLETELY FIRST.
Anything you attempt, is done at your own risk...knowledge is power...understand your Wiz, be one with your Wiz.
Since morning i'm trying to find the link where i can download the WM6 undergroud version. Actually i tried installing WM6 Most beautiful, but i'm getting Update error [302] after 95% of installation. Mine is a G3 phone with IPL 2.26 and SPL 2.26
Thanks
Abhinandan
CID locked!
enggabhinandan said:
Since morning i'm trying to find the link where i can download the WM6 undergroud version. Actually i tried installing WM6 Most beautiful, but i'm getting Update error [302] after 95% of installation. Mine is a G3 phone with IPL 2.26 and SPL 2.26
Thanks
Abhinandan
Click to expand...
Click to collapse
The dreaded 95% error... He's right. Your Wizard is still CID locked.
Follow this thread to get your device CID unlocked and then try flashing WM6 again.
http://forum.xda-developers.com/showthread.php?t=285435
enggabhinandan said:
Since morning i'm trying to find the link where i can download the WM6 undergroud version. Actually i tried installing WM6 Most beautiful, but i'm getting Update error [302] after 95% of installation. Mine is a G3 phone with IPL 2.26 and SPL 2.26
Thanks
Abhinandan
Click to expand...
Click to collapse
i remember the time, when people were able to search info BEFORE stupid moves...now, my dear users, we have dying moloch named internet.
gl.
everbody is lazy now
when i first staring updating my wizard. I read for a few days because I wanted to make sure it was done right. People read one post and then try to flash there phone only to mess it up. I guess they have alot of money to buy more phones.
tomred said:
when i first staring updating my wizard. I read for a few days because I wanted to make sure it was done right. People read one post and then try to flash there phone only to mess it up. I guess they have alot of money to buy more phones.
Click to expand...
Click to collapse
If only we were all so rich... When I first started, I downloaded a WM6 Rom I found on this forum but read nothing... Tried to flash it, phone went to bootloader immediately afterwards and would do nothing else. I called T-Mobile and they sent me to the place on T-Mobile.com where I could get the official Rom download and was able to restore my MDA to life again but not until I had read about 20 different threads, did I attempt it again.
Thats the problem with some people here. They don't read and just assume that because they're a Software Dev that they automatically know everything or think that because they're pretty computer savvy that they know what they're doing or think that because they had their device for a few months that they're automatically an expert... It's annoying to tell you the truth because the only real way to learn is through a lot of reading, or trial and error and thats how everyone here has to learn.
I read this forum for a few MONTHS before I flashed my device, and I'm glad I did. Not only do you have to READ the information, but you also have give it time to SINK IN so that it is fully understood.
There are some people who automatically cry out for help without expending any effort (NOOBE needs help! give me a link, fix this, WAA WAA). And then there are the ones who make this a great forum, they READ READ and REREAD, TEST and RETEST and generally provide knowledge, information and assistance.
All of us are riding on the backs of the mostly unsung developers Like Faria, Bepe and all the others.
joemanb said:
I read this forum for a few MONTHS before I flashed my device, and I'm glad I did. Not only do you have to READ the information, but you also have give it time to SINK IN so that it is fully understood.
There are some people who automatically cry out for help without expending any effort (NOOBE needs help! give me a link, fix this, WAA WAA). And then there are the ones who make this a great forum, they READ READ and REREAD, TEST and RETEST and generally provide knowledge, information and assistance.
All of us are riding on the backs of the mostly unsung developers Like Faria, Bepe and all the others.
Click to expand...
Click to collapse
Exactly,very true cudn't have said much better than this,had sleepless nights,doubts,fears an what if this and what if that happened,read and reread the forums for weeks and posting question,only when as you say 'give it time to SINK IN so that it is fully understood' YUP! GOT IT !!! SMOOTHLY
Dharvey
Dan I'M BACK!! MY WIZARD IS FIXED THANKS TO SOME GOOD OLD FASHION SOLDERING SKILLS...
Hey buddy I'm so pleased you got it done,CONGRATS man
Why the hell do you want Underground????!!!!!!!!
It's old, unstable and has soooo many bugs that have all been resolved in recent ROMs. Have you just had the forum on pda view then jumped at the first WM6 ROM post from the early days?
I'm not interested with the Underground WM6 but when MB_WM6 did not work, i thought of trying that.
I have a question here, i tried installing MB_WM6 and it stopped at 95%, later i tried to install Faria's kitchen ROM and it was successful. I tried unlocking the CID with lokowiz03. Do u people still feel that my phone is still CID locked.
enggabhinandan said:
I'm not interested with the Underground WM6 but when MB_WM6 did not work, i thought of trying that.
I have a question here, i tried installing MB_WM6 and it stopped at 95%, later i tried to install Faria's kitchen ROM and it was successful. I tried unlocking the CID with lokowiz03. Do u people still feel that my phone is still CID locked.
Click to expand...
Click to collapse
Download WST tool and run it,it'll give all the info about your phone to determine the present status of your phone,only than it can be confirmed if it's cid locked or unlocked.
btw,faria's kitchen is for cooking the custom rom according to your own needs,it contains the Base Rom,OEM,RUU... and tools to build a rom.Did you cook your own Rom and flashed ?
joemanb said:
I read this forum for a few MONTHS before I flashed my device, and I'm glad I did. Not only do you have to READ the information, but you also have give it time to SINK IN so that it is fully understood.
There are some people who automatically cry out for help without expending any effort (NOOBE needs help! give me a link, fix this, WAA WAA). And then there are the ones who make this a great forum, they READ READ and REREAD, TEST and RETEST and generally provide knowledge, information and assistance.
All of us are riding on the backs of the mostly unsung developers Like Faria, Bepe and all the others.
Click to expand...
Click to collapse
Well said my friend... This is is how it should be. I think there should be a rule that have to be a member for so many weeks before you can even post and access download links on the forum... This should give you time to read before you make a mistake and brick your phone...
Thanks....i will surely search for WST tool. If u could post the link of the WST tool that will be of great help.
Thanks
Abhinandan
Hey........i found the link and also downloaded it.......thanks for the info
i tried flashing buttons ROM twice. The IPL version and others except SPL got changed to older one....but SPL remained the same 2.21, should itry flashing the buttons ROM again and again till SPL get changed to 1.01
now i installed the Xda_MiniS_LaunchROM_v154102 also even then the SPL version 2.21 only, how shall i change that to older one
enggabhinandan said:
now i installed the Xda_MiniS_LaunchROM_v154102 also even then the SPL version 2.21 only, how shall i change that to older one
Click to expand...
Click to collapse
do a soft reset of your phone , tap with stylus the soft reset button on the phone.the phone will reboot,see if it changes the spl,otherwise flash button's rom 1.05 a couple of more times and then do the soft reset,hope it'll change
Sorry...for posting the same info in a new thread......one more question here how to do a soft reset...is it by using ur WST tool. By keeping the power button pressed it will ask that device will be turned off....is this soft reset...or is there any other way to do
enggabhinandan said:
Sorry...for posting the same info in a new thread......one more question here how to do a soft reset...is it by using ur WST tool. By keeping the power button pressed it will ask that device will be turned off....is this soft reset...or is there any other way to do
Click to expand...
Click to collapse
To perform a soft reset,use the stylus to lightly press and hold the RESET button on the left side of your device,it's a small hole type just underneath Infrared port,you just can't miss it,ok
I simply tried unlocking CID from lokowiz even though my IPL/SPL was 1.05/2.21. I got the below results .....in the result it says CID unlocked, can any senior person have a look at the output say was CID really unlocked
Type the letter and press Enter: C
CID unlocking mobile... DO NOT DISCONNECT UNTIL THE PHONE REBOOTS!
Copying C:\lokiwiz02_173\Utils\itsutils.dll to WCE:\windows\itsutils.dll
CopyTFFSToFile(0x0, 0x10000, lock_backup.bin)
g=16: 314962fa - 121b40d192a81203
Key idx: 16
olddata: 55e9ed9a9ab801da460f100469464259621e8365aeb43277cf2858b925828379
newdata: 95ea23df0bf16432cf7be60912a5cbdedee342037c9d3bd3dee342037c9d3bd3
newsum=f6adec8d encsum=2ee6f10180a5c82d
This exe file was created with the evaluation version of Perl2Exe.
For more information visit http://www.indigostar.com
(The full version does not display this message with a 2 second delay.)
...
CopyFileToTFFS(cidunlocked.bin:0, 0, 00010000)
result=80072746
Your phone is now CID unlocked....
Store the generated 'lock_backup.bin' file in a safe place. It can help to resto
re your device if anything goes wrong.
ECHO is off.
"Standing on the shoulder of giants"
Ricardo Afonso, 2005
Hi,
I was trying to install the Dutty's WM 6.1 OS on my Boss's Tilt, didnt worked with the kaiser-HardSPLv1, and looked around for solution and found that i can copy "JumpSPL1.56-KAIS" and run it on the Tilt and than can install the OS, but somehow, its giving this 3 Color Screen and Serial and when i connect to USB, it shows USB instead of Serial, than when i try to install Dutty's OS, it comes up with Recovery option and doesnt finish successfully, it stays on 0% and than again goes back to Recovery option.
Please help me, will be enough if i can go back to where i was before installing anything or any way to Hard Reset and get back to the previous state before running JumpSPL1.56-KAIS.
Please reply ASAP.
Thank you,
Dhaval.
Oh For Goodness Sake........you Are Not Supposed To Use Jumpspl To Flash A Rom!!
Anyway to get back ?
Please give me solution.... please.
dhaval said:
Please give me solution.... please.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=396922
Try looking there.
Hi Southrnlake,
Thank you for your response.
I looked at a similar thread and after the white screen, i put the jumpspl on Tilt and ran it and thats how it got stuck on the 4 color screen.
My Screen Shows
KAIS1*0
SPL-1.93.0000
CPLD-8
on the right top corner the tri-color screen displays RUUNBH
and in the bottom White Screen(4th) it shows USB if its connected to USB o/w it shows Serial.
I can no longer connect to the PC using ActiveSync.
Please guide me to fix this problem.
Thanx in Advance.
Dhaval.
dhaval said:
Hi Southrnlake,
Thank you for your response.
I looked at a similar thread and after the white screen, i put the jumpspl on Tilt and ran it and thats how it bot stuck on the 3 color screen.
I can no longer connect to the PC using ActiveSync.
Please guide me to fix this problem.
Thanx in Advance.
Dhaval.
Click to expand...
Click to collapse
i have the same problem doesnt anybody know the answer
okans said:
i have the same problem doesnt anybody know the answer
Click to expand...
Click to collapse
most of us know how to answer and it has been answered many times... why don't u get off ur lazy ass and do some work by searching and reading around.
and to op rule 1: never install anything for anyone.
and secondly u have bad sector blocks which can be cleared using mtty ..again search and read.
THE SOLUTION FOR THE 10,000 TIME DEPENDS ON YOUR SPL VERSION.
FOR YOUR 1.93 SPL IT IS AS FOLLOWS:
USING MTTY ISSUE THE FOLLOWING COMMANDS:
cmd>set 16 0
cmd>task 8
FOR INFO ON USING MTTY, SEARCH & READ.
Thanx GSLEON3...
I am really very much thankful to you for showing that its possible to unbrick my Boss's Tilt.
I went thru this post and couldnt quite understood clearly as to what exactly i need to do, Please guide me what exactly i need to do as i dont want to play around anymore with my Boss's phone.
I searched and looked at this forum : http://forum.xda-developers.com/showthread.php?t=372497
I think this is the correct thread you might be mentioning to search, please correct me if i am wrong.
http://forum.xda-developers.com/showthread.php?t=371154&page=5
Please help me fix this.
Thank You,
Dhaval.
flash the damn thing with its original rom
Thanx to you All
Thank you very much all of you for your replies and keeping up the good work.
I did as GSLEON3 replied and that was it. So Easy. Very Happy.
Now, never touching or helping anybody with ROM Update.
dhaval said:
Thank you very much all of you for your replies and keeping up the good work.
I did as GSLEON3 replied and that was it. So Easy. Very Happy.
Now, never touching or helping anybody with ROM Update.
Click to expand...
Click to collapse
Well, If I would've known that I would NOT have helped you. This is a place of sharing knowledge & learning. If you're not willing to help others, well, you get the point.
GSLEON3 said:
Well, If I would've known that I would NOT have helped you. This is a place of sharing knowledge & learning. If you're not willing to help others, well, you get the point.
Click to expand...
Click to collapse
I think he meant on anyone elses phone it was his bosses phone. You know help someone out by trying to upgrade their phone and blowing it up.
-McMex
Some ppl don't understand what is the XDA comuninity about ...
Hello to everybody
I am having a strange problem with my kaiser vodafone, come up with white screen and does not work at all, is just possible have the tricolor screen using switch + camera keys, a this point I have tried to install new ROM, HARD SPL etc. the loading bar come up on screen but nothing happen,
I did plenty of suggestion reading around the forum but nothing is working, look like is a hardware faulty ????
So please if somebody expert on the matter can let me know something to do will be appraciate ...
thanks in advance
kissabout2002 said:
Hello to everybody
I am having a strange problem with my kaiser vodafone, come up with white screen and does not work at all, is just possible have the tricolor screen using switch + camera keys, a this point I have tried to install new ROM, HARD SPL etc. the loading bar come up on screen but nothing happen,
I did plenty of suggestion reading around the forum but nothing is working, look like is a hardware faulty ????
So please if somebody expert on the matter can let me know something to do will be appraciate ...
thanks in advance
Click to expand...
Click to collapse
please post this in the appropriate thread...like for example the HARDSPL thread. For example the one dealing with the white screen issue specifically. Try searching "hard spl white screen"
kissabout2002 said:
Hello to everybody
I am having a strange problem with my kaiser vodafone, come up with white screen and does not work at all, is just possible have the tricolor screen using switch + camera keys, a this point I have tried to install new ROM, HARD SPL etc. the loading bar come up on screen but nothing happen,
I did plenty of suggestion reading around the forum but nothing is working, look like is a hardware faulty ????
So please if somebody expert on the matter can let me know something to do will be appraciate ...
thanks in advance
Click to expand...
Click to collapse
for starters wrong thread .. secondly problem could have been completely avoided if you did the basic reading i.e. first hardspl .. if white screen than follow thread on white screen fix .. got hardspl? flash rom ... simple as that.
now u need help .. and instead of posting under the right thread you create a new redundant thread asking about a problem that quite a few people run into. in order for us to help we need info from your phone .. what does bootloader say? can u boot to operating system?
thesire said:
for starters wrong thread .. secondly problem could have been completely avoided if you did the basic reading i.e. first hardspl .. if white screen than follow thread on white screen fix .. got hardspl? flash rom ... simple as that.
now u need help .. and instead of posting under the right thread you create a new redundant thread asking about a problem that quite a few people run into. in order for us to help we need info from your phone .. what does bootloader say? can u boot to operating system?
Click to expand...
Click to collapse
sorry but I did not where put my problem, I did try to resolve it reading lots of other thread and I try lots of solution but nothing, anyway thanks for your help and time, so the problem with my kaiser is that it power up with white screen and nothing else happened then I have to take off the battery and put in again then pressing power button and camera I got the tricolor screen
http://www.ssb7.net/members/watch/image_view.php?path=http://www.ssb7.net/users/25415/&file=k3.jpg
connect to the computer running XP I try to update ROM or RADIO or SPL but the result is all the same this:
http://www.ssb7.net/members/watch/image_view.php?path=http://www.ssb7.net/users/25415/&file=k2.jpg
with the result on the computer:
http://www.ssb7.net/members/watch/image_view.php?path=http://www.ssb7.net/users/25415/&file=k1.jpg
a this point I have to take away the battery,
let me know if you need more information
thanks
Acky
You don't have hardspl installed. Install the hardspl, white screen fixed.
Follow the directions exactly. This is your freebie
http://forum.xda-developers.com/showthread.php?t=354061
P1Tater said:
You don't have hardspl installed. Install the hardspl, white screen fixed.
Follow the directions exactly. This is your freebie
http://forum.xda-developers.com/showthread.php?t=354061
Click to expand...
Click to collapse
thanks mate but how can I copy JumpSPL1.56-KAIS.exe to the device and run it if the device does not work ?
regards
Acky
well if nobody else is able to help I have to throw away this stupid expensive phone :-(
kissabout2002 said:
well if nobody else is able to help I have to throw away this stupid expensive phone :-(
Click to expand...
Click to collapse
Before you get too upset, have you tried posting in the correct thread? Just like was suggested over a week ago? Have you tried a hard reset? I don't see that anywhere in your steps you took. What about flashing a stock rom?
skatdawg said:
Before you get too upset, have you tried posting in the correct thread? Just like was suggested over a week ago? Have you tried a hard reset? I don't see that anywhere in your steps you took. What about flashing a stock rom?
Click to expand...
Click to collapse
thanks for help , I tried hard reset but then the same problem, about flash STOCK ROM how can I do that?
regards
Acky
kissabout2002 said:
thanks for help , I tried hard reset but then the same problem, about flash STOCK ROM how can I do that?
regards
Acky
Click to expand...
Click to collapse
You download the stock kaiser rom (searching is fun!), then you unrar, and click on the phone like button and follow the instructions. Then again, theres a thread on returning your phone to its original config. More searching fun!
kissabout2002 said:
well if nobody else is able to help I have to throw away this stupid expensive phone :-(
Click to expand...
Click to collapse
Don't trash, I will be happy to pay for shipping charges on it to ship it here
I cannot find UK VODAFONE STOCK ROM original 6.0, somebody knows where is possible found it?
thankssssss
i use t mob usa and already have an unlock tilt with the at&t rom (i think) it boots up showing the at&t logo and has a lot of at&t files. i want to load a new rom and have seen the rom for noobies thread but was wonder if i needed to do steps 1 - 3 or can i just download and load the rom without losing my lock and turning my phone into a brick. my friend has a dutty screen. any suggestions on a nice rom?
bigguyhawaii said:
i use t mob usa and already have an unlock tilt with the at&t rom (i think) it boots up showing the at&t logo and has a lot of at&t files. i want to load a new rom and have seen the rom for noobies thread but was wonder if i needed to do steps 1 - 3 or can i just download and load the rom without losing my lock and turning my phone into a brick. my friend has a dutty screen. any suggestions on a nice rom?
Click to expand...
Click to collapse
If you are already using that phone with T-Mo, then security unlock, hard spl and flash away! The best thing to do here is read read read! And dont be suprised if they move your thread! You can PM me though if you have any more questions! I will help you if I can!
sorry, just so that i dont turn my phone into a brick but what you are saying is that i can just flash my rom without any other steps.
thanks for the quick response.
bigguyhawaii said:
sorry, just so that i dont turn my phone into a brick but what you are saying is that i can just flash my rom without any other steps.
thanks for the quick response.
Click to expand...
Click to collapse
As far as what you mean by " lose my lock" I am not sure, but, you will need to CID unlock and hard-spl for sure! Do you have the AT&T Windows Mobile 6 or 6.1? I canot stress how important it is to read everything you can and be as informed as possible before you flash! I dont want to sound like I dont want to help (thats why we are here) But If you are already SIM unlocked it would still be wise to follow all the steps just to make sure you are covering all your bases, after all we do love our phones alot (often brought up by my sometimes jealous girlfriend! LOL! Read and use this...
http://forum.xda-developers.com/showthread.php?t=375583
Then if you get white screen dont panic just reset and go here follow instructions then go back and do the first one....
http://forum.xda-developers.com/showthread.php?t=354061
dashmaster1000 said:
As far as what you mean by " lose my lock" I am not sure, but, you will need to CID unlock and hard-spl for sure! Do you have the AT&T Windows Mobile 6 or 6.1? I canot stress how important it is to read everything you can and be as informed as possible before you flash! I dont want to sound like I dont want to help (thats why we are here) But If you are already SIM unlocked it would still be wise to follow all the steps just to make sure you are covering all your bases, after all we do love our phones alot (often brought up by my sometimes jealous girlfriend! LOL!
Click to expand...
Click to collapse
i have att windows 6.0. its already unlocked and i'm using on tmobile. what is
Hard-SPL? is this a file i should see on my phone?
bigguyhawaii said:
i have att windows 6.0. its already unlocked and i'm using on tmobile. what is
Hard-SPL? is this a file i should see on my phone?
Click to expand...
Click to collapse
No SPL is the bootloader on your phone when you hard SPL it keeps you from bricking your phone and allows you to flash non oem ROMs! If you Follow and read the links I just posted for you, you will be fine! I also use T-Mobile on a Tilt and I followed the steps and read alot and everything worked out perfect! I had to do the whitescreen fix, so it does work! I hope that helps!
P.S. Follow the instructions step by step, they are very important! Time consuming but worth it!
thank you very much
Please re-read the Newbies threads if you need an explanation as to what HardSPL is and how to install it and then flash a ROM. If you merely SIM unlocked to get on to T-Mobile, you will still need to CID unlock, so as a precaution you should do EVERYTHING in the newbies guide. Also, instead of just asking what HardSPL is, try following the links provided.
The community tends to be much more helpful when you have done your research and taken initative before asking for a direct hand out. This thread is better than average, but I thought I'd give you the heads up before flames come in from others.
Do everything here, all of it: http://forum.xda-developers.com/showthread.php?t=433835
Also note, the steps saying to remove your SIM and SD cards are very important.
Travito said:
Please re-read the Newbies threads if you need an explanation as to what HardSPL is and how to install it and then flash a ROM. If you merely SIM unlocked to get on to T-Mobile, you will still need to CID unlock, so as a precaution you should do EVERYTHING in the newbies guide. Also, instead of just asking what HardSPL is, try following the links provided.
The community tends to be much more helpful when you have done your research and taken initative before asking for a direct hand out. This thread is better than average, but I thought I'd give you the heads up before flames come in from others.
Do everything here, all of it: http://forum.xda-developers.com/showthread.php?t=433835
Also note, the steps saying to remove your SIM and SD cards are very important.
Click to expand...
Click to collapse
thank u flashed it already.......sorry for the simple question re: hard spl.
HardSPL
Follow the tutorials. Get Hard SPL. Don't cut corners, you may brick your phone. Hard SPL will allow you to flash basically worry free.
It's great that your phone is unlocked, but that doesn't mean you can't brick it. I'd try to explain in greater detail, but the sticky posts at the top of this forum should be much better at it than I am.
Please post your questions in one of the threads already created. No need to create a new thread for random new questions.