Hi,
I was trying to install the Dutty's WM 6.1 OS on my Boss's Tilt, didnt worked with the kaiser-HardSPLv1, and looked around for solution and found that i can copy "JumpSPL1.56-KAIS" and run it on the Tilt and than can install the OS, but somehow, its giving this 3 Color Screen and Serial and when i connect to USB, it shows USB instead of Serial, than when i try to install Dutty's OS, it comes up with Recovery option and doesnt finish successfully, it stays on 0% and than again goes back to Recovery option.
Please help me, will be enough if i can go back to where i was before installing anything or any way to Hard Reset and get back to the previous state before running JumpSPL1.56-KAIS.
Please reply ASAP.
Thank you,
Dhaval.
Oh For Goodness Sake........you Are Not Supposed To Use Jumpspl To Flash A Rom!!
Anyway to get back ?
Please give me solution.... please.
dhaval said:
Please give me solution.... please.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=396922
Try looking there.
Hi Southrnlake,
Thank you for your response.
I looked at a similar thread and after the white screen, i put the jumpspl on Tilt and ran it and thats how it got stuck on the 4 color screen.
My Screen Shows
KAIS1*0
SPL-1.93.0000
CPLD-8
on the right top corner the tri-color screen displays RUUNBH
and in the bottom White Screen(4th) it shows USB if its connected to USB o/w it shows Serial.
I can no longer connect to the PC using ActiveSync.
Please guide me to fix this problem.
Thanx in Advance.
Dhaval.
dhaval said:
Hi Southrnlake,
Thank you for your response.
I looked at a similar thread and after the white screen, i put the jumpspl on Tilt and ran it and thats how it bot stuck on the 3 color screen.
I can no longer connect to the PC using ActiveSync.
Please guide me to fix this problem.
Thanx in Advance.
Dhaval.
Click to expand...
Click to collapse
i have the same problem doesnt anybody know the answer
okans said:
i have the same problem doesnt anybody know the answer
Click to expand...
Click to collapse
most of us know how to answer and it has been answered many times... why don't u get off ur lazy ass and do some work by searching and reading around.
and to op rule 1: never install anything for anyone.
and secondly u have bad sector blocks which can be cleared using mtty ..again search and read.
THE SOLUTION FOR THE 10,000 TIME DEPENDS ON YOUR SPL VERSION.
FOR YOUR 1.93 SPL IT IS AS FOLLOWS:
USING MTTY ISSUE THE FOLLOWING COMMANDS:
cmd>set 16 0
cmd>task 8
FOR INFO ON USING MTTY, SEARCH & READ.
Thanx GSLEON3...
I am really very much thankful to you for showing that its possible to unbrick my Boss's Tilt.
I went thru this post and couldnt quite understood clearly as to what exactly i need to do, Please guide me what exactly i need to do as i dont want to play around anymore with my Boss's phone.
I searched and looked at this forum : http://forum.xda-developers.com/showthread.php?t=372497
I think this is the correct thread you might be mentioning to search, please correct me if i am wrong.
http://forum.xda-developers.com/showthread.php?t=371154&page=5
Please help me fix this.
Thank You,
Dhaval.
flash the damn thing with its original rom
Thanx to you All
Thank you very much all of you for your replies and keeping up the good work.
I did as GSLEON3 replied and that was it. So Easy. Very Happy.
Now, never touching or helping anybody with ROM Update.
dhaval said:
Thank you very much all of you for your replies and keeping up the good work.
I did as GSLEON3 replied and that was it. So Easy. Very Happy.
Now, never touching or helping anybody with ROM Update.
Click to expand...
Click to collapse
Well, If I would've known that I would NOT have helped you. This is a place of sharing knowledge & learning. If you're not willing to help others, well, you get the point.
GSLEON3 said:
Well, If I would've known that I would NOT have helped you. This is a place of sharing knowledge & learning. If you're not willing to help others, well, you get the point.
Click to expand...
Click to collapse
I think he meant on anyone elses phone it was his bosses phone. You know help someone out by trying to upgrade their phone and blowing it up.
-McMex
Some ppl don't understand what is the XDA comuninity about ...
Related
please while using shelltool. to upgrade wm5 to wm6 but ive just got an error message and suddenly lost my connection from activesync! please i dont know how to retrieve my phone! now after bootscreen... white screen appears and nothing happens! i tried hard reset it. nothing happens! please help!
i wish someone here could help me! please! im crying like a baby here! cant sleep! waiting for answers!
prinsipe21 said:
please while using shelltool. to upgrade wm5 to wm6 but ive just got an error message and suddenly lost my connection from activesync! please i dont know how to retrieve my phone! now after bootscreen... white screen appears and nothing happens! i tried hard reset it. nothing happens! please help!
i wish someone here could help me! please! im crying like a baby here! cant sleep! waiting for answers!
Click to expand...
Click to collapse
can you get it into bootloader (the coloured bars) ???
yes
yes sir i can!
prinsipe21 said:
yes sir i can!
Click to expand...
Click to collapse
Don't call me sir, mabe I'm younger than you
Well, then you are not the notsohappy owner of a brick
Get it into bootloader and flash your carrier's official rom
Also, see that in WM6 you must use only ActiveSync 4.5 or higher
Ask if you need help, I will be here for couple of hours and there are others who know way more than me and also can help
ill try it sir!
currently downloading .exe from htc site. dude is that an installer? do i need to flash it using other programs or not? thanks!
oh btw! i just used activesync 4.2 i am also want to upgrade my cingular 8125 to wm6 xplore1.1.. just like yours.. what steps i shall do? can u help me?
Read the wiki on how to unbrick your phone
NOTE: And don't double post
sorry sir, i just dont know what to do
anyone please help me
Get the rgb boot loader screen on by holding down camera while you reset. Then connect via usb to the pc. You will see the word " usb " appear on the bottom of the screen on your phone.
Run the exe you downloaded from your manufacturer / carriers website and it will install the stock rom.
Phone will reboot when finished.
Hey presto.
Dont panic son
Rather than just randomly flashing stuff, you need to read. Specifically:
http://forum.xda-developers.com/showthread.php?t=298613
It will step you through things and point you to the right posts to get you going. DON'T SKIP STEPS! DO Everything and check everything...
Good luck (and quit throwing "sir" around Way too formal)...
I agree
mfrazzz said:
Rather than just randomly flashing stuff, you need to read. Specifically:
http://forum.xda-developers.com/showthread.php?t=298613
It will step you through things and point you to the right posts to get you going. DON'T SKIP STEPS! DO Everything and check everything...
Good luck (and quit throwing "sir" around Way too formal)...
Click to expand...
Click to collapse
I agree what he said lol
anichillus said:
Don't call me sir, mabe I'm younger than you
Can we call you His Guru-ness instead?
Ask if you need help, I will be here for couple of hours and there are others who know way more than me and also can help
Perhaps, but you are certainly at the top end of the food chain here.
Click to expand...
Click to collapse
Anichillus--->You're funny, I edited it to be more true, less humble.
To the OP...don't panic, your wizard is not truly dead until the usb falls out and smoke comes trough all the cracks. Please do yourself a favor...READ READ READ READ READ...
READ THE WIKI, READ THE STICKIES...GET TO KNOW YOUR DEVICE COMPLETELY FIRST.
Anything you attempt, is done at your own risk...knowledge is power...understand your Wiz, be one with your Wiz.
Hello to everybody
I am having a strange problem with my kaiser vodafone, come up with white screen and does not work at all, is just possible have the tricolor screen using switch + camera keys, a this point I have tried to install new ROM, HARD SPL etc. the loading bar come up on screen but nothing happen,
I did plenty of suggestion reading around the forum but nothing is working, look like is a hardware faulty ????
So please if somebody expert on the matter can let me know something to do will be appraciate ...
thanks in advance
kissabout2002 said:
Hello to everybody
I am having a strange problem with my kaiser vodafone, come up with white screen and does not work at all, is just possible have the tricolor screen using switch + camera keys, a this point I have tried to install new ROM, HARD SPL etc. the loading bar come up on screen but nothing happen,
I did plenty of suggestion reading around the forum but nothing is working, look like is a hardware faulty ????
So please if somebody expert on the matter can let me know something to do will be appraciate ...
thanks in advance
Click to expand...
Click to collapse
please post this in the appropriate thread...like for example the HARDSPL thread. For example the one dealing with the white screen issue specifically. Try searching "hard spl white screen"
kissabout2002 said:
Hello to everybody
I am having a strange problem with my kaiser vodafone, come up with white screen and does not work at all, is just possible have the tricolor screen using switch + camera keys, a this point I have tried to install new ROM, HARD SPL etc. the loading bar come up on screen but nothing happen,
I did plenty of suggestion reading around the forum but nothing is working, look like is a hardware faulty ????
So please if somebody expert on the matter can let me know something to do will be appraciate ...
thanks in advance
Click to expand...
Click to collapse
for starters wrong thread .. secondly problem could have been completely avoided if you did the basic reading i.e. first hardspl .. if white screen than follow thread on white screen fix .. got hardspl? flash rom ... simple as that.
now u need help .. and instead of posting under the right thread you create a new redundant thread asking about a problem that quite a few people run into. in order for us to help we need info from your phone .. what does bootloader say? can u boot to operating system?
thesire said:
for starters wrong thread .. secondly problem could have been completely avoided if you did the basic reading i.e. first hardspl .. if white screen than follow thread on white screen fix .. got hardspl? flash rom ... simple as that.
now u need help .. and instead of posting under the right thread you create a new redundant thread asking about a problem that quite a few people run into. in order for us to help we need info from your phone .. what does bootloader say? can u boot to operating system?
Click to expand...
Click to collapse
sorry but I did not where put my problem, I did try to resolve it reading lots of other thread and I try lots of solution but nothing, anyway thanks for your help and time, so the problem with my kaiser is that it power up with white screen and nothing else happened then I have to take off the battery and put in again then pressing power button and camera I got the tricolor screen
http://www.ssb7.net/members/watch/image_view.php?path=http://www.ssb7.net/users/25415/&file=k3.jpg
connect to the computer running XP I try to update ROM or RADIO or SPL but the result is all the same this:
http://www.ssb7.net/members/watch/image_view.php?path=http://www.ssb7.net/users/25415/&file=k2.jpg
with the result on the computer:
http://www.ssb7.net/members/watch/image_view.php?path=http://www.ssb7.net/users/25415/&file=k1.jpg
a this point I have to take away the battery,
let me know if you need more information
thanks
Acky
You don't have hardspl installed. Install the hardspl, white screen fixed.
Follow the directions exactly. This is your freebie
http://forum.xda-developers.com/showthread.php?t=354061
P1Tater said:
You don't have hardspl installed. Install the hardspl, white screen fixed.
Follow the directions exactly. This is your freebie
http://forum.xda-developers.com/showthread.php?t=354061
Click to expand...
Click to collapse
thanks mate but how can I copy JumpSPL1.56-KAIS.exe to the device and run it if the device does not work ?
regards
Acky
well if nobody else is able to help I have to throw away this stupid expensive phone :-(
kissabout2002 said:
well if nobody else is able to help I have to throw away this stupid expensive phone :-(
Click to expand...
Click to collapse
Before you get too upset, have you tried posting in the correct thread? Just like was suggested over a week ago? Have you tried a hard reset? I don't see that anywhere in your steps you took. What about flashing a stock rom?
skatdawg said:
Before you get too upset, have you tried posting in the correct thread? Just like was suggested over a week ago? Have you tried a hard reset? I don't see that anywhere in your steps you took. What about flashing a stock rom?
Click to expand...
Click to collapse
thanks for help , I tried hard reset but then the same problem, about flash STOCK ROM how can I do that?
regards
Acky
kissabout2002 said:
thanks for help , I tried hard reset but then the same problem, about flash STOCK ROM how can I do that?
regards
Acky
Click to expand...
Click to collapse
You download the stock kaiser rom (searching is fun!), then you unrar, and click on the phone like button and follow the instructions. Then again, theres a thread on returning your phone to its original config. More searching fun!
kissabout2002 said:
well if nobody else is able to help I have to throw away this stupid expensive phone :-(
Click to expand...
Click to collapse
Don't trash, I will be happy to pay for shipping charges on it to ship it here
I cannot find UK VODAFONE STOCK ROM original 6.0, somebody knows where is possible found it?
thankssssss
Searched the forum but did not find anything, hopefully someone can help:
I upgraded from Tomal's ROM 8.2 to 8.5 and everything went fine. I got the message to do a hard reset which I did. Got the clear storage screen (press 0 to clear) but since I pressed 0 my piece is dead. Cant enter boot loaded, laptop wont recognise it either. Tried reading up on mtty tools but it requires atleast the bootloader screen. Someone please help!!
blingin said:
Searched the forum but did not find anything, hopefully someone can help:
I upgraded from Tomal's ROM 8.2 to 8.5 and everything went fine. I got the message to do a hard reset which I did. Got the clear storage screen (press 0 to clear) but since I pressed 0 my piece is dead. Cant enter boot loaded, laptop wont recognise it either. Tried reading up on mtty tools but it requires atleast the bootloader screen. Someone please help!!
Click to expand...
Click to collapse
At the risk of appearing stupid.....Is your battery flat???? do you have another one to try or tried charging it? Coz I have never heard of this one.
Jay
responderman said:
At the risk of appearing stupid.....Is your battery flat???? do you have another one to try or tried charging it? Coz I have never heard of this one.
Jay
Click to expand...
Click to collapse
took the battery out and kept it for about a day -- when I re-installed it started working -- weird...
Thanks for the suggestion (sorta) responderman!!
blingin said:
took the battery out and kept it for about a day -- when I re-installed it started working -- weird...
Thanks for the suggestion (sorta) responderman!!
Click to expand...
Click to collapse
Glad it helped
How to upgrade XDA Exec from WM 5 to WM6 or 6.1
I am really new to this. Need help on upgrading my XDA Exec, can someone tell me the steps to do it...
Many Thanks in advance
aroaratarun1984 said:
I am really new to this. Need help on upgrading my XDA Exec, can someone tell me the steps to do it...
Many Thanks in advance
Click to expand...
Click to collapse
Welcome to the forum
Please READ here: http://wiki.xda-developers.com/index.php?pagename=HTC_Universal
You´ll find all you need to upgrade to 6.1
Good luck,
I followed all of the steps to flash a new ROM into my tilt. I attempted to install a hard SPL 1.93, but it stuck me at the bootloading screen. I can't active sync because im at the screen and it wont let me. I tried the program mtty, but i cant get it to work because it wont register. it says...:
KAIS1*0
SPL-1.93.0000
CPLD-8
I know i'll probably get banned from the forums, but I'm just hoping someone can give me a quick answer. I appreciate the help.
never heard of that HardSPL, only 3 versions.
Go grab a proper HardSPL (I recommend 3.29) and see if you can flash that, but you should properly study first.
Also, please read the Flashing For Noobs section and DO NOT MAKE NEW THREADS FOR COMMON PROBLEMS
XPhamz said:
I followed all of the steps to flash a new ROM into my tilt. I attempted to install a hard SPL 1.93, but it stuck me at the bootloading screen. I can't active sync because im at the screen and it wont let me. I tried the program mtty, but i cant get it to work because it wont register. it says...:
KAIS1*0
SPL-1.93.0000
CPLD-8
I know i'll probably get banned from the forums, but I'm just hoping someone can give me a quick answer. I appreciate the help.
Click to expand...
Click to collapse
He has a white screen issue. His factory spl is 1.93.0000. Also its not hard spl 1.93.0000 its jump spl 1.93.0000
Go here:
http://forum.xda-developers.com/showthread.php?t=354061
And here
http://forum.xda-developers.com/showthread.php?t=423486&highlight=white+screen
I hope that this works.
Thanks for the responses, but I can't connect my phone to my computer due to active sync not recognizing onto my phone. I installed it and reinstalled it twice. I read everything on the Bootloading screen, but half the programs wouldn't load up. I can't upload anything to my SD card because i don't have a reader.
XPhamz said:
Thanks for the responses, but I can't connect my phone to my computer due to active sync not recognizing onto my phone. I installed it and reinstalled it twice. I read everything on the Bootloading screen, but half the programs wouldn't load up. I can't upload anything to my SD card because i don't have a reader.
Click to expand...
Click to collapse
ok try this just plug your phone up to the usb cable and flash a stock rom. Dont worry about the sync your phone wont sync to your pc when in bootloader. Only a stock rom DONT flash a custom rom. After you flash the stock rom you should be able to start over. I hope that this helps
sorry to sound like a newb but how would I go about doing that? I have it downloaded.. and I ran it on my computer? now what?
XPhamz said:
sorry to sound like a newb but how would I go about doing that? I have it downloaded.. and I ran it on my computer? now what?
Click to expand...
Click to collapse
What installing the stock rom? Yes it has to be run from your pc. I think that you need to read this thread Also
http://forum.xda-developers.com/showthread.php?t=433835
http://forum.xda-developers.com/showthread.php?t=374691
Kaiser Wiki
http://wiki.xda-developers.com/index.php?pagename=HTC_Kaiser
Vol22002 said:
What installing the stock rom? Yes it has to be run from your pc. I think that you need to read this thread Also
http://forum.xda-developers.com/showthread.php?t=433835
http://forum.xda-developers.com/showthread.php?t=374691
Kaiser Wiki
http://wiki.xda-developers.com/index.php?pagename=HTC_Kaiser
Click to expand...
Click to collapse
It worked! I really do appreciate your help! After hours of hoping I didn't brick my phone! Thank you so much.
No problem I remember what it felt like to be new at this. Good luck with your rom upgrades.
Mods please close this thread. Thanks
Hi, I am new here.this forum is very usefull in windows mobile..
I have tried one of the software posted here.. Kaiserunlocker... which is processed in 123 steps accordingly...
I had done step 1 the phone is ok
in step 2 the phone goes dark with verious colours grany screen
I dont understand how to revive from this problem.. please give some Idea..
I would be appricated.
tanks.
My HTC phone Model is -KAIS100 (AT&T)
aliarjun said:
Hi, I am new here.this forum is very usefull in windows mobile..
I have tried one of the software posted here.. Kaiserunlocker... which is processed in 123 steps accordingly...
I had done step 1 the phone is ok
in step 2 the phone goes dark with verious colours grany screen
I dont understand how to revive from this problem.. please give some Idea..
I would be appricated.
tanks.
My HTC phone Model is -KAIS100 (AT&T)
Click to expand...
Click to collapse
Can you soft reset? Can you hard reset? You need to read a lot more that what you have read. This site ( Kaiser ) has the best help thread on XDA... Olipof has one in all unlocker that you should have used.
I just tried that tool a few days ago,had the same problem while flashing the kaiser of a friend...
to get it to work I did the following:
I manually installed the 3.29Hard2 SPL from cmonex using jump spl,
then used the tool you use for the sim unlock.
I think that the problem is that that tool doesn't connect via usb when it reaches the bootloader.
thanks for the kind concerns,
But one thing I dont understand, the set is in grany screen... (startup is ok but it goes to grany screen {blank} while main windows appears)
Please tell me how to put jump spl. manually?
also hard reset is not processing. how to do it?
aliarjun said:
thanks for the kind concerns,
But one thing I dont understand, the set is in grany screen... (startup is ok but it goes to grany screen {blank} while main windows appears)
Please tell me how to put jump spl. manually?
also hard reset is not processing. how to do it?
Click to expand...
Click to collapse
rtfw
You need to read son, read like you have never read before. Then when you think you understand it your almost there. I have been reading for years and have yet to make my first rom guess it really comes down to time. Well the answers are there and yes you sometimes have to dig. But there is this handy search button at the top of the page third from the right if my memory is clear. And it now uses the google search engine to search this forum a function not here years ago. So your tools are there use them wisely young grass hopper and try not to post until you have read for some days. And please dont open another thread if you have a question such as how do i jump spl you should find the appropriate thread to post in.
thanks
nate
Duplicate thread.
Thread Closed
EDIT: Answer in this thread :http://forum.xda-developers.com/showthread.php?t=433835
Ta
Dave