Related
I installed the touchflo, it gets installed , but doesn't start etc. it needs somebody to get it working ,it doesn't seem all that far fetched like wm5 or wm6.it needs somebody from this forum to get it going . like they have done it on prophet, wizard,artemis, with some tweaking and alteration of biotouch file etc.cmon give some respect to the forgotten hero who started this transition from window mobile of being brick sized pda's to mainstream phone
Where did u download TouchFlo,cab?
it's all over, just download from these forums , it will be there in one of the wizard, trinity , prophet threads where they tried and succeeded ah somewhat , creating the touchflo work on their devices . u need to be logged in to see the link
touchflo cube
ATZatz said:
Where did u download TouchFlo,cab?
Click to expand...
Click to collapse
here it is !!!
does the touchflo worke on o2 aom life?
i got the windows mobile 6
and i heard abt this and its amazing
so is there a way to make it work on it?
i downloaded the cab file and installed it but it doesnt open
if anyone could get this to work on the magician it would be even better than WM5 or WM6
TouchFlo on Magician
I installed GoodWin and FunContact from Vito Technologies. It´s a mix from TouchFlo and iphone and works fantastic. I now returned to my Magician and will sell my Charmer with WM6, it is also good, but horribly slow.
hubie53 said:
I installed GoodWin and FunContact from Vito Technologies. It´s a mix from TouchFlo and iphone and works fantastic. I now returned to my Magician and will sell my Charmer with WM6, it is also good, but horribly slow.
Click to expand...
Click to collapse
absolutely agree that Goodwin and FunContact is worth installing on magician or wm2k for that matter...IMO Vito should upgrade Goodwin to have more interactive home screen...now its seem that you have to scroll a lot because everything is in one page...
I didin't like this Goodwin, on my Magician it "half-worked", the signal strength and battery meter doesn't work and the button slide lock too, just when I start the program it appears and then never more. But I agree that the User Experience is fantastic. I am using the 2.03 WWE modified ROM.
Goodwin etc.
It is correct that the batterymeter and the signal strength don´t work, but with the lock-button i think you make a mistake: click on it with stylus or finger, hold it and drag it from the left side to the right side of the display, and the device will be unlocked so that you can work with it. I think batterymeter isn´t as important, i took the Power-button to Favorites to reach it easily for controlling the battery status. Another effect of the "half-working" is, that the timer to controll the testing period doesn´t work, too! So, for devices with WM2003, it´s Freeware!
hubie53 said:
It is correct that the batterymeter and the signal strength don´t work, but with the lock-button i think you make a mistake: click on it with stylus or finger, hold it and drag it from the left side to the right side of the display, and the device will be unlocked so that you can work with it. I think batterymeter isn´t as important, i took the Power-button to Favorites to reach it easily for controlling the battery status. Another effect of the "half-working" is, that the timer to controll the testing period doesn´t work, too! So, for devices with WM2003, it´s Freeware!
Click to expand...
Click to collapse
Ok, it is locked just when I stard Goodwin, but how to Lock again? I was using Slide2Unlock very similar that locks the PDA everytime I Power Off the phone to stand-by mode, with Goodwin nothing happens when I power off and on.
why don't you guys try this out. just modify the includede ini file to match your shortcuts.
http://forum.xda-developers.com/showthread.php?t=358102
hi i download the fun contact and i really like it is there a place where i can download the serial?
hubie53 said:
I installed GoodWin and FunContact from Vito Technologies. It´s a mix from TouchFlo and iphone and works fantastic. I now returned to my Magician and will sell my Charmer with WM6, it is also good, but horribly slow.
Click to expand...
Click to collapse
i will buy the charmer off you?/?
hubie53 said:
I installed GoodWin and FunContact from Vito Technologies. It´s a mix from TouchFlo and iphone and works fantastic. I now returned to my Magician and will sell my Charmer with WM6, it is also good, but horribly slow.
Click to expand...
Click to collapse
Thanks for testing man. I'll install it right away on my O2 XDAII mini.
edjorge212 said:
hi i download the fun contact and i really like it is there a place where i can download the serial?
Click to expand...
Click to collapse
dude.. it's less than $20..I say just pay for it man..if u ever tried to write a program for a PPC2003 phone u'll know what a b!tch it's like...these ppl have put alotta effort into makin it work and the least we can do is show our appreciation... afterall.. this ain't TrashWare like a dodgy virus remover that installs the viruses in the "free trial" version just so u can pay them $20 to "get rid of it".. this is pure sweat and hardwork that someone's put in dude...and the lack of technical docs from M$ doesnt help either!
Otherwise.. dunno if anyone's mentioned it before, but a friend of mine intro'ed me to PointUI .. Alpha version just came out for PPC2003.. and it looks friggin schweet =) I'm usin it on my Magician.. definitely worth a look.. so far it's still free coz it's Alpha version
guys
i've successfully installed BeejiveIM_v0_1_.9.2.4 on my D2.
on another site it was written that it can be installed w/o any serial number and need of registering, activation whatsoever.
so, i select No when asked if i want to activate.
then i try to connect to my YMSG account, it shows that it tries to log in...and then i get this "empty" error you can see in the attachment.
can any1 help? do you guys got this application working on your D2s?
ok, guys, went looking for alternatives and found Nimbuzz or Mundu.
will continue with these...
beejive is goin' bye-bye.
try parlingo or shmessenger (java)
I've been using BeejiveIM on diamond 1 and topaz and I had no problem whatsoever...
I now have 0.9.2.4 installed on my Topaz with WM6.1 and it works fine!
Unfortunately BeejiveIM it's the only messenger that I found and I like for wm touchscreen devices... other are just ugly, hard to use, ...
//BTW, Activate your bejive IM with empty details and try again. (just click on activate and than ok without filling anything)
I use MUndu and it's ok until know. It not have today plugin like IM+ but it's works
Hi,
I am new on this portal but I read a lot in the last days and was very surprised of the solutions you find and also the apps you made working. Great
I know its not looking very good to ask as newbie for help but I hope you can help me... I am searching for more than a week for a solution and tried even to edit the registry but unfortunately I am not good enough to find the solution
So what do I want do to?
I have a HD2 (branding free) and I want to install Avaya One-X mobile.
Well the installation was succesfull and I also get it running inside my company and also the private modus. But since I have it installed I hear no ringtone. It always plays an "ding" and thats all.
So right now I always have to keep my eyes on my mobile to see if someone calls me or not.
And the second problem is that I also get no caller picture displayed..
But as soon as I deinstall the one-x everything is working (phone rings and caller picture is displayed)????
So you are my last hope to find a solution. Please can you help me?
If you need any further infos please let me know
Thanks
Frank
oh... the one-x mobile software is free for download on the avaya webiste
I can post you the link later (I am not allowed to post it right now...)
i'm getting mad with it...
Now I am a step further.. I now that the software deactivates the onboard call handler. I think it is only a registry setting to reenable it. after done the caller name+picture should be displayed and even the call-slider should be back.
Does someone have an idea where I can find the entry?
well now I know exactly the differents between the registry with one-x installed vs without. But I have no experiences in reading/interpreting my results.
Is a Dword something which can be used as name? or is it only a value?
Does someone has a guide for beginners please?
Did you contact Avaya support for assistance?
I have recently taken over all our telecoms at the office (avaya system)
Saw your post on One-x and been reading a little on it. Where did you get the install files from and did you get it working in the end?
I have a support contact with a company called central so I can contact them for free advice if needed
is this the version you are using?
http://support.avaya.com/css/appman...loads/P0438/5.2.x/C201012083328498084#summary
I'll take a look at what the installer does as I've not heard of it before but it's not letting me register to download it .
yep that's the software I am trying to download
Could not create an account either
I have emailed my support company and they will be sending the software to me on a disc.
thanks for your responses.
I installed the version for pocketpc WM6 (not the UC version) and yes it is working fine
But:
The problem I have is that since I have it installed it
- my mobile does not play a ringtone any more
- "slide to answer" and "show caller name+picture" is away
When I get the disc tomorrow ill post up the results.
This app will be very helpful if i get it working
As for the no ringtone issue I am not sure.
I would attach it... but i have no permissions...
@ fards: there are two versions. one for "Windows mobile 5"and the other one for "Windows mobile pocket pc" (here you can find it for WM6). the first is a UC versions. For this you need an internet connection and a uc-server running in your company. the other one is for normal mobile use. it calls via the phone connection the server and then your call is managed by the server.
support.avaya.com/css/appmanager/public/support/Downloads/P0483/C20090710162819340875658#files
you can find it here for free and you need no login
I do not see the HD2 listed as compatible device.
Did you get it working or still having problems?
How does the Avaya interface on the mobile phone look like?
Is it replacing the WM dialer completly or only while Avaya software is running in the background?
I have just installed it onto my HD2. The install hung at the end for about 20 mins. Reset device and the software has replaced my dialer. Appears to be working but im reading on how to configure the ini file now.
Tested on personal mode and call connected fine.
it replaces the dialer completly...
for the ini file you need the settings of your ACM. here you have to enter different extensions for each function...
you also has to to enter your mobile number in the ACM. Because your are identified via your number.
But can you test if you get a ringtone for incoming calls? thats my problem. I get no
Just to draw a conclusion to this This topic. This solution does not work correctly on HD2. Unless someone has managed to do this and has not shared?
sry... I was offline for a while... Does somesone find the solution?
No i gave up in the end..... bloody crap
One week ago I got my new HTC HD2 mobile. What a great thing. I got this mobile phone from my german provider Vodafone. When I try to create my one ring from my favorite mp3 song I searched the program MP3trimmer. But I can't find the programm. REading a lot of article I found out, that some of the mobiles where delivered without this nice program. Did anyone have an idea where I can get this program for my brand new HD2.
Many thanks in advance
Heiko from Germany
Hello there ..im using the one from blackstone and it works just fine
here u r :
Thanks a lot for the file.
I installed it and tried to run the program. But after starting the program I found myself on the desktop again. No chance to open the program. But maybe someone else had an idea where I can get an executable version of the mp3trimmer.
give this one a try too..it is a modified version of diamond's mp3 trimmer for VGA. (can only be installed in phone memory)
...hope it suits you..
Hi all !
I want to use a voip application in my touch2, however, it's seams this functionallity was banned by htc.
does anyone achieved to install and work with it?
I tried to follow a tutorial, but it disconnect my gps radio ...
Try nimbuzz, it supports sip too.
Yes,
It may supports, but I don't achieve to get it working on my touch2.
Is there any other alternative?
I take PortSIP, this app works well.
Look for the portsipcabwm6.cab. This one is perfect for our Touch2.
You can use with all standard SIP-Provider. I use SPARVOIP, they are very cheap (for short calls free of charge) in germany and some other countries.
There is also a checkbox and then die Main-Speaker is disabled.
So you get no "speaker-problem", that´s absolute great.
Only the contact-Button causes a problem.
It looks like a softwar shutdown, but after you quit the message it works.
I confirm PortSIP good working program. Sound is output on the headset, but not speaker.
try skype 2
I tryed skype and works well.
portsip help please.
hello everyone, this is my first time i write in a forum and i hope i am doing so in the right place. Moderator please move post if needed.
First of all hi to everyone and thank you for sharing your knowledge with me too, without knowing in the past few months you all have been very helpful to me.
I have now a little problem with portsip that is driving me insane.
I have a HTC touch 2 (t3333 / mega) and i had installed portsip for voipstunt using wifi, Everything was working fine until 2 days ago. I was able to make calls to landlines as well as to other voipstunt users.
2 days ago everything went wrong, after a full day of trying, i found out that i can now make calls to landline only for it to work fine.
When i try to call an other voipstunt user it rings normally, from the otherside they can pick the phonecall up, but my mic would be mute so they cant hear me.
i tried everything, unistall and reinstall portsip and even hard reset the htc, nothing worked, it is like portsip doesnt see the htc microfone anymore, but only when calling an othe sip user, when calling a landline everything is fine.
could somebody help me please, i feel like giving up, and also it is very frustrating as everything was working perfectly,and i was very happy with it,now i feel like getting rid of it.
thank you in advance for your help.
Gaeuk82
works great
http://forum.xda-developers.com/showthread.php?t=596682
Can I use voipcheap with PortSIP? How?
mcemeren said:
Try nimbuzz, it supports sip too.
Click to expand...
Click to collapse
I agree
nimbuz works with no problem on Touch 2 with sip feature< been making loads of calls via nimbuzz, alternativley there is a cab somehere native wm6.5 voip cab which works ok with schaps sipconfig tool but I dont recommend the wm6.5 cab as requires faffing around with dlls etc etc to get the codecs work on may sip providers etc etc. Nimbuz is very simple and works great if not you can always try fring I believe it has sip feature
rvrosa said:
Can I use voipcheap with PortSIP? How?
Click to expand...
Click to collapse
I use it with SJPhone, sjlabs.com/sjp.html and chose
SJphone CE .cab for Pocket PC 2003 v.1.60.303c, 10.26.05
Works fine and allows many other profiles and you can change between operators quickly.
fring
What about fring?
Does it work on wm 6.5?
Sorry to insist, but anyone knows if fring works on our device?
arseven said:
Sorry to insist, but anyone knows if fring works on our device?
Click to expand...
Click to collapse
yesssssss.....but Portsip is better, i suggest you to try it...
ciao
VOIP
I use a free application called Fring.
Works perfectly, easily configured and also works with ICQ etc
Where did you get skype 2 from. May i have a link plz. Ehen I tried downloading skype mobile for the HTC Touch2 windows mobile 6.5 the site said there isnt one available for the model- I have been trying for ages!!
Jatin