Hi,
I am new on this portal but I read a lot in the last days and was very surprised of the solutions you find and also the apps you made working. Great
I know its not looking very good to ask as newbie for help but I hope you can help me... I am searching for more than a week for a solution and tried even to edit the registry but unfortunately I am not good enough to find the solution
So what do I want do to?
I have a HD2 (branding free) and I want to install Avaya One-X mobile.
Well the installation was succesfull and I also get it running inside my company and also the private modus. But since I have it installed I hear no ringtone. It always plays an "ding" and thats all.
So right now I always have to keep my eyes on my mobile to see if someone calls me or not.
And the second problem is that I also get no caller picture displayed..
But as soon as I deinstall the one-x everything is working (phone rings and caller picture is displayed)????
So you are my last hope to find a solution. Please can you help me?
If you need any further infos please let me know
Thanks
Frank
oh... the one-x mobile software is free for download on the avaya webiste
I can post you the link later (I am not allowed to post it right now...)
i'm getting mad with it...
Now I am a step further.. I now that the software deactivates the onboard call handler. I think it is only a registry setting to reenable it. after done the caller name+picture should be displayed and even the call-slider should be back.
Does someone have an idea where I can find the entry?
well now I know exactly the differents between the registry with one-x installed vs without. But I have no experiences in reading/interpreting my results.
Is a Dword something which can be used as name? or is it only a value?
Does someone has a guide for beginners please?
Did you contact Avaya support for assistance?
I have recently taken over all our telecoms at the office (avaya system)
Saw your post on One-x and been reading a little on it. Where did you get the install files from and did you get it working in the end?
I have a support contact with a company called central so I can contact them for free advice if needed
is this the version you are using?
http://support.avaya.com/css/appman...loads/P0438/5.2.x/C201012083328498084#summary
I'll take a look at what the installer does as I've not heard of it before but it's not letting me register to download it .
yep that's the software I am trying to download
Could not create an account either
I have emailed my support company and they will be sending the software to me on a disc.
thanks for your responses.
I installed the version for pocketpc WM6 (not the UC version) and yes it is working fine
But:
The problem I have is that since I have it installed it
- my mobile does not play a ringtone any more
- "slide to answer" and "show caller name+picture" is away
When I get the disc tomorrow ill post up the results.
This app will be very helpful if i get it working
As for the no ringtone issue I am not sure.
I would attach it... but i have no permissions...
@ fards: there are two versions. one for "Windows mobile 5"and the other one for "Windows mobile pocket pc" (here you can find it for WM6). the first is a UC versions. For this you need an internet connection and a uc-server running in your company. the other one is for normal mobile use. it calls via the phone connection the server and then your call is managed by the server.
support.avaya.com/css/appmanager/public/support/Downloads/P0483/C20090710162819340875658#files
you can find it here for free and you need no login
I do not see the HD2 listed as compatible device.
Did you get it working or still having problems?
How does the Avaya interface on the mobile phone look like?
Is it replacing the WM dialer completly or only while Avaya software is running in the background?
I have just installed it onto my HD2. The install hung at the end for about 20 mins. Reset device and the software has replaced my dialer. Appears to be working but im reading on how to configure the ini file now.
Tested on personal mode and call connected fine.
it replaces the dialer completly...
for the ini file you need the settings of your ACM. here you have to enter different extensions for each function...
you also has to to enter your mobile number in the ACM. Because your are identified via your number.
But can you test if you get a ringtone for incoming calls? thats my problem. I get no
Just to draw a conclusion to this This topic. This solution does not work correctly on HD2. Unless someone has managed to do this and has not shared?
sry... I was offline for a while... Does somesone find the solution?
No i gave up in the end..... bloody crap
Related
Hey guys just got a x7510 from UK (live in Aus) and i haven't changed the rom (its still stock, that's because i can't find any roms for the x7510 most what ive looked at are for the previous models).
Ive tried all kinds of threads and methods and i still can't get voip working Have any of you guys made it work?...and so could you please help me? Ive installed the voipwm6.cab (so i could have internet calling) and then did this http://forum.xda-developers.com/showthread.php?t=299950 . Ive also tried using the sip tool, it still won't work over wifi. Ive also searched Google and this forum and can't find a solution.
Each time i dial ill start dialing than hang up in like 1 second (and the phone doesn't even ring (was trying my house one).
Any help would be greatly appreciated
P.s (my first HTC device )
Vico100 said:
Hey guys just got a x7510 from UK (live in Aus) and i haven't changed the rom (its still stock, that's because i can't find any roms for the x7510 most what ive looked at are for the previous models).
Ive tried all kinds of threads and methods and i still can't get voip working Have any of you guys made it work?...and so could you please help me? Ive installed the voipwm6.cab (so i could have internet calling) and then did this http://forum.xda-developers.com/showthread.php?t=299950 . Ive also tried using the sip tool, it still won't work over wifi. Ive also searched Google and this forum and can't find a solution.
Each time i dial ill start dialing than hang up in like 1 second (and the phone doesn't even ring (was trying my house one).
Any help would be greatly appreciated
P.s (my first HTC device )
Click to expand...
Click to collapse
I could'nt get that working either.
The easiest way is to use SjPhone client. The interface is a bit dated but it works. Another option is Sling, but its sound quality is atrocious, although the interface is better.
Not familiar with "sling" could you plz pass me a link? thnxs
(hey a fellow Aussie with a x7510, that's rare )
Vico100 said:
Not familiar with "sling" could you plz pass me a link? thnxs
(hey a fellow Aussie with a x7510, that's rare )
Click to expand...
Click to collapse
No, mine is a Dopod U1000. Voip should be the same on all WM6 devices.
Sorry , it is Fring, not Sling. lol, what was I thinking?
http://www.fring.com/download/
to Vico100
I have also got a Ameo 16G from T-Mobile Germany. You dont want to install an extra program, because WM6 support VOIP according to Microsoft. If you cannot find the function, just because the device producer has bloced it. I have installed a plugin for SIP setting, it was called destr0_VOIP_WM61___SIP_Config.cab, if you cannot find it, pm me your email address, I can send it to you.
jason_shg said:
I have also got a Ameo 16G from T-Mobile Germany.
. I have installed a plugin for SIP setting, it was called destr0_VOIP_WM61___SIP_Config.cab
Click to expand...
Click to collapse
Hi jason_shg
Is this .cab working for "WIFI" too, or just over GSM?
Tschii
jason_shg said:
I have also got a Ameo 16G from T-Mobile Germany. You dont want to install an extra program, because WM6 support VOIP according to Microsoft. If you cannot find the function, just because the device producer has bloced it. I have installed a plugin for SIP setting, it was called destr0_VOIP_WM61___SIP_Config.cab, if you cannot find it, pm me your email address, I can send it to you.
Click to expand...
Click to collapse
I had tried this before but it never worked for me. I think it may work for extremely limited ISP.
Are you able to make call with it and have good voice quality at both ends?
I have tested it on WIFI, it can work on my x7510. Afer installation, there is a new program named sip config tool in your programs, there you should input SIP informations, such as SIP server user name password, next step you can find a new window at the telephone setting named internet, here you can choose when to use VOIP. But I do think, the voice quality of the VOIP can not make me satisfied.
if you install Skype for PPE, it automatically does VOIP, either WiFi or 3G
I now use AGEphone mobile, which has good skin, user interface, and voice quality.
works great
http://forum.xda-developers.com/showthread.php?t=596682 . d
Hello guys. I am fairly new to this world and to this forum, so please take it easy on me.
I use a HTC P4351 Unlocked. I use it on T-Mobile network.
My First Question: The ROM version I have right now is - 4.24.422.1 WWE
Do I need to update it?? Is there a simple way of doing it??
My Second Question: Before I bought this unlocked device, I had\used T-Mobile Wing. This phone had this one app, made by "OZ Messaging". It was a client for AIM/ICQ/Y. Is there a way of getting a ROM with this app so that I can extract it from there, somehow? Or an app of this sort?? Another little problem with it is: I tried several applications like this. I need to have a connection to the internet. I don't have internet option on my phone. What I do have, is unlimited any kind of messaging. My guess is: it used my SMS gateway, since I don't have mobile net.
So to make this simple:
1. I'm wondering if I need to update my ROM?
2. Can I find a ROM, with it, or THAT separate application for my messaging needs? I would need this app to vibrate when my phone is set to vibrate mode? .
3. **VERY IMPORTANT** I don't have "Mobile Internet" on the device. I never never ever did, but that OZ Messaging client was still able to log on any three of those 3 networks. Whenever I needed to log on, in the log in process, it would to turn on my GPRS connection. I set that connection up myself. I found a way. So right now, whenever I send a Picture Message, it turns it on and sends it. I tested it out. Instead of entering a phone number, I enter my e-mail address, and it works both ways, it sends and if I reply to that message I received from my phone, it receives it back on the device. It used that "connection" for AIM/ICQ/Y before on the Wing also.
*** Basically the app needs to have a SMS gateway! ***
Is there an app that can use that kind of a connection/or is there a way for me to find this one?
Guys, please be as simple as possible. I'm not a "guru" in this field.
Thank You People. I hope I’m posting my question in the right spot, and I hope to get some help on this. Thank You once again.
use the search engine here in the forum "oz communicator" the cab is here in the forums just search for it hope this helps
livndeadgrl13 said:
use the search engine here in the forum "oz communicator" the cab is here in the forums just search for it hope this helps
Click to expand...
Click to collapse
Hey. Even if I find this *.cab file. I don't just need to find this *.cab file, but also need to figure out how to make this app to turn on the GPRS. That is what it did on my old T-Mobile MDA and on T-Mobile Wing. It used that connection to log in, and to send/receive IMs. (Via my SMS gateway)
So even if I do find this *.cab somewhere again, it won't work. AGAIN - is because I already found it once, and it didn't work, because of GPRS. Thank You
ok well i dont know what to tell you about gprs, thats something you have to find on your own along with the cab file, no one here is going to just hand you answers this forum is mostly for developers and those who want to learn how to cook roms and such, so there you have it and btw you posted in the wrong forum this is about rom dev not wing/herald cabs
livndeadgrl13 said:
ok well i dont know what to tell you about gprs, thats something you have to find on your own along with the cab file, no one here is going to just hand you answers this forum is mostly for developers and those who want to learn how to cook roms and such, so there you have it and btw you posted in the wrong forum this is about rom dev not wing/herald cabs
Click to expand...
Click to collapse
Thank You!! I hope MODERATORS will move this to the right forum. And help me out with my question, all they can!! Thank You and Thank You to the Mods of this forum.
**PLEASE MOVE THIS**
Hi Guys,
Just wanted everyone to know there is a free app called:
http://www.tellme.com/you
Its like Microsoft Voice Command.....maybe it is....maybe its whats included in the new WP7S, however its an app that works on 6.5 and its great, fast and I actually like it.
Take a look and watch the video too.
got a cab of it?
Right, It's USA only... HD2 isn't even on the list and not downloadable on that website.
So whats this post all about?
There is a cab available, it does work on the HD2, to a certain extent. It's from the Samsung Intrepid, which I believe is a non-touchscreen phone, so touchscreen doesn't work properly (and we don't have arrow keys to compensate).
The program promises a lot, but delivers poorly. The voice recognition is quite poor (on my Scottish accent anyway). It can dictate a text message, but you'll be lucky if it picks up anything you're saying correctly.
elyl said:
There is a cab available, it does work on the HD2, to a certain extent. It's from the Samsung Intrepid, which I believe is a non-touchscreen phone, so touchscreen doesn't work properly (and we don't have arrow keys to compensate).
The program promises a lot, but delivers poorly. The voice recognition is quite poor (on my Scottish accent anyway). It can dictate a text message, but you'll be lucky if it picks up anything you're saying correctly.
Click to expand...
Click to collapse
Thats true it doesnt work properly with non-american accents. I tried to search for La Tasca, it came back with a resualt of blackass.com ???????
I had to speak slow, but it did work eventually.
Out of interest, do anyof you have a cab for Microsof Voice Command ? I have the 1.6 version however it doesnt work on my HD2
vardig said:
Thats true it doesnt work properly with non-american accents. I tried to search for La Tasca, it came back with a resualt of blackass.com ???????
I had to speak slow, but it did work eventually.
Out of interest, do anyof you have a cab for Microsof Voice Command ? I have the 1.6 version however it doesnt work on my HD2
Click to expand...
Click to collapse
Make sure you use the corect MVS, i used 1.6 and it killed phone, not responsive to anything so hard reset saved me.
It actually requires MVS to work correctly but as others mentioned, its not good. Unlike the Youtube demo, it barely recognised what i say on several occasions and i spoke very cleary, slow and with no strong accent etc. Needs alot more work.
does not work at all on my hd2
i installed it and it loaded initially, then when i try to start it, it doesnt come up at all. i tried to install a new version of microsoft compact framework or whatever but then the phone will tell me i have to remove the previous version ,but then i obviously cant b ecause it does not appear in the remove programs list. this is very frustrating, can anybody help me?
Gateau Noël said:
i installed it and it loaded initially, then when i try to start it, it doesnt come up at all. i tried to install a new version of microsoft compact framework or whatever but then the phone will tell me i have to remove the previous version ,but then i obviously cant b ecause it does not appear in the remove programs list. this is very frustrating, can anybody help me?
Click to expand...
Click to collapse
Only worry about a newer version of .Net if you're actually told by an application that you need it. Also, when installing something and it tells you you need to remove the existing version, that means it's already installed. The .Net 3.5 installation will not tell you you need to uninstall .Net 2.0, so you've already got the version you tried to install. Just forget about it.
I believe it needs MSVC to work, although I'm not sure. I think I had to install MSVC.
I've never installed it since, since it was so crap - I have a very neutral accent, and even tried an American accent, but it was still pish.
i have it on my TP2......it suuuucks and my accent IS american, lol.
btw, it will put asterisks in place when you use curse words, haha, at least it recognizes them with no problem, go figure!
I tried to send a text message, it got everythin right, but the message just sat in my outbox ...
Anyone else try this??
Marty
i just noticed that 'translation', blackass.com, lol. i wonder what you would have got if you DID ask for blackass.com! :O) ahhh, technology, more fun than the proverbial barrel of monkeys at times!
better this , voice ommander or something else? just to understand the maerket now
works great on my tmobile htc hd2
Oh, I hate TellMe so much I want to scream. I've managed to successfully use it on two occasions (where it actually understands what I've said). More often than not, it simply "thinks" and "thinks" until, ultimately, saying "Sorry, didn't catch that". I don't doubt that it works great for some people, but for this thick-accented outer-Bostonian, TellMe is an exercise in futility (and definitely not an app to break out to show off the HD2's power!!).
martywix said:
I tried to send a text message, it got everythin right, but the message just sat in my outbox ...
Anyone else try this??
Marty
Click to expand...
Click to collapse
I'm having the same problem.
I downloaded the TellMe application for HD2 at mobile underground
I have installed the WMPPC_TP_TP2_HD2.cab on my device and the application runs but when I send a text message the message appears to send ok but then gets stuck in my outbox. The message stays there until I send a text the old fashion way and then all the text messages are sent out.
The instructions on the mobile underground website say to make sure you have .NET CF 3.5 version:
*TELLME*: Install NETCFv35.wm.armv4i.cab.zip first on your WM PPC, before installing the TellMe App, get it here media..fire...
Click to expand...
Click to collapse
But, I when I tried to install this I received a message saying I already had a newer version. See screen shot showing my 3.5.9198.0 version of the .NET Compact Framework. So, I'm assuming I have a newer version that should work with the TellMe but so far I have been unable to get it to send text messages properly.
Also, I'm running Voice Command v1.6.21889 , which came on the phone originally.
Has anybody else had this problem? Anybody know of a solution?
I have two T-Mobile HD2's sitting here with this installed, all work fine, except the same outbox issue on texts. I wonder what could be the issue or if there was some way to trigger the sending automatically.
I have an idea but not sure how to make it happen.
Obviously the TellMe application is only composing the message and putting it in the outbox.
So, the HTC Messaging should be able to periodically tell that a message is waiting or simply just try to send messages every now and then. After looking at the option in the Settings->Options while you are in the message application you can see that there are 4 options for Delivery: Immediate, 1 hour, 1 day, 1 week.
I wonder if there was a way to set the delivery at 1 second if it wouldn't try to send the message. This is just an idea and I'm not very experienced in customizing phones but I do some programing and could see this as a possibly.
____
The other option would be to write a small program that would check the outbox and send any messages in it. Then you could use voice command or tell me to run the program by creating a short cut the this small program and calling it "Send Messages" or something like that.
Anybody have comments or suggestions on either of these ideas?
Hi, I have been trying to get my TG01 to use the free Skype on 3UK. what I have done so far is install iskoot, changed the registry values as people say to do on forums winmo phones but I keep getting unable to connect when attempting to login to Skype. I have notices baseurl keeps changing.
I have also changed the APN to 3services, I can go onto free internet services on 3UK like ebay and planet3?
I want to get the free Skype and Windows Live Messenger to work on this, I have not tried getting Windows live messenger to work yet, been too stuck on the iskoot skype thing, it's driving me nuts.
Has anyone managed to get these free services from 3UK to work on their TG01?
Also I have found that 3UK is now selling the HTC Hero with these free services and I think you can download both Skype and Windows live messenger if you have the HTC Hero, has anyone got the installation files to share or tried installing this on another winmo phone? does anyone know what the HTC Hero user-agent is in Netfront?
Edit: just noticed the HTC Hero is on android and not Windows Mobile, but still other winmo users have managed to get their 3UK skype working through iskoot. Anyone having this same problem or know of any possible solutions? (keep getting the unable to connect message)
Any help much appreciated
8t8 said:
Hi, I have been trying to get my TG01 to use the free Skype on 3UK. what I have done so far is install iskoot, changed the registry values as people say to do on forums winmo phones but I keep getting unable to connect when attempting to login to Skype. I have notices baseurl keeps changing.
I have also changed the APN to 3services, I can go onto free internet services on 3UK like ebay and planet3?
I want to get the free Skype and Windows Live Messenger to work on this, I have not tried getting Windows live messenger to work yet, been too stuck on the iskoot skype thing, it's driving me nuts.
Has anyone managed to get these free services from 3UK to work on their TG01?
Also I have found that 3UK is now selling the HTC Hero with these free services and I think you can download both Skype and Windows live messenger if you have the HTC Hero, has anyone got the installation files to share or tried installing this on another winmo phone? does anyone know what the HTC Hero user-agent is in Netfront?
Any help much appreciated
Click to expand...
Click to collapse
What is the 3UK service? I have my skype and live working perfect. Just using wifi not the operator conetions.
bojan6 said:
What is the 3UK service? I have my skype and live working perfect. Just using wifi not the operator conetions.
Click to expand...
Click to collapse
3 uk has free skype service which routes calls through a 3's special GSM number instead of internet/3g/wifi. normal skype client routes calls using skype servers but this will cost you data charges but 3's skype routing is free as long as you are on skype. Now, iskoot makes special clients to route skype calls through 3's GSM number.
Yep I think coolkat is right.
So far I have managed to get free ebay, limited Google also a few bits a bobs 3UK gives for free like weather news clips without topup.
I really want to be able to use the free skype to skype text and calls even though I have never used skype before, I have created accounts with them just for this purpose.
I don't see why it is not allowing me, I have followed the step by step instructions people have posted on other threads but repeatedly getting unable to connect. Thinking of trying the 16th March Windows Mobile 6.5 update sometime soon to see if it will help.
8t8 said:
Yep I think coolkat is right.
So far I have managed to get free ebay, limited Google also a few bits a bobs 3UK gives for free like weather news clips without topup.
I really want to be able to use the free skype to skype text and calls even though I have never used skype before, I have created accounts with them just for this purpose.
I don't see why it is not allowing me, I have followed the step by step instructions people have posted on other threads but repeatedly getting unable to connect. Thinking of trying the 16th March Windows Mobile 6.5 update sometime soon to see if it will help.
Click to expand...
Click to collapse
Can you post where you find people posted about it? Let see I am interest to.
I use skype long time ago but never find such info how to use your operator connection and have a free skype.
bojan6 said:
Can you post where you find people posted about it? Let see I am interest to.
I use skype long time ago but never find such info how to use your operator connection and have a free skype.
Click to expand...
Click to collapse
Hi, there are many sites i visited, the link below has instrutions on changing the values on windows mobile devices.
h ttp://forum.iskoot.com/index.php?topic=1155.0 ________(remove space after "h", I'm too new to post any outside links or edit within 5 minutes )
If you visit three.co.uk you will find some infomation about it also you can order free 3 uk sim cards.
hi,
I have managed it before
follow the link carefully
install iskoot accept t&cs but dont login, exit and change registry entries as in this post
http://forum.xda-developers.com/showthread.php?t=538306
jatt
Oh yes finally managed, my bro found the solution I think from another forum. Was simply to install .net 3.5 . Thought I already had that installed, now iskoot work first time everytime.
Hello, in the past weeks WP7 Mango was ported to the Toshiba TG01 device. Now the basic functions like phone and marketplace etc are working. but there are several problems to fix, like a SMS problem:
i can't send SMS when the number is saved in
+49(178)...... or
0049(178).....
format.
when it's saved in
0178....... format, it works!.
- does anybody know, what's wrong? registry etc.? i did a "connection setup" and also deleteted the number of "sms center" field, but nothing worked.
Looks like it's a known issue. I guess you'll need to hang on.
STILL buggs:
- no camera, no sensor function
- no youtube support
- no internet radio stream support
- SMS format +49171xxxxx will not send SMS, only in 0171xxxxx format ....(+49 germany ...)
Discuss the issue here: http://forum.xda-developers.com/showthread.php?t=1431827
yes, i know, that it's well known.
I posted it intenionally here, because maybe developers for other devices had the same problem when porting WP7 to their devices. by now, unforunately nobody in our forum had an answer. now i found out, that i couldn't even save a number in the field "SMS service center".
I would have just left WM on it.
sinister1 said:
I would have just left WM on it.
Click to expand...
Click to collapse
it use it just as a toy have another wp7 device for real life. but want to get this problem solved!
DerSchorsch1 said:
yes, i know, that it's well known.
I posted it intenionally here, because maybe developers for other devices had the same problem when porting WP7 to their devices. by now, unforunately nobody in our forum had an answer. now i found out, that i couldn't even save a number in the field "SMS service center".
Click to expand...
Click to collapse
Ì can't save the number either, it just stays blank. Any solutions?
badboy70 said:
Ì can't save the number either, it just stays blank. Any solutions?
Click to expand...
Click to collapse
I have exactly the same problem. Have you managed to find a solution or a workaround? Any help is welcomed.