Database Info

Tilt not working...sitting at Windows Mobile Screen

I did the Hard-SPL and followed the instructions to a T. The phone rebooted after the hards-spl and everything worked fine. I installed BlackBerry Connect to my device and it rebooted. Now it just sits at the windows mobile screen and won't proceed any farther. Anybody have an idea why? Or what I can do to get it working again? I did the HardSPL using windows XP and not vista.
When I enter the bootload this is what I get.
KAIS*0 MFG
SPL-1.0.OliPof
CPLD-8
Serial
Please help.

Anybody have any ideas?

Go to the wiki and look up how to flash from a microSD card, then flash a clean copy of whatever rom you had put on there so you can get a fresh start. Unless something is physically broken with the phone, that will save it. Saved me plenty of times.

Just had to do a hard reset. Fixed the problem. Loaded new HTC ROM everything is up and running.

How did you do the hard reset? I can't even get it to work. (hold right & left soft keys and press/release reset until some screen I never get)

rbryant said:
How did you do the hard reset? I can't even get it to work. (hold right & left soft keys and press/release reset until some screen I never get)
Click to expand...
Click to collapse
hold the left and right soft keys while pressing the reset button simutaneously for 5 seconds.

alltheway said:
Just had to do a hard reset. Fixed the problem. Loaded new HTC ROM everything is up and running.
Click to expand...
Click to collapse
congrats, glad u fixed it.
what new htc rom

Thanks! That worked! Now to reinstall BB Connect on the device not the SD card. . .

rbryant said:
How did you do the hard reset? I can't even get it to work. (hold right & left soft keys and press/release reset until some screen I never get)
Click to expand...
Click to collapse
continue holding the left/right soft key after you put the stylus to reset, and the extra screen will show up.

can i hard reset by doing the clear storage thing?

gula187 said:
can i hard reset by doing the clear storage thing?
Click to expand...
Click to collapse
no, u have to do the left & right soft keys and reset all at the same time for 5 secs. thats the only way i know of to do a hard reset.

P1Tater said:
no, u have to do the left & right soft keys and reset all at the same time for 5 secs. thats the only way i know of to do a hard reset.
Click to expand...
Click to collapse
i held the cam.+ power button and held the reset button and its doin the same thing it does when i soft reset it

all 3 actions must be at the same time and hold for 5 secs. if you get the short vibrate, just keep trying over and over. it wont hurt anything. at least it never did to mine.

Yep, you cannot install the BB connect software to the SD card & then reset. Your device will be looking for the BB connect software before the device SD card has booted & come online.
HOWEVER,
with SK Tools you can go into the startup folder & reorder the start up files. If you move BB Connect down to the end of the start up sequence it might work. Well, it did for me. Ylu have to go in after installing though, & before the reset & change the start up sequence down so that it's the last item to auto start.
You will have this type of problem with any program you install to the SD card where the program has a higher priority auto start because as I said before, you have an item trying to boot before it's operating files are available. Therefore, you stop the whole boot sequence because it can't move on to the next start up item without finding the start item it's looking for.
AS for the Hard reset. I find the easiest way to do this is:
1. Soft Reset.
2. while the device is soft resetting depress both soft keys.
3. When you get to the first boot screen depress the soft reset key & hold while simultaneously holding the soft keys.
4. follow the instructions on the screen, i.e. push send (green phone button) to restore, etc...
Works every time for me.

P1Tater said:
all 3 actions must be at the same time and hold for 5 secs. if you get the short vibrate, just keep trying over and over. it wont hurt anything. at least it never did to mine.
Click to expand...
Click to collapse
This is not random!
When I press:
RightSoft + LeftSoft it always works.
LeftSoft + RightSoft it never works.
Sequence is important. Not sure if it is left or right first though.
If other can confirm, could someone put it in the wiki, please. I've pulled a lot of hair over this topic.

gula187 said:
i held the cam.+ power button and held the reset button and its doin the same thing it does when i soft reset it
Click to expand...
Click to collapse
that is to enter BootLoader NOT to start a Hard reset. when holding the power AND the camera button then resetting using the stlyus you should see the tri-color screen listing your SPL, Kaiser model, and one more thing i forget right now
EDIT - Make sure you are not pressing the ok button while going into BootLoader as the way the buttons are laied out its easy to press the ok by mistake.

stuck on loading splash screen

Hi, first let me say im sorry if this has already been covered somewhere, i have spent all day searching the wiki and forum to no avail. If the solution is already here please point me in the direction and delete this thread.
I have just flashed my kaiser from the original vodafone WM6 ROM to Dutty's WM6.1 Hybrid v2 5.2.19716/5.2.19700. At first everything seemed fine, then when i tried to restore the backup id created with sprite backup it restored, reset and now wont get past the loading screen. It shows the vodafone splash screen then duttys htc screen then goes back to vodafone.
I used Hardspl 3.29 before flashing. I tried hard reseting which made no difference. i cant get into the bootloader (tried the camera, power reset thing loads) and i cant connect to my pc as it wont go past the splash screen.
I had a look at MTTY but it doesnt give the options described in the instructions and after reading the warnings about MTTY decided i shouldnt mess around with what i dont understand.
Any help will be greatly apreciated, i love my phone and the idea that ive just broken it scares the crap out of me.
Thanks
Sandy

sandyfsx said:
Hi, first let me say im sorry if this has already been covered somewhere, i have spent all day searching the wiki and forum to no avail. If the solution is already here please point me in the direction and delete this thread.
I have just flashed my kaiser from the original vodafone WM6 ROM to Dutty's WM6.1 Hybrid v2 5.2.19716/5.2.19700. At first everything seemed fine, then when i tried to restore the backup id created with sprite backup it restored, reset and now wont get past the loading screen. It shows the vodafone splash screen then duttys htc screen then goes back to vodafone.
I used Hardspl 3.29 before flashing. I tried hard reseting which made no difference. i cant get into the bootloader (tried the camera, power reset thing loads) and i cant connect to my pc as it wont go past the splash screen.
I had a look at MTTY but it doesnt give the options described in the instructions and after reading the warnings about MTTY decided i shouldnt mess around with what i dont understand.
Any help will be greatly apreciated, i love my phone and the idea that ive just broken it scares the crap out of me.
Thanks
Sandy
Click to expand...
Click to collapse
first, are you SURE you can't get into bootloader?
I know it sounds stupid, but try REALLY pushing the camera button in while pushing the stylus into the reset hole. Once you get to the bootloader (tri-color screen), try flashing a different ROM
good luck

mbarvian said:
first, are you SURE you can't get into bootloader?
I know it sounds stupid, but try REALLY pushing the camera button in while pushing the stylus into the reset hole. Once you get to the bootloader (tri-color screen), try flashing a different ROM
good luck
Click to expand...
Click to collapse
I agree here a lot of people don't realize the Camera button is a two stage button. It stops at Half-Press then you can push again to get Full Press. You need a Full Press to get into bootloader.

Just to clarify.
Press and hold the camera button and at the same time insert stylus in reset hole and hold until bootloader comes up.
In other words, do not let up until bootloader shows. It should take around 2-3 seconds.

yea ive been doing that. After trying many times i have found that holding the camera button down for around 2 minutes after the htc dutty series screen comes up brings up a white screen with the error message;
"the device is unable to boot either because you have turned off the device incorrectly or tried to install an application from an untrusted source. press send to reset or any other key to cancel"
The message dissapears if i let go of the camera button, and resets back to the vodafone screen and stays there. If i press the send button same thing happens (just an idiot check but the send button is the green pick up button right?) ive tryed the enter button and both soft keys but all to the same result. I have tried holding down each button on that screen as well and the error message stays as long as i hold the button but when i let go it just goes back to the vodafone splash screen and stays there.
I have tried holding the stylus with the camera button all the way through to this error message, doesnt seem to make a difference.
just to clarify, ive done what you suggest and still cant get into the bootloader.
Thanks for any help, this is driving me mad.

hold the camera button and use the stylus to press the reset button, and continue holding the camera button until the bootloader screen pops up.
i used to let go the camera button as soon as the screen go black, but then it just reset the device instead of going into the bootloader...

oh forgot to mention. Shotly after the dutty series screen comes up i get the window appearing sound but nothing comes on screen. suggests to me that maybe its trying to tell me whatswrong but i can see what it is. maybe, i dunno..

theclueless said:
hold the camera button and use the stylus to press the reset button, and continue holding the camera button until the bootloader screen pops up.
i used to let go the camera button as soon as the screen go black, but then it just reset the device instead of going into the bootloader...
Click to expand...
Click to collapse
Im holding the camera button for around 2 minutes before it does anything, then i get the above error message.

Do you have a storage card installed?

yes. tried taking it out and doing the same thing. no different.
anything else i could try?

sandyfsx said:
Im holding the camera button for around 2 minutes before it does anything, then i get the above error message.
Click to expand...
Click to collapse
OK But are you also holding your stylus in the Reset Hole?
If yes, And you can't get into Bootloader, well I think you are "boned"

Yes im doing that. Boned? really? What about the error message that eventually comes up? isnt there anything i can do from there? Any other way of reseting it so maybe the bootloader works?
And if its really broken, do you recon my network will send me another or have i just properly voided the warranty?

Touch Pro will not Hard reset!

I started haveing issue with the device last night, the phone app was locking the phone up, i tried restoring from my sprite, but it didnt work.
I got it to a point where it workied, but for some reason it lost all my contacts and email settings.
Well I said screw it, ill just hard reset and start from scratch, after a soft reset, it hung on the "Touch Pro" screen withthe red text at the bottom, then just sits there.
If I hard boot it does the same thing.
any ideas?

go into bootloader and then flash a new ROM there.
Hold Volume down and reset. You will go to bootloader. Plug in USB and flash from there. No need to sd flash.

it will not go past the touch pro screen, still sitting like that now. I cannot even turn it off, just reset it and get back to the same spot.

did you take out the battery for a time? but you do that on your own risk... for me that doesnt sound good ...
greetz
Boris

Yep, the best I have been able to get is plugging the phone in and getting it to constantly reset itself.
BRICKED!
New ohone in the mail, hope to have it tomorrow,
Now, do I use my old sprite back up from a week or so ago, or start from scratch?
BD

best is to begin new, but for me that would take 1,5 days cause i know nothinh about UC; thats why i restore my spb backup... with differen Romeos version i had never problems ... take the rom upgrade mode...
Greetz
Boris

Once I get to the bootloader screen, how do I flash the rom?
What is the latest stock rom and what is best link to download?

I finally got to the hard reset warning screen. It says press "send" to reset. Everywhere else (including manual) it says to press "volume up". Anway, I pressed and released "send" but nothing happens. It seems frozen on teh warning screen. Or does it take a few minutes to hard reset.
PLEASE HELP!!!!!

Did you tried the method with settings => system => "Speicher löschen" ( in german; "eraze memory" or something like that in english) => input 1234??
Greetz
Boris

I sent mine back, it did nothing.

hard reset
i had to hard reset my htc touch pro as well because i unistalled a program and it wiped out like half the stock programs. this is what i did....
1). make sure you back everything up that you have on your phone.
2). shut off your phone
3). hold the volume down button and the enter button at the same time. (enter button is the big cirle center button)
4). while holding those two buttons in, press and hold the power button on the top until the popup appears on the screen. then just follow the steps and your phone should be like brand new again!!

Funny thing I did it the first time and it worked like a charm. But now i'm having trouble in doing it again?? any suggestions?? anyone???

Serious boot-problem - HTC HD2

Hi,
I got my HTC HD2 only a couple of weeks ago, and I already got a problem with it
The thing is, that I can't boot it up properly; when pressing the "Turn on/Turn off/hang up"-buttom, it boots by comin' up with the white screen with the green "HTC"-logo in the middle and some system information in the left buttom.
Afterwards the animation with "quietly brilliant" comes up and the Windows logo with the orange background comes up - and then it turns off and boots up again.
I've tried to...
* reset it (not hard reset - I have some contacts that I don't wanna loose).
* charge it up (I can, when the windows-logo appears, see, that the battery's full)
* pull out the battery for several hours
Please help - I'm very sad about that I used tons of money on a device, that now won't work.
Is there any way, where I can solve the problem without loosing all my contacts?

I did it!
Ok, found out that all my contacts were synch'ed with my gmail.
I hard-resetted it, and it works now.
Thanks for your help

Lol well done!
For people that dont have push/exchange contacts etc, always backup using myphone, spb, sprite or other software.
Cant tell you enough how important it is to back up, unless you like loosing everything right?
Greetz.

Boot problem..
Hello there,
I bought my HTC HD2 like 2 months ago, and the first two days it froze like thrice !
Now, suddenly i find it turned off then when i try to boot it up, it get stuck on the white screen with the green "htc" and information in red to the bottom left. It hangs there!
It did later show the following black screen with white text:
"The device is unable to boot because either you have turned off the device incorrectly or tired to install an application from untrusted source. Press Volume Up to reset your decice or press any other button to cancel. This operation will delete all your personal data and restore the device to it's factory settings"
but the thing is, i can't press anything at this stage, nothing happens....
I did try to hardware reset, charge, remove battery and put back, etc..

areej said:
Hello there,
I bought my HTC HD2 like 2 months ago, and the first two days it froze like thrice !
Now, suddenly i find it turned off then when i try to boot it up, it get stuck on the white screen with the green "htc" and information in red to the bottom left. It hangs there!
It did later show the following black screen with white text:
"The device is unable to boot because either you have turned off the device incorrectly or tired to install an application from untrusted source. Press Volume Up to reset your decice or press any other button to cancel. This operation will delete all your personal data and restore the device to it's factory settings"
but the thing is, i can't press anything at this stage, nothing happens....
I did try to hardware reset, charge, remove battery and put back, etc..
Click to expand...
Click to collapse
You tried:
1. With the phone turned off, press and hold the VOLUME UP and VOLUME DOWN buttons, then press the END/POWER button shortly and release it.
2. Release the VOLUME UP and VOLUME DOWN buttons.
3. Press the VOLUME UP button to perform the hard reset, or press any other button to cancel the reset.
If that dont work try flashing a new rom using mtty.
If that still doesnt work I would expect it to be a hardware problem, i would send it back to htc or if without warranty take it to a Phoneshop (or open yourself), probably a wires loose or something.

Thank you for replying... but sadly no, it didn't work
I do have warranty, ill take care of that..
Thank you again.

did hard reset and returned to factory settings. all my installed applications were lost. pity.
All I wanted is to install the @#$%% russian keyboard!

ALWAYS backup first. Simple.

I am having the same issue. Nothing has been installed as far as App's go. This is straight out of the box.
Boot Screen
R 2.10.50.26
G 15.39.50.07U
D 2.13.90963 8G
I have been able to Boot it to the home screen once. But the battery is Low and When I connect it, it locks
Things done -
Hard Reset up+down+end
up
up
Battery pull
Removed SD and SIM and turned on
None have effect
Idea's ?

I have the same issue. Phone Just out of the box I can't start it. It started once but crashed, I removed battery and is gone.
Now it remains frozen with white screen and htc logo.
I tried everything reset, hard reset, all things now is charging the battery for 4 hr. Crappy phone or software.
What to do??

ktod_16 said:
I have the same issue. Phone Just out of the box I can't start it. It started once but crashed, I removed battery and is gone.
Now it remains frozen with white screen and htc logo.
I tried everything reset, hard reset, all things now is charging the battery for 4 hr. Crappy phone or software.
What to do??
Click to expand...
Click to collapse
If its brand new out of the box, id take it back and get a different one. If its second hand, see if you can get into bootloader. If you can you can then flash a stock htc rom, if not its back to the shop.

Dark Ninja said:
You tried:
1. With the phone turned off, press and hold the VOLUME UP and VOLUME DOWN buttons, then press the END/POWER button shortly and release it.
2. Release the VOLUME UP and VOLUME DOWN buttons.
3. Press the VOLUME UP button to perform the hard reset, or press any other button to cancel the reset.
If that dont work try flashing a new rom using mtty.
If that still doesnt work I would expect it to be a hardware problem, i would send it back to htc or if without warranty take it to a Phoneshop (or open yourself), probably a wires loose or something.
Click to expand...
Click to collapse
hey can wires be the reason that hd2 cant boot up.shows green boot logo but no system information at boot and stucks there only tried every thing hard reset,custom rom,stock rom,mitty,sd method rom install..every thing...

i have the same problem But how i can Backup when phone is turned off

HTC Diamond 2 Stuck at welcome screen

Guys,
I am really in a fix. It seems my HTC Diamond 2 is stuck at the first screen (all black with HTC written in grey). I cant access my phone book and the operations are extremely slow. I have tried doing the soft restart by pressing button next to the stylus. Please help. Also as yo may have guessed I am extremely basic in my knowledge of technical stuff so please try to keep it as basic as possible. Any Kind of Help will be appreciated.

I guess you could start off with taking out your battery... But I guess you already did that?

Same Issue
Hi, I'm having the same problem described above, but worse. I have an HTC Diamond 2. It stays at the logo screen (black screen with HTC letters in white). It doesn't pass anywhere from there. I've tried using the reset button on the back near stylus, tried the hard reset (Vol Up/Down + Power key) but it doesn't respond. There's an option that "works": If I press the 'call' key + power button, it shows an update menu with the following: 1. Update Logo 2. Update OS 3. Update Eboot 4. Format User Space 5. Return; none work except for the format user space option, but it does nothing.
I've tried also from the PC but it doesn't recognize the device via USB. I downloaded Active Sync, and an update wizard from HTC.com but still no success in recognizing the device.
Please help me, I need this phone to keep working, I don't know what triggered the problem..