Hullo
If you've seen me post already it was to do with me setting up TNT5.0 on my Wizard, which I've done.
What I'm now having issues with is setting up an internet connection.
I can connect the phone to my wifi, which is all well and good but if I'm at home, I can check my email on my PC.
I've never de-branded my phone before, and there was always already preset O2 internet connections on it. So how can I set up these previously default connections on my PDA so I can download my outlook email connections via the internal modemy thing? (ie: anyone know the O2 settings, I think there are two on the phone, O2PayMonthly - my tarrif, and O2MobileWeb.)
Any clue?
Thanks
I've been through various pages, and nothing seems to have worked:
http://www.o2.co.uk/assets/O2HybridNav/Static-files/PDFs/Pocket PC manual set up instructions.pdf
http://www.itrack123.com/content/blogcategory/10/71/
http://www.filesaveas.com/gprs.html
I only seem to be able to make modem connections rather than GPRS (or is that the same) either way I can't get the web or email to download. These work connecting to my wifi.
Downloaded an o2 contract cab settings from http://forum.xda-developers.com/showthread.php?t=263609 but the file didn't seem to do anything specific to my phone
Related
Hi all, I am new here and to smart phones, did the "cc" tweak for the volume, worked great, I now have a wifi issue, i have signal, the phone see's the signal, but when i launch IE it say's "your internet comm is not config properly. Please verify your settings in data connection" I have looked at things and cannot find anything that loks wrong. I find connections but not data connections. If anyone can help.. I am deployed in Iraq and have very little access to any kind of help...Thanks-- ps..feel free to use email
It may be that internet explorer is set up to only use WAP and therefore not able to get a connection. In your IE options, make sure it says Internet or Work depending on how you set your wifi up.
Stay safe.
Is it possible to permanently affect my Wizard's internet connection by over flashing??
I'm having a problem connecting to the internet. It doesn't connect via WiFi whether on an open or WEP network (I'm testing it with 2 routers -- mine and my neighbors). It connects to GPRS just fine as long as I put the right ISP info. But when I try to load a page in IE it comes back with 1 of 2 error messages:
1)
Error 502 - Bad Request
The server could not resolve your request for uri:
2)
Cannot obtain a server-assigned IP address. Try again later or enter an IP address in Network settings.
I was running a custom made vanilla 1413 for the longest time. Then yesterday tried MFrazzz's 1913 and now ANTC's. Between one of those two I am not unable to connect to the internet. I even flashed back to the 2.24 official T-Mo ROM and even with the factory settings it still not working for either GPRS or WiFi. In the past hour I've tried T-Mob official, ANTC 2.0 and XM6R4...all the same problem.
So that virtually eliminates the possibility that it was either a bad radio, corrupted Ext ROM or a bad flash. It definately seems like my Wizard isn't being given an IP address. So that would be a software/ROM/registry problem, right? Well then why is it not working with 3 fresh ROM flashes??
Any suggestions??
If I connect it to my PC via usb/activesync and use the PC's internet connection then it will go ahead and load webpages.
As soon as I disconnect the USB cable then it'll load up the GPRS connection and try to load a webpage and timeout with one of the errors above.
One strange thing I noticed is that when it gives the 502 error it removes the domain from the uri. Example:
Target URI:
http://mobreader.com/proxy.aspx?s=http://test.com...
Response:
Error 502 - Bad Request
The server could not resolve your request for uri: /proxy.aspx?s=http%3A%2F%2Ftest%2Ecom...
seems your proxy is not functioning correctly
reflash with original rom and then this rom you would like
you can also try and delete all connections but i doubt it helps..
I'm on T-Mobile full internet plan, not T-Zones or anything, so no need to set a proxy. Just put in the access point as wap.voicestream.com and it should work.
I've input the data manually as well as tried with the t-mobile wap setting cabs. Doesn't make a difference. Also since these are freshly installed ROMs (including an official T-mobile ROM) there shouldn't be any proxy settings pre-set, right?
yes i am aware of that..
i need to explain myself more , sorry for that..
what i mean is the proxy inside the phone , not the one u setup with t-zones
or any related..
Ok a little update...
I was able to connect via Wifi this morning, it was either
A) Registry changes to HKLM>Comm>TNETWLN1>Params>HTCPreloadStatus to value of "1"
B) Registry change to HKLM>Comm>TNETWLN1>Params>HTCPreloadWifi to value of "1"
The router assigned me an IP address now and fully connected. I'm able to pull up websites now. Sometimes the above registry settings mysteriously change back to "0" value and if that happens then I won't be able to pull up a website. So I know what was causing the WiFi issues.
But still don't know what's the problem with GPRS. Still can't load a website via URL or even IP address. Is there a similiar registry edit that I can make that will restore GPRS connection ability?
Thanks in advance guys.
hi all
im new here many thanks for that amazing group here.
i have yesterday upgraded my rom of my at&t tilt (kaiser tytn ii) to the new version, well all looks ok BUT...
since then i cant get internet connection and mms messages.
i have checked it the whole day today with my network company (im in israel) and we have reconfigured the modem connections but nothing its dead.
before i have done the upgrade all was just ok since yesterday its no connection.
i have checked arround and i found that there are many users that have the same problame all around the world.
since any mms message goes thru internet (etc. gprs,edge,hsdpa) i assume that the problame is with the internet connection and that blocks the mms messages.
my cell company told me that as she sees all is ok and i remember my settings too.
also even when i connect my tilt with usb to my computer i cant go on the web bacause it says "no connection".
i assume that they have planted in the registery any value that blocks any internet connection (as gprs etc.) if its not thru the own supllier, i can understand also why but the fact is that i get hspda connection and i see the icon of "connected" but somthing blocks it !!!!!
is there a way how we can digg in and remove that block that dosent allow the internert?????
is there a way to bypass it ????
or maybe i should go back to my old ROM is that possible????
again i remind u that:
1) all worked excellent till yesterday
2) the HSDPA establishes a connection but the explorer is dead.
3) i cant even connect thru my pc with usb while my pc is fully connected via dsl to the internet.
4) all setting are same and at once its "no connection"?
5) i see that meny users have that problame
if there is any way let me know
also how bad and ugly will it be if i go back to my old ROM and how do i do it.
many thanks
tachat.....
run again the remove hidden proxy cab.
what do u mean "hidden proxy"
i never had any hidden proxy before why should i have them now??
how do i find them?
how do i remove them??
thanks
tuches
tuches said:
i never had any hidden proxy before why should i have them now??
[/b]how do i find them?[/b]
how do i remove them??
thanks
tuches
Click to expand...
Click to collapse
by searching removeHiddenProxy4CWS_1219.cab
Where did you download the rom from???
I know the one at HTC America is intended & configured for AT&T customer in North America. If a ROM was not released on your local AT&T or HTC site, that may contribute to your issues.
You may want to DL the network configuration wizard & give it a go at reconfiguring your device.
some good news
hi all
many thanks for visniak you were right.
it was some hidden silly proxy that i needed to kick out.
now the internet works great BUT i cant send MMs messages.
the configuratins are all ok (i checked it today with my network company)
they say that thats a ROM problame (means that this might be a problame because i upgraded it to ROM 1.62)
is that right???
is there a solution???
many thanks
it's like BEZEQ and BEZEQINT
each blaming the other.............
I don't use MMS.
But most likely your settings are incorrect.
Does the new AT&T ROM solve the Low Volume when using Bluetooth?
That is the only iserious issue I have with the Tilt.
I have been a Symbian user forever and the AT&T Tilt(Unlocked and using it on another service provider in India) is my first exposure to Windows mobile. I upgraded to the new AT&T Rom(1.62.502.0) and the low bluetooth volume issue is sorted out...I'm using the SE 970 stereo BT headset, which is working fine.(ADVANCE that should solve ur query)
My only issue now is that i am unable to use the Internet Explorer thru GPRS. Strangely i could configure and download my E mails thru Outlook. Also, when I Sync the Tilt with my PC, IE works fine using the net connection from the PC. Any insight/clues why I'm facing this issue?
I have my brand spankin' new TC on Rogers here in canada. Ran the auto connection wizard, great! I have Internet! But I get the cannot connect error every time i send or receive email using outlook. I have tried everything I know, is there something you can suggest? It works fine over WIFI, and ActiveSync via USB. But over the 3G there is nothing!
OK, I figured it out.
For future reference.
When your setting up the email account, do it manually as opposed to allowing the auto set up to happen. And at the outgoing mail server screen select advanced options and make sure it connects to your carrier (In my case "Rogers Internet") internet connection.
Hi - I have an XDA Wizard. It has Onebridge software installed that letys me check my work email, but to do this it needs to use a specific GPRS connection. Everything else on the phone (i.e general web access) needs a different GPRS connection. Other than manually changing from one to the other, is there any way I can automatically change conenction being used dependant upon what I am trying to do?
Cheers,
Ben