Hi - I have an XDA Wizard. It has Onebridge software installed that letys me check my work email, but to do this it needs to use a specific GPRS connection. Everything else on the phone (i.e general web access) needs a different GPRS connection. Other than manually changing from one to the other, is there any way I can automatically change conenction being used dependant upon what I am trying to do?
Cheers,
Ben
Related
Hi all, I am new here and to smart phones, did the "cc" tweak for the volume, worked great, I now have a wifi issue, i have signal, the phone see's the signal, but when i launch IE it say's "your internet comm is not config properly. Please verify your settings in data connection" I have looked at things and cannot find anything that loks wrong. I find connections but not data connections. If anyone can help.. I am deployed in Iraq and have very little access to any kind of help...Thanks-- ps..feel free to use email
It may be that internet explorer is set up to only use WAP and therefore not able to get a connection. In your IE options, make sure it says Internet or Work depending on how you set your wifi up.
Stay safe.
Hullo
If you've seen me post already it was to do with me setting up TNT5.0 on my Wizard, which I've done.
What I'm now having issues with is setting up an internet connection.
I can connect the phone to my wifi, which is all well and good but if I'm at home, I can check my email on my PC.
I've never de-branded my phone before, and there was always already preset O2 internet connections on it. So how can I set up these previously default connections on my PDA so I can download my outlook email connections via the internal modemy thing? (ie: anyone know the O2 settings, I think there are two on the phone, O2PayMonthly - my tarrif, and O2MobileWeb.)
Any clue?
Thanks
I've been through various pages, and nothing seems to have worked:
http://www.o2.co.uk/assets/O2HybridNav/Static-files/PDFs/Pocket PC manual set up instructions.pdf
http://www.itrack123.com/content/blogcategory/10/71/
http://www.filesaveas.com/gprs.html
I only seem to be able to make modem connections rather than GPRS (or is that the same) either way I can't get the web or email to download. These work connecting to my wifi.
Downloaded an o2 contract cab settings from http://forum.xda-developers.com/showthread.php?t=263609 but the file didn't seem to do anything specific to my phone
Hi,
help needed, i want to block my internet-connection via 3G...
Instructions needed...
THX
RL
Use Schaps Advanced config. It does what your looking for.
If you want to block only 3G and leave Edge/GSM, you can disable the 3g radio through certain comm managers or phone settings. If you want to leave 3g but not hsdpa you can do that through the settings in the phone. if you want to disable all data connections then there are applications to do that, search for them on the forum. or you can always not setup the network's data settings and it will never connect. Or switch the "Programs that auto connect to the Internet should use" to My Work Network or something not configured.
Hi all, for this purposes and several other settings, I recommend PocketToolman 2. Is available may be in the forum and in some freeware sites.
JM
Hi all, for this purposes and several other settings, I recommend PocketToolman 2. Is available may be in the forum and in some freeware sites.
JM
You may want to try this little application: http://www.modaco.com/content/pocket-pc-software/246171/new-free-utility-nodata/
This phone is bugging me. ill be home, where I have low/no service, ill try to connect to wifi, but the phone will try to connect to gprs/3g. then sometimes ill have service and it wont connect at all. IE will work but not opera or some other programs. WIFI is searching 24/7 telling when theres a connection. anyone else have this problem?
I want to leave wifi on but only connect to networks registered.
I want if there's no 3g connect to wifi if available.
seems simple to me. possible? maybe i need to change some settings?
There is "no data" but that don't really solve the problem.
I have expereinced the same, especialy if I have low signal then the gprs/3g connections starts up.
It would be neat with an application that gave you a pop up where you had to confirm that you want to connect thru anything other than wifi or bluetooth.
I have the nodata program on my phone and it works great. Search the forum for the program and if you cant find it tell me and I'll attach the .cab
jaszek said:
I have the nodata program on my phone and it works great. Search the forum for the program and if you cant find it tell me and I'll attach the .cab
Click to expand...
Click to collapse
whats the program do
http://letmegooglethatforyou.com/?q=nodata+pocketpc
aonavy said:
whats the program do
Click to expand...
Click to collapse
NoData is probably not what you're looking for. It will allow you to disable traffic through a selected data connection. But it must be enabled / disabled manually. Sounds like you're looking for something that will toggle automatically, giving priority / preference to your WiFi connection when it's available.
There's a program called CommMgrPro that will do what you're looking for. That is, enable and disable connections based on things like cell tower location, detection of WiFi, etc. There's also a forum page for the program here.
A program called Bandswitch (at the same site as CommMgr Pro) will do similar to NoData, except it will let you choose enable / disable based on Time of day presets.
Also here in the forum you can find a program called WifiLocations. It will do similar to the first program above above. If you search the forum there are a few more (some free) programs that will do what you're looking for. Good luck!
My problem with the nodata program is that I can't seem to disable gprs/3g traffic while using wifi. It might be that I have an old version, but I have found many times that even with nodata running in the background with disabled data traffic, it still connects me if I loose my wifi connection.
hotmail said:
NoData is probably not what you're looking for. It will allow you to disable traffic through a selected data connection. But it must be enabled / disabled manually. Sounds like you're looking for something that will toggle automatically, giving priority / preference to your WiFi connection when it's available.
There's a program called CommMgrPro that will do what you're looking for. That is, enable and disable connections based on things like cell tower location, detection of WiFi, etc. There's also a forum page for the program here.
A program called Bandswitch (at the same site as CommMgr Pro) will do similar to NoData, except it will let you choose enable / disable based on Time of day presets.
Also here in the forum you can find a program called WifiLocations. It will do similar to the first program above above. If you search the forum there are a few more (some free) programs that will do what you're looking for. Good luck!
Click to expand...
Click to collapse
thank you very much for the info. I think I sorta fixed it pretty well on my own.Still need the toggle off and on though.
I hard resetted it with out the bloat. then configured my interenet like this:
http://forums.wireless.att.com/cng/board/message?board.id=cingular&message.id=110811
then i went to sounds/notifications in settings, i think, and disabled the wifi notification.
seems to work pretty well.
i take back what i said.it goes in and out. I had 3g service and it said I was connected to media net, but it wouldnt let me get to the net. this phone is a pain when it comes to internet and gps
what do you guys have for internet settings under start>settings>connections>connections>advanced>select network
what setup do i use in the first in the first box and the which setup in the second.
mine 1st media net
2nd my work network (whatever that is)
aonavy said:
i take back what i said.it goes in and out. I had 3g service and it said I was connected to media net, but it wouldnt let me get to the net. this phone is a pain when it comes to internet and gps
Click to expand...
Click to collapse
Edit your MEdiaNet connection settings so your proxy is DISABLED. If it is enabled your WiFi will try to use it too - which is not possible. Unchecking the proxy will have have no discernible impact to your browsing speed when you are using the AT&T data connection.
aonavy said:
what do you guys have for internet settings under start>settings>connections>connections>advanced>select network
what setup do i use in the first in the first box and the which setup in the second.
mine 1st media net
2nd my work network (whatever that is)
Click to expand...
Click to collapse
You can safely set both to MEdiaNet. If you have WiFi enabled and you're connected to your access point it will take precedent over your GPRS (Edge) or UMTS (3G) connection. It is not necessary to disable the AT&T data connection if you are connected and browsing over your WiFi connection. As soon as you turn off or lose your WiFi signal, your phone will go back to using the AT&T data connection.
hotmail said:
Edit your MEdiaNet connection settings so your proxy is DISABLED. If it is enabled your WiFi will try to use it too - which is not possible. Unchecking the proxy will have have no discernible impact to your browsing speed when you are using the AT&T data connection.
You can safely set both to MEdiaNet. If you have WiFi enabled and you're connected to your access point it will take precedent over your GPRS (Edge) or UMTS (3G) connection. It is not necessary to disable the AT&T data connection if you are connected and browsing over your WiFi connection. As soon as you turn off or lose your WiFi signal, your phone will go back to using the AT&T data connection.
Click to expand...
Click to collapse
okay..thanks for the post.
set media net for both and disable proxy and I should be okay correct?
2 questions:
how do I disable the the proxy? delete wap.cingular from the settings? click disable proxy icon?
also i heard if you have one of these disable you cant use your mms?
up up up and away...
I sometimes uses the wifi connection to surf the web on my touch pro, problem is that the wifi reciver don't look to be very strong so sometimes I loose the connection, especially if I'm moving around.
I have found the program nodata, but it doesn't seem to work that well. Even if I activate nodata and have it running in the background while surfing the phone still connects to gprs/3g connection if the signal is lost. My guess is that if I click a link after I loose the wifi connection the phone seem to override the funtion of nodata. Is there any other software that I can use instead?
I want the phone to wait until a wifi connection is established again instead of changing to a 3g/gprs connection.
I'm not sure. Once I removed all the data connection settings, but then I couldn't use the data ever. I've been keeping an eye for a program that does this, but it seems that everyone under the sun other than me has a data plan.
hahaha yo are noy allone out there, I would alslo like to know how to disable data conection.
the answer - modaco nodata. Its not the neatest but the only one
EDIT: and also you can do this in Advanced Configuration Tool from "connections" menu item. If you want a more permament solution (because of the long way to the choise in the app)
All the apps I mention are really easy to google for
darfri said:
the answer - modaco nodata. Its not the neatest but the only one
Click to expand...
Click to collapse
yes...nodata is the one you want.....just search and you shall find
Not sure if this helps but when I handed down my Hermes to my Father in Law just so he could use it for phone calls and TomTom (via BT GPS). I had AT&T block all data so he can only use wifi.
It works great! when his wifi is turned off and he tried to go to the web it says connection refused.
Thanks for the input guys, but nodata don't seem to help me. It's the software I use now, but it seems that somethign is able to override the nodata software leading the phone to dial up when the wifi connection gets a low signal.
I'll give the Advanced Configuration Tool a go, but it seems to be a lot of work going in there turning things off, just to go back and activate them again if I want to check my mail "in the field".
I have an at&t Fuze with no data plan, just unlimited text/mms. I cannot disable data by using Modaco's NoData because mms requires Media Net.
What I have done so that all apps use WiFi is the follows:
Under Start / Settings, select the Connections tab.
Launch Connections.
Select Advanced tab.
Click on Select Networks.
Under Network Management, change "Programs that automatically connect to the Internet should connect using:" to "My Work Network".
With this setting, I don't have Internet connection unless WiFi is active, which is what I want. Maybe the Touch Pro has something similar.
Thanks icwinner, that seem to have made the trick.