Reset the STL? - Tilt, TyTN II, MDA Vario III Windows Mobile ROM De

Hi,
I've modified the ROM on my Kaiser by using the tools here. I now need to send it back to HTC as it's holding charge for about 1 hour. They've told me that if I've modified the ROM they will charge me for the repair even though it's obviously the battery and not the ROM that's faulty. According to their support guys, if the "STL is modified" it will be chargeable.
Basically, my question is, how do I reset the STL back to the factory setting? Can I do this with a factory reset?

Sorry for the dump question ... what you mean with STL??

Maybe they said SPL and not STL?

evalu8t0r said:
Maybe they said SPL and not STL?
Click to expand...
Click to collapse
I think you right.
Read the Sticky on Warranty Returns and flashing the orginal SPL.
Ta
Dave

Erm...Dunno? I was quoting the guys at HTC. I kind of hoped that somebody here would know what the STL was

Ah, OK. I did seach the forum before posting, but as I'd heard STL my search found bugger all!! Thanks Guys.

Sorry guys, I'vesearched all over for the sticky referred to above. CAn somebody point me to it please?

"Reverting back to the AT&T or HTC ROM and SPL for Warranty or return
Updated - NOW IDIOT FRIENDLY"
http://forum.xda-developers.com/showthread.php?t=335568

Related

[HELP!]My G3 Prophet accidently got a G4 SPL.

It can start in bootloader and the usb connection is still alive. Can I, somehow, bring it back to life?
i give you 80€ i need a bricked device to develope JTAG interface! after that i can give the community a solution to reflash a bricked device like yours! if my way works ... you can sell it back if you want for the same price.
Alexander aka dc said:
It can start in bootloader and the usb connection is still alive. Can I, somehow, bring it back to life?
Click to expand...
Click to collapse
you people never will learn to read before doing something you don't understand.no downgrade ot spl possible,your device is bricked.
Some people should think first... and, maybe, post second...
I've learned thet JAFWM software could help me get my Prophet back to life... I'll give it a try and will post results...
Alexander aka dc said:
I've learned thet JAFWM software could help me get my Prophet back to life... I'll give it a try and will post results...
Click to expand...
Click to collapse
the jafwm software will only restore your imei nothing else (unless they have updated their software) the only way to fix the problem is to use the jtag OR goldcard trick i've been working on.
Well, I got my Prophet back from service. As I can see they have changed DOC. Now I have a G4 Prophet...

Reverting to original SPL with microSD ?

Hi.
Last night I flashed TNT on my TynTN II, and this morning, no more USB. Doesn't charge either.
Not too sure what happened here, sounds more like a hardware problem. The mini USB connector looks fine though.
So time for a warranty repair. I've reverted to the original RUU using my microSD, that was easy.
However, I haven't found a way to revert to the original SPL (I have HardSPL installed obviously).
When I follow the usual route to flash from the SD card, it shows that it's flashing the bootloader, yet when I go back into the bootloader, it is still the Olipro version.
Is there a way to revert to the original SPL/bootloader with just a microSD ?
Looked here, but couldn't find that answer, so Im creating a new thread.
Thanks
Jean-Yves
ive read on multiple threads about this issue and the general opinion is that it is not possible.
Bugger....
They will probably deny repairing my unit under warranty then..
jyavenard;2148613 said:
Bugger....
They will probably deny repairing my unit under warranty then..
Click to expand...
Click to collapse
As long as the original rom is on it they more then likely will accept it.
i think there could be a way to get original SPL area with microSD
jyavenard said:
Bugger....
They will probably deny repairing my unit under warranty then..
Click to expand...
Click to collapse
You need to really brick it .... so it doesn't pwr up.
No power, no bootloader, no visual proof of flashing.
After several users flashed the radio from hell, warranty return was the only answer before the fix came out....they got replacements.
don't worry about it. My buddy's Tilt had the same issue with the USB. I just took the latest official ROM and tossed it on my MicroSD card and flashed it that way. They took it no problem.
-Mc
Yes you can. PM me or I'll try to remember to reply when I have time. Prob. should PM me though.

[SOLVED] Going back to Original ROM

Hi guys,
nice work from JockyW, ookba and everyone doing the job to bring us excellent software (pls if i forgot anyone, don't be mad ). I really appreciated the RUU_MAPL_3VOLUTION_WM65_3VO.2.50.112509 for a long time but I will sell my Maple now. It time to move on and try something new. Thats why I need to go back to the Official HTC ROM. I just cannot get it to work...
Obviously just flashing the original HTC Rom won't do the job because of the Hardspl, but how do i get around this. I just need some help on going back.
Thanks in advance, UKFencer
160 hits and nobody got an idea...? Or is the answer too simple?
If i am missing something pls point me to it.
Thanks,
UKFencer
Sorry, I don't think I have any idea. I *think just flashing the original ROM should work, I have upgrade/downgraded other phones with factory/custom roms with no problem. I have a question on top of yours. If I don't Hard SPL, what do I lose? There's a thread about downgrading the HardSpl to 1.19 or 18, I don't know if that helps. I would like an answer to my AT&T question as well. Sorry about hijacking your topic but I at least bumped it.
Download original rom in HTC website. Thats all.
Or you could use goldcard model to flash back to original WWE ROM
alinkwok said:
Or you could use goldcard model to flash back to original WWE ROM
Click to expand...
Click to collapse
where can i get that?
Sorry, for not replying any earlier, but was finishing my finally year project...took longer than i thought...anyway now i back to re-install the original firmware...
@Sonnguyen
doesn't work because of HardSPL...tried it.
@alinkwok
yeah, i've read about it...without a seccond mobile, i'll have to buy the software if i recall correctly.
So, any other tips where to look for howtos...?
UKFencer
Have you ever imagined looking into Wiki
If I were your Maple buyer I would apreciate more to have it upgraded to a cooked ROM, rather to have ugly stock.
You can go back and install any ROM you want
orb3000 said:
Have you ever imagined looking into Wiki
If I were your Maple buyer I would apreciate more to have it upgraded to a cooked ROM, rather to have ugly stock.
You can go back and install any ROM you want
Click to expand...
Click to collapse
Yes, I agree with your sentiments regarding the ROM, point is however that once the custom ROM is flashed with the Hardspl, the original ROM cannot be flashed back, which is sometimes required, especially if something happens to the phone and it has to be returned for repairs etc to the retailers.
Strange, it´s the 1st time I know that an HTC device can´t go back to original ROM...
I´ll do some research...
The original SPL is included in the package you downloaded from here..... Just have to use it, flash original rom, and you are on your way....
How exactly do I flash the original spl nbh file? I tried replacing the hard spl nbh with the original and running RUU but the spl remained the same.
you need to get the one from here: http://forum.xda-developers.com/showthread.php?t=558003
there is a folder marked original spl in there. it is the same process you did when you put the hard spl on there, just using the original nbh

How to get my TP flashing again

Hi everyone,
So I updated the stock SPL back to my phone while having a CDMA rom on my device. Looks not like a problem at all, but appearantly it is when your phone is not a CDMA rom After that the phone won't boot anymore.
Since then I am not able to update my device to ANY rom, not even the stock rom. The updater keeps giving me the famous 262 error and hangs at 0% of the update. XDA-user orfeo_b has messaged me a while ago that he had a task29 program for windows 7 to format my phone. But he didn't respond to my message. So my question is: is there anybody who has this program for my phone? and if not, is there any other possibility to empty/format my phone?
Why did you create two threads in the same forum? (THREAD LINK)
You not want to post HERE, did you even bother to do any searching in HERE
You do know the FUZE is GSM, correct?
R^7Z said:
Why did you create two threads in the same forum? (THREAD LINK)
You not want to post HERE, did you even bother to do any searching in HERE
You do know the FUZE is GSM, correct?
Click to expand...
Click to collapse
sorry, a second after saving I realised that my topic was a question so I posted the topic again accidentally.. I searched the whole forum for weeks but didn't find any solution. As I said, I accidentally flashed a CDMA rom to my GSM phone.
User benjamminzIS started the thread HERE
Perhaps give that a once or twice over and see if it works for you. Be sure to leave some feed back if it does!
Additionally, I must confess that I skimmed your post because you posted twice and didn't think anything of it after the fact. So I apologize if I came off slightly rude. Was not my intent!
There's a pretty good chance your phone is dead now. Flashing the stock spl after bricking your phone with a cdma rom is probably the worst thing you could have done. What were you thinking? With the stock spl, you can't flash task 29, or anything, for that matter. I guess you can try flashing hard spl, but you have to keep in mind that this 'stock spl' is not in fact the real stock spl (it's a patched stock spl that is capable of over-writing the hard spl). I'm not sure if it can be over-written with hard spl; I guess you'll find out. If you had read any of the posts on reverting to stock for warranty purposes, you would have seen that the absolute last step is flashing the 'stock spl', because once you do that, the device is locked.
Now, if you also flashed a cdma 'stock spl', then you can definitely throw the phone away.

How to unbrick HTC Sensation ??????????

First of all thanks for this great forum !!!!
This will be my first post. I have to thank all developers to get the sensation s-off.
I made a stupid mistake with the eng hboot. I played a little round and typed
"fastboot oem fdisk erase_emmc.
Now Phone is completly dead and bricked. Can not power on and no charging.
But it must be possible to bring the sensation back to life. I downloades QPST an drivers and see, that the device is in download mode.
I tried cdma workshop and DFS CDMA Tool too.
Can somebody make a dump with QPST and backuo the nv file and firmware image to unbrick the sensation.
Please no commands why I have done this. I said it before. I have no second sensation to try it by myself.
Has anyone an idea ??? (without to send it back or jtag flash)
Thank you for any help.
Kindly regards Woody01
Sorry for bad English
Send me the commands and i do it for you!
No comment on what you have done
I'm sorry man, but we can't help you. Once you erase something like that, it's over for that device. If i'm reading correctly, the internal sd card is completely wiped, no recovery, no HBOOT, no / (original mount point). The thing that bothers me, if you didn't know what it did, why would you run that command? That is idiocy at it's finest. The only thing you could do is send it back for a warranty replacement, since it's bricked like that, they won't able to tell you ever rooted or flashed anything. If you do send it back, play dumb, say you woke up one day after charging it all night and it just wouldn't turn on any longer. Once you get your replacement, do not install the ENG HBOOT, it isn't for noobs for this exact reason.
Download mode could be a mode where it wait for flash ... keep it off until someone comes with ideas....
Thank you for your answers but I expectet such replies.
It must be possible to bring it back. In QPST you have the ability to flash back the Multi-Image file. But i am missing the the phon image hex and boot hex. I think if someone make a backup from the Multi-Backup and NV file we could unbrick it.
For the Galaxy S someone wrote at tool (One click unbrick). There will be everything restored. (partition, boot, etc).
Is someone interestet to help me trying this ????
Kindly regard Woody01
I say again tell me how i do it .... backing up should be no problem for a device
@xtcislove
First of all you must dwonload QPST (I found it by google). I have version 2.7 buil 355.
You need the QHSUSB Drivers. I found the drivers on google. I think the phone must be in diag mode. Use QPST Software download. There is an option backup. There you can backup the firmware. It will be restored as an qcn file.
To restore the NV File you can try DFS CDMA Tool. There is an option to read the NV file. At that point I could write the file from Wildfire. I could delete it too. I used the free version 3.2.0.0
For Diag mode you need the HTC Diag driver.
It is possible for me to upload these files here in forum and is it allowed ???.
Thank you
Be careful with the NV file. There is your imei and serial number. It would be nice if someone send the file with edited imei and serial.
I need the hex files for QPST. Some wrote in the www something about CDMA-Workshop to get the hex dump.
Kindly regards Woody01
Sry i cant edit my imei etc out ...
and with 3 posts i dont trust you really ... sry i think u should ifnd someone
@ xtcislove
I understand you and is absolutly O.K . I would not send the NV file with my emei and serial too. (only the file with editet imei and serial)
I hope someone is interestet and crazy to unbrick the device and help me.
Kindly regards Woody01
Get a warranty replacement and don't even S-Off your phone. You obviously can't handle it.
In curious, why were you doing what you were doing?
Sent from my HTC Sensation Z710e using XDA Premium App
WorldWide60 said:
In curious, why were you doing what you were doing?
Click to expand...
Click to collapse
Haha i was wondering the exact same thing
I have similar situation. my phone won't boot, no LED anywhere.
what i stupidly did was, i tried to reinstall the stock ROM and between shuffling the screens around i skipped one step. that step was actually opening the stock ROM and running it and following the commands. so i tried to unroot and S-on without selecting a ROM to flash...... now i'm screwed.
i checked my SD card in my old phone and all the data is still there. will that make a difference. or am i helpless?
massasshadows said:
I have similar situation. my phone won't boot, no LED anywhere.
what i stupidly did was, i tried to reinstall the stock ROM and between shuffling the screens around i skipped one step. that step was actually opening the stock ROM and running it and following the commands. so i tried to unroot and S-on without selecting a ROM to flash...... now i'm screwed.
i checked my SD card in my old phone and all the data is still there. will that make a difference. or am i helpless?
Click to expand...
Click to collapse
I have my sensation bricked...it's dead with screen black...someone has a solution? Thanks to anyone
Bricked mine too (Yes, very stupid indeed)
aramis73 said:
I have my sensation bricked...it's dead with screen black...someone has a solution? Thanks to anyone
Click to expand...
Click to collapse
I was stupid enough to brick mine too by an S-OFF -> S-ON transition . No solution I guess? I e-mailed three different repair centers, but no response yet. I wonder if it is possible at all to flash the Sensation's bootloader without a functional USB connection.
For other phones it can be done by a JTAG interface, but this is very delicate job which I can't do myself.
For now I consider it bricked. I bought some Apple stocks (AEX ING Sprinters Long, Dutch stock market) and will let these pay (I'm already there after today) for the new Sensation that I bought already. If it is repairable after all I will sell one of them again. I'm not going for a warranty return. Beside the fact that it is possibly detectable that I voided the warranty by touching the bootloader, it is my own mistake that I have to pay for....
By the way I have been looking for more people who killed their HTC Sensation, but I could only find you two guys and a german who is mentioned in this thread as well.
Please keep in touch!
choas2009 said:
I was stupid enough to brick mine too by an S-OFF -> S-ON transition . No solution I guess? I e-mailed three different repair centers, but no response yet. I wonder if it is possible at all to flash the Sensation's bootloader without a functional USB connection.
For other phones it can be done by a JTAG interface, but this is very delicate job which I can't do myself.
For now I consider it bricked. I bought some Apple stocks (AEX ING Sprinters Long, Dutch stock market) and will let these pay (I'm already there after today) for the new Sensation that I bought already. If it is repairable after all I will sell one of them again. I'm not going for a warranty return. Beside the fact that it is possibly detectable that I voided the warranty by touching the bootloader, it is my own mistake that I have to pay for....
By the way I have been looking for more people who killed their HTC Sensation, but I could only find you two guys and a german who is mentioned in this thread as well.
Please keep in touch!
Click to expand...
Click to collapse
I'm actually doing the whole return process. Since mine is so badly inoperable, I'm hoping that after they inspect it they will be able to give me a new one. I was able to S-On the phone (as far as i know) during the process so if they are able to read it, it should be cool. If anything i'll either be turned down or have to pay for a new one.
Planning on blaming it on the over night charging + the 2.3.4 update they released the day i bricked it haha. It's all just a game of chance.
i did it too my friend , some mistake S-off ---> s=on transition , do you have any solutions
Hello everyone, I'm a noob and this my first post. I had been reading blogs for years now on all sort of advice and solutions, so yes this is my first reply or post on any blogs. I usually find the answer I'm looking for so posting anything was unnecessary. Now I really need help. I screwed up some how. I was attempting to turn S back to ON because my device was not taking the new update, and by doing so bricked my phone (wont power on. I'm guessing I had restored a rom and not original back up which xl VipeR lx had warned about in his instructions. I have SD with su-2.3.6.3-efgh-signed.zip on it. Can someone please help I really should had not rooted my phone because I dont have the knowledge. I can take instructions very well (was Soldier in the U.S Army for 8 years (2 years in Iraq). So if some one would please give me instruction on how to fix this, I would really appreciate it.
Is there any solution ?
Thanks !
Would this tool allow me to make a backup of my phone that can be restored if ever it is bricked? In other words, would it make my phone nearly unbrickable? I mean, there is very little chance of my phone being bricked, I make sure I know exactly what command does before I execute it. I realised I have spent most of my days in the last couple of weeks reading XDA and thinking about my soon to be gf in Hong Kong XD. I just worry that when flashing a firmware file I may be left with a brick, or even get one of those bricks people speak of that just happens randomly. I really don't want to lose my phone, it means so much to me lol. I just get so worried with these things....
What I'm trying to ask is, a partition backup created with this tool can be flashed to the phone with what functioning partitions? ie do you need a working radio partition or not? working hboot? Cause what I'm scared most about is flashing a bad radio and creating a phone that can not get into hboot... i'm also scared about getting a random brick which at the moment seems to be unfixable.
Mind you, it would make a pretty impressive paperweight....
EDIT: found this guide... can someone explain what NV items are? A small understanding of this may allow me to make a backup using this tool that could then be used to unbrick sensations... I couldn't find what NV items are... I also found this....

Categories

Resources