Hi.
Last night I flashed TNT on my TynTN II, and this morning, no more USB. Doesn't charge either.
Not too sure what happened here, sounds more like a hardware problem. The mini USB connector looks fine though.
So time for a warranty repair. I've reverted to the original RUU using my microSD, that was easy.
However, I haven't found a way to revert to the original SPL (I have HardSPL installed obviously).
When I follow the usual route to flash from the SD card, it shows that it's flashing the bootloader, yet when I go back into the bootloader, it is still the Olipro version.
Is there a way to revert to the original SPL/bootloader with just a microSD ?
Looked here, but couldn't find that answer, so Im creating a new thread.
Thanks
Jean-Yves
ive read on multiple threads about this issue and the general opinion is that it is not possible.
Bugger....
They will probably deny repairing my unit under warranty then..
jyavenard;2148613 said:
Bugger....
They will probably deny repairing my unit under warranty then..
Click to expand...
Click to collapse
As long as the original rom is on it they more then likely will accept it.
i think there could be a way to get original SPL area with microSD
jyavenard said:
Bugger....
They will probably deny repairing my unit under warranty then..
Click to expand...
Click to collapse
You need to really brick it .... so it doesn't pwr up.
No power, no bootloader, no visual proof of flashing.
After several users flashed the radio from hell, warranty return was the only answer before the fix came out....they got replacements.
don't worry about it. My buddy's Tilt had the same issue with the USB. I just took the latest official ROM and tossed it on my MicroSD card and flashed it that way. They took it no problem.
-Mc
Yes you can. PM me or I'll try to remember to reply when I have time. Prob. should PM me though.
Related
After flashing from sd card with a german big Storage rom and a soft reset, the phone doesn't switch on anymore.
I can't go into the bootload either.
What can i do now to bring back my rom bachup?
thanks!
When you can't go into bootloader you've probably killed it. Pls try once more & connect it with usb or ac to charge.
You need to be in bootloader to rescue it, a shipped-rom works best in this situation.
Still got warrenty, use it claiming it's cause by regular TMO update.
Cheers, M
the phone, doesn't react at all.. so if i can't get into the bootload, i will have to change it?
Is there any other possibility to reactivate it, or to boot the broken rom?
The bootloader is the most important part of the rom, so when even that's part is corrupt I see no repair possibilities other than chip swapping.
You'll have to send it back. Try out the warrenty issue, when the rom is this much damaged I can hardly belief that a service engineer can see what caused it.
Hope the best for you, M
You don't know someone in your neighborhood with a magician too? Or Live close to Arnheim. So you can try another battery, it might be empty & not charging.
No, the battary is fine, i've just got a new one on friday form Warrenty-Service, because of a broken speaker, so i'll send it away again..
I've read about some others that had same problems with that rom, and surprisingly there were people, where that rom is working well, i just don't belive that, because i did erverything right and it should've worked...
now i'm worried weather i should try it again with an other rom when i recive a new phone, or leave it as it is! :lol:
P.S: Thank you very much for your help!!!
Is the Bootloader a part of the rom, or is it an independent prog. on the phone?
The bootloader is a special part of the rom. Pls visit the wiki for complete explanation http://wiki.xda-developers.com/index.php?pagename=HTC_Magician
There's a bootloader section & a section about BS from a shipped-rom which is in my opinion the safest way to achieve BIG Storage.
Hope they fix your magician soon.
Cheers, M
Well I guess I bricked mine ulness someone knows something I don't. I was doing a flash, running nothing else and XP did a memory dump and blue screen of death while 8125 was 54% done. Guess I have a paperweight now.
I am sure I'll get flamed for my post but thank God the Cingular ROM doesn't need an actual Active Sync connection. As long as you are in RBG bootloader screen and the USB comes on when you plug into the PPC, the factory ROM can repair the unit.
Possible Reviving Techniques For (appeared to be) bricked Wizard
See the following link and read, read, read.
http://wiki.xda-developers.com/index.php?pagename=HTC_Wizard
Very good I do remember reading that post from when I first joined here, guess I just panicked. I must mention however that none of the WM6 ROMS i have would flash only the stock one would.
When you have a bad flash you ALWAYS should go back to an official rom. This will guarentee that you get back to a complete IPL/SPL and Extended ROM. If a flash goes bad, any (and all of them) could be corrupted and flashing a custom rom won't help (since most all of the custom roms don't include any of those pieces).
n3rxs said:
Well I guess I bricked mine ulness someone knows something I don't. I was doing a flash, running nothing else and XP did a memory dump and blue screen of death while 8125 was 54% done. Guess I have a paperweight now.
Click to expand...
Click to collapse
Reboot your pc....
Your device should be in bootloader mode still
Connect and flash the same ROM....it should pick up right where it left off
If this doesn't work, flash your factory rom
As long as your device powers up....it's not bricked
The same thing happened to me once on my wife's laptop
Yeah this was on my company laptop. I was flashing Faria's RealThing for the 1 hundredth time.
hey Guyz. I have a Tilt that a customer gave me that got bricked while trying to flash one of dutty's roms...Problem is that the genius didn't load up Hard SPL even tho he told me that he did...now He wants me to fix it...even tho he didn't follow my instructions and read the WiKi...I kno that on the Hermes it was able to be unbricked. Is the same for the Kaiser possible? I would greatly appreciate your help as my customers are loving the work you guyz do here in nyc..
Thanks in Advance!
Cristian
What is the current status of the phone?
Can you get into the bootloader at all?
If you can get to the bootloader you should be able to load the AT&T AKU v0.4.4 ROM (the unoffical upgraded AT&T ROM). Once you get that loaded you should flash HardSPL immediately.
Let me know how it goes...
Cheers.
I bricked my tilt when it was less than 24 hours old... I recovered it with a BETA of the ATT rom and THEN redoing the hardspl thingy - worked a treat.
Do a search for tolt bricked and you should find afew threads for it.
The rom is called something like RUU_Kaiser_ATT_WWE....._Internal.exe
It goes to the Tri-Color Screen but stays there..I'll go ahead and research it so I can find the original AT&T and load it up...It shows a lot..workin for at&t and being a member on xda...U guyz have no idea how ya make life easier for my tilt customers b/c at&t truly dropped the ball on the rom...and by offering alternatives..u make the user experience so much better...thanks!
HTCFAN0923 said:
It goes to the Tri-Color Screen but stays there..I'll go ahead and research it so I can find the original AT&T and load it up...It shows a lot..workin for at&t and being a member on xda...U guyz have no idea how ya make life easier for my tilt customers b/c at&t truly dropped the ball on the rom...and by offering alternatives..u make the user experience so much better...thanks!
Click to expand...
Click to collapse
If you are at the bootloader screen (Tri-Color) then the phone is not bricked. In the sticky at the top on how to revert back for warranty replacement, it has links for the various roms. Just flash an official AT&T rom on it and you should be good to go. Then do the HardSPL.
Cool that you work for AT&T and hang out here! If you have any other warranty returns, I can give you my address as I wouldn't mind having a backup or two...
BTW: The AT&T ROM for the Tilt is actually quite good in the big picture of things. At least the phone is usable (slower than it should be and less memory than it should have, but its still very usable and stable on the official rom). If you want to ***** about official roms, go back to the 8125 and its official rom. The while the device (at the time) was great, that rom made the phone almost worthless (super slow, battery problems, bad radio, dropped calls, freezing, etc). I can't tell you how many people that run custom roms on the Wizard just can't believe what that phone is actually capable of.
Ok, sorry, got off topic there...
does Hard-SPL needs to be flashed just once on a device or does it need to be installed every tome a new ROM is going to be Flashed onto it?
mfrazzz said:
If you are at the bootloader screen (Tri-Color) then the phone is not bricked. In the sticky at the top on how to revert back for warranty replacement, it has links for the various roms. Just flash an official AT&T rom on it and you should be good to go. Then do the HardSPL.
Cool that you work for AT&T and hang out here! If you have any other warranty returns, I can give you my address as I wouldn't mind having a backup or two...
Click to expand...
Click to collapse
For some reason, it's not being recognized by my Activesync. I got it to recognize it but now it sayz Error 294: Invalid Vendor ID...I'm using the RUU_Cingular_WWE Rom for the Kaiser...so I'm flabbergasted at this point...
Quick Silver said:
does Hard-SPL needs to be flashed just once on a device or does it need to be installed every tome a new ROM is going to be Flashed onto it?
Click to expand...
Click to collapse
Only once! Than you can flash as much as you like!
HTCFAN0923 said:
For some reason, it's not being recognized by my Activesync. I got it to recognize it but now it sayz Error 294: Invalid Vendor ID...I'm using the RUU_Cingular_WWE Rom for the Kaiser...so I'm flabbergasted at this point...
Click to expand...
Click to collapse
ActiveSync will not recognize your device when in BootLoader mode!
The Vendor ID error means the ROM cannot be loaded on the Tilt without HardSPL. You need an original Tilt ROM. (That's what I think about this)
HTCFAN0923 said:
It goes to the Tri-Color Screen but stays there..I'll go ahead and research it so I can find the original AT&T and load it up...It shows a lot..workin for at&t and being a member on xda...U guyz have no idea how ya make life easier for my tilt customers b/c at&t truly dropped the ball on the rom...and by offering alternatives..u make the user experience so much better...thanks!
Click to expand...
Click to collapse
Oddly enough the "Original" Tilt ROM will not install on a Tilt that does not already have HardSPL on it (to spell it out for you, the CID of the ROM does not match the Tilt's stock SPL). If you check the "reverting back" sticky you'll find all this info already, though it is deep in the thread.
The AKU v.0.4.4 ATT Beta ROM does have the correct CID and will flash on a stock Tilt. SO that is what you are forced to resort to at this point. Once you get the beta ROM installed you can (and probably should) install HardSPL.
After all that, if you decide you want to return or warranty the phone follow the "revert" thread to restore it to "stock" form.
Some additional notes on your problem...
ActiveSync will not connect in Bootloader mode (this is expected). You should see a device show up in Device Manager however, I can't recall the exact description however.
quick flash procedure:
put phone in bootloader
connect usb cable
install ROM
FYI, the problem may not be a bricked tilt... you could try Pof's fix which involves using MTTY.exe to boot the phone, depending on how your "customer" tried to flash it it may just need a kick in the pants to restore it. (search Pof's SSPL for the Kaiser thread for instructions, the thread was closed so you will have to look deep).
<climbing on my soapbox>
Lastly... your use of the word "customer" concerns me... are you charging people for the work you do to their phones? If so, do you donate to the people who make it possible? I'm probably just misunderstanding you, but if you're profiting from others work, perhaps you should contribute (especially if you're coming here to ask for help).
</climbing down>
Good Luck!
Cheers.
Customers as in I work for an AT&T corporate owned Retail location and they have bought Tilts from me. They kno my Tilt has been modded and they usually want to do the same. I don't charge them for doing mods to their Tilts. This still remains a community where we help each other and I cherish that. Greed has no place here.
as far as ur suggestions...It looks like I'm gonna be drunk @ 4am on XDA tonite...lol...
HTCFAN0923 said:
Customers as in I work for an AT&T corporate owned Retail location and they have bought Tilts from me. They kno my Tilt has been modded and they usually want to do the same. I don't charge them for doing mods to their Tilts. This still remains a community where we help each other and I cherish that. Greed has no place here.
Click to expand...
Click to collapse
That's cool... my misunderstanding then. Hopefully no hard feelings .
All in all it sounds like the guy wants a custom ROM so you should probably get the ATT Beta ROM and install that. And then install HardSPL.
Check Kyphur's second post in the thread below for the ROM you want.
http://forum.xda-developers.com/showthread.php?t=343198
Thanks for the info sycho...I'll get to it after work..
Good news! The AKU 0.33 worked! Thanks for ur help sycho!
how can i re-install the window? at tilt 8925
i have wm6.1
i want to reset it so the error message shud gone like Recover ?
@kaal,
It seems what you want to do is a HARD RESET. Please visit Kaiser Wiki and read through. You'll know your phone better that way.
@HTCFan & Sirsycho, Glad you both sort it out in the community spirit Cheers!
sirsycho said:
Oddly enough the "Original" Tilt ROM will not install on a Tilt that does not already have HardSPL on it (to spell it out for you, the CID of the ROM does not match the Tilt's stock SPL). If you check the "reverting back" sticky you'll find all this info already, though it is deep in the thread.
The AKU v.0.4.4 ATT Beta ROM does have the correct CID and will flash on a stock Tilt. SO that is what you are forced to resort to at this point. Once you get the beta ROM installed you can (and probably should) install HardSPL.
After all that, if you decide you want to return or warranty the phone follow the "revert" thread to restore it to "stock" form.
Some additional notes on your problem...
ActiveSync will not connect in Bootloader mode (this is expected). You should see a device show up in Device Manager however, I can't recall the exact description however.
quick flash procedure:
put phone in bootloader
connect usb cable
install ROM
FYI, the problem may not be a bricked tilt... you could try Pof's fix which involves using MTTY.exe to boot the phone, depending on how your "customer" tried to flash it it may just need a kick in the pants to restore it. (search Pof's SSPL for the Kaiser thread for instructions, the thread was closed so you will have to look deep).
<climbing on my soapbox>
Lastly... your use of the word "customer" concerns me... are you charging people for the work you do to their phones? If so, do you donate to the people who make it possible? I'm probably just misunderstanding you, but if you're profiting from others work, perhaps you should contribute (especially if you're coming here to ask for help).
</climbing down>
Good Luck!
Cheers.
Click to expand...
Click to collapse
Because of you folks and this thread, I have a working device as opposed to a paperweight...Thanks!!!
I plan on rooting my phone in the next couple of days, but I was wondering if the HardSPL that you install during the "How To Root your G1" tutorial will cause any issues if I want to go back to the "official" g1 firmware from Tmobile. From reading about SPL, the stock SPL is from HTC but the HardSPL thats on the tutorial is modified. Would I replace the modified SPL if I want to go back to the official firmware?
If you look real hard, you can find a sticky about this!
But I'll be nice and sweet tonight, so here it is!
http://www.google.com/support/forum/p/Google+Mobile/thread?tid=3e938d02f4c16b82&hl=en
vdl68 said:
If you look real hard, you can find a sticky about this!
But I'll be nice and sweet tonight, so here it is!
http://www.google.com/support/forum/p/Google+Mobile/thread?tid=3e938d02f4c16b82&hl=en
Click to expand...
Click to collapse
Did you post in the wrong thread? That link is about rc33 OTA update. My question is about getting back to official firmware after rooting the phone and whether the HardSPL can stay or revert back to the original.
androidmonkey said:
Did you post in the wrong thread? That link is about rc33 OTA update. My question is about getting back to official firmware after rooting the phone and whether the HardSPL can stay or revert back to the original.
Click to expand...
Click to collapse
here: http://forum.xda-developers.com/showthread.php?t=455860
to go back to original everything just use the original spl in an update.zip and then use the DREAIMG.nbh from when you rooted your phone and you will have stock stuff like it just came out of the box
tubaking182 said:
here: http://forum.xda-developers.com/showthread.php?t=455860
to go back to original everything just use the original spl in an update.zip and then use the DREAIMG.nbh from when you rooted your phone and you will have stock stuff like it just came out of the box
Click to expand...
Click to collapse
So if I want to go back I would first install the rc29 then the original SPL, then upgrade to rc33?
Whats the purpose of using the HardSPL vs the original SPL?
no, do the original SPL THEN the .nbh you need to have root to flash an update.zip that is not signed with the proper keys, as for the benefits of hard SPL over the original go here and read
http://forum.xda-developers.com/showthread.php?t=455860
i took a look at all your posts and EVERYTHING you have said on the boards so far has been a question that is easily answered if you read. good luck on this phone i give you a week before i see a thread saying you bricked it
tubaking182 said:
i took a look at all your posts and EVERYTHING you have said on the boards so far has been a question that is easily answered if you read. good luck on this phone i give you a week before i see a thread saying you bricked it
Click to expand...
Click to collapse
Thanks. Some of the FAQs are not very clear. I'm not sure what you mean by EVERYTHING I've said on the board...
btw, are you hoping I brick my phone? So far I've read 4 different tutorials on how to root your phone. Each one has something different than the other. I'm just trying to get the facts straight before rooting my phone.
look for the thread "app that roots your phone" tell him in a PM that you want to beta test it, when i ran it or him on the last version he needed to fix the telnet script and he is pretty sure he got that working. i would give the link but since it is not my app it is not my place to give out the link.
i do not hope you brick your phone, but i see it as an inevitable thing, i know what i'm doing, i'm no guru but certainly not a n00b and i have managed to "brick" my phone just bout every day because i am always trying new things. the main thing to remember is that as long as when you turn your phone in you get the SPL or recovery then you do not have a true brick. i wish you the best in all your hacking but be forewarned that everything you try has the potential to render the phone unusable for a few hours till you figure out how to fix it. ALWAYS keep the DREAIMG.nbh on your sdcard and an update.zip that contains one of the many JF builds and you will never be too far from fixing your phone.
tubaking182 said:
i do not hope you brick your phone, but i see it as an inevitable thing, i know what i'm doing, i'm no guru but certainly not a n00b and i have managed to "brick" my phone just bout every day because i am always trying new things.
Click to expand...
Click to collapse
I understand. Hopefully I wont brick the phone but the nice thing about GSM phones is that I can jut pop my SIM card into my old phone if any issues come up with the G1. I just see people being mean to noobs when at some point in time they were noobs also.
The main reason I want to root the phone is to move the cache to my SD card. The onboard memory on the G1 is a joke. I knew the limitations when I bought the phone in October, but I thought for sure they would have come out with a update that lets you run apps from your SD card. Being a early adopter is fun
if you have less than a class 6 sdcard then moving the cache will have loads of lag, took 3 seconds to delete an email on my class 4. but if you just wanna move apps then you'll be fine
tubaking182 said:
if you have less than a class 6 sdcard then moving the cache will have loads of lag, took 3 seconds to delete an email on my class 4. but if you just wanna move apps then you'll be fine
Click to expand...
Click to collapse
Interesting. I may have to buy a microSDHC card since the microSD card that came with the phone has no rating on it. After reading about SDHC, it seems only SDHC has the 2,4,6 rating.
use the RC29 NBH, it flashes everything including bootloader, then use the official signed RC33 update (40mb) and you will be back to stock rc33
korndub said:
use the RC29 NBH, it flashes everything including bootloader, then use the official signed RC33 update (40mb) and you will be back to stock rc33
Click to expand...
Click to collapse
Thanks korndub
androidmonkey said:
I understand. Hopefully I wont brick the phone but the nice thing about GSM phones is that I can jut pop my SIM card into my old phone if any issues come up with the G1. I just see people being mean to noobs when at some point in time they were noobs also.
The main reason I want to root the phone is to move the cache to my SD card. The onboard memory on the G1 is a joke. I knew the limitations when I bought the phone in October, but I thought for sure they would have come out with a update that lets you run apps from your SD card. Being a early adopter is fun
Click to expand...
Click to collapse
i was a noob before i found xda.. but in the short time i have been here i have learned sooo much.. i love this site and my rooted/themed G1!
Welcome!
I am in deep trouble here and could really use some help please. My ATT Fuze is not being detected by any PC and i have tried everything from different wires to changing everything on the fuze it self. Now my only option is to exchange it but i don't have the original OS because i am using NRGs Rom and hard SPL it about 4 months ago. Now to my question, is there anyway i can revert it to stock ROM and SPL with micro sdhc card? I need some steps please because i cant find a way to do it. Would i have to change the OS and the SPL to return if there is anyway please let me know.
darkreborn said:
I am in deep trouble here and could really use some help please. My ATT Fuze is not being detected by any PC and i have tried everything from different wires to changing everything on the fuze it self. Now my only option is to exchange it but i don't have the original OS because i am using NRGs Rom and hard SPL it about 4 months ago. Now to my question, is there anyway i can revert it to stock ROM and SPL with micro sdhc card? I need some steps please because i cant find a way to do it. Would i have to change the OS and the SPL to return if there is anyway please let me know.
Click to expand...
Click to collapse
First, what OS are you running on your PC.
Second, have you disabled/Enabled "enable faster data" in Settings/Connections/USB to PC?
Third, Have you deleted the partnership and tried to reestablish it?
Doesn't seem to be a warranty issue.
Fuze Reply
First of all thanks for your reply.
I have tried it on 4 different computer but unfortunately same result on vista and XP, on my phone i am using NRG july version rom.
I have disabled and enabled faster data in but doesn't seem to matter.
I tried everything, i reinstalled windows mobile device but doesn't seem to matter. When i ended the partnership it wasnt being detected after it or before it.
Cant i exchange it because its a faulty phone? Also can u please tell me if i can revert it to att stock rom and spl with a micro sdcard because i am going to buy a card reader. I really don't want to toss this phone and waste all that money please help!
darkreborn said:
First of all thanks for your reply.
I have tried it on 4 different computer but unfortunately same result on vista and XP, on my phone i am using NRG july version rom.
I have disabled and enabled faster data in but doesn't seem to matter.
I tried everything, i reinstalled windows mobile device but doesn't seem to matter. When i ended the partnership it wasnt being detected after it or before it.
Cant i exchange it because its a faulty phone? Also can u please tell me if i can revert it to att stock rom and spl with a micro sdcard because i am going to buy a card reader. I really don't want to toss this phone and waste all that money please help!
Click to expand...
Click to collapse
Yes, you can revert via SD card.
Do Radio and ROM first, then do stock SPL last.
Rename each RAPHIMG.NBH (one at a time) on a FAT32 formated card 2gb or smaller.
Go into bootloader mode and it should flash from there.
I would test your USB connection after you flash back to stock ROM before you flash the stock SPL to see if it may have fixed your issue.
Huh
Thanks a lot man!
Now the hard part , why do u say a card 2gb or smaller?
So i can revort the SPL with a micro sdhc card also? can u tell me where i can find this stuff, i am really sorry for the trouble and would really appreciate it if you can tell me step by step because i am a noob
Hopefully ATT exchange it for the usb issues , gotta check with them after this. Thanks
darkreborn said:
Thanks a lot man!
Now the hard part , why do u say a card 2gb or smaller?
So i can revort the SPL with a micro sdhc card also? can u tell me where i can find this stuff, i am really sorry for the trouble and would really appreciate it if you can tell me step by step because i am a noob
Hopefully ATT exchange it for the usb issues , gotta check with them after this. Thanks
Click to expand...
Click to collapse
I've heard that anything over 2 gb will cause an issue but I have done it from an 8gb card.
Start here for issues encountered.
Basically once you find your ROM Radio and SPL, extract the files so you can see the .NBH files for each.
1. Take the ROM file and rename it "RAPHIMG.nbh " without quotes.
2. Place it in the root of your storage card and enter bootloader mode (Volume Down + Reset), the phone will read the image file and begin to load it.
Do this for each file but wait until the first file has loaded.
Radio.nbh will be renamed to RAPHIMG.nbh
SPL.nbh will be renamed RAPHIMG.nbh
As one is done loading, remove it from starage card and put the next one on and repeat step 2.
Another thread regarding SPL.
I hope this helps you and sorry I don't have the time to walk you through it.
Just read first then you'll know what to expect.
Bruce Inman said:
I've heard that anything over 2 gb will cause an issue but I have done it from an 8gb card.
Click to expand...
Click to collapse
my best guess is just in case the bootloader doesn't have drivers for SDHC cards... my x51v has drivers for SDHC in WM, but flashing requires SD cards because the bootloader doesn't read SDHC
revert SPL or no?
Hey thanks bruce!
One more question, should i revert the SPL even tho i changed the radio and os. When i go to ROM version it says 1.95 but is that the SPL? Also you think ATT will take the phone back with the phone not syncing reason or do i have to make up some other stuff up? O btw the 8gb kingston card worked fine for reverting it and it still doesnt detect the phone
darkreborn said:
Hey thanks bruce!
One more question, should i revert the SPL even tho i changed the radio and os. When i go to ROM version it says 1.95 but is that the SPL? Also you think ATT will take the phone back with the phone not syncing reason or do i have to make up some other stuff up? O btw the 8gb kingston card worked fine for reverting it and it still doesnt detect the phone
Click to expand...
Click to collapse
To be safe I would revert the SPL as well.
The 1.95 is the ROM build base.
You want to revert back to stock SPL 1.90.
I can't second guess what AT&T will cover or not but you may want to "further your cause"....
Best of luck!!!
in my experience (my UK t-mob vario is back at repair right now) - DONT revert the SPL if you cant do it from the USB.
Obvisously you have a different setup to me, but when i tried to revert my phone to stock for exactly the same fault (no usb sync, regardless of pc or cable / phone rom, state etc etc) i managed to get the phone to refuse to boot due to a spl / rom difference. As i couldnt load from usb - i couldnt flash anything new, and as i had managed to overwrite hard spl - i couldnt flash what i wanted from the SD card! (if i could get the usb to work, i could fix it all - but as that was the problem i had to send it off fubar)
For some reason (god knows why!) it appears that t-mob are repairing my phone under warrenty despite the spl error but i wouldnt advise getting yourself in the same situation, as i was 100% expecting it to come straight back to me!
My personal advice is send it off with the correct rom, radio & splash screens (and remove security unlock if required) so the phone looks stock - the only difference will be the spl version. They probably wont notice!
1.90 or 1.95
Thx for the info guys, my new phone is coming and it took me about 2 to finally on its way. About the SPL, mine says 1.90 and that was when i first did the hard spl to change roms. What is the stock SPL 1.90 or 1.95? at loading it hows me 1.90 olinex i think...also i can change it if needed with my 8gb sdhc card or no?
I had a problem with my PC not detecting my fuze a few weeks ago. I found out it was my new firewall blocking the connection. I disabled the firewall and it worked like normal.
If it were me i would try to connect again after you flash the stock rom. If there was something wrong with the usb it still wont work. If it connects to activesync the maybe it was your ROM, or something else.
Just a suggestion