HardSPL issue with 8125 G4 and 2.21.olip - 8125, K-JAM, P4300, MDA Vario ROM Development

I've been trying to find a thread that addresses my issue but have'nt been able to find anything addressing my issue.
I wanted to upgrade my 8125 G4 (IPL/SPL 2.25.0001) to WM6 so I tried the guide for "newbies".
I have windows XP and Activesync 4.45. I was able to establish a connection with my 8125. I ran the HardSPL and it confirmed my device is G4 and it went to the utility.
I followed the utility and was able to reconnect and reestablish connection with activesync. after rebooting my phone the IPL is 2.21.0001 but the SPL is still 2.25.0001. Can you tell me why it did'nt change to
2.21.olip?
I then tried rerunning HardSPL but when the utility asked me to reconnect and establish connection with activesync activesync does not discover the phone. Otherwise am able to use my phone just fine and can even activesync with my laptop.
I did not continue to other steps for fear of bricking my phone since the guide says not to continue if SPL isn't 2.21.olip.
Can anyone please help me get back on my way to WM6?
my phone is:
Rom 2.25.11.1 wwE
radio 02.25.11
Protocol 4.1.13.12
ExtRom 2.25.11.102

brent39902 said:
I've been trying to find a thread that addresses my issue but have'nt been able to find anything addressing my issue.
I wanted to upgrade my 8125 G4 (IPL/SPL 2.25.0001) to WM6 so I tried the guide for "newbies".
I have windows XP and Activesync 4.45. I was able to establish a connection with my 8125. I ran the HardSPL and it confirmed my device is G4 and it went to the utility.
I followed the utility and was able to reconnect and reestablish connection with activesync. after rebooting my phone the IPL is 2.21.0001 but the SPL is still 2.25.0001. Can you tell me why it did'nt change to
2.21.olip?
I then tried rerunning HardSPL but when the utility asked me to reconnect and establish connection with activesync activesync does not discover the phone. Otherwise am able to use my phone just fine and can even activesync with my laptop.
I did not continue to other steps for fear of bricking my phone since the guide says not to continue if SPL isn't 2.21.olip.
Can anyone please help me get back on my way to WM6?
my phone is:
Rom 2.25.11.1 wwE
radio 02.25.11
Protocol 4.1.13.12
ExtRom 2.25.11.102
Click to expand...
Click to collapse
Multi Posting !
Instead of starting a new thread practically in every forum is not going to get you help immediately and is not advisable,its always better and more beneficial if you post in the appropriate forum and thread related to the subject and problem.There are better chances of getting help sooner and by reading that particular thread might help you to solve your problem as many may had this problem and got it solved.

Thanks for the tip.
I particularly don't like redundancy, but since the other forums also deal with similar topics I thought multiposting would be ok.
Do you recommend one particular forum?
I thought the upgrades forum would be ok, but since I have a G4, well...you know.

Related

[ASK] Upgrade to WM6..Help me...!!!

Hi all I'm still newbie in this forum.
I have a MDA Vario T-Mobile I bought it from my friend (2nd hand), now its used a iMate ROM. I don't know which ROM that he used to upgrade the PDA.
I want to ask can I upgrade my MDA to WM6? When I resest my MDA it displayed:
IPL 1.01
SPL 1.06
GSM 01.01.10
OS 1.1.9.3
What should I prepared to upgrade my MDA to WM6? Thanks before.
Regards
Dari mana?
From the looks of your IPL and SPL, seems to be a G3... so not a problem...
from wiki
A G3 Wizard will have the following
IPL: 1.xx or 2.xx or 2.xx.00x (Note that this version only has TWO 0's.).
SPL: 1.xx or 2.xx or 2.xx.00x (Note that this version only has TWO 0's.)
A G4 Wizard will have the following
IPL: 2.xx.000x (Note that this version has THREE 0's.)
SPL: 2.xx.000x (Note that this version has THREE 0's.)
@new2city
Dari Bali-Indonesia.
So what (file) should I prepared to upgarde my ROM to WM6?
Oh I forget I have another problem. Why my MDA when sync with my PC sometimes disconnect by itself, now it's more worst I can't sync my MDA to my PC. I used Active Sync 4.0 Windows 2000 SP4.
HELP....SOS....
macam ni, susah sikit.. (dari Malaysia)
I don't know but after reading so many brick units, maybe it is better you do a hard reset and see if it solves your Active Sync connection problems before attempting an upgrade..
My MDA now can connect.
@new2city
If I want to upgrade to WM6 what should I prepared? How I can know my MDA wa CID unlocked? I read on Faria WM6 thread we must have 2xxx bootloader version. I don't know how we can know our bootloader version? And the last question I want to know how to hard reset my MDA?
Thanks
http://forum.xda-developers.com/showthread.php?t=298613
If I want to used faria ROM I read it must be 1.xx version. When I read in http://forum.xda-developers.com/showthread.php?t=298613 we must update to T-Mobile 2.26. What should I choose still in 1.xx ot upgrade to 2.26?
kumis_merah said:
If I want to used faria ROM I read it must be 1.xx version. When I read in http://forum.xda-developers.com/showthread.php?t=298613 we must update to T-Mobile 2.26. What should I choose still in 1.xx ot upgrade to 2.26?
Click to expand...
Click to collapse
you have to upgrade using that 2.26 rom!!! If you dont BEWARE the Devil will come for you
Ya you have to or you could just brick your phone! You have to have IPL/SPL above 2.00. The rom 2.26 as above will give you IPL/SPL 2.26.
And before you try to flash make sure you have read all you can, cus it does not always go right first time and you need to know what to do if you have a problem.
If you start flashing and it reset. Dont think it is dead try below
Hold the button voice button and press the reset button, when it sorts its self out you should have a screen with 3 colors. Connect your USB and flash away but use a non cooked rom. Flash T-mobile 2.26 again
I once had to re-flash my phone 6 times before I was happy! Then found out that i could have sored the problem by using a reg key!! LOL oh well!
I have already SPL 1.06 and IPL 1.01 can I directly unlock my MDA using lokiwiz? No need to downgrade to button ROM.
Thanks to the answer this forum rocks....
kumis_merah said:
I have already SPL 1.06 and IPL 1.01 can I directly unlock my MDA using lokiwiz? No need to downgrade to button ROM.
Thanks to the answer this forum rocks....
Click to expand...
Click to collapse
If you are still on IPL/SPL 1.XX
you should be able to unlock it with the lokiwiz software.
enjoy
Thanks guys now I'm on Faria ROM real thing but I'm still confused about my MDA why everytime I want to sync I must replace the USB cable more than two times to get syncronize with my PC. Some times it disconnect by it self, than I must reconnect again. Anyone know what happen to my MDA?

Anyone can help me though msn

Hello
Are there anyone who can help me Flashing my Wizard to a touch?
Pm me for my msn
My cid is locked
http://forum.xda-developers.com/showthread.php?t=298613
as self explanatory as can be
Thats not my problem..
Okay, here it is:
My cousin has a S200 and i have a wizard, i went to him and he said "Oh yea, of course i know how", so we used a program i think Sspl and to the left there was a picture of his prophet and we pressed "upgrade" so my problem is now that i have a strange rom on my phone, and belive me, its VERY slow and when i want to see battery status it says "Unknown" and it doesnt recharge i think (No orange light). My phone is CID locked, so i want to unlock it, but when connecting to a computer it doesnt connect proberly. Fx. in Wizard service Tool i can "Enab. Rapi + Unsigned Apps" but i cant Read Cid, it says my device isnt connected. (Wish i could before) so i need help down grading to my old software and unlocking and finally, flash it to a touch...
Soz bad english
NB! Its G4 - This is my first Windows mobile flashing, but i am an expert on flashing Sony ericssons
Versions:
IPL 2.18.0001
SPL 2.18.0001
GSM 03.02.11
OS 2.20.7.34
Oh yea thanks guys..
Figured it out myself
Now running with BD

G4 Help plz

Hi,
Im have a G4 mda vario!
ipl 2.21.0001
spl 2.21.0001
original software t-mobile.
Im trying to figure out the best way to upgrade to wm6. Some topics say to unlock CID but with a G4 you must pay for it. Other topic say use hard spl or soft spl is this also for CID unlocking?? I dont know annymore so can someone help me?? The steps I need to make to install wm6 on my device.
And for the best wm6 rom on htc wizard aka mda vario.
Thnx!
Kevin
i have tmobile mda vario
i am running tnt 1933 which seems to be for me at least the best all round rom. and its as stable if not more than stock wm5
i used soft spl.
you should read the instructions fully and make sure you are happy before proceding.
I recommend.
1) Hard reset
2) hook up to pc and run wizard service tool (search the forum) and use this to enable rapi and cert etc.
then run the soft spl.
I had problems first couple of times where it would go black then i get funny error in green text but never actually flashed anything. But i think the hard reset and enable rapi stuff fixed that.
hope thats of some use.
cant recommend tnt rom enough
if you want to save yourself an absolute tonne of mucking about and trying to figure everything out, i recommend you splash the cash and pay the £20 on http://www.imei-check.co.uk/
i have a g4 and used these guys, worked with absolute no issues, and im on the xmr5 rom ( or whatever its called )
funy said:
i have tmobile mda vario
i am running tnt 1933 which seems to be for me at least the best all round rom. and its as stable if not more than stock wm5
i used soft spl.
you should read the instructions fully and make sure you are happy before proceding.
I recommend.
1) Hard reset
2) hook up to pc and run wizard service tool (search the forum) and use this to enable rapi and cert etc.
then run the soft spl.
I had problems first couple of times where it would go black then i get funny error in green text but never actually flashed anything. But i think the hard reset and enable rapi stuff fixed that.
hope thats of some use.
cant recommend tnt rom enough
Click to expand...
Click to collapse
the above recomendation are good , in fact that's what i have done to update my G4. I would only add to that rembember to save your current rom and extended rom before update. so you may downgrade if you have any problem with wm6.

Device Dead Please Help Someone.

Hi mates. i was using tnt series wm6 rom. and i just tried to upgrade to faria's rom using shell tool. and after non successful upgrading now. when i start my wizard it stuck on boot screen. with this info.
ipl : 3.08
spl: 3.08
Gsm : 2.19.11
OS : 2.18.0.0
i tried a alot installing original t-mobile shipped rom but it says the update utility is not for your device.
i tried a lot installing other roms using shell tool. but all return this screen. so please let me know. how i will completly flash this thing..
Kind Regards
Tell us smth more
Are you using Windows Vista on your PC.
If you do, do some search around to find how to update from Vista in Bootloader Mode, as Vista can not talk to the phone on that state
Aldo
thanks bro., i am using wondows xp. and i tried all shipped original t-mobile roms. and all i got this message" the update utility is not for your device" i think this error is due to i upgraded my ipl and spl to 3.08. before i have 2.26
i also tested with wizard service tool. and its also not detecting the device in boot loader mode.
so please let me know. what i will do. and which rom i will try to fix that issue.
ruk_design said:
thanks bro., i am using wondows xp. and i tried all shipped original t-mobile roms. and all i got this message" the update utility is not for your device" i think this error is due to i upgraded my ipl and spl to 3.08. before i have 2.26
i also tested with wizard service tool. and its also not detecting the device in boot loader mode.
so please let me know. what i will do. and which rom i will try to fix that issue.
Click to expand...
Click to collapse
My friend have you already done the reviving techniques included in this tut?:
http://forum.xda-developers.com/showthread.php?t=298613
G3 or G4 device?

htc wizard cingular 8125 unlocked need help please

Hi I love this site. I need some help i did plently reading on roms n flashes and tried plenty out. My Question is that i have an htc 8125 phone which is unlocked and has windows mobile 5 on it and is is ilp 1.05 spl 3.08. I wanna put windows mobile 6 with the touch flow and cube but so far I ain't able.
I tried out TNT_5.0_Wizard_TouchFLO and NBK 9 on the Tnt i did it with active sync. I noticed on using TNT at starting my phone on i Get a TNT windows mobile 6 screen then when the phone boots up it customizes cingular and im back with windows mobile 5.
anyway to put windows mobile 6 and touch flo.
thanks for the help
When downgrading your phone so that you can unlock it - you need
Both IPL and SPL @ 1.XX
Yours are not the same - so you need to redo the process to get these two numbers to match. Flash the button rom.
Then, you need to flash a stable oem rom - like the Tmobile 2.26
In order to flash WM6 roms - you need ipl and spl of 2.XX or greater.
You've mentioned that you did some reading - do a little more. Read the unlocking and flashing a wizard posts, follow each step - do not skip any. Take your time, the how to's are very detailed - but they are bang on.
Good luck
htc 8125 problem!
Hi that such I have written for several sides asking the same thing, which happens it is that I have a htc cingular 8125 and need the help someone who can devote a solution to the problem that on having connected my htc to the pc, the activesync it synchronizes well and habia could before formatting the memory could spend(pass) of quite files etc.. But now after erasing I want to install any rom and it turns out that the rom does not recognize the htc, me mistake and the this battery 100 % loaded, the cable in good conditions, I changed the framework into the last one to the pc etc.. And nonetheless I could not have installed the rom.. not that to do.
Thanks...sorry for my bad english.
Is your phone a G3? Install SuperCID.
Is your phone a G4? Run HardSPL.
Once that is done, you should be able to load the Wizard Love ROM.
Then, you should be able to load any WM6 ROM from these boards.

Categories

Resources