New to HTC S710, upgraded from a faraday 2125.
My bluetooth doesn't work properly with my car. HTC support says it because the S710 has a new BT stack. Is there anyway to downgrade or change the stack?
The phone does pair, howerver I can't have a conversation.
I tried the latest OEM rom and well as Dr. 6.1 v1.1 and still no luck.
any suggestions?
no there is no way you can change the inbuilt stack.
have you tried contacting the carkit support to find out a way.
The carkit in built in from Infinit, is that what you mean?
I notice that some guys were able to change the stack on the blue angel, I was hpoing the same could be done here.
Any idea if that stack for the blue angel would work with this phone?
Related
I have seen various posts regarding this subject. Both on this forum as on various other sites around the globe. Nowhere I have found an easy 'this is how you do it' manual on getting a Handsfree bluetooth profille on a MDA.
I was really happy when I encountered the 'PocketPC Bluetooth Tools' which page indicated the version 1.1 (released in April 2004) added the Handsfree profile.
I installed it without success. Do I need a different BT stack ? I now have the standard MS stack. I am running 1.60 WWE on a dutch MDA.
Any response (positive or negative) is appreciated.
I am trying to get the MDA working with the Parrot CK-3100 carkit.
Excellent carkit, but now only able to use using the Headset profile.
Thanks,
Taco
tscargo said:
I have seen various posts regarding this subject. Both on this forum as on various other sites around the globe. Nowhere I have found an easy 'this is how you do it' manual on getting a Handsfree bluetooth profille on a MDA.
I was really happy when I encountered the 'PocketPC Bluetooth Tools' which page indicated the version 1.1 (released in April 2004) added the Handsfree profile.
I installed it without success. Do I need a different BT stack ? I now have the standard MS stack. I am running 1.60 WWE on a dutch MDA.
Any response (positive or negative) is appreciated.
I am trying to get the MDA working with the Parrot CK-3100 carkit.
Excellent carkit, but now only able to use using the Headset profile.
Thanks,
Taco
Click to expand...
Click to collapse
No you shouldn't ned a different bluetooth stack, as the pocketpc tools do everything automatically. I installed it and have it working successfully on my XDA II with 1.60 WWE.
andygee said:
No you shouldn't ned a different bluetooth stack, as the pocketpc tools do everything automatically. I installed it and have it working successfully on my XDA II with 1.60 WWE.
Click to expand...
Click to collapse
Could you please indicate WHAT is working successfully. Do you mean you are succesfully operating a 'handsfree profile' carkit ?
If so, do you get an option to select the handsfree profile in the MDA/XDA ?
I only get 'Headset'....
Thanks,
Taco
tscargo said:
andygee said:
No you shouldn't ned a different bluetooth stack, as the pocketpc tools do everything automatically. I installed it and have it working successfully on my XDA II with 1.60 WWE.
Click to expand...
Click to collapse
Could you please indicate WHAT is working successfully. Do you mean you are succesfully operating a 'handsfree profile' carkit ?
If so, do you get an option to select the handsfree profile in the MDA/XDA ?
I only get 'Headset'....
Thanks,
Taco
Click to expand...
Click to collapse
Oh sorry. I only get the headset side working as well.
I read somewhere that the Parrot BT carkit can be configured to use the BT headset profile (and therefore works with MDAII)
Yes, that's right. I use the Parrot in the car with my 02 XDA II (stock ROM 1.66WWE). Works great and supports the headset profile.
Where can youget this programm?
The Parrot (in this context ) is not a program / software, but hardware. Its a handsfree kit.
You dont need additional software for it to work.
For three days I have been having ck3000.
I use it with BTTools 10.12.
With vito voice to dialer you can mark by means of the voice, but using the mike of the XDAII, not the one of ck3000.
It works fine.
If I install widcomm BT stack, parrot not work nor with MS stack.
Ok guys, I made it quite clear in my first post that I was looking for the Handsfree profile. The headset profile works fine even without Pocket Bluetooth Tools. To be honest, with version 1.1 it does not work all that great actually. So I am planning to uninstall the additional software.
I am still puzzled why the website for PBT indicated support for a Handsfree (=carkit) profile in version 1.1.
I tried contacting the author, but he is not responding unfortunately, nor has the software been updated since april.....
So to be short: there is no-one that has created a (working) handsfree profile on his/her XDA.....
Hi All,
Has anyone got the Widcomm stack working on the Magician (Jam etc)?
The 1.5.0.8 stack worked both under WM2003 and WM2003se on an MDAII but doesn't work on the magician.
Does the magician use a different bluetooth module ? Is it possible to adapt the registry?
Any help in getting this working, or any other solutions to get the magician connected to a BT Access point would be very much appreciated.
Thanks in advance,
Martin
WIDCOMM STACK
I ALSO NEED THE WIDCOMM STACK FOR THE MAGICIAN
WHY DO THESES MANUFACTURERS ALWAYS COME UP WITH THE APPALLING ALTERNATIVE BLUETOOTH STACKS
DID NO ONE LEARN FROM THE XDA 2 !!
WIDCOMM IS GREAT EVEN ON THE HP 6340.
Working BlueSoleil BT Stack
I think this is what you're searching for...
It works for me.I'm using 1.13 radio, 1.13 Rom, no ExtRom.
It hasn't got 60 days evaulation, and added a Bluetooth switch to switch BlueSoleil Stack to MS Stack and vice versa, if you want to.
Try it and post the result...
Re: Working BlueSoleil BT Stack
I have problem with it. The blue diod is not lighting.....I dont know, what I going to do....HELP PLEASE!!!! The starck is running, but it dont work.....HELP....
Re: Working BlueSoleil BT Stack
How I network BlueSoleil stack with Widcomm.
Re: Working BlueSoleil BT Stack
sejra said:
I have problem with it. The blue diod is not lighting.....I dont know, what I going to do....HELP PLEASE!!!! The starck is running, but it dont work.....HELP....
Click to expand...
Click to collapse
The led does not work but bluetooth itself does. I have no led too, bluesoleil runs pretty ok for the things it must do.
Re: Working BlueSoleil BT Stack
HyperMalac said:
I think this is what you're searching for...
It works for me.I'm using 1.13 radio, 1.13 Rom, no ExtRom.
It hasn't got 60 days evaulation, and added a Bluetooth switch to switch BlueSoleil Stack to MS Stack and vice versa, if you want to.
Try it and post the result...
Click to expand...
Click to collapse
I think the bluesoleil does not support the phone BT headset, only the stereo BT headset. That's not much good for a Pocket PC phone.
Re: WIDCOMM STACK
jonboy8841 said:
I ALSO NEED THE WIDCOMM STACK FOR THE MAGICIAN
WHY DO THESES MANUFACTURERS ALWAYS COME UP WITH THE APPALLING ALTERNATIVE BLUETOOTH STACKS
DID NO ONE LEARN FROM THE XDA 2 !!
WIDCOMM IS GREAT EVEN ON THE HP 6340.
Click to expand...
Click to collapse
That is the Microsoft BT stack, when the Magician was on the drawing boards it was thought that the industry would go MS. Instead it went WIDCOMM.
The Magician could run WIDCOMM, but someone would have to write hardware drivers, and no one has. So no, it cannot be done. Too bad, the WIDCOMM works so well...
Thx
This file is 100% working fine with I-Mate JAM Black. Thx.
HyperMalac: ive tried that on my magician, but it wont work, it want me to configure the driver or something...
When installed, using BlueSoleil stack, a window pops up saying
"Your bluetooth device initialization fails! Do you want to configure it manually?"
If i select no it just shuts down and my blutooth is unusable.
If i select yes it wants me to select among a couple of options:
USB, BCSP, UART(H4)
and user defined, which forces me to select a dll, but i dont know which...
Ive tried all options and none works....
Help whit this is VERY MUCH appriciated!
EDIT: Now for which every reason, it worked, dunno what I did, but now I'll never switch back to MS stack!
Hello,
Bt MS stack is apparently not compatible with all BT headset, hands free en car kit devices. I have been trying to pair my pocketphone pda with a pioneer car kit without a successful result, the image of the hands free appears on the BT manager ‘as pioneer BT unit’, but the standard pin code 0000 or 1111 is always rejected.
Pioneer technical service couldn’t help, they say normally it should work with almost all BT headset devices and a compatibility list of the product is not available.
I guess the problem lays on the BT package. Is there a way to solve this issue by creating for example a BT compatibility patch, or changing something in the registry to make it compatible. Widcomm stack is better en compatible than the MS stack according to many users. Does anybody have any clue?
My device is upgraded to WM6 with always the same sad result.
Thanks
Hi, I have a pioneer bluetooth stereo in my car too, Found it a bit difficult to get paired at first, but it eventually worked. Although it would not give me the hands free profile, only the headset profile, which means I have to initiate and anwer the calls from the phone :-(
thinking about looking at the widcomm stack if I can get it running on WM6
For your information, I have tried the widcomm om my device ‘the last version’, but when I click on the bt icon in today screen, the blue led start flashing for a while but stops with “ memory storage error” . There are some bugs which should be corrected or some registry hack to get it work. However, the widcomm is far much better and stable than the MS BT stack ‘this later sucks’.
Apparently, you have a built-in bt unit, I have a pioneer 6800 + BT unit device optional, it worked perfectly with my old qtek 9090 as a hands-free and an BT audio device without any problem.
This works flawlessly with 6.0 based ROMs, but with any of the 6.1 flavored ROMs I have tried, the pairing process fails. Is there something fundamentally different between 6.0 and 6.1 in the BT stack that would explain this? Any tweaks you might know of that could fix the problem? Basically, while pairing, the car system sends a "Authorization Unsuccesful" message and the phone rejects the pairing. Because of that I am stuck with 6.0.
I am using my bluetooth car cd player with my Tytn using a 6.1 Dutty's rom. Works perfectly. Try using the april 29 rom just for testing.
i use the rom and radio in my signature and have no problem pairing with car's BT.
No such problem w/ stock 6.1 or Dutty's rom w/ my Jvc BT-1 or Sony Ds-220
No problems with Jabra SP5050 and rom in signature.
ok. it might souns weird but:
I found that paring while your phone is in call (call in progress) will give you better results.
Also, i have seen reports that while phone is in call paring with TomTOM GO will ofer even DUN option while it does not normally offered on majority of WM6.x handsets. (DUN is available on Diamond phones).
I cannot confirm the DUN phenomenon, but paring works def better for me while in call.
I have no logical expanation to this.
Hi,
When using the Polaris with standard Dutch ROM in a Renault Laguna with built-in carkit system, the sound is very crappy. The paring goes fine, but the sound in the car is crap. Moreover, the other side cannot even hear my voice at all. I apllied the 2 hotfixes from HTC e-club, but that didn't help. Is it possible to change the bluetooth stack from MS to Widcomm or something, or is there any other solution?
Any help is surely appreciated!
Wouter
I had the same problem with my Mondeo (2008). I changed rom to WWE 6.1 (PdaViet V23 - at this moment) and problems disappeared. Perfect reception (both ways) and also all contacts visble through car touch screen..
Thanks a lot for your reply. Good to know that that's an option. I'll keep it in mind. However, I'm kind of hoping for a solution that doesn't require using another ROM, for warranty reasons...
The problem was finally solved by a software update on the car, done by the local renault dealer.