Hi All,
Has anyone got the Widcomm stack working on the Magician (Jam etc)?
The 1.5.0.8 stack worked both under WM2003 and WM2003se on an MDAII but doesn't work on the magician.
Does the magician use a different bluetooth module ? Is it possible to adapt the registry?
Any help in getting this working, or any other solutions to get the magician connected to a BT Access point would be very much appreciated.
Thanks in advance,
Martin
WIDCOMM STACK
I ALSO NEED THE WIDCOMM STACK FOR THE MAGICIAN
WHY DO THESES MANUFACTURERS ALWAYS COME UP WITH THE APPALLING ALTERNATIVE BLUETOOTH STACKS
DID NO ONE LEARN FROM THE XDA 2 !!
WIDCOMM IS GREAT EVEN ON THE HP 6340.
Working BlueSoleil BT Stack
I think this is what you're searching for...
It works for me.I'm using 1.13 radio, 1.13 Rom, no ExtRom.
It hasn't got 60 days evaulation, and added a Bluetooth switch to switch BlueSoleil Stack to MS Stack and vice versa, if you want to.
Try it and post the result...
Re: Working BlueSoleil BT Stack
I have problem with it. The blue diod is not lighting.....I dont know, what I going to do....HELP PLEASE!!!! The starck is running, but it dont work.....HELP....
Re: Working BlueSoleil BT Stack
How I network BlueSoleil stack with Widcomm.
Re: Working BlueSoleil BT Stack
sejra said:
I have problem with it. The blue diod is not lighting.....I dont know, what I going to do....HELP PLEASE!!!! The starck is running, but it dont work.....HELP....
Click to expand...
Click to collapse
The led does not work but bluetooth itself does. I have no led too, bluesoleil runs pretty ok for the things it must do.
Re: Working BlueSoleil BT Stack
HyperMalac said:
I think this is what you're searching for...
It works for me.I'm using 1.13 radio, 1.13 Rom, no ExtRom.
It hasn't got 60 days evaulation, and added a Bluetooth switch to switch BlueSoleil Stack to MS Stack and vice versa, if you want to.
Try it and post the result...
Click to expand...
Click to collapse
I think the bluesoleil does not support the phone BT headset, only the stereo BT headset. That's not much good for a Pocket PC phone.
Re: WIDCOMM STACK
jonboy8841 said:
I ALSO NEED THE WIDCOMM STACK FOR THE MAGICIAN
WHY DO THESES MANUFACTURERS ALWAYS COME UP WITH THE APPALLING ALTERNATIVE BLUETOOTH STACKS
DID NO ONE LEARN FROM THE XDA 2 !!
WIDCOMM IS GREAT EVEN ON THE HP 6340.
Click to expand...
Click to collapse
That is the Microsoft BT stack, when the Magician was on the drawing boards it was thought that the industry would go MS. Instead it went WIDCOMM.
The Magician could run WIDCOMM, but someone would have to write hardware drivers, and no one has. So no, it cannot be done. Too bad, the WIDCOMM works so well...
Thx
This file is 100% working fine with I-Mate JAM Black. Thx.
HyperMalac: ive tried that on my magician, but it wont work, it want me to configure the driver or something...
When installed, using BlueSoleil stack, a window pops up saying
"Your bluetooth device initialization fails! Do you want to configure it manually?"
If i select no it just shuts down and my blutooth is unusable.
If i select yes it wants me to select among a couple of options:
USB, BCSP, UART(H4)
and user defined, which forces me to select a dll, but i dont know which...
Ive tried all options and none works....
Help whit this is VERY MUCH appriciated!
EDIT: Now for which every reason, it worked, dunno what I did, but now I'll never switch back to MS stack!
Related
I have seen various posts regarding this subject. Both on this forum as on various other sites around the globe. Nowhere I have found an easy 'this is how you do it' manual on getting a Handsfree bluetooth profille on a MDA.
I was really happy when I encountered the 'PocketPC Bluetooth Tools' which page indicated the version 1.1 (released in April 2004) added the Handsfree profile.
I installed it without success. Do I need a different BT stack ? I now have the standard MS stack. I am running 1.60 WWE on a dutch MDA.
Any response (positive or negative) is appreciated.
I am trying to get the MDA working with the Parrot CK-3100 carkit.
Excellent carkit, but now only able to use using the Headset profile.
Thanks,
Taco
tscargo said:
I have seen various posts regarding this subject. Both on this forum as on various other sites around the globe. Nowhere I have found an easy 'this is how you do it' manual on getting a Handsfree bluetooth profille on a MDA.
I was really happy when I encountered the 'PocketPC Bluetooth Tools' which page indicated the version 1.1 (released in April 2004) added the Handsfree profile.
I installed it without success. Do I need a different BT stack ? I now have the standard MS stack. I am running 1.60 WWE on a dutch MDA.
Any response (positive or negative) is appreciated.
I am trying to get the MDA working with the Parrot CK-3100 carkit.
Excellent carkit, but now only able to use using the Headset profile.
Thanks,
Taco
Click to expand...
Click to collapse
No you shouldn't ned a different bluetooth stack, as the pocketpc tools do everything automatically. I installed it and have it working successfully on my XDA II with 1.60 WWE.
andygee said:
No you shouldn't ned a different bluetooth stack, as the pocketpc tools do everything automatically. I installed it and have it working successfully on my XDA II with 1.60 WWE.
Click to expand...
Click to collapse
Could you please indicate WHAT is working successfully. Do you mean you are succesfully operating a 'handsfree profile' carkit ?
If so, do you get an option to select the handsfree profile in the MDA/XDA ?
I only get 'Headset'....
Thanks,
Taco
tscargo said:
andygee said:
No you shouldn't ned a different bluetooth stack, as the pocketpc tools do everything automatically. I installed it and have it working successfully on my XDA II with 1.60 WWE.
Click to expand...
Click to collapse
Could you please indicate WHAT is working successfully. Do you mean you are succesfully operating a 'handsfree profile' carkit ?
If so, do you get an option to select the handsfree profile in the MDA/XDA ?
I only get 'Headset'....
Thanks,
Taco
Click to expand...
Click to collapse
Oh sorry. I only get the headset side working as well.
I read somewhere that the Parrot BT carkit can be configured to use the BT headset profile (and therefore works with MDAII)
Yes, that's right. I use the Parrot in the car with my 02 XDA II (stock ROM 1.66WWE). Works great and supports the headset profile.
Where can youget this programm?
The Parrot (in this context ) is not a program / software, but hardware. Its a handsfree kit.
You dont need additional software for it to work.
For three days I have been having ck3000.
I use it with BTTools 10.12.
With vito voice to dialer you can mark by means of the voice, but using the mike of the XDAII, not the one of ck3000.
It works fine.
If I install widcomm BT stack, parrot not work nor with MS stack.
Ok guys, I made it quite clear in my first post that I was looking for the Handsfree profile. The headset profile works fine even without Pocket Bluetooth Tools. To be honest, with version 1.1 it does not work all that great actually. So I am planning to uninstall the additional software.
I am still puzzled why the website for PBT indicated support for a Handsfree (=carkit) profile in version 1.1.
I tried contacting the author, but he is not responding unfortunately, nor has the software been updated since april.....
So to be short: there is no-one that has created a (working) handsfree profile on his/her XDA.....
Hi,
I have a Nokia HDW2 bluetooth headset for the XDA2, it's pretty bad, keeps dropping off, not sure if their is a better bluetooth headset on the market or whether I need to upgrade the bluetooth stack on the XDA2, any advice please?
Reyser
reyser said:
Hi,
I have a Nokia HDW2 bluetooth headset for the XDA2, it's pretty bad, keeps dropping off, not sure if their is a better bluetooth headset on the market or whether I need to upgrade the bluetooth stack on the XDA2, any advice please?
Reyser
Click to expand...
Click to collapse
I believe Jabra 250/258 has the best connection insofar.
G2 seems to be good as well.
I understand Nokia BT does not use generic BT standards, and
Sony Ericsson Headsets are erratic.
Cheers.
Thanks Henry,
has anyone tried upgrading the bluetooth stack? Also in Singapore the XDA2 has a decent BT headset in their recent offer, what make is this?
lots of people have upgraded their bluetooth stack well not really upgraded because ms dont have any upgrades
but you can put the vidcomm bluetooth stack on it a lot of people in the forum have don that
You can find the Widcomm stuff here: http://forum.xda-developers.com/viewtopic.php?t=11729
do you have any instructions for Widcomm, tried to install but kept getting errors for all exe files
I just got my JAM and the MS Stack doesn't work with my Audi MMI System BT. The PDA2K Widcomm stack 1.1 did, but not the JAM. I can partner but no functionality.
Has anyone tried using the MDA II/XDA II BT Tools that helped that devices MS BT Stack with the JAM?
I love the JAM, but the MS Stack has so little menu functions.
yes it works perfect for me ... the same functions in xda2
Having quite same problems with Nokia carkit, after pairing connection dies quickly and doesn't work. Under BT devices menu "set as hands-free" is grayed out and also using bluetooth tools doesn't make difference, the connection screen just disappears quickly when pairing so can't change profile, maybe it's due incompability...
Don't know if it's possible to change BT stack but at the moment this thing sucks...
GPS Navman 4410 on Qtek S100
Sounds like the same problem I have with my GPS-connection (Subject GPS)
Could someone post the Bluetooth Tools file? I can't find it anywhere on my system or on the web.
thanks
Paragon said:
Could someone post the Bluetooth Tools file? I can't find it anywhere on my system or on the web.
thanks
Click to expand...
Click to collapse
http://www.bluetooth.jazztel.es/
Thanks kha!
Tools doesn't work well on my JAM!
Hi!
I´ve tested the Pocket Bluetooth Tools as well, but it doesn´t worked on my MDA compact (German ROM). When the software was installed, the BT doesnt work anymore.
My special problem is with the Royaltek RBT 3000 and the download of the tracks to the pda. Each time i try this, the connection breaks after 200 waypoints approx. The normal use with the navigation software like TomTom works well.
Looking for a solution.
Regards
FluBeX
i have an imate jam. i have paired my imate with my computer. the problem i have is i would like to use my computer as a headset. inother words i would like to use the computers speakers and mic over the bluetooth for my imate. i can do this with other mobiles i have but would like to find a way to do it with my imate.
thanks
jay
Maybe this thread can help you
http://forum.xda-developers.com/viewtopic.php?t=33532
Cheers, M
thanks for the link, but i need it the other way round. i would like to use the pc as a headset. my other mobiles have the services on it, but the imate does not. is there another install to make the imate use the pc speakers and mic as a headset
Don't know I'm not so into the BT business yet (only got a BT gps). There's a BlueSoleil BT stack as well you should be able to find it easily.
Success, M
did a search and could not find this stack.
Have you been here?
Bluesoleil BT stack + manager, stable and more profiles
http://forum.xda-developers.com/viewtopic.php?t=18537
Got 7 pages overthere.
thanks will try it
New to HTC S710, upgraded from a faraday 2125.
My bluetooth doesn't work properly with my car. HTC support says it because the S710 has a new BT stack. Is there anyway to downgrade or change the stack?
The phone does pair, howerver I can't have a conversation.
I tried the latest OEM rom and well as Dr. 6.1 v1.1 and still no luck.
any suggestions?
no there is no way you can change the inbuilt stack.
have you tried contacting the carkit support to find out a way.
The carkit in built in from Infinit, is that what you mean?
I notice that some guys were able to change the stack on the blue angel, I was hpoing the same could be done here.
Any idea if that stack for the blue angel would work with this phone?