Database Info

See contacts name when an SMS arrives / HTC S710 / WM6

Hi
I have a question, I have a HTC S710 running WM6. When I get an SMS
instead of showing the name of the person that sent it, it shows the
number even I have the contact stored. What I figured is that the
stored number is XXX-XXXX and the SMS comes from +506 XXXXXXX.
In other phones Ive had (Nokia, Sony Ericsson) when an SMS comes from
that number, it does associate it with the contact name.
Any ideas on how to get this done on the HTC S710?
Thanks in advance,
Dan

I don't see anything else than modify the whole phonebook and put +506 (or a needed one) at the beginning of all your numbers. Maybe all your phones were able to display correct number, but I'm afraid that WM can't do it

Nokia only compares the last 7 digits from the right.

I think it's also depends on the network you are connected to.
that's what someone told me anyway so don't take my word from it... here we don't have that problem (even if the number is sored without +972 it still show the name of the contact when SMS arrives).

Of smartdialing and multiple numbers in a contact.

I have a contract with my cellphone company that provides me besides normal cellphone service, unlimited calls to a group of people in my country, all people in that group are identified with an aditional short phone number, so we have two phone numbers in our SIM, the normal one and the short one.
Happens that we use the short number to call ourserlves in the group (we could also use the normal number, but that'd be charged in my invoice as a normal call), but the normal phone number is always shown in our phones as incoming number when receiving a call from the group or outside, and that's how it is saved in call log.
So, in my contacts list, each contact has the two numbers added (I've set the normal phone number as cell phone number, and the short number as work phone).
Now the problem, the way smartdialer in WinMo5 and later work is to show the last call (made/missed/received) of every contact, then contacts list (if contact not already shown before), and after receiving a call from the group in my case the normal number is shown, and there's no way to use the short number to reply, unless I take the long path and go to contacts list and choose the contact and number manually; usually I'm in a hurry and just forget and call the contact using smartdialing and happens that the normal number is dialed.
I had no problem using smardialing with WinMo2003 as there was an option to choose a default number when there were multiples numbers on a contact, so, no matter what number a contact used to call me, when using smartdialing the default number was always chosen, I see no equivalent in WinMo5 or later.
Now, is there a way to replicate that behavior from WinMo2003? (registry/patch/etc.), thanks for taking the time to read.
P.D. the same can be said when we have multiples numbers in a contact (work/home/etc.) and receive calls from some of them but just want to reply to just one of them.

[solved] Problem with Contacts and International Country Codes

So Ive been using my HTC Ozone (6.5 Standard, 3VO rom) for a while in israel, and the way the cellular network works is as follows:
country code is +972
the number that shows up on an incoming call is 052-555-5555.
The number that shows up on an incoming text is +972-52-555-5555.
The number that shows up on an outgoing call when dialing without the country code (aka 052-555-5555) is +972-052-555-5555.
All of these differences mean that if I have a number saved in the contact manager (in only one of the above forms), it isnt displayed 2/3rds of the time. If i send a text to ME(052-555-5555), the reply comes back from an unsaved number, in a new thread is +972-52-555-5555.
Is there a way for me to just save the base number (052-555-5555), and have the phone's contact manager realize that its the same number is the +92 equivalent? My current workround is saving all the forms of a number to a contact, but 1. its tedium to go through all my contacts and do this, and 2. you can only save so many numbers to a contact, which means im screwed if the contact has two different numbers.
I see all these fields in the "current country" setting, but I have no idea what they mean, or if that is even the solution.
Any help would be greatly appreciated.

hey , i got the same problem on my Omnia 2 with windows mobile version 6.5
The local incoming call won't show the country code, and sms does the opposite way.
check through all my phone setting, can not find any related option for this.
Thanks for anyone can provide a resolution.

i just resolved my problem. hope this way can help you as well.
get a regedit software on your windows mobile phone.
go to HKEY_CURRENT_USER/ControlPanel/Phone
under it, you should able to see a key name "CallIdMatch", change the value to maybe 8 or 9, which means it will match the last 8 or 9 numbers for each incoming call or sms. (use decimal) after the changing, reboot your phone.

Wow, it worked!!
Thanks a lot man!

thanks for the tip jason_ma!
i was also wondering about it.

Anyone know how to edit CalIidMatch an an HTC hero

[Q] International Dialing

Having searched this and various other forums I'll see if anyone here can help on this item. I've been using WM devices and XDA for many years and have now had to switch to a Droid 2 Global on Verizon due to work rather than choice. For over ten years I have entered my outlook contacts in the format +XX (YYY) ZZZ-ZZZZ where obviously, XX=country code.
When I dial by contact on the droid it fails and tells me the number is disconnected etc.
If I manually enter the number using this format with the "+" sign into the dialer then it switched the "+" to "011" and dials successfully.
If I create the contact on my phone and enter the "+" sign in the phone number it seems to automatically create a second number entry as "011" as well so it then dials successfully.
The odd part is several colleagues seem to be able to use their existing outlook contacts in the same format successfully.
I have tried switching on and off the assisted dialing and it doe snot seem to make any difference, calls still fail to go through.
I am using a D2G with a stock (but rooted) ROM
System 2.4.330.A956.Verizon.en.US
Android 2.2
Baseband N_01.48.05R
Apologies if I have missed something obvious, I know my way around WM but this is all new. Thanks in advance for any help.

I had a couple of issues with telephone number formats, installing the "More Locale 2" app (available on the market) seemed to fix them.
Mine was more a presentation issue though, I'm not sure if it will solve your dialer problem but it's worth a try.

Displaying A Selected Contact In Call Log When Multiple Contacts Share Same Number

The following Google Contacts are stored in an Android Phone for ACME Corporation:
Amy Appleseed
John Doe
Pedro Valdez
Amy, John and Pedro all share a work telephone number.
I'm working with Pedro on a project and would like to track the dates and times of our phone conversations using the call log on my Android phone.
However, even though Pedro is manually selected from the contact list, Amy Appleseed appears as the called party because she is the first contact for ACME Corporation, which are listed alphabetically.
This behavior can be consistently duplicated on a Motorola Milestone X2 (Droid X2) running 2.3.6 stock but this has been an issue on every Android phone I have ever owned from Android 2.1 to 2.3.6.
Is there any way that I can call Pedro AND have his name appear in my Call Log using Android?

I think that's just the way it works. i.e. the call log program is unaware of how the call was made--it just knows which number was dialed and at what time and resorts to a reverse look up to get the name. You can sort of see this from the way the numbers pop up...and then the names start filing in. Also, after adding a new contact for a number, the contact name magically appears in the call log.
I know its a hack, but what if you try variations on the number for your contacts with the same phone number? For example:
123-123-1234
123-1234
+1-123-123-1234
1-123-123-1234
Depending on your phone company, these may all dial the same phone number (but, you'll want to confirm that they won't charge you long distance for using 11 digits to dial a local number). With luck, they may fool Android into thinking that they're different phone numbers.
As for incoming calls, though, you may want to make a contact for just the company with a number that matches whatever your call display pops up when either person calls. There's no way it'll know who's on the other end if the call display is the same across your colleagues.
Hope this helps,
- chris

Hi cttttt,
Thanks for the response. The reverse lookup of the first contact listed for a number is understandable for an incoming call, but I would think there should be a way where dialing outbound from a manually selected contact would write the selected contact name to the Call Log.
Is this something that could be accomplished with a third party app? Perhaps a dialer with a contact look-up that rewrites the call log to reflect the selected contact (or keep a call log of its own)?
I'd appreciate the input of a developer or anyone with experience with the OS to suggest whether this can be accomplished programmatically...

Found It!
I was searching for the same thing for my GS3 and found this solution:
[Since I am new, it won't let me post the link...which is the helpful part. here is an attempt to get you the information anyway.]
souvey.com
2009/03/android-advice-shared-home-phone-numbers
Short answer: create a contact on the phone (not google/gmail), it seems to search those first.
The link gives other stuff you can do; I found the above to work quite well.

CDLaurent said:
I was searching for the same thing for my GS3 and found this solution:
[Since I am new, it won't let me post the link...which is the helpful part. here is an attempt to get you the information anyway.]
souvey.com
2009/03/android-advice-shared-home-phone-numbers
Short answer: create a contact on the phone (not google/gmail), it seems to search those first.
The link gives other stuff you can do; I found the above to work quite well.
Click to expand...
Click to collapse
Unfortunately ,that site no longer exist but I'm curios about same problem ,call log for outgoing calls shows first contact with that number

rain125 said:
Unfortunately, that site no longer exist but I'm curios about same problem, call log for outgoing calls shows first contact with that number
Click to expand...
Click to collapse
I found it by searching for the url in this web archive: web.archive.org
I am pasting the content here, in case that archive gets lost too:
Android Advice: Shared Home Phone Numbers
One of the things that has always annoyed me with cell phones is that there is no good way to handle multiple people having the same home phone number. Android’s contact manager allows multiple contacts to share the same number (because the database is not indexed by phone number, like on many older phones). This still wasn’t perfect for me, however. When a phone number shared by multiple contacts calls, the first match (sorted alphabetically A-Z) is displayed on the caller ID screen and in the call log. Fortunately, this consistency means we can manipulate the system to display a custom name. The following steps illustrate the technique:
1. Lets say we have a theoretical family: John and Jane Smith. They each have a cell phone, but live together and therefore share a home phone number. They each are added in Android with their mobile number as their primary number, and their home number as their secondary number. Both can be called at either their home or mobile number from the contact list. When a phone call is recieved from their home number, Jane Smith is displayed in the caller id and call logs because she is first alphabetically.
2. For this technique to work cleanly (without any additional clutter), you must have your Android contact manager set only to display “My Contacts” (this settings is under Contacts > Menu > Display Group > My Contacts)
3. Log into Gmail and switch the contacts view
4. Create a new group to put these combined “metacontacts” (I called the group “Metacontacts”)
5. Force your G1 to synchronize contacts (Home Screen > Menu > Settings > Data synchronization > Uncheck and then recheck “Contacts”)
6. Tell your G1 to synchronize this new “Metacontact” group (Contacts > Menu > Edit sync groups > Check “Metacontacts”)
7. On your Gmail Contact Manager, in the “Metacontact” group, press the new contact button (person with a +)
8. Enter the name you want to display when the number calls (ex: “The Smith Family” or “John and Jane Smith”)
9. Add some form of symbol in front of the contact’s name to cause it to be first alphabetically. I used a period because it takes up the least space, and then put a period at the end as well for symmetry ( .The Smith Family. )
10. Add the shared home phone number to this new contact
11. Press the save button
12. Press the “Groups” button and then click “Remove from… My Contacts”. This will prevent the contact from showing up in Android’s contact list, but because we chose to synchronize the “Metacontacts” group, it will still be in Android’s database when it does a caller ID lookup.
13. Repeat steps 7-12 for each custom home phone number contact
14. Force your G1 to synchronize contacts again (Home Screen > Menu > Settings > Data synchronization > Uncheck and then recheck “Contacts”)
15. The new custom contact name will now show up in the call logs and when the number calls, but each individual contact (ex: John and Jane) will still have the number stored, so you can call their home number by clicking their name in contacts.
It works almost perfectly for me, but there are few caveats to this method that you should be aware of:
Every time you change the combined contact (“metacontact”), it automatically readded to the “My Contacts” group and you will have to remove it
The combined contact (“metacontact”) will have the symbol you chose (in my case, a period) in front of their name, so if this bothers you, this isn’t the technique for you