Having searched this and various other forums I'll see if anyone here can help on this item. I've been using WM devices and XDA for many years and have now had to switch to a Droid 2 Global on Verizon due to work rather than choice. For over ten years I have entered my outlook contacts in the format +XX (YYY) ZZZ-ZZZZ where obviously, XX=country code.
When I dial by contact on the droid it fails and tells me the number is disconnected etc.
If I manually enter the number using this format with the "+" sign into the dialer then it switched the "+" to "011" and dials successfully.
If I create the contact on my phone and enter the "+" sign in the phone number it seems to automatically create a second number entry as "011" as well so it then dials successfully.
The odd part is several colleagues seem to be able to use their existing outlook contacts in the same format successfully.
I have tried switching on and off the assisted dialing and it doe snot seem to make any difference, calls still fail to go through.
I am using a D2G with a stock (but rooted) ROM
System 2.4.330.A956.Verizon.en.US
Android 2.2
Baseband N_01.48.05R
Apologies if I have missed something obvious, I know my way around WM but this is all new. Thanks in advance for any help.
I had a couple of issues with telephone number formats, installing the "More Locale 2" app (available on the market) seemed to fix them.
Mine was more a presentation issue though, I'm not sure if it will solve your dialer problem but it's worth a try.
Related
Anyone using, or planning to use, the HTC Touch Cruise on the UK T-Mobile network will very probably need to do a special setup on their device to get voicemail access working properly.
The symptom is that your callers will be able to leave you voicemail messages but you will not be able to pick them up from your phone. When you get a voicemail message you will get the notification but when you press the soft key to access voicemail it will dial the number but you will then get an error message saying "access to this number is barred" and the system will hang up on you.
If you try accessing voicemail by holding down the "1" key or by explicitly dialing the voicemail access number retrieved from the network (probably of the form "+44050<your mobile number minus the leading zero>" or ""+44068<your mobile number minus the leading zero>") you will get the same message. Dialing 222 will work but will also initiate a voicemail setup message each time and however many times you switch your phone on and off to reload the voicemail settings from the network it still won't work.
I just spent 2 days with the very helpful T-Mobile support to sort this out, ultimately getting escalated up two levels in the technical support group, until I got someone who recognised the problem.
The issue is simple to resolve. The problem is that the format of the voicemail access number that the T-Mobile UK network pushes down to the handset is incompatible with the HTC software on the Touch Cruise (and maybe other devices too). The thing the software doesn't like is the "+" at the beginning.
To fix it go to the Settings/Personal/Phone application and click the second tab ("Services"). Now select "Voice Mail and Text Messages" and click "Get Settings...". You should now see a screen with two access numbers populated, one for voicemail and the other for text messages. Both will probably start with "+44". The text message access number is OK so don't mess with that but the voicemail access number won't work with the UK network. Simply replace the "+" with "00" and click OK and then your voicemail should work as you expect.
I haven't tried accessing voicemail outside the UK so it is possible that the above might break your access when roaming and you might need to edit back the "+" when travelling. I'd be interested in knowing if anyone has any experience with non-UK access and a "0044..." setting rather than the default "+44...", does it dial the UK access number OK?
(Actually, I never looked at the mechanics of accessing voicemail outside the UK, does it still dial the UK number or does the host network automatically push an alternate local access number to your phone when you register with the network?)
- Julian
Nice on Julian. I bought an Orbit 2 on O2, but my number doesn't transfer to O2 for few days yet, so have been using my T-Mobile SIM, and also experiencing this problem.
Thanks for sharing the tip!
I'm on UK T-Mob Web&Walk. Switched the +44 entry to 0044...but my TC then coundn't send texts. Switched it back and fortunately can still access voicemail as well as send texts. Strange.
I'm with T-mobile running an old T-mobile sim card on my new TC, when first called voice mail it gave me a long introduction then said "turn of your mobile off and on again to not get this messages again", I turned TC to "air plain mode" back to on mode and everything was cool from there on.
It seems that not everyone have that problem OR T-mobile has sort out that problem after Julian told them about the problem. In any case, thanks Julian to share this with us.
PS (today after reading this post is the first time that I use voice mail with my new TC)
Similar problem on WM 6.5 Asus Crystal
I had exactly this problem with T-Mobile and WM 6.5.
T-Mobile technical support was excellent, ringing back on several occasions to ensure that the problem was fixed, even though my handset is not a supported model. Once I was put through to 2nd layer support they fixed it in seconds.
In a nutshell, if you text and voice service centre numbers begin with a +44......, change them to 0044......
This did not happen on my XDA Exec WM5.0, so appears to be a new thing in WM6.5?
This issue is concerning the G1 phone.
I recently downloaded an app named, Visual VoiceMail. Its supposed to be somekind of interactive list of all the voicemail I recieve, where I can interact and organize by hand on touch screen compared to calling my voicemail and deleting or saving any of my messages by touchtone.
In order for this app to work I must fill out a free registration form that includes my telephone number.
My issue is, Im not sure if they want the telephone number of my phone (I assume they do) or my voicemail telephone number. Neither phone numbers worked.
I cant figure out why either of these numbers wont work for the registration. Every time I enter in a number and try to sumbit I recieve a notice that says, "!! Registration Failed, Unable to determine this devices phone number."
I went to settings, about phone, my phone number. There was no number listed under 'my phone number' and i dont know why that is.
If anyone has any information on how i can make this app work, or how to fix the status of 'my phone number' so it does have an actual phone number (at this moment there isnt an option to edit 'my phone number') it would be greatly appreciated. thank you.
So Ive been using my HTC Ozone (6.5 Standard, 3VO rom) for a while in israel, and the way the cellular network works is as follows:
country code is +972
the number that shows up on an incoming call is 052-555-5555.
The number that shows up on an incoming text is +972-52-555-5555.
The number that shows up on an outgoing call when dialing without the country code (aka 052-555-5555) is +972-052-555-5555.
All of these differences mean that if I have a number saved in the contact manager (in only one of the above forms), it isnt displayed 2/3rds of the time. If i send a text to ME(052-555-5555), the reply comes back from an unsaved number, in a new thread is +972-52-555-5555.
Is there a way for me to just save the base number (052-555-5555), and have the phone's contact manager realize that its the same number is the +92 equivalent? My current workround is saving all the forms of a number to a contact, but 1. its tedium to go through all my contacts and do this, and 2. you can only save so many numbers to a contact, which means im screwed if the contact has two different numbers.
I see all these fields in the "current country" setting, but I have no idea what they mean, or if that is even the solution.
Any help would be greatly appreciated.
hey , i got the same problem on my Omnia 2 with windows mobile version 6.5
The local incoming call won't show the country code, and sms does the opposite way.
check through all my phone setting, can not find any related option for this.
Thanks for anyone can provide a resolution.
i just resolved my problem. hope this way can help you as well.
get a regedit software on your windows mobile phone.
go to HKEY_CURRENT_USER/ControlPanel/Phone
under it, you should able to see a key name "CallIdMatch", change the value to maybe 8 or 9, which means it will match the last 8 or 9 numbers for each incoming call or sms. (use decimal) after the changing, reboot your phone.
Wow, it worked!!
Thanks a lot man!
thanks for the tip jason_ma!
i was also wondering about it.
Anyone know how to edit CalIidMatch an an HTC hero
Hello, This is my first post, I've done a lot of searching on here and google and am at my wits end with my google voice account and my new phone (Droid Charge).
It was working fine with my previous phone...and still does if i swap it to foward to it (Sprint - Blackberry Style).
I'm running PBJT kernel, and GummyCharged 1.7.5 - and did a wipe and cleared all of the options available to clear when flashing my rom.
Here is the problem: When I add my verizon droid charge's phone number into my google voice account it wants me to verify the phone. I hit call to verify but I never get the call. The only issue I could find on google voice help was people having problem entering the two digit code after the call comes through. That's not my problem. My call never comes through.
If I set it to another number, a different cell phone or land line...it rings and I can enter the 2 digit code, and it's working perfectly.
If I try to use the "add this phone" through google voice on my droid charge. It looks like it verifies because on the google.com/voice in the phones section it no longer says I need to verify. However, still having an issue because if you call the google voice number, it will not ring my verizon number (droid charge). It's worth noting that If I text it works. Just not the calls. Also if I leave a voicemail it will notify me on my phone as it should. The application works fine, etc. Just have never gotten it to ring my phone.
I'm about ready to have Verizon try and change my phone number, but wanted to ask here if anyone had any ideas to try. I honestly cannot remember if I tried to do it before rooting this phone, but my gut tells me I tried and it still didnt work. And yes, the checkbox to "forward calls to phone" is checked.
I've also tried from a friends google voice account seperate from mine. Tried to have them add my number, then when they need to do the verification step that calls the phone....of course...I never get the call.
Frustrating!
Thank you for any insight...
Is your GV number your primary number? If not you could also port your number over as an alternitave: google.com/support/voice/bin/answer.py?hl=en&answer=1065667
I know that there is an error saying my carrier is not supported when I try to setup my voicemail with the Charge, so I think it is either the phone or LTE. I had no problems setting it up when I used my Moto Droid, so I know Verizon works.
Since I'm already setup, I just ignore the error. That might not help you much, but like the suggestion porting your number will be your best bet. I hear switching back to a 3g phone temporarily will disable your sim card, and you'll have another headache on your hands.
Thanks for the replies. My sister actually has the same phone but stock etc etc. Going to have it forward to hers and see if that is a fix. I dont really want to have my google voice be my only number but I may do that porting if worse comes to worse.
Sent from my SCH-I510 using XDA App
Hi All
Sorry if this has been covered elsewhere or fixed, I couldn't find anything that covered this exact problem hence the post.
Also apologies in advance, this is gonna be a little long...
A little History:
====
I use my cell phone for both work and personal since I own my own business. I really hated having clients or potential clients knowing my direct cell phone number when calling them.
While I could program all of them into my cell with a *82 in front to block the caller id, I decided to go the other way so I wouldn't have to remember to do it on manually dialed calls.
Thus at my request, AT&T several years ago changed my network ANI default setting from "Allowed" to "Blocked" meaning by default, my caller id info is blocked when I dial, unless I put *82 in front of the number to override.
People in my phone book that I wanted my number unblocked for, I simply put *82 in front of their stored number.
At the time I did this I had a Blackberry Curve and all worked fine. I could call _AND_ SMS/TXT/MMS as normal - important to note.
Recently I got an Atrix 4g running Android 2.2 (now rooted). All was good until I tried SMS'ing a number in my phone book. Turns out the SMS app (default android app) does not like the *82 in front of the number. Instead of recognizing *82 as a valid ANI control code and thus ignoring/passing it, it thinks it is part of the actual phone number and errors out.
So now I have to have two numbers entered into every entry in my phone book that I want to be able to SMS or call without my number being blocked by default. One entry with *82 in front of it to call them unblocked and one entry without the *82 to be able to SMS them.
Anyone have any ideas how to get around this? As I see it it's something that either Motorola or the Android developers need to fix, i.e. telling the SMS app to ignore/pass valid ANI control codes.
Thanks in advance
for me is*31 i tryed that and it works for me in cm 7.1 rc1v2 rom (latest nightly) i am invisible for the other number i text with
remuseu said:
for me is*31 i tryed that and it works for me in cm 7.1 rc1v2 rom (latest nightly) i am invisible for the other number i text with
Click to expand...
Click to collapse
Is this the standard android text messaging app?
What country and carrier as well?