Hi
I have a question, I have a HTC S710 running WM6. When I get an SMS
instead of showing the name of the person that sent it, it shows the
number even I have the contact stored. What I figured is that the
stored number is XXX-XXXX and the SMS comes from +506 XXXXXXX.
In other phones Ive had (Nokia, Sony Ericsson) when an SMS comes from
that number, it does associate it with the contact name.
Any ideas on how to get this done on the HTC S710?
Thanks in advance,
Dan
I don't see anything else than modify the whole phonebook and put +506 (or a needed one) at the beginning of all your numbers. Maybe all your phones were able to display correct number, but I'm afraid that WM can't do it
Nokia only compares the last 7 digits from the right.
I think it's also depends on the network you are connected to.
that's what someone told me anyway so don't take my word from it... here we don't have that problem (even if the number is sored without +972 it still show the name of the contact when SMS arrives).
Related
Hi,
I used for a very long time Nokia and SE. Now I switched to HTC. I have an old habit: I often get new phone numbers while I'm speaking. So, On Nokia and SE, I just type in the phone number, close the active call and the new number was sitting on the screen. On WM6, to do this I have to open a note, type in the number and save the note. This is usually hard to be done with one hand. Otherwise, if I type in the number, once the active call is finished, the typed number dissaper.
Of course I can get used with the "note style", but I'm just wondering if the "old" method is not available (changing dialer maybe ...)? Any sugestions ?
TIA,
Bogdan
Hello!
I have quite a strange problem. It appeared after I updated my Polaris to Windows 6.1 and the radio to the newest one. In general, I am really satisfied with the new sys, however there is one problem: telephone calls are not recognized basing on the contact list (which I imported using sprite backup).
It means that even though I have e.g. PersonX with telephone number 1234567 in my contacts, when I receive a call from him there appears the telephone number only (it is not changed into the "PersonX"). Have any of you ever had such a situation? I would be grateful for any suggestions how to solve it...
Best regards,
Theriel
Do You have only one contact with the same number? Not doubled - one in Phonebook and second with the same number on SIM?
Or if you have same contact under different names with the some number two or more times...
Joe Pesci with number +1-555-5555 and
Joe's house with number +1-555-555 and
Pesci, Joe with number +1-555-555
will confuse any mobile phone, and device will write only number. Check toroughly your contacts for duplicate numbers...
Nope, they are not doubled, and there are no contacts on the SIM. There is however another difference that appeared (I do not know if it has anything to do with the problem but...): previously I had all the contacts in the form:
"Johnson, Mike".
Now I have everything in the form "Johnson Mike" - there is no comma. But I am not sure if it tells you anything (maybe just a cosmetic change between roms?)
What is interesting - I can normally call using the contacts list (even from the "Phone" window) - they appear there properly.
Hi all,
I am sure I am not the first one with this problem, but I could not find any posts via the search.
I recently moved to Japan, and of course took my european Touch Pro (GSM/UMTS).
My company provided me a Softbank USIM card (with a low end standard phone which is good for nothing other than making calls).
Of course I put the USIM into my TP, as I can sync my business contacts to it using active sync (which is obvuiously not possible with the low end phone with came with the USIm card).
Now I am facing the problem, that Softbank in Japan seems not to support "+" infront of country code, so if I dial a number sync with international format (e.g. +49 511 7788855), I end up getting some announcement from Softbank, that my call could not be progressed.
After playing around, I found out I need to dial 010 49 511 7788855 to get through.
Of course I have no interest in manually changing all my synced contacts to this format, especially as it will not work as soon as I leave Japan for a business trip.
The next problem is, that for dialing local Japanese numbers (contry code +81), not even the 010 prefix does the trick. In case of local numbers I really have to dial without any country code like:
080 3456789 works
010 81 80 3456789 does not work
+81 80 3456789 does not work
As you can imagine, this situation is everything else but satisfying.
No wI am looking for any kind of propper solution (which does not include entering three different formats of phone numbers for each of my contacts).
I hoped the would be a small program that can automatically replace "+" by "010" and "+81" by "0".
If I rember correctly, I had a similar option in one of my previous HTC phones, but can not rember, which software was offering it, and can not find any similar option in my current TP ROM.
Anyone has an idea how to solve this?
Thanks and regards,
Check under Start > Settings > Phone > Services and see if you have a Plus Code Dialing option. If so, you should be able to choose Get Settings and change the code accordingly.
010 is only for international dialing, so local numbers should be stored as local numbers without "+".
Thanks, but in settings -> phone -> services I only have:
call barring
caller id
call forwarding
call waiting
voice mail and text messages
Regarding local phone numbers:
The problem is, that I sync my phone with our company exchange address book. The phone number format is stadard with +country code local number, I can not change that.
I mean, in Europe it is no problem to dial a number with the country code of the country you are currently in. The call will still get through.
I can not understand why Japan (or at least Softbank) does not support the same.
SoftBank (or other japanese mobile companies) simply DO NOT support this, for the reasons only they know. Its too bad, i am also from europe, and that + dialing is really benri thing. wherever you go, you dail your contacts exactly the same way, but not in japan.
Its plain STUPID if you ask me.
of course it is stupid, but I doubt the japanese mobile phone provider will change it when I complain to them.
It should be easier to find a work around.
As I said, there was an option or software in one of my previous HTC devices, where I could choose to replace + by 00.
That makes me think the + could also be replaced by 010, no?
The solution is called MagiCall.
Works perfectly.
So Ive been using my HTC Ozone (6.5 Standard, 3VO rom) for a while in israel, and the way the cellular network works is as follows:
country code is +972
the number that shows up on an incoming call is 052-555-5555.
The number that shows up on an incoming text is +972-52-555-5555.
The number that shows up on an outgoing call when dialing without the country code (aka 052-555-5555) is +972-052-555-5555.
All of these differences mean that if I have a number saved in the contact manager (in only one of the above forms), it isnt displayed 2/3rds of the time. If i send a text to ME(052-555-5555), the reply comes back from an unsaved number, in a new thread is +972-52-555-5555.
Is there a way for me to just save the base number (052-555-5555), and have the phone's contact manager realize that its the same number is the +92 equivalent? My current workround is saving all the forms of a number to a contact, but 1. its tedium to go through all my contacts and do this, and 2. you can only save so many numbers to a contact, which means im screwed if the contact has two different numbers.
I see all these fields in the "current country" setting, but I have no idea what they mean, or if that is even the solution.
Any help would be greatly appreciated.
hey , i got the same problem on my Omnia 2 with windows mobile version 6.5
The local incoming call won't show the country code, and sms does the opposite way.
check through all my phone setting, can not find any related option for this.
Thanks for anyone can provide a resolution.
i just resolved my problem. hope this way can help you as well.
get a regedit software on your windows mobile phone.
go to HKEY_CURRENT_USER/ControlPanel/Phone
under it, you should able to see a key name "CallIdMatch", change the value to maybe 8 or 9, which means it will match the last 8 or 9 numbers for each incoming call or sms. (use decimal) after the changing, reboot your phone.
Wow, it worked!!
Thanks a lot man!
thanks for the tip jason_ma!
i was also wondering about it.
Anyone know how to edit CalIidMatch an an HTC hero
Hi,
I bought a T-Mobile HTC 8X in the US, unlocked it and brought it back with me to Israel. Now, when Israeli contacts call me, their numbers appear as (for example) 050 555 5555. When they text me, the number shows up as +97250 555 5555. For some reason the phone isn't able to tell that those two are the same number. I couldn't find anything while looking through the settings. I tried playing around with regions and all and came up with nothing. My old AT&T Focus had no issues and my dad's British 8S is working fine as well.
If I remember correctly, In WP7 deivces there's a registry setting which allows to control how many digits from the right identify the number as unique. However, I couldn't find a registry editor for the 8X (is there any?) so that information won't help me right now.
So now, my caller ID function sucks and the only way to actually ID contacts is to save 2 numbers for each one... really frustrating.
Does anyone know how to fix this?
Thanks!
Eyal
HTC support emailed back
And after sending them my IMEI they said that unfortunately there's nothing they can do and T-Mobile phones show that symptom in places like Israel and Europe.
So, it's either selling it on ebay or waiting for a registry editor or flashing it with a new ROM somehow. Option #1 seems like the most realistic one at the moment. This really sux.
Eyal
eyal453 said:
Hi,
I bought a T-Mobile HTC 8X in the US, unlocked it and brought it back with me to Israel. Now, when Israeli contacts call me, their numbers appear as (for example) 050 555 5555. When they text me, the number shows up as +97250 555 5555. For some reason the phone isn't able to tell that those two are the same number. I couldn't find anything while looking through the settings. I tried playing around with regions and all and came up with nothing. My old AT&T Focus had no issues and my dad's British 8S is working fine as well.
If I remember correctly, In WP7 deivces there's a registry setting which allows to control how many digits from the right identify the number as unique. However, I couldn't find a registry editor for the 8X (is there any?) so that information won't help me right now.
So now, my caller ID function sucks and the only way to actually ID contacts is to save 2 numbers for each one... really frustrating.
Does anyone know how to fix this?
Thanks!
Eyal
Click to expand...
Click to collapse
Actually, if I remember correctly from my previous experience with unlocked phones, most true Caller-ID (where the phone can identify who is calling even if they AREN'T in your Contacts list) requires XML code embedded in the phone (somewhere, don't ask me where) by the provider. Some providers use the same frameworks, so it's possible to get it working from network to network, but in most cases no.
I've never seen a situation tho, where it couldn't pick up the name from the Contacts list, based on the number coming in. I seem to remember you can turn on a feature called "International Dialing Help" that might bring them both together. OR put the entire phone number in your contacts. (As it is displayed when it comes in on Text).
drtolson said:
Actually, if I remember correctly from my previous experience with unlocked phones, most true Caller-ID (where the phone can identify who is calling even if they AREN'T in your Contacts list) requires XML code embedded in the phone (somewhere, don't ask me where) by the provider. Some providers use the same frameworks, so it's possible to get it working from network to network, but in most cases no.
I've never seen a situation tho, where it couldn't pick up the name from the Contacts list, based on the number coming in. I seem to remember you can turn on a feature called "International Dialing Help" that might bring them both together. OR put the entire phone number in your contacts. (As it is displayed when it comes in on Text).
Click to expand...
Click to collapse
I tried saving the entire number, but because local Israeli numbers get an extra "0" the phone is not able to ID them. Local call comes in as 050-5555555. SMS, like an intl. call, comes in as +97250-5555555. The "International Dialing Help" really helps when you're dialing. I thought it would fix the caller-id issue but it doesn't.
I spoke with HTC and with WP8 support on twitter. It's a known issue for T-mo phones and according to WP8 support, it has been forwarded to the appropriate team which probably means it'll be fixed in months to come. Until then, the only option is to get the phone flashed by one of the Israeli carriers with the Israeli version of the OS.