Hi,
I used for a very long time Nokia and SE. Now I switched to HTC. I have an old habit: I often get new phone numbers while I'm speaking. So, On Nokia and SE, I just type in the phone number, close the active call and the new number was sitting on the screen. On WM6, to do this I have to open a note, type in the number and save the note. This is usually hard to be done with one hand. Otherwise, if I type in the number, once the active call is finished, the typed number dissaper.
Of course I can get used with the "note style", but I'm just wondering if the "old" method is not available (changing dialer maybe ...)? Any sugestions ?
TIA,
Bogdan
Related
Hi,
in the old (and current I believe as well) Nokia phone - and most other pure mobile phones for that matter - you can dial a "p", typically by holding down the "*" for a while. The "p" makes the phone wait a little while before continuing to dial the rest of the number.
I need this feature!!!
I am using some prepaid phone cards for which this feature is really necessary.
So, anyone have a clue how to get a similar functionality on WM5? The "p" certainly does not work ...
Thanks in advance - Andy
if you're dialing live, you can dial only the connection number then open the keypad to dial the rest of the keycode manually. If you want to automate it, create a contact with the full number and you can enter in "p" there.
I have a contact for my voicemail which dials the voicemail and waits and the pin + #. this works great with voicecommand cause all I have to do is say "call voicemail" and it'll dial, enter in the password automatically and I don't have to touch the phone at all...
Interesting ... I did migrate all my number from my previous phone, where i had the "p" included in the number. The numbers also seemingly came up correctly on the PPC phone. However, when I tried to dial the number, it would not take the complete number with the "p" - I cannot remember exactly what it did, but it did not dial the whole thing. Thats why I thought/ hoped that there is another way. I guess, after what you are saying, I should give it another try ...
And yes, the application that you are describing is very similar to what I want to use. There is a prepaid international call provider, which has a local dial-in number and lets me call abroad for very little money. I call the local number - the service provider recognizes my account by the incoming phone number of my mobile - and then I dial the destination number. For the recognising part however, it is needed that the phone waits a little before it continues to dial the destination number.
Alright, alright .... works! Thx for the assurance! Tried it again and it just takes a lot longer - the pause is longer - than it used to be on my Nokia. Also, I do not hear the dialing tones after the "p" anymore, which probably put me off before.
Thanks! Thread closed
Try replacing the "p" with a "," . It will pause for a few seconds once the other side picks up the phone.
Hi
I have a question, I have a HTC S710 running WM6. When I get an SMS
instead of showing the name of the person that sent it, it shows the
number even I have the contact stored. What I figured is that the
stored number is XXX-XXXX and the SMS comes from +506 XXXXXXX.
In other phones Ive had (Nokia, Sony Ericsson) when an SMS comes from
that number, it does associate it with the contact name.
Any ideas on how to get this done on the HTC S710?
Thanks in advance,
Dan
I don't see anything else than modify the whole phonebook and put +506 (or a needed one) at the beginning of all your numbers. Maybe all your phones were able to display correct number, but I'm afraid that WM can't do it
Nokia only compares the last 7 digits from the right.
I think it's also depends on the network you are connected to.
that's what someone told me anyway so don't take my word from it... here we don't have that problem (even if the number is sored without +972 it still show the name of the contact when SMS arrives).
So Ive been using my HTC Ozone (6.5 Standard, 3VO rom) for a while in israel, and the way the cellular network works is as follows:
country code is +972
the number that shows up on an incoming call is 052-555-5555.
The number that shows up on an incoming text is +972-52-555-5555.
The number that shows up on an outgoing call when dialing without the country code (aka 052-555-5555) is +972-052-555-5555.
All of these differences mean that if I have a number saved in the contact manager (in only one of the above forms), it isnt displayed 2/3rds of the time. If i send a text to ME(052-555-5555), the reply comes back from an unsaved number, in a new thread is +972-52-555-5555.
Is there a way for me to just save the base number (052-555-5555), and have the phone's contact manager realize that its the same number is the +92 equivalent? My current workround is saving all the forms of a number to a contact, but 1. its tedium to go through all my contacts and do this, and 2. you can only save so many numbers to a contact, which means im screwed if the contact has two different numbers.
I see all these fields in the "current country" setting, but I have no idea what they mean, or if that is even the solution.
Any help would be greatly appreciated.
hey , i got the same problem on my Omnia 2 with windows mobile version 6.5
The local incoming call won't show the country code, and sms does the opposite way.
check through all my phone setting, can not find any related option for this.
Thanks for anyone can provide a resolution.
i just resolved my problem. hope this way can help you as well.
get a regedit software on your windows mobile phone.
go to HKEY_CURRENT_USER/ControlPanel/Phone
under it, you should able to see a key name "CallIdMatch", change the value to maybe 8 or 9, which means it will match the last 8 or 9 numbers for each incoming call or sms. (use decimal) after the changing, reboot your phone.
Wow, it worked!!
Thanks a lot man!
thanks for the tip jason_ma!
i was also wondering about it.
Anyone know how to edit CalIidMatch an an HTC hero
I'm not sure this is the right forum, but I can't find anywhere more appropriate...
I have a WinMo 6.1 phone (AT&T Fuze-branded Touch Pro), and I recently discovered Androkkid (http://www.simosoftprojects.com/androkkid.php), and I'm impressed, but I need to figure out how to make a couple of features work before I can be really impressed with it.
At present, I have an icon labelled "Voicemail", which I can set as type "contact" (which means that when I click on it, it dials my voicemail), or as type "voicemail" (which means that it tells me how many voicemails I have waiting for me, but clickin it just takes me to the dialler. I'd really like it if it can display the number of voicemails and automatically dial my voicemail when I click on it. Is there a parameter I can pass into the dialler that will tell it to automatically dial a specific number?
I also have an icon which displays the number of missed calls, and takes me to the dialler; I would like this to instead take me to the call history log.
I'm sure these are trivial problems, but I've been unable to find anything helpful on the Googles. Thanks for your time.
Hi,
I bought a T-Mobile HTC 8X in the US, unlocked it and brought it back with me to Israel. Now, when Israeli contacts call me, their numbers appear as (for example) 050 555 5555. When they text me, the number shows up as +97250 555 5555. For some reason the phone isn't able to tell that those two are the same number. I couldn't find anything while looking through the settings. I tried playing around with regions and all and came up with nothing. My old AT&T Focus had no issues and my dad's British 8S is working fine as well.
If I remember correctly, In WP7 deivces there's a registry setting which allows to control how many digits from the right identify the number as unique. However, I couldn't find a registry editor for the 8X (is there any?) so that information won't help me right now.
So now, my caller ID function sucks and the only way to actually ID contacts is to save 2 numbers for each one... really frustrating.
Does anyone know how to fix this?
Thanks!
Eyal
HTC support emailed back
And after sending them my IMEI they said that unfortunately there's nothing they can do and T-Mobile phones show that symptom in places like Israel and Europe.
So, it's either selling it on ebay or waiting for a registry editor or flashing it with a new ROM somehow. Option #1 seems like the most realistic one at the moment. This really sux.
Eyal
eyal453 said:
Hi,
I bought a T-Mobile HTC 8X in the US, unlocked it and brought it back with me to Israel. Now, when Israeli contacts call me, their numbers appear as (for example) 050 555 5555. When they text me, the number shows up as +97250 555 5555. For some reason the phone isn't able to tell that those two are the same number. I couldn't find anything while looking through the settings. I tried playing around with regions and all and came up with nothing. My old AT&T Focus had no issues and my dad's British 8S is working fine as well.
If I remember correctly, In WP7 deivces there's a registry setting which allows to control how many digits from the right identify the number as unique. However, I couldn't find a registry editor for the 8X (is there any?) so that information won't help me right now.
So now, my caller ID function sucks and the only way to actually ID contacts is to save 2 numbers for each one... really frustrating.
Does anyone know how to fix this?
Thanks!
Eyal
Click to expand...
Click to collapse
Actually, if I remember correctly from my previous experience with unlocked phones, most true Caller-ID (where the phone can identify who is calling even if they AREN'T in your Contacts list) requires XML code embedded in the phone (somewhere, don't ask me where) by the provider. Some providers use the same frameworks, so it's possible to get it working from network to network, but in most cases no.
I've never seen a situation tho, where it couldn't pick up the name from the Contacts list, based on the number coming in. I seem to remember you can turn on a feature called "International Dialing Help" that might bring them both together. OR put the entire phone number in your contacts. (As it is displayed when it comes in on Text).
drtolson said:
Actually, if I remember correctly from my previous experience with unlocked phones, most true Caller-ID (where the phone can identify who is calling even if they AREN'T in your Contacts list) requires XML code embedded in the phone (somewhere, don't ask me where) by the provider. Some providers use the same frameworks, so it's possible to get it working from network to network, but in most cases no.
I've never seen a situation tho, where it couldn't pick up the name from the Contacts list, based on the number coming in. I seem to remember you can turn on a feature called "International Dialing Help" that might bring them both together. OR put the entire phone number in your contacts. (As it is displayed when it comes in on Text).
Click to expand...
Click to collapse
I tried saving the entire number, but because local Israeli numbers get an extra "0" the phone is not able to ID them. Local call comes in as 050-5555555. SMS, like an intl. call, comes in as +97250-5555555. The "International Dialing Help" really helps when you're dialing. I thought it would fix the caller-id issue but it doesn't.
I spoke with HTC and with WP8 support on twitter. It's a known issue for T-mo phones and according to WP8 support, it has been forwarded to the appropriate team which probably means it'll be fixed in months to come. Until then, the only option is to get the phone flashed by one of the Israeli carriers with the Israeli version of the OS.