Update to WM6.1 - Tilt, TyTN II, MDA Vario III Windows Mobile ROM De

Newbie question for Kaiser:
is that possible to flash to WM6.1 latest ROM from this?:
WM6.0Pro version 5.2.1620
ROM: 1.82.721.1 WWE
Radio: 1.27.15.32
Thanks for your help!

no you can't...you have a special version which doesn't allow you to flash to any new rom.
seriously. read around. as long as you are CID unlock and you read instructions, you are fine.

Yes
igkovacs said:
Newbie question for Kaiser:
is that possible to flash to WM6.1 latest ROM from this?:
WM6.0Pro version 5.2.1620
ROM: 1.82.721.1 WWE
Radio: 1.27.15.32
Thanks for your help!
Click to expand...
Click to collapse
Just make sure your phone is CID unlocked first, install HardSPL then you can flash to any ROM on here.
You will also need to flash to a 6.1 compatible radio otherwise you may get no sound.
Good luck.

thomassster said:
no you can't...you have a special version which doesn't allow you to flash to any new rom.
seriously. read around. as long as you are CID unlock and you read instructions, you are fine.
Click to expand...
Click to collapse
OK, thank you! So that means must use all the time the same ROM.
So far I don't have any problem with that.

igkovacs said:
OK, thank you! So that means must use all the time the same ROM.
So far I don't have any problem with that.
Click to expand...
Click to collapse
i guess you can't sense sarcasm on my last post. you can flash any rom you want, as you long as your phone is CID unlock. I'm assuming you haven't flashed any rom yet. Please read everything in the wiki to find out everything about your device. We get a lot of new people here, and we can't have newbies ask such simple questions when you can learn everything by reading the wiki. For my last post, I'm just joking. You can flash a WM6.1, but read the stickies and the wiki first before anything.

Related

After upgrade to TNT 4.0, i still use wm5. Add 1 question.

This is the new question I want to ask. (13 Aug 4.37pm London)
As mentioned in the Wizzard-wiki, there is no free way to unlock G4.
BUT !!!!! today, I just did an update (look at my signature). First of all flash the Radio and ExtRom. Then use aWizzard, enable Rapi (e),
UNLOCK CID (u) and last write new OS (w).
In the Unlock CID phase, I finally get something like "your device is successfully CID unlocked" !!!!!!!!!!!!!!!!!!!!! does this mean that my G4 is unlocked and is it the same as we pay 20 pounds to use IMEI number to lock the CID (as mentioned in wiki)??????????????????????????????
The following is the original post.
I am using a CID locked O2 XDA Mini S. It took me about 6 minute to upgrade to TNT4.0, but after that the device rebooted. And then the old wm5 shows up...... (2.21.4.1)
what's going on here?????????????
Please read the wiki before you ask questions.
jacknjill said:
Please read the wiki before you ask questions.
Click to expand...
Click to collapse
Hey, thanks for the reply. Maybe sorry for this naive question.
But I have been reading the wiki many times. Being a foreigner, I don't quite understand many terms and abbreviations in the wiki. After reading the describtion from the TNT 4.0, i know that it is safe to flash it to my O2 MiniS.
But I still don't know why it doesn't work. Here i want to ask 2 questions.
I have read the "how to flash ANY rom to a CID Locked device". 1 question I want to ask is that Any rom includes a rom like TNT4.0, right? I.E. I can flash TNT to my CID locked O2 MiniS, right?
2nd question is that, I noticed that many posts mentioned that they will need an official rom as the base. Where can I find any Official roms for the MiniS. are the following 3 the ONLY OFFICIAL roms for O2 Mini S? I apprecaite any help. Thank you.
O2 WWE OP ID 1.5.4.02 1.10.00 1.12.10 Download Thread
O2 Launch ROM WWE OP ID 1.5.4.02 1.10.00 1.12.10 Download ?Thread
O2 WWE WWE OP ID 2.21.4 2.21 2.07.10 Download Thread
wildcolor said:
Hey, thanks for the reply. Maybe sorry for this naive question.
But I have been reading the wiki many times. Being a foreigner, I don't quite understand many terms and abbreviations in the wiki. After reading the describtion from the TNT 4.0, i know that it is safe to flash it to my O2 MiniS.
But I still don't know why it doesn't work. Here i want to ask 2 questions.
I have read the "how to flash ANY rom to a CID Locked device". 1 question I want to ask is that Any rom includes a rom like TNT4.0, right? I.E. I can flash TNT to my CID locked O2 MiniS, right?
2nd question is that, I noticed that many posts mentioned that they will need an official rom as the base. Where can I find any Official roms for the MiniS. are the following 3 the ONLY OFFICIAL roms for O2 Mini S? I apprecaite any help. Thank you.
O2 WWE OP ID 1.5.4.02 1.10.00 1.12.10 Download Thread
O2 Launch ROM WWE OP ID 1.5.4.02 1.10.00 1.12.10 Download ?Thread
O2 WWE WWE OP ID 2.21.4 2.21 2.07.10 Download Thread
Click to expand...
Click to collapse
You need to use the shell tool to flash to a G4 CID locked device - follow the instructions.
dleeming said:
You need to use the shell tool to flash to a G4 CID locked device - follow the instructions.
Click to expand...
Click to collapse
Does that mean that I can flash any rom to use the shell tool, like I can flash TNT4.0 or Faria etc. ?
The answer to EVERY Question and problem you are having is:
Unlock CID your device!
For Crist sake!
You CAN NOOOOOOOOOT put any rom in your device until you have done that, and no matter whatever anyone else says , just do it, and your problems will go away...
Some poeple just dont do what the instructions tell you to do, and then fill the forum with repeated issues...
t2t said:
The answer to EVERY Question and problem you are having is:
Unlock CID your device!
For Crist sake!
You CAN NOOOOOOOOOT put any rom in your device until you have done that, and no matter whatever anyone else says , just do it, and your problems will go away...
Some poeple just dont do what the instructions tell you to do, and then fill the forum with repeated issues...
Click to expand...
Click to collapse
Man, you scaried me. But there is a post saying that I can flash any rom without CID Unlock, right? Just don't have money to do the cid unlock.
dleeming is right.
According to your signature you have got a G4 model. Follow the instructions in the stickies about upgrade of a G4 model.....
Huckleberry88 said:
dleeming is right.
According to your signature you have got a G4 model. Follow the instructions in the stickies about upgrade of a G4 model.....
Click to expand...
Click to collapse
Understand.
I just want to make sure that in theory I can flash to any roms according to thread "how to flash any rom with a cid locked"
As most of these ROM do not incl. IPL/SPL or the radio you may want to check whether your IPL/SPL and radio version work with the respective ROMs first.
If I remember correctly they require 2.x or higher IPL/SPL. But, check for yourself.
BTW what kind of Chinese support you are referring to?
The best I've used for Chinese support is CE-star specially made for WM6 release from the ppda forums. Penpower works like the transcriber for Chinese.
Monster Chinese, I have never gotten to work correctly. You can't uninstall it too.
jacknjill said:
The best I've used for Chinese support is CE-star specially made for WM6 release from the ppda forums. Penpower works like the transcriber for Chinese.
Monster Chinese, I have never gotten to work correctly. You can't uninstall it too.
Click to expand...
Click to collapse
thats interesting. What do you mean by "ppda forums"?
Some users seem to have no probs with Monster:
http://forum.xda-developers.com/showthread.php?t=314159&page=2
sorry for the OT...
Huckleberry88 said:
As most of these ROM do not incl. IPL/SPL or the radio you may want to check whether your IPL/SPL and radio version work with the respective ROMs first.
If I remember correctly they require 2.x or higher IPL/SPL. But, check for yourself.
Click to expand...
Click to collapse
Thanks mate. Now I've got my new signature. I can show this off to myself now hahahahaha
I forgot the name of the forum, but you can do a search on Leies edition of CE-star.
Idealy, I want to use the English OS system but with full Chinese support. e.g. I can install Chinese software, browse Chinese web-site etc.
But just now, I flashed a Chinese OS system. Quit happy with it now, though maybe later I will try to find a way to fullfill my ideal system above.
jacknjill said:
I forgot the name of the forum, but you can do a search on Leies edition of CE-star.
Click to expand...
Click to collapse
I see. thanks.
wildcolor said:
Idealy, I want to use the English OS system but with full Chinese support. e.g. I can install Chinese software, browse Chinese web-site etc.
But just now, I flashed a Chinese OS system. Quit happy with it now, though maybe later I will try to find a way to fullfill my ideal system above.
Click to expand...
Click to collapse
If you don't need to enter Chinese characters but just have your Wizard to show them, the easiest way would be to install a cab with the Chinese font set.
The cab is somewhere here on the forum...
Huckleberry88 said:
If you don't need to enter Chinese characters but just have your Wizard to show them, the easiest way would be to install a cab with the Chinese font set.
The cab is somewhere here on the forum...
Click to expand...
Click to collapse
Are you sure? I think this thing works similar as PC. Not only we need the font, but the encoding thing (like uni-code or something). Personally, I don't think your suggestion will work. If you find such thread, please do show it to me. It will be highly appreciated
Cheers
I am using it that way. Haven't check Chinese websites but chinese SMS and the menu of the SIM card are shown in HanZi.
check for the fontpatch.cab
or start here:
http://forum.xda-developers.com/showthread.php?t=237858&page=4&highlight=fontpatch
especially post no. 39
Cheers!

its been a while... But how do u put wm6 on an mda

I have a locked tmobile mda... I forget what I need to do b4 I can flash a new rom... I think all I have to do is CID unlock it right? But I forget how. Any help would be great
why not to read "sticky" threads on the top!!!
cgigate said:
why not to read "sticky" threads on the top!!!
Click to expand...
Click to collapse
Yes the fastest one way to figure this out again is to read the stickies labeled unlocking and UPGRADING. That is usually pretty helpful.
help wanted
dharvey4651 said:
Yes the fastest one way to figure this out again is to read the stickies labeled unlocking and UPGRADING. That is usually pretty helpful.
Click to expand...
Click to collapse
hi ive tryd to up to wm6 but no luck ive read all the info on how to doit downloaded loads of software still no good ive managed to put wizard love rom on it for now but cant get round the cid unlocking then how to up aput wm6 on
ive tryd it but dont want to kill the phone could some one make an ruu of wm6 then upload it or dont it work that way
any help would be great please and thank you
device info
mda vario
rom ver 2.26.10.2 wwe
rom date 6/7/06
radio ver 02.25.11
protocol 4.1.13.12
ext.rom ver 2.26.10.105
i just started going to this forum and I'm just looking for a way to get WM6 on my MDA. I know there are some posts here but I don't understand a lot of this flash rom things? Could someone help me ain directing me to a trustworthy post on how to upload WM6 on my MDA? thanks!
read the stickies...
especially
How to flash a new ROM to your Wizard... a little tutorial!
VWGolf2.OHH said:
i just started going to this forum and I'm just looking for a way to get WM6 on my MDA. I know there are some posts here but I don't understand a lot of this flash rom things? Could someone help me ain directing me to a trustworthy post on how to upload WM6 on my MDA? thanks!
Click to expand...
Click to collapse
Which is your device, a G3 or G4,how come we can tell,untill and unless you do not post the vital data of your phone,no one can suggest you any help without knowing the version of your phone.always post the data.
Well 'trustworthy post on how to upload WM6 on my MDA?',why ?,do you think what all is posted here in this Forum is not Trustworthy.
Very rightly said by moseslin 'Read The Stickies',you'll find all the answers here, just "Help Yourself"
bill4676 said:
hi ive tryd to up to wm6 but no luck ive read all the info on how to doit downloaded loads of software still no good ive managed to put wizard love rom on it for now but cant get round the cid unlocking then how to up aput wm6 on
ive tryd it but dont want to kill the phone could some one make an ruu of wm6 then upload it or dont it work that way
any help would be great please and thank you
device info
mda vario
rom ver 2.26.10.2 wwe
rom date 6/7/06
radio ver 02.25.11
protocol 4.1.13.12
ext.rom ver 2.26.10.105
Click to expand...
Click to collapse
which DOC chip version you got,a G3 or G4 ? to verify post your IPL/SPL...? or download the WST Tool,install and run it and post the report to determine if it's a G3 or G4 device.You can download the WST tool here :-
http://forum.xda-developers.com/showthread.php?t=329170
If it's a G3,it's required to first CID unlock the device and than upgrade to wm6.
How to CID unlock,check this guide here :-
http://forum.xda-developers.com/showthread.php?t=285435
http://forum.xda-developers.com/showthread.php?t=263116
But if a G4,read here how to upgrade :-
http://forum.xda-developers.com/showthread.php?t=329147
Good luck

HardSPL???

Hi all, i got installed HardSPL ver 1.x on my Tilt for use HTC and custom ROMs, but i got a question... what do version 3x of HardSPL? i can flash more ROMs? its better perfomarce 3.x than 1.x? i am a little lost in this aspect
1.x is primarily for the unlocking process, most to ALL Custom roms reccomend 3.29 these days, check with your chef.
Travito said:
1.x is primarily for the unlocking process, most to ALL Custom roms reccomend 3.29 these days, check with your chef.
Click to expand...
Click to collapse
not 3.56? i thought this was the newest and "best"...
I am using 3.56 and all works fine...
Did not noticed any difference between 3.29 and 3.56
3.29 SPL is extracted from the 3.29 Kaiser ROM, which until recently has been the latest official Kaiser ROM. (the 3.34 SPL from the newer 3.34 ROM has not been hacked)
3.56 SPL is extracted from the 3.56 Tilt ROM.
Anyway, you could all find these answers in the sticky SPL threads and not make *another* SPL thread.
"Anyway, you could all find these answers in the sticky SPL threads and not make *another* SPL thread."
Thats why i did this thread xD, i dont find or understand the other one xD thx for the replies, i got HTC WM 6.1 Spanish ROM with the hacked 1.X, so i can safely updated to a 3.x one? Regards!
wolframio74 said:
"Anyway, you could all find these answers in the sticky SPL threads and not make *another* SPL thread."
Thats why i did this thread xD, i dont find or understand the other one xD thx for the replies, i got HTC WM 6.1 Spanish ROM with the hacked 1.X, so i can safely updated to a 3.x one? Regards!
Click to expand...
Click to collapse
But you could post this in the SPL sticky. I believe you understood enough to find it, didn't you.
To be constructive: it is recommended that you update to a 3.x SPL with a WM6.1 ROM.
It's as safe as any other flash, meaning that you can brick your device if you don't now what you're doing, but not more.
wolframio74 said:
"Anyway, you could all find these answers in the sticky SPL threads and not make *another* SPL thread."
Thats why i did this thread xD, i dont find or understand the other one xD thx for the replies, i got HTC WM 6.1 Spanish ROM with the hacked 1.X, so i can safely updated to a 3.x one? Regards!
Click to expand...
Click to collapse
Not comprehending something in another thread is not an allowable reason to create a new thread!
dani31 said:
But you could post this in the SPL sticky. I believe you understood enough to find it, didn't you.
To be constructive: it is recommended that you update to a 3.x SPL with a WM6.1 ROM.
It's as safe as any other flash, meaning that you can brick your device if you don't now what you're doing, but not more.
Click to expand...
Click to collapse
He Sure could have posted in the existing thread to get a clarification. In fact he should.
Thread Closed pursuant to the guidelines set forth in the Kaiser Section Announcement and the Forum Policies.

New to Tilt, coming from Wizard

I just bougth a used ATT Tilt and it's SIM/CID unlocked and has HyperDragon IV installed on it.
My question is, as a noob, on the Tilt, do I flash a new rom as I would do on my Wizard?
When I flash a rom on my Wizard I usally flash the original T-Mobile WN 5.0 rom and then flash a new rom. Does this apply the same for the Tilt?, or is there a diferent procedure.
I usually don't post much here but I read a lot (Wizard Section).
Thanks, for clearing this up for me.
welcome to the Kaiser community!
please look here for how to flash your first ROM:
http://forum.xda-developers.com/showpost.php?p=2498297&postcount=10
or
http://forum.xda-developers.com/showthread.php?t=433835
good luck
Welcome.
Also please take a look at the WIKI as it holds loads of information about Kaiser\Tilt.
mbarvian said:
welcome to the Kaiser community!
please look here for how to flash your first ROM:
http://forum.xda-developers.com/showpost.php?p=2498297&postcount=10
or
http://forum.xda-developers.com/showthread.php?t=433835
good luck
Click to expand...
Click to collapse
Ok, I see. Since it's already SIM/CID Unlocked then I only have to do
"2. Flash the ROM" from the first link you provided? or always do all the steps,
Oh, and thanks for the welcome guys!
Thanks
afoldats said:
Ok, I see. Since it's already SIM/CID Unlocked then I only have to do
"2. Flash the ROM" from the first link you provided? or always do all the steps,
Oh, and thanks for the welcome guys!
Thanks
Click to expand...
Click to collapse
you should never have to do the first step again unless a major rom update (like an official Kaiser Windows Mobile 6.5 version comes out), and the Flashing a radio step is optional, because some radios get better reception/battery life than others. Look here for a list of radios:
http://forum.xda-developers.com/showthread.php?t=393182
mbarvian said:
you should never have to do the first step again unless a major rom update (like an official Kaiser Windows Mobile 6.5 version comes out), and the Flashing a radio step is optional, because some radios get better reception/battery life than others. Look here for a list of radios:
http://forum.xda-developers.com/showthread.php?t=393182
Click to expand...
Click to collapse
Ok thanks, go it. I appreciate you explainig this to me.
Thanks again!
Question answered thread closed.
Please ask any further questions about flashing in mskip's "Flashing" thread.
Thanks
Dave

1.66 rom and goldcard question

Hi, I bought my hd2 and it was with a Greek Rom. I used goldcard (thanks to this forum) and changed to wwe. If I now want to upgrade rom to 1.66 or any new release will I be able to download normally or I will have to use goldcard every time to upgrade roms?
Thanks
olympiacos said:
Hi, I bought my hd2 and it was with a Greek Rom. I used goldcard (thanks to this forum) and changed to wwe. If I now want to upgrade rom to 1.66 or any new release will I be able to download normally or I will have to use goldcard every time to upgrade roms?
Thanks
Click to expand...
Click to collapse
As the Goldcard is a "temporary" solution which does not change the SPL on your phone (as HSPL would do), you have to use your Goldcard every time you want to flash an "official" ROM.
For further information, I do recommend the stickies here in the ROM forum.
thanks for the reply, what's HSPL ?
thanks for the reply, what's HSPL ?
olympiacos said:
thanks for the reply, what's HSPL ?
Click to expand...
Click to collapse
tictac0566 said:
For further information, I do recommend the stickies here in the ROM forum.
Click to expand...
Click to collapse
Stickies are there for a reason.

Categories

Resources