I have O2 Exec and i want to flash the original ROM Upgrade (Xda_Exec_Upgrade_v1.30.162).
but i want to replace the original extended rom with jasjar oem extended rom????????????
i try to make this many times but its not work
can any one here tell me how can i do this???????
how can i make my owen extended rom???????
aa_talaat_aa said:
I have O2 Exec and i want to flash the original ROM Upgrade (Xda_Exec_Upgrade_v1.30.162).
but i want to replace the original extended rom with jasjar oem extended rom????????????
i try to make this many times but its not work
can any one here tell me how can i do this???????
how can i make my owen extended rom???????
Click to expand...
Click to collapse
hi
You need to break the rom image down.
When you run the upgrade, it will extract files to your temporary location, browse to this folder and you will find the romupgrade utility as well as the nk.nbf and ms.nbf. Replace the ms.nbf with the extended rom version that you wish to use in this temp directory and then continue the flash process.
If you are unable to find the temp location that the files textract too, then simply flash the original rom, then reboot the device, enter back into bootloader and flash only the extended rom that you wish to use.
Cheers,
Beatsy
Dear Beatsy
beast0898 said:
hi
You need to break the rom image down.
When you run the upgrade, it will extract files to your temporary location, browse to this folder and you will find the romupgrade utility as well as the nk.nbf and ms.nbf. Replace the ms.nbf with the extended rom version that you wish to use in this temp directory and then continue the flash process.
If you are unable to find the temp location that the files textract too, then simply flash the original rom, then reboot the device, enter back into bootloader and flash only the extended rom that you wish to use.
Cheers,
Beatsy
Click to expand...
Click to collapse
really i'm trying to do this many times, and every thing go ok at first,
but when i finish upgrade and when extended rom auto run,
suddenly every thing stop and finally i have new rom with empty extended rom .
really i dont know what happend
if this because my device is g4 and the outher ex, rom is g3?????
i dont know.
your problem not with ex rom but the problem with what rom you are use is it have ex rom open or not open if has open ex rom you can do you want if not have open ex rom you cant
aa_talaat_aa said:
really i'm trying to do this many times, and every thing go ok at first,
but when i finish upgrade and when extended rom auto run,
suddenly every thing stop and finally i have new rom with empty extended rom .
really i dont know what happend
if this because my device is g4 and the outher ex, rom is g3?????
i dont know.
Click to expand...
Click to collapse
PM me a link where I can download the extended rom file that you are trying to flash, I will have a look at it, and email/upload back to you if any fixes are required.
Cheers,
Beasty
beast0898 said:
PM me a link where I can download the extended rom file that you are trying to flash, I will have a look at it, and email/upload back to you if any fixes are required.
Cheers,
Beasty
Click to expand...
Click to collapse
i am looking for WM6 for either O2 XDA EXEC or imate JasJar, can anyone help me locating a site to download the Rom.
Related
hello
i have a big storage after i burn the rom without the extended
is there is a way to return to the original extended
does if i install new rom on it it will be back to the smaller extended ??
please help me
40 people view my messege and not even 1 reply -((
thanks for all the good people here that want to help me
Come on. Your posting isn't 24 hours old.....
You can install the programs of the extended ROM manually or you have to reflash your device again with the ROM without the BigStorage hack.
As much as i know, there is no other solution....
Stefan
If you do a "normal" update, i.e. start an "official", unmodified ROM-update program that also includes an Extended ROM, you will get this Extended ROM installed as well.
The question is - why do you want an Extended ROM ?
Do you want to sell/give away your device ?
Otherwise you can install the .CAB files that usually are in the Extended ROM also by copying them from the PC via ActiveSync to your device. They are probably available on the FTP Server here (did not check it though).
Hello,
Is it possibly to add one or 2 cabs to stock kaiser rom? My plan is to add remotetracker to my rom and leave the rest as is (including the spl if possible). This way I am always protected by remotetracker and sending back my device to htc for repairs (if that would be necessary) won't give trouble
Thanks in advance, peterrus
peterrus said:
Hello,
Is it possibly to add one or 2 cabs to stock kaiser rom? My plan is to add remotetracker to my rom and leave the rest as is (including the spl if possible). This way I am always protected by remotetracker and sending back my device to htc for repairs (if that would be necessary) won't give trouble
Thanks in advance, peterrus
Click to expand...
Click to collapse
Blure question as if you cook this in you have a custom rom even using the stock so warranty is broken if you send it in for repairs. Other than that its just to make a package out of the cab isnt it?
Well, maybe HTC doesn't notice the device doesn't run a original ROM. Well I can make an OEM package, but I want to include it in the stock ROM. When I use a kitchen I get all kinds of stripped baseroms, which is something I rather not want.
peterrus said:
Well, maybe HTC doesn't notice the device doesn't run a original ROM. Well I can make an OEM package, but I want to include it in the stock ROM. When I use a kitchen I get all kinds of stripped baseroms, which is something I rather not want.
Click to expand...
Click to collapse
You are kidding right? What do you exactly want here? Do you want it to be like if someone stole youre phone and perform a hard reset that the program is automaticly installed and you can trace it? Or just want to have the program installed if YOU hard reset? Or.. Just have the program installed..
wut
What I really want to know is: Can I add one or 2 files to a stock rom, repack it, and flash it.
peterrus said:
What I really want to know is: Can I add one or 2 files to a stock rom, repack it, and flash it.
Click to expand...
Click to collapse
Yes in diffrent set of ways, you can use package tools on the given cab to make a package to brew in or use XML whit a config operator and have the cab in ROM. There are other ways aswell, it depends on the ROM you are using and the prefered way you want todo this. Idk wich one I would recomend for you.. By making a package you can end up having trouble whit the cab, seting up operator you need to dig in a bit to learn. Read up on packages and search on config_operator setups and you will get there
Thanks, will do.
HTC Snap:
ROM: 2.03.405.2
Radio: 3.47.25.29
Windows Mobile Standard (Build 5.2.21854)
http://rapidshare.com/files/2919947...igned_MAPLE_61.36t.25.29H_3.47.25.29_Ship.exe
Have fun!
For those stuck in Tricolour boot loader:
Original post: http://forum.xda-developers.com/showpost.php?p=4872255&postcount=78
Solution is as folllows
1. Downloaded rom from above (or other source if dont have a serial number to DL from HTC - although the serial number is a good check for the correct rom)
2. Run RUU_Captain_S_HTC_WWE_2.03.405.2_Radio_Signed_MAPL E_61.36t.25.29H_3.47.25.29_Ship.exe
3. Select Next so that package extracts
4. Select Start | Run | and type %TEMP%, and hit enter to open temp folder
5. Sort explorer by Date so that newest date at top
6. Locate the newest folder (eg just created), should be something like pftXXXX.tmp
7. Double click to open
8. Rename RUU_signed.NBH to MAPLIMG.nbh
9. Copy to a FAT32 microsd
10. Insert SD into handset and power on (remove battery an reinsert if required).
11. Screen will initially display tri-colour, then change to grey screen with loading
12. Screen will then show progress as initial components flashed
13. Phone will reboot at about 10% - DONT PANIC - Let phone boot to Tri-Colour, then into grey screen
14. Leave for a few minutes, loader will confirm initial components flashed ok, then continue to flash OS image
15. Once complete (progress bar reaches 100% and displays complete (or something similar)
16. Remove battery
17. Remove MicroSD
18. Reinstall battery, and power on phone
19. WM6.5 initial setup will begin, and phone should be all happy now!!
20. Ensure you rename or delete MAPLIMG.nbh from SD before reinstalling into phone.
21. Flash HardSPL!!!!!
22. Flash custom rom of your choice (ookba's look pretty good to me!!!).
Will this work on any European Snap? Downloading it now...
would this work with my x1
bad file
tried several times to use this..stops at 21% each time. downloaded a couple times thinking it might have been a bad file..in any case. doesn't work. fortunatley was able to flash stock image after
Whether it can provide the parameters of ROM production orders and related software.
Intentionally ask. Thanks.
I know it says "Maple", but does it work on the Ozone (Cedar)?
jonwold said:
tried several times to use this..stops at 21% each time. downloaded a couple times thinking it might have been a bad file..in any case. doesn't work. fortunatley was able to flash stock image after
Click to expand...
Click to collapse
sorry I don't undestand. you download the ROM and it doesn't work?
Is this the official HTC Snap ROM upgrade for certain? No Hard-SPL needed?
And which country is this for?
Same here on a MAPL100. 23% and freezes.
netnut said:
Same here on a MAPL100. 23% and freezes.
Click to expand...
Click to collapse
doesn't work?
The flash does not work on MY MAPL100. The flash freezes and then walks you through recovery, which fails.
I was able to flash back to the 1.17.531.6.
Genna77 said:
doesn't work?
Click to expand...
Click to collapse
23% != 100%
Therefore <FLASH> Failed
well, after reading through the thread I feel it's necessary to give a big
FACE = PALM
to all contributers
obededom said:
well, after reading through the thread I feel it's necessary to give a big
FACE = PALM
to all contributers
Click to expand...
Click to collapse
explain face - palm
Looks like it's designed for a European SNAP S521 (MAPL110). If the ROM doesn't see that CID, it will fail. To install it on a different Maple device, you need HardSPL or a Goldcard from QMAT.
wm 6.5
can someone post this another way i could download it instead of rapidshare my computer wont let me download from rapidshare
udK said:
HTC Snap:
ROM: 2.03.405.2
Radio: 3.47.25.29
Windows Mobile Standard (Build 5.2.21854)
http://rapidshare.com/files/2919947...igned_MAPLE_61.36t.25.29H_3.47.25.29_Ship.exe
Have fun!
Click to expand...
Click to collapse
ikando2on2 said:
can someone post this another way i could download it instead of rapidshare my computer wont let me download from rapidshare
Click to expand...
Click to collapse
No becuase it does not work. WHo uploaded this and why does it not work? Mine is CID unlocked, app unlocked, etc.
Failed at 23%
ookba said:
Looks like it's designed for a European SNAP S521 (MAPL110). If the ROM doesn't see that CID, it will fail. To install it on a different Maple device, you need HardSPL or a Goldcard from QMAT.
Click to expand...
Click to collapse
I buy my device in an european country and it's not branded that means I can use the ROM uploaded here?
thx
jonwold said:
explain face - palm
Click to expand...
Click to collapse
the specifics of where, what and why all the errors were a bit frustrating
but, alas...some clarity
ookba said:
Looks like it's designed for a European SNAP S521 (MAPL110). If the ROM doesn't see that CID, it will fail. To install it on a different Maple device, you need HardSPL or a Goldcard from QMAT.
Click to expand...
Click to collapse
obededom said:
the specifics of where, what and why all the errors were a bit frustrating
but, alas...some clarity
Click to expand...
Click to collapse
More than that, it looks like it's still not an official release. Hence, why we don't see it on HTC's website yet. I managed to cook from it and testing now. Core feels snappy and solid so far. Flashed the new radio and will be testing reception as well.
Hi!
I recently installed the wm6.5 cotulla's rom for 64mb devices in my htc magician. But after give it a try, I want to downgrade to the original rom. But, when I try to downgrade to this rom "OS 1.12.03 / ExtROM 1.12.159 / Radio 1.12" (The last official ROM in spanish) I cant do this because it says: Error of ID of country.
Someone knows how to fix that?
larstnt said:
Hi!
I recently installed the wm6.5 cotulla's rom for 64mb devices in my htc magician. But after give it a try, I want to downgrade to the original rom. But, when I try to downgrade to this rom "OS 1.12.03 / ExtROM 1.12.159 / Radio 1.12" (The last official ROM in spanish) I cant do this because it says: Error of ID of country.
Someone knows how to fix that?
Click to expand...
Click to collapse
Must replace ROMUpgradeUt.exe to MaUpgradeUt_noID.exe
This same problem
I have got this same problem. *.exe file was replaced.
don't worry worry i'll help you.
but before we start, can you still go to the boatloader.? if you do then here we go.
extract the files inside your spanish rom.
it its the original rom, you should have these files:
check link: h--p://pdamobiz.com/forum/uploads/image2/CEZFF_1.gif
then, open or run "RomUpdateUT.exe"
don't press next yet.!
download these file h--p://files.pdamobiz.com/ROMs/XDA/Magician/MaUpgradeUt_noID.exe and save it on where you extracted your original rom, it should look like this:
check link: h--p://pdamobiz.com/forum/uploads/image2/5EFAZ_2.gif
now open and run MaUpgradeUt_noID.exe
now you can press the next button and follow the instruction properly.
h--p://pdamobiz.com/forum/uploads/image2/E7661_u02.jpg
h--p://pdamobiz.com/forum/uploads/image2/52E61_u03.jpg
h--p://pdamobiz.com/forum/uploads/image2/2FE8E_u04.jpg
h--p://pdamobiz.com/forum/uploads/image2/Z47E6_u05.jp
h--p://pdamobiz.com/forum/uploads/image2/84D35_u08.jpg
by the way make sure that you're battery has enough charge, and also check your rom if its not corrupted.
credits to:
ruchonburi of pdamobiz.com
i've done this when i tried Cotulla's latest rom, and it prove to me that downgrading was easy as long as you have the original rom.
i hope it helps.
after i flashed my rom([htc wizard]cingular8125) to haseeb wm6.5 the wi-fi doesn't work anymore(in the comm manager you cannot turn on the switch for wi-fi). which one is wrong? can someone give me a direct link for a good rom? or somthng that can bring back it's WLAN connection. thanks in advance!..
Just a guess ...
/windows/wifiinit.exe ... copy a link to /windows/startup?
Search haseeb's thread to see if anyone complained about wifi, and what suggestions were made.
whew thanks!
i think i'll just reflash it with ham3r's rom. i hope this will do better..
downloading.....
If that also gives you problems, please let us know. Someone else is reporting wifi problems with Ham3r's 6.1 ROM, but it works well for me.
freaked out!
i just finished downloading one of your threads, both the radio and the rom in ham3r's wm6.1.
but..
when i unzip the file (HTC_Wizard_61_21042_WWE_H3r5_b)?
it requires me to enter the password for encypted file nk.nbf..
what should i do?
am new to upgrading roms.. the only thing i'm familiar with is flashing
cotulla's work on my magician.
pls help.. thanks!!
Ham3r is the password
Sent from my Full Android on Vogue using XDA App
finally,i already unzipped (HTC_Wizard_61_21042_WWE_H3r5_b)..
[thanks for the pass]
last questions before flashing...
*do i have to rename the nk.nbf(os) and nk.nbf(radio) before running RUU?
*i already have the RUU(rom update utility) and already unzipped.
should i just paste both .nbf files in the folder before running RUU.exe?
*how am i going to use both .nbf files to flash my rom?
*do i need to downgrade first to its original rom before flashing ham3r's wm6.1 from haseeb's wm6.5?
i have everything in place.. just teach me how the installation works..
thanks..
dont need to rename, just put one in RUU folder, flash it, put the other in RUU folder, flash it too. Really, this information is in the stick threads named something like "read first" or "how to flash"
thanks!!!
thank you very much i finally flashed my wizard with ease with your help..
i flashed it first with its original rom so errors can prevent..
then flashed it with ham3r's rom..
cross fingers!!,, then here you go..
everything works good..
boot time fast..
signal strong..
wi-fi switch not greyed out..
pre-installed programs and apps ( thumbs up!)
thanks!