Majority here seems using a Tilt , though plenty of us have a TyTn II with different keyboard layout and buttons.
(the fn -space/fn-wifi and fn-mydoc are placed differently)
The Tilt keyboard fix is not compliant in layout with the Tytn II and this fix is a must have for many using cooked ROM's from any great Chef here.
I am not geek enough to play around rebuilding the TILT keyboard fix to a Tytn II layout, so maybe someone here could do the community a favor?
Thanks upfront!
(And not not start bashing if I did missed the solution somewhere. )
ok.. so u understand that the keyboard layout is different on the tytn ii and the tilt.. WWE roms come with the tytn II layout.. so on tilt's the symbols would be messed up a bit, so the fix is needed to get the keyboards to the tilt layout.
Unless you flashed a AT&T rom, the keyboard should be natively layed out for your tytn II. IF you installed the titl keyboard fix then you have changed your layout to the tilt's...
If your having problems with your layout install schaps advanced config tool and you can easily change the layout to which ever one you desire.
i see from your sig that you are using alex's rom......didnt you see a tytn ii keyboard fix in alex's rom wiki?
I am using HTC TyTn II
Now I am using Dutty's WM6.1 rom
Fn + A should be "Tab" in my keyboard, but now it's _
Fn + S should be "_" , but now it's "
Is there any fix for this ?
You don't by any chance have the Arabic keyboard as seen here, do you? It's the only one on that page that has Fn + A = "Tab" and Fn + S = "_". Maybe you could try to change your keyboard layout to one of the Arabic layouts. Here are the instructions.
Audiocracy said:
It's the only one on that page that has Fn + A =
Click to expand...
Click to collapse
I have a Taiwan version that also has Fn + A = Tab
I use the TAB key so rarely that it's not a big issue for me.
XtreMe_G said:
i see from your sig that you are using alex's rom......didnt you see a tytn ii keyboard fix in alex's rom wiki?
Click to expand...
Click to collapse
No, and THAT is indeed the issue.... our chefs are either cooking Tilt or Tytn II Roms, though when you want to use a Tilt rom (as Alex V5.2) on a Tytn II, the keyboard settings become scrambled. vice-versa I guess also
So, a Tytn II keyboard fix, which can be used with a TILT ROM would be the solution for a lot of us.
Alex advised me to use the Tilt fix as there is no Tytn II keypboard fix made yet
I am putting 50 USD aside for the one who comes up with a TytnII keyboard fix cab.
starmada said:
I am using HTC TyTn II
Now I am using Dutty's WM6.1 rom
Fn + A should be "Tab" in my keyboard, but now it's _
Fn + S should be "_" , but now it's "
Is there any fix for this ?
Click to expand...
Click to collapse
If Dutty's 6.1 is made for a Tilt, you just wait for the same fix as some of us need
did you check the wiki they have a tilt fix and at tytn fix
http://wiki.xda-developers.com/index.php?pagename=HTC_Kaiser
sd73ta said:
did you check the wiki they have a tilt fix and at tytn fix
http://wiki.xda-developers.com/index.php?pagename=HTC_Kaiser
Click to expand...
Click to collapse
I first thought that this was indeed the solution... though in vain..
EDIT: Tested the Tytn II keyboard fix for ATT roms as identified on the Wiki by sd73ta , though the keyboard settings are still wrongly linked. I do not see a difference between the TytnII and Tilt keyboard fix anyway?
So, good advice, but still not solved
ONE and ONLY solution = Reg setting change !
Thanks to a helpfull member, the solution is as follows:
To fix this problem I needed to change the registry value of HKLM>HARDWARE>DEVICEMAP>KEYBD>CWSLayout from 1 to 0
+ soft reset
As such, a TytnII correct keyboard mapping works with a Tilt based ROM !!!
Case closed
Advice to include this in the WIKI?
ceevee369 said:
Thanks to a helpfull member, the solution is as follows:
To fix this problem I needed to change the registry value of HKLM>HARDWARE>DEVICEMAP>KEYBD>CWSLayout from 1 to 0
+ soft reset
As such, a TytnII correct keyboard mapping works with a Tilt based ROM !!!
Case closed
Advice to include this in the WIKI?
Click to expand...
Click to collapse
Still having one problem: they layout works 99% fine. Just one big loss, the Fn+Space key combination doesn't toggle through different characters as it is supposed to do (i.e, from a to á,à,...) based on what is in the sym.0409.txt file in \Windows. Big issue for those of us who use accents.
There has to be a different layout for this one... Any ideas?
santiargy said:
Still having one problem: they layout works 99% fine. Just one big loss, the Fn+Space key combination doesn't toggle through different characters as it is supposed to do (i.e, from a to á,à,...) based on what is in the sym.0409.txt file in \Windows. Big issue for those of us who use accents.
There has to be a different layout for this one... Any ideas?
Click to expand...
Click to collapse
I have the same problem with a new Dutty Rom. Is there a solution for this problem in the meantime?
Special2k3
Special2k3 said:
I have the same problem with a new Dutty Rom. Is there a solution for this problem in the meantime?
Special2k3
Click to expand...
Click to collapse
try to look for a symbolpad cab and see if there are some registry stuff you need to put in.
also...this thread sounds like it should belong in the other forum.
Hello,
there is already a symbolpad in Duttys Rom. I also tried to install a symbolpad again but i had no luck. There are still no accents letter with Space + FN.
Special2k3
For those who still has the "FN + Space for accents" Problem, the solution can be found in http://forum.xda-developers.com/showthread.php?t=394857, post #9 (by Macsek).
This issue happens because XT9 is enabled, so, the only thing you have to do in order to get symbols back by pressing <FN> + <Space> is the following:
"
...
With XT9 Enabled I Had:
[HKEY_LOCAL_MACHINE\System\CurrentControlSet\Contro l\Layouts\e0010409]
"Ime File"="\windows\eT9Ime.dll"
"Layout Text"="eT9 IME"
With XT9 Disabled I Now Have:
[HKEY_LOCAL_MACHINE\System\CurrentControlSet\Contro l\Layouts\e0010409]
"Ime File"="\windows\compime.dll"
"Layout Text"="COMP IME"
*The last 3 digits of the registry key (ie 409) may vary depending on the language code used.
...".
Related
Hi
There's a couple different HTC Touch keyboard/keypad .cabs floating about, but so far none with full support for my own language (Norwegian). I am a total newb when it comes to making cabs, but since there's already cabs out there with other linguas I can hardly believe it will be very difficult to make a cab with a few spesific languages.
So, here's deal. I will paypal this awesome bounty of 15$ aka "beer money" (not much but I'm unemployed, broke, my fiancé of 8 years and I just decided we'll go separate ways AND I'm horribly bored ) to the person who can make a .cab that installs the HTC Touch keyboard/keypad + English and Norwegian xt9 (additional languages might be an idea, but moderation please if you're really feeling like making a killer cab, size matters too) and so forth and makes it work on a Kaiser.
I will of course expect this .cab to be offered to the public through these forums.
You can find the dumped? files here that's needed (or so I believe).
www.mindovermadness.org/HTC_KeyBoard_DualOEM_multi.rar
Also, the .cab on Duttys FTP with the HTC Touch Keyboard that should be possible to break down for paths etc.
http://www.cinetsystems.com/xda/Kaiser Cab Collections/HTC Touch Keyboard + Keypad.cab
I hope someone will be so kind as to look into this and become my personal XDA hero. Also I am sorry if I somehow have misunderstood the concept of a bounty, offended anyone or offered a ridicilously low sum of money. I come from a land of ice and snow, my brain is numb and thats my excuse!
/Mac
I have tried to do fix that, I got a oem package with the norwegian files, even the scandinavian layout is in it.
But I have had no success, im no coder
But I upped the package, and if any guru will look into it, that would help alot
It must be pretty basic stuff, I figured I can make it work myself simply by some creative renaming and overwriting files on a previous install from one of the existing cabs, but its hardly viable when you flash your phone every week
Think I did it
I have managed to make an installable cab with english, danish, norwegian and swedish HTC Keyboard + Keypad layout, and with working xt9/t9 dictionaries. I have installed it on my own HTC Touch (P3450) and tested all four languages with success. When nordic languages are chosen, the keyboard (not keypad) have the nordic letters on them, so the bitmap files should be right as well.
OJ
Thank you If you want the bounty, pm me your paypal!
nice work, thx
one thing or two though
keypad dont display æøå but keyboard is workin perfectly
i dunno how to explain this correctly, but in textwriting æøå works (in keyboard) but when opening them ouside like in.ex programs folder, it show only english qwerty, any suggestions?
Many has been waiting for this, great work
I've discovered a number of bugs/glitches in this .cab, see the thread at
http://forum.smartmobil.no/viewtopic.php?f=79&t=9314&sid=20a938d71af92d67e43f1ac3be4242cb
Yet, should be "fixeable" I think.
if u install this over another version, it works better
tytn 2 with scandin keyboard
I havent found a solution to my problem.
Keyboard has ä (FN + L) and ö (FN + o).
I updated Rom to Schap's WM6 Pro 4.31 ROMs WWE and then ä and ö keys stopped working! help
itje said:
if u install this over another version, it works better
Click to expand...
Click to collapse
Kan du forklare hva du mener?
Can you explain what you ment by this?
Thanks!
I had posted these cabs for someone else who had wanted them in a previous post.**both cabs must be installed to the device** hope this is what your looking for.
KDKobes said:
I had posted these cabs for someone else who had wanted them in a previous post.**both cabs must be installed to the device** hope this is what your looking for.
Click to expand...
Click to collapse
Thanks!
I've been looking for sometihng like this ever since I tried Duttys great new rom. I'll give them a try next week, when I get my hands on my frends TyTN II, and report back.
Thanks a lot!!
Swedish keyboard
This is what i use for my Tytn .
and also the tilt keybord fix.
KDKobes said:
I had posted these cabs for someone else who had wanted them in a previous post.**both cabs must be installed to the device** hope this is what your looking for.
Click to expand...
Click to collapse
When i download that will my 16 work ok, but i have usede some cab's before but when my hardware keyboard on my dual write letters wrong when i press 2 i got e not a
KDKobes said:
I had posted these cabs for someone else who had wanted them in a previous post.**both cabs must be installed to the device** hope this is what your looking for.
Click to expand...
Click to collapse
Thanks a lot! I'm close to 100% on the keyboard issue.
Ok, this is what I've done:
Installed (in this order)
Scandanavian Keyboard.CAB
-Soft reset
Nordic Keypad Mapping.cab
-Soft reset
XDA_JCEspi2005_Norwegian_Input_Kaiser.cab
-Soft reset
Now the SIP keyboard layout are OK with æøå - working fine. I Had to install XDA_JCEspi2005_Norwegian_Input_Kaiser.cab to get my hardware keyboard right.
This issue remains: Word Completion is still in english. Any fix for that?
Also in Duttys newest ROM, the Touch Keyboard and Touch Keypad are without the Norwegian letters. Any cabs for this?
The Dr.
If you can go with the diamond keyboard try this
http://forum.xda-developers.com/showthread.php?t=392197
jobber endnå med at få keypad at fungera
Try this: Change Curlang to 414 (414 Hex, 1044 Dec). Search up Curlang in youre register (should be in: HKLM/Hardware/Devicemap/Keybd), Soft Reset. DONE! Youre Keyboard is now supporting ÆØÅ and all the oter keys and so on, just as you were use to on Norwegian Shipped/Stok Roms.
Thanks to you both!
I'll try this as soon as I get my hands on my "test Kaiser" again!
I'll report back.
raiisak said:
Try this: Change Curlang to 414 (414 Hex, 1044 Dec). Search up Curlang in youre register (should be in: HKLM/Hardware/Devicemap/Keybd), Soft Reset. DONE! Youre Keyboard is now supporting ÆØÅ and all the oter keys and so on, just as you were use to on Norwegian Shipped/Stok Roms.
Click to expand...
Click to collapse
I have just flashed Duttys May 22 ROM, and no ÆØÅ on the software keyboard. Any fix for this? (Will also post this in Duttys new thread)
Your reg hack worked, the HW keyboard is now norwegian
Thanks!
French keyboard
I search the version with the french keyboard.
Does somebody know a downloadlink?
That would be nice
Thank you for your helping hand in advance
Hi,
I've flashed to windows mobile 6.1 and am stuck with a QWERTY keyboard layout. How can I switch it to an AZERTY ? I've added the Local string that works for WM6 but it doesn't seem to in WM6.1. Any ideas or tricks I may have missed out whilst searching ?
Regards,
Axet
Hi !
I'm using schap's Advanced Configuration Tool to do it:
http://forum.xda-developers.com/showthread.php?t=359380
Bye
Just tried and it didn't work. Are you certain that you are using a WM 6.1 rom and not a WM6 rom ?
I install this soft too :
http://forum.xda-developers.com/showthread.php?t=345426
I'm using ROM 6.03 with Radio 1.64 and it works !!
Tried that too but it hasn't worked (yes, I have performed a soft reset on the phone after installing). My phone is running WM6.1, CE OS 5.2.19170 (Build 19170.1.0.0). I installed Sleuth's WWE 3.0 ROM.
Well, i am french too, and i have a kaiser too and i can assure you that the cabs inside the thread listed above are indeed working with the rom, Sleuth 3.0, installed on my device.
I think you're in for a hard-reset.
Hi,
I am also looking for the azerty hardward keyboard, thus french, but well the Belgian French Azerty keyboard... Can anyone help me with that ?
I am using Dutty's DualTouch V4 RTM...
Thanks in advance...
It's buried somewhere in the following thread: http://forum.xda-developers.com/showthread.php?t=365066
Check out the posts from the last 4-5 days, it should be in there somewhere but can't locate it directly. The post contains the registry keys that you need to change. Good luck!
Here is what I found on the topic you gave me the link :
- HKCU\keyboard layout\Preload
Default = e001040c
- HKCU\keyboard layout\Preload\1
Default = e001040c
- HKLM\HARDWARE\DEVICEMAP\KEYBD
CurLang = 1036
- HKLM\System\CurrentControlSet\Control\Keyboard Layout
Active = 0000040c
Worked fine for me. Thanks
mhhh I've noticed one problem with this fix, I can no longer use the "fn + space" combination to add accents to differents characters
Axet said:
mhhh I've noticed one problem with this fix, I can no longer use the "fn + space" combination to add accents to differents characters
Click to expand...
Click to collapse
I have the same issue :-(
Changed registery settings as indicated. Now nothing works (not a single button). Even the red and green buttons. Help
perform a hard reset to get back to how it was before.
anyone know how to fix the "fn + space" combination ?
Axet said:
Here is what I found on the topic you gave me the link :
- HKCU\keyboard layout\Preload
Default = e001040c
- HKCU\keyboard layout\Preload\1
Default = e001040c
- HKLM\HARDWARE\DEVICEMAP\KEYBD
CurLang = 1036
- HKLM\System\CurrentControlSet\Control\Keyboard Layout
Active = 0000040c
Worked fine for me. Thanks
Click to expand...
Click to collapse
This one for the Kaiser
- HKLM\HARDWARE\DEVICEMAP\KEYBD
CurLang = 1036
...(Shap's Advanced Config 2.1 XML will permit to do easily the trick)
I have performed all the registery changes listed above this post and now have an AZERTY layout but the "fn+space" combination is now broken.
anyone have an idea ?
Strange Behavior
When i did the changes in the registry mentioned above, all he keys were desactivated. I double checked if i had done anything wrong. I reverted back to the old keys. Now I am still stuck with a qwerty layout on an azerty kyb. The advanced config tool had no effect. I set it to french but nothing changed. I have the Dutty's Hybrid Rom[DualTouch v4].
Thanx a million for your input guys. You are the best.
Greetings from Paris
divine_engineer said:
When i did the changes in the registry mentioned above, all he keys were desactivated. I double checked if i had done anything wrong. I reverted back to the old keys. Now I am still stuck with a qwerty layout on an azerty kyb. The advanced config tool had no effect. I set it to french but nothing changed. I have the Dutty's Hybrid Rom[DualTouch v4].
Thanx a million for your input guys. You are the best.
Greetings from Paris
Click to expand...
Click to collapse
This one for the Kaiser
- HKLM\HARDWARE\DEVICEMAP\KEYBD
CurLang = 1036
+soft reset.
As said, you can customize the Shap's 2.1 XML to permit modifying this options (Shap's standard DON'T do the trick on kaizer!)
Axet said:
I have performed all the registery changes listed above this post and now have an AZERTY layout but the "fn+space" combination is now broken.
Click to expand...
Click to collapse
Anyone ?
Hi,
I recently upgrage my TyTN II (originally a Orange Swiss ROM) with the new 6.1 upgrade.
With the previous official WM 6.0 Rom, I had to tweak the registry to have my QWERTZ keyboard working with the following key :
[HKEY_LOCAL_MACHINE\HARDWARE\DEVICEMAP\KEYBD], layout key to 0407
With this new 6.1 ROM, I can't find this key anymore and Kaiser Tweaks or Schaps advanced config can't change it either.
Anyone to change my keyboard to QWERTZ with WM 6.1 ? Thanks a lot that would be much appreciated !
I also have this problem and it bugs me quite a lot...
I now have the official 6.1 english update setuped, and I found no way to set the keyboard layout back to qwertz.
I tried to toy as suggested with HKCU\Keyboard layout\preload\ but it completely crashed the keyboard ;-/
The key seems to be here in 6.1:
[HKEY_LOCAL_MACHINE\HARDWARE\DEVICEMAP\KEYBD]
I modified CurLang to 407 in hexadecimal (or 1031 in decimal) and it's working perfectly!
hum :$
It doesn't works on my hardware touch pro keyboard event after 4-5 soft reset
Somebody can help me ?
I'm using the new energy rom (Aurora, WM 6.5).
Thx!
Mastersey said:
hum :$
It doesn't works on my hardware touch pro keyboard event after 4-5 soft reset
Somebody can help me ?
I'm using the new energy rom (Aurora, WM 6.5).
Thx!
Click to expand...
Click to collapse
You might want to ask some help in your ROM thread!
Solution! German Keyboard / "Umlaute" (Fn+Space) working with english 6.1 !!!
Ok guys and girls,
the title may sound like i know what I'm doing, but I'm a noob to all of this after all. Still I managed to get the "Umlaut"-function (Fn + Space) working on an english 6.1 ROM. The ROM running my German TYTN II is L26_KaiserDiamond_V9.
Ok, so here's what I did:
1. set Keyboard layout to "German" in AdvancedConfig
2. changed value of registry key HKLM\HARDWARE\DEVICEMAP\KEYBD\CurLang from 409 to 407
3. installed XDA_JCEspi2005_German_Input_Kaiser.cab (see http://forum.xda-developers.com/showthread.php?t=345426)
4. copied the file "sym.0409.txt" (located in DEVICE \Windows), renamed the copy to "sym.0407.txt"
et voilá!
I guess step 4 is what did the trick... even though I still can't believe that the solution was this simple. Someone else give it a try... maybe on a different ROM. Would be cool if this was the definitive solution.
greetings,
cartonneexpress
Yes but it is also important to disable XT9 with KaiserTweak or AdvancedConfig. Otherwise the Fn + Space dose not work for me.
thank your very much,
works perfect for me, too
bye andré
Hi,
does not work with my ROM (3.28.405.0 WWE) with WM6.1 Prof.
I have still the QWERTY keyboard.
Regards
kuzco
kuzco1 said:
Hi,
does not work with my ROM (3.28.405.0 WWE) with WM6.1 Prof.
I have still the QWERTY keyboard.
Regards
kuzco
Click to expand...
Click to collapse
softreset??
lanwin said:
Yes but it is also important to disable XT9 with KaiserTweak or AdvancedConfig. Otherwise the Fn + Space dose not work for me.
Click to expand...
Click to collapse
Notice: For me this only works with the Hardware keyboard (L26_KaiserDiamond_V9). If someone knows a method to change the software keyboard (Windows Default) it would be very nice.
lanwin said:
Notice: For me this only works with the Hardware keyboard (L26_KaiserDiamond_V9). If someone knows a method to change the software keyboard (Windows Default) it would be very nice.
Click to expand...
Click to collapse
after 2 softresets it works also for me, but also only the hardware keyboard. for the software keyboard i take pcmkeyboard.
You can also try those 2 in combination, works and is a little bit easier ;-)
http://forum.xda-developers.com/showpost.php?p=1673274&postcount=2
http://forum.xda-developers.com/showpost.php?p=1689272&postcount=20
as I stated, this reactivates the "Fn+Space"-Umlaute on your keyboard.
no idea why one would think that this has any affect on the softkeyboard... but here's the suprising solution for you: install a german softkeyboard! i'm sure you'll find one on xda-devs.
cartonneexpress said:
no idea why one would think that this has any affect on the softkeyboard... but here's the suprising solution for you: install a german softkeyboard! i'm sure you'll find one on xda-devs.
Click to expand...
Click to collapse
Oh i searched a little while for it but i did not found any useful.
For the hardware keyboard have you tried to change the value of registry key HKLM/HARDWARE/DEVICEMAP/KEYBD/CurLang from 409 to 407
And then HKCU/MUI/CurLang 409 changed to 407 (Hexadecimal).
Then softreset and after that install XDA_JCEspi2005_German_Input_Kaiser.cab
And then softreset again.
In some roms i could not find one of the registry keys but then it was enough to change the other.
Billun said:
For the hardware keyboard have you tried to change the value of registry key HKLM/HARDWARE/DEVICEMAP/KEYBD/CurLang from 409 to 407
And then HKCU/MUI/CurLang 409 changed to 407 (Hexadecimal).
Then softreset and after that install XDA_JCEspi2005_German_Input_Kaiser.cab
And then softreset again.
Click to expand...
Click to collapse
It works for me in ROMeOS v4
thx a lot
Billun said:
For the hardware keyboard have you tried to change the value of registry key HKLM/HARDWARE/DEVICEMAP/KEYBD/CurLang from 409 to 407
And then HKCU/MUI/CurLang 409 changed to 407 (Hexadecimal).
Then softreset and after that install XDA_JCEspi2005_German_Input_Kaiser.cab
And then softreset again.
In some roms i could not find one of the registry keys but then it was enough to change the other.
Click to expand...
Click to collapse
Thx, this works, the original doesn't.
Stefan
lanwin said:
Oh i searched a little while for it but i did not found any useful.
Click to expand...
Click to collapse
then give this one a try. As many different KB layouts as you could wish for, including national characters (although only 2 at a time, switch-able by a key next to R-ALt). @ the mo, I'm using Polish and Norwegian.
NO, I'm not affiliate, just a happy user.
Ah yes, it's NOT free, but at 9.99 PLN (or 2.99 €) anyone can afford it.
And YES, it IS skinnable.
DL a trial version, give it a shot, see for yourself.
With me I can now type fn + space but the Y is a Z and vice versa
What else can I do than reading and searching ?
cartonneexpress said:
Ok guys and girls,
the title may sound like i know what I'm doing, but I'm a noob to all of this after all. Still I managed to get the "Umlaut"-function (Fn + Space) working on an english 6.1 ROM. The ROM running my German TYTN II is L26_KaiserDiamond_V9.
Ok, so here's what I did:
1. set Keyboard layout to "German" in AdvancedConfig
2. changed value of registry key HKLM\HARDWARE\DEVICEMAP\KEYBD\CurLang from 409 to 407
3. installed XDA_JCEspi2005_German_Input_Kaiser.cab (see http://forum.xda-developers.com/showthread.php?t=345426)
4. copied the file "sym.0409.txt" (located in DEVICE \Windows), renamed the copy to "sym.0407.txt"
et voilá!
I guess step 4 is what did the trick... even though I still can't believe that the solution was this simple. Someone else give it a try... maybe on a different ROM. Would be cool if this was the definitive solution.
greetings,
cartonneexpress
Click to expand...
Click to collapse
Easyest way to do this:
With a Registry Editor, search and edit the key to the following value:
[HKEY_LOCAL_MACHINE\HARDWARE\DEVICEMAP\KEYBD]
"CurLang"=dword:00020407
Or download patch below...
neo2k2 said:
Easyest way to do this:
With a Registry Editor, search and edit the key to the following value:
[HKEY_LOCAL_MACHINE\HARDWARE\DEVICEMAP\KEYBD]
"CurLang"=dword:00020407
Or download patch below...
Click to expand...
Click to collapse
The patch doesn't work for me, changed nothing :hmm:
What did the trick was
Regedit [HKEY_LOCAL_MACHINE\HARDWARE\DEVICEMAP\KEYBD]
"CurLang"=dword:00020409 to 00020407 for German, other language see here
Install Jespis German/language cab http://forum.xda-developers.com/showpost.php?p=1673274&postcount=2
Result is qwertz and after vocale Fn+Space = "Umlaut" + German dictionary
Thanks and greets,
h.b.
Keyboard layout
It worked on my Kaiser! All symbols were messed up, but now it's ok. Thnx a lot, cartonneexpress!
Aloha!
Looking through a lot of threads for quite some time but cannot find a hack to switch the hardware keyboard mapping from qwerty to azerty.
The WM 6.1 method doens't seem to work for WM6.5...any ideas?
Thanks a whole lot!!
You tried this?:
\HKEY_LOCAL_MACHINE\HARDWARE\DEVICEMAP\KEYB\CurLang
changing this value ?
azerty is french so propably there should be 1036
k0l0r3k said:
You tried this?:
\HKEY_LOCAL_MACHINE\HARDWARE\DEVICEMAP\KEYB\CurLang
changing this value ?
azerty is french so propably there should be 1036
Click to expand...
Click to collapse
Thanks, but that is the WM 6.1 method I think.
There is no such key in my "WM 6.5 by MEDKIT" rom installation.
If I create it and fill in the value still same qwerty mapping.
All help welcome!
you can still use jcespi2005's cabs for wm6.5.....
http://forum.xda-developers.com/showthread.php?t=345426
if you don't have your language, install azerty one:
http://rapidshare.com/files/70647295/XDA_JCEspi2005_French_Input_Kaiser.cab
and change settings to match your language
arnoo said:
you can still use jcespi2005's cabs for wm6.5.....
http://forum.xda-developers.com/showthread.php?t=345426
if you don't have your language, install azerty one:
http://rapidshare.com/files/70647295/XDA_JCEspi2005_French_Input_Kaiser.cab
and change settings to match your language
Click to expand...
Click to collapse
Yepp that works fine on 6.5 roms. I used it to switch Joshs 6.5 rom from qwerty to qwertz.
Weird! I tried both:
XDA_JCEspi2005_French_Input_Kaiser.cab and XDA_JCEspi2005_Dutch_Input_Kaiser.cab but my hardware keyboard mapping didn't change at all.
My ROM is MedKit's WM 6.5 rom...
This same method did work on my previous roms though (WM 6.1 and below).
What 6.5 ROM do you people (who succesfully switched hardware keyboard mapping) use?
Maybe I'm going to try another ROM or so.
Thanks a lot for the replies btw!
I used in on medkits and joshs.
First you have to change the 2 reg keys -> softreset -> install cab -> softreset
Z3rO` said:
I used in on medkits and joshs.
First you have to change the 2 reg keys -> softreset -> install cab -> softreset
Click to expand...
Click to collapse
The 2 reg keys? Wich ones?
I only know of the CurLang change but in the medkit rom I even had to add a Curlang variable if I wanted to change it.
And which of those 2 ROMs do you prefer? Haven't tried the one from Josh yet but maybe I should.
Vielen dank!
HKCU\MUI\CurLang
HKLM\HARDWARE\DEVICEMAP\KEYBD\CurLang
It seems to be important to enter decimal values. NOT hex values.
After changing those two keys, softresetting and installing the cab resulting in another softreset I get my qwertz keyboard layout.
And you should really try Joshs rom. Build 21193 is so muich faster than previous ones
Z3rO` said:
HKCU\MUI\CurLang
HKLM\HARDWARE\DEVICEMAP\KEYBD\CurLang
It seems to be important to enter decimal values. NOT hex values.
After changing those two keys, softresetting and installing the cab resulting in another softreset I get my qwertz keyboard layout.
And you should really try Joshs rom. Build 21193 is so muich faster than previous ones
Click to expand...
Click to collapse
Thanks a lot for the info!
Just tried Joshs 21193 and it is indeed very fast.
But since I noticed there's even an 21198 by Anryl I'm flashing again to check that rom's speed. Once I start installing my crap I won't feel like flashing another rom for a few weeks so better make sure to try to have the best rom now.
21198 also is quite fast so sticking to that one. Changed the to reg values which I could find in this rom as opposed to the medit rom I tried yesterday and changing them did fix my hardware keyboard to azerty.
Thanks again for the info and have a nice day!!