Bluetooth Stereo only plays mono source over left channel - Non-Touchscreen Windows Mobile Other

Hello,
I have a number of mono sound sources (Internet radio, Audiobooks on MP3 etc...) and can't figure out how to make the A2DP connection to my bluetooth stereo headsets play the mono source over the right AND left channels. I don't care that it would be mono+mono.
Is there anything I can do to configure this from the WM6 SmartPhone itself? I've connected my HTC X730 (Verizon rebranded) to 4 different stereo headphones and one of them did play the stream over both right and left channels, but none of the others did.
??
Thanks.
Bill Fields

are you shure that you connect it by using a2dp ?
when you connect it as a headset, you will only hear mono.
you have to connect it as a bluetooth stereo headset !

Pretty sure I guess. I go into Bluetooth settings and select "Set as Wireless Stereo". That, and the SmartPhone home screen's titlebar icon looks like a headphone with a music note inside it.
One other side-note, if I listen to the same content on my PC with WMP it plays over both speakers, but if I stream it via A2DP from my phone to the same PC via the WMP on the phone, it only plays over the left speaker.

maybe you should try an other (newer) rom

Related

Bluetooth CAR radio with HTC TP

Did anyone try this? I'm thinking of buying a new radio WITH bluetooth..
IF the bluetooth radio stuff works, then tomtom/music could go via my HTC which would be awesome... or is it possible to play MP3's via an USB outlet, or have some auxout to my htc?
A few months ago, I bought a head unit (Dual XHD6425) that has front panel aux out, usb, and bluetooth. I originally got it for its 3.5 mm auxillary out for my ipod, but I then bought the add-on bluetooth module and started using my cellphone and now my Fuze. Bluetooth audio streaming (A2DP) is much more convenient as there are no wires to deal with. The TF3D music program supports AVRC so you can use the unit's fast fwd/rewind/stop buttons to control playback. Tomtom also routes its audio through the bluetooth interface as well. Of course, you also get hands-free calling, which is great as I usually forget to put on or turn on my bluetooth headset when I enter my car.
My head unit could also play music from USB sources (name hard drives, etc, but strangely not ipods). The unit was able to read from the Fuze since it can mount itself as a storage drive providing access to the microsd card. However, in this mode, I'd have to scroll through songs using the unit's interface, which was not very easy to navigate. Still, I can use the USB port to charge/power devices if I needed to do so.
^^^Ditto what he said^^^
My Xterra has a Pioneer single din headunit with built-in Bluetooth. A2DP streaming works great, but sometimes sounds a little tinny or washed-out. If you have added a subwoofer to your vehicle then get a headunit with an independent subwoofer level control. Some songs will be very bassy, while others will need some added punch...this can be adjusted very easily especially with a remote-mount bass level knob.
You can also sync your contacts over to the BT headunits and set speed dials as well as picture dials in some cases. My Pioneer replacement will be a double din 7" touchscreen dvd player with BT. Make sure it has plenty of audio controls/adjustments...digital time correction is a nice feature to help balance sound and set stage.

Diamond as a bluetooth stereo headset

Is there a way to use Diamond as a bluetooth stereo headset? When I watch movies using a projector I’d like to transfer the audio stream from my laptop via bluetooth to Diamond and listen to it using its headset. But I can’t make it work. It works perfectly in the opposite direction so I can transfer music stream from Diamond to the laptop and able to hear it through its speakers. So both devices support A2DP profile.
Is there any solution?

[Q] calls and media control using bluetooth and wired head phones

Is there any possibility to use bluetooth clips (Motorola S605, SE MW600, Nokia AD-57 etc.) as mic for answering calls and controlling player (play, pause, next, previous) and using wired headphones connected DIRECTLY to mobile phone in order to use high quality 3.5mm headphones instead of listening through them over bluetooth and having this ****ty sound? Thanks in advance.
Yes, for bluetooth for sure.
Well just to be sure - I connect wired headphones to SGS directly (not to the bluetooth clip 3.5mm hole), pair the bluetooth clip with SGS, start player and listen to music through headphones and have ability to start-stop player by bluetooth clip buttons. When the call comes I hear it in headphones and start-stop player or push call answer button on bluetooth clip. After pushing answer button I hear calling person's voice in headphones but talk to the bluetooth mic. After call is ended I can start-stop playing music again by bluetooth buttons. This is 100% tested or it's is appeared to be working? Thanks.
Could anyone confirm my last post? Thanks.
Bump any answer?
Just tried, no go sorry.
If you could find an AVRCP profile device without A2DP or mono-bluetooth output it might work, but I don't expect any exist.

Headphones with working previous/next/volume buttons

Are there any good in-ear headphones with working previous/next buttons to control next/previous track and volume in any music player?
Hi well I've been using the Altec Lansing BackBeat 903 Bluetooth Headset for about 3 months now and that has all the features your looking for plus they sound damn good as well.
I use the stock headphones with winamp, and double tap the pause button and it skips to the next track
But for a real solution with back.. you could get one of the little reciever thingies with a 3.5 jack, so you get wireless + controls + any headphone you like ^_^. But there could be some quality loss if its cheap..
Motorola's s9-HD also have theses foncions enabled.
Thanks for the replies. Those two seem to be ear-hugging types, are there any with regular design?
the best would be to use the Nokia remotes that came with the n95 and others. But apparently it doesn't work since the layout inside the jack are not the same between Samsung and Nokia... too bad
I have a question about this topic, I tried to use the apple in-ear headphones with the mic and the volume buttons on my SGS but when i fully plug it into the jack, theres no sound.... but if i leave it out abit then it works fine.... Do u guys know what is going on?
Any Bluetooth headset supporting A2DP (Advanced Audio Distribution Profile : For Stereo audio) and AVRCP (Audio/Video Remote Control Profile) should work. There are plenty of BT headsets out there. Search for A2DP Bluetooth headsets (if they have media player controls then the chances are they support AVRCP too).
I use a Bluetooth clip, it gives a certain amount of wireless freedom and the ability to use any 3.5mm headphone. If you already have a good pair of headphones you like then a BT clip is perhaps the best way to go.
Here is what I use (Motorola S605):
With a display (SonyEricsson WM600 ):
Both of them have a built in Stereo FM radio as well, if you listen to radio that could come in handy (since the radio on SGS is mono ).
EDIT: One last thing, Audio quality over Bluetooth is slightly lower compared to a wired connection. This is due to the compression codec used in Bluetooth transmission. However, the difference depends entirely on your expectation of sound quality and the quality of your audio files. For example if you are an average user who is happy with a pair of $25 head/earphones listening to MP3s encoded at 128kbps then you won't notice a difference. But if you are an audiophile having $100+ headphones listening to 256kbps+ encoded MP3s then you’ll definitely notice a difference.
PhoenixFx said:
But if you are an audiophile having $100+ headphones listening to 256kbps+ encoded MP3s then you’ll definitely notice a difference.
Click to expand...
Click to collapse
Could you please tell me is this possible with bluetooth clips:
I connect wired headphones to SGS directly (not to the bluetooth clip 3.5mm hole), pair the bluetooth clip with SGS, start player and listen to music through headphones and have ability to start-stop player by bluetooth clip buttons. When the call comes I hear it in headphones and start-stop player or push call answer button on bluetooth clip. After pushing answer button I hear calling person's voice in headphones but talk to the bluetooth mic. After call is ended I can start-stop playing music again by bluetooth buttons. This is 100% tested or it's is appeared to be working? Thanks.
baribalbear said:
Could you please tell me is this possible with bluetooth clips:
Click to expand...
Click to collapse
I don't think it works like that, but I have to check to confirm.
baribalbear said:
pair the bluetooth clip with SGS, start player and listen to music through headphones and have ability to start-stop player by bluetooth clip buttons.
Click to expand...
Click to collapse
When you are not using BT audio, I doubt the player will respond to BT player controls.
baribalbear said:
After pushing answer button I hear calling person's voice in headphones but talk to the bluetooth mic.
Click to expand...
Click to collapse
I dont think you can split the mic and headset function like that, either you use the BT for both mic and headphone or not at all. (unless someone modifies the driver). But again, something I have to check to confirm.
For basic call and volume controls something like this might work.
Here is another alternative, but no mic (not released yet either).
PhoenixFx said:
Here is what I use (Motorola S605):
Click to expand...
Click to collapse
Very helpful, purchasing from ebay as we speak, im sick of not being able to switch song whilst cycling...
Just a question really, do you just use the standard samsung music player?
PhoenixFx said:
Any Bluetooth headset supporting A2DP (Advanced Audio Distribution Profile : For Stereo audio) and AVRCP (Audio/Video Remote Control Profile) should work. There are plenty of BT headsets out there. Search for A2DP Bluetooth headsets (if they have media player controls then the chances are they support AVRCP too).
I use a Bluetooth clip, it gives a certain amount of wireless freedom and the ability to use any 3.5mm headphone. If you already have a good pair of headphones you like then a BT clip is perhaps the best way to go.
Here is what I use (Motorola S605):
With a display (SonyEricsson WM600 ):
Both of them have a built in Stereo FM radio as well, if you listen to radio that could come in handy (since the radio on SGS is mono ).
EDIT: One last thing, Audio quality over Bluetooth is slightly lower compared to a wired connection. This is due to the compression codec used in Bluetooth transmission. However, the difference depends entirely on your expectation of sound quality and the quality of your audio files. For example if you are an average user who is happy with a pair of $25 head/earphones listening to MP3s encoded at 128kbps then you won't notice a difference. But if you are an audiophile having $100+ headphones listening to 256kbps+ encoded MP3s then you’ll definitely notice a difference.
Click to expand...
Click to collapse
I like these, thanks.
How does this things work? Do you plug anything to the usb port or do you just enable blutooth and play? Also can you use previous/next buttons while the screen is locked? Can you do these with the default player or do you need anything like WidgetLocker and add the player to the lock screen?
Also are there any wired versions of these?

Help with Bluetooth (media streaming vs. in call audio)

I use a USB bluetooth dongle with a 3.5 mm headphone jack in my car in order to stream music from my phone. I plug the dongle into the lighter outlet for power and then connect the dongle to the aux jack in the car's stereo. Everything works great when playing any media. However, it won't connect for call audio. If I were to dial a phone number, the sound from the key touches play through the radio, but as soon as the call connects the audio plays through the phone's earpiece. I am not able to get the in call audio to stream through my bluetooth. When I go to the bluetooth settings, I see an option for media audio and nothing for in call audio. If anyone can help me get this fixed, that would be great. Also, I am on CM 10 RC 1, but this did the exact same thing on stock touchwiz.
Bump
I have the same issue on stock. This thread isn't the same as what you're asking, but he does state that he is trying to find a workaround to the same issue.
http://forum.xda-developers.com/showthread.php?t=1875877
Thanks for the reply. However, my issue is that once a call connects, the audio goes through the phone's earpiece. I can only stream media (youtube, Pandora, music, etc.) through Bluetooth, but calls won't connect to my Bluetooth setup at all.
I really hope someone has a solution to this.

Categories

Resources