OK, i was messing around with Jetware, I installed this damn program in hopes that I will be able to hear my ring tones through Jawbone BT Headset. Surprisingly it did the job, but i didn't know this crap comes with side effect. Now my phone does not ring at all, everything comes to the headset. I just wanted both to ring the same ringtone just in case if I don't have my BT on me how would I hear??! on top of that if I place my phone on vibrate then i do not hear anything on the headset. So I removed the Jetware completely from my phone but for some reason nothing has changed. I am still hearing the ringtone from the headset now and no ringtone on the phone itself. Is there anyway I can have the phone ring as it used to?and how can i have the BT headset ring when the phone is in vibrate state?
I really hate the flash the rom again as I have done too much customizations.
Please help....
Thanks in advance
K
This is why we backup our precious every morning at 3am... We also tell the backup software to reset our precous 'cause precious seems to be happier if precious is reset daily.
Seriously you might want to reinstall and turn off everything then do an uninstall. You can also search your registry for the entries that jetware changed (try deconstructing their cab file).
And I would really recommend the daily backup it has saved my backside more than a dozen times!
kyphur said:
This is why we backup our precious every morning at 3am... We also tell the backup software to reset our precous 'cause precious seems to be happier if precious is reset daily.
Seriously you might want to reinstall and turn off everything then do an uninstall. You can also search your registry for the entries that jetware changed (try deconstructing their cab file).
And I would really recommend the daily backup it has saved my backside more than a dozen times!
Click to expand...
Click to collapse
what would you recommend using for a backup of registry every day at 3am?
I was able to restore it somehow, i installed other version of cyberon first and looked in the registry entries, there was one called LauchAPEnable under bluetooth registry stuff that was missing after I removed the jetware. So then I uninstalled the cyberon and added that registry entry, now it works fine as before with one exception: when I hit the BT headset button cyberon starts without a beep when not muted, before it used to beep ones.
Use either Sprite backup (avaliable with a little searching in the Wiki, look for my XDA Live Tilt Files) or Spb Backup (have to purchase)
Either will do the job and they can backup everything not just the registry.
Jetware installed an accessible option setting in :
/ Start-->> Programs -->> Bluetooth Options -->> Hands-Free Config
/ go there and tap on the Menu ( bottom right corner )
/ select "Advance options" ( a warning will popup )
/ there is an option in there to check/uncheck "use phone ringtones" feature ...etc
if you'd already went through this route and unsuccessful ... then you are SOL
I just thought that you might have not seen these settings
goodluck ...
Related
First of all, I want to say thank you to the people who have spent their time to get A2DP working. I'm sure it wasn't easy and your efforts are truely appreciated!
So I have been trying to get A2DP working smoothly on my SDA for several weeks now. It sounds great and it never skips if I have just done a soft reset. If I pause the music and try to resume later, a "skip" in the music stream develops. It does not seem to help if I restart the music player (tried WMP and TCPMP) or if I power cycle the headset or the bluetooth antenna in my SDA. I have tried several headsets, including the Motorola HT-820's, the Bluespoon Spider, and both the black and white pair of Logitech headsets. All of them have had a skipping problem, but they were also slightly different problems; the Moto's had a relatively infrequent skip occuring every 30 seconds to a minute, lasting 1-2 seconds. The Spiders skiped once every 10 seconds, lasting about 1 second. Both my Logitech sets skip every 3 or 4 seconds, but the skip only lasts for 1/4 of a second or less.
In the last 2 weeks, I have also recieved a new SDA compliments of T-mobiles warranty service and my results were similar with both SDA's. Other things I have tried:
- Hard reset, installing only Tornado_A2DP.cab and Tor_A2DP_cert.cab
- Hard reset, installing the cab file and the certs in opposite order
- Priority256, UseJointStereo, and BitPool reg hacks
- SurrealNetworks performance booster cab file
- Overclocking the CPU on my first SDA (don't want to try on my new SDA)
One odd thing which I have noticed is if I am navigating the menu on my SDA or even just using the joystick to select different items on my homescreen, the skip seems to stop. But it always starts skipping again once I am done playing with my phones menu.
I believe the only thing left to try is an AKU2.0 rom, but I don't want to void the warranty on my SDA yet. Does anyone have any ideas? Are their any different values I should try concerning the reg hacks? Is anyone running imate and qtek roms with the A2DP hack and experiencing skips? TIA
aku2 rom
Here is a link to the qtek8300 aku2 rom. I am using it on my qtek 8300, w/ the a2dp hack, no skipping problems. I am jealous that you have 2 SDAs, you suck. good luck, anyway.
http://www.smartmobil.no/index.php?name=UpDownload&req=getit&lid=84
dm251z said:
Here is a link to the qtek8300 aku2 rom. I am using it on my qtek 8300, w/ the a2dp hack, no skipping problems. I am jealous that you have 2 SDAs, you suck. good luck, anyway.
http://www.smartmobil.no/index.php?name=UpDownload&req=getit&lid=84
Click to expand...
Click to collapse
Lol, I had to send my old SDA back. But I was able to experiment with both SDA's for a couple of days and they both had similar problems.
What kind of headset are you using? Do you have to set as wireless stereo everytime you want to listen to music, or do you just pair the headset and you're good to go?
hey, I tried the motorol HT820, and they were uncomfortable and had bad distortion. I returned those, and got a Sony HBH DS970, and they are very comfortable, and sound terrific (cheaper, also). AVRCP controls work with WMP. Hopefully, they will work w/ the new coreplayer, haven't heard anything about that.
Once the headset is paired it is ready to go, BUT, there is one issue. If a call comes in while listening to music, the call works fine, but when the call is over, the phone has to be manually switched back to 'set as wireless stereo'. IMHO, this has been a relatively minor inconvenience.
I also thought the ht820's were uncomfortable, but I never experienced the high pitch distortion that a number of people have been complaining about. Those sony's look nice, but i'm looking for an around-the-head style headset like the moto's or logitech's. That's good to hear the sony set works well, despite the call issue.
Thanks for the feedback
dm251z said:
Once the headset is paired it is ready to go, BUT, there is one issue. If a call comes in while listening to music, the call works fine, but when the call is over, the phone has to be manually switched back to 'set as wireless stereo'. IMHO, this has been a relatively minor inconvenience.
Click to expand...
Click to collapse
Strange one that... I have an O2 IQ (Tornado, I believe, although it may be an Innovation?) and after applying the A2DP_Tornado cabs all is well, I have had no skipping, calls work properly, WMP pauses playback on an incoming call and resumes once the call is dropped as it should...
I notice in the first post there was no mention of replacing the DLL's... you are replacing them right? And with something like Resco File Explorer or the like... using the default explorer may not actually replace the DLL's!!
Funny you mention that because I didn't install the DLL's the first time i did the hack weeks ago, but I have copied the DLL's to the windows directory the last several times I tried hard resetting and reinstalling. Also, those DLL's don't exist in my windows directory on my SDA, so my only option is to copy them to the directory.
So I just tried this hack again. Steps are as follows...
1. Hard Reset
2. Sync with my computer, copy DLL files to \windows\, soft reset
3. App unlock the SDA, soft reset
4. Run certs cab, soft reset
5. Run A2DP cab, install to device, soft reset
6. Sync with bt headset
I listened to music for about 5 minutes and it was crystal clear. Paused for 5 minutes and then resumed the music and it still skips Thanks for the suggestion, it was well worth trying.
Can someone explain what the SBC.dll file does? The readme in the a2dp zip file shows reg edits concerning the other 2 dll's, but it doesn't show a reg edit involving the SBC.dll file.
Activesync...
Not sure that copying the files over with active sync will work...
And without a 3rd Party explorer you won't see the dll's in ROM, because of this I don't think they will overwrite... an app like Resco File Explorer (or smartphone version of Total Commander if there is one) allows you to see all the dll's and overwrite them with no problems...
You won't get an error using the default explorer, it just won't update the files... one way to try it is to d/l the demo of Resco File Explorer (or get a copy by other means) and do it that way...
spkr4thdd said:
Strange one that... I have an O2 IQ (Tornado, I believe, although it may be an Innovation?) and after applying the A2DP_Tornado cabs all is well, I have had no skipping, calls work properly, WMP pauses playback on an incoming call and resumes once the call is dropped as it should...
I notice in the first post there was no mention of replacing the DLL's... you are replacing them right? And with something like Resco File Explorer or the like... using the default explorer may not actually replace the DLL's!!
Click to expand...
Click to collapse
The "call issue" is particularly strange, because I didn't have it with the HT820s, only the sony headphones have that problem. I have read that other folks have also been having that issue w/ the sony headphones, so maybe it is specific to the sony bluetooth settings? Probably they rigged them so they would only work right w/ the Sony Walkman phones. anyway, I am still happy with them.
spkr4thdd said:
Not sure that copying the files over with active sync will work...
And without a 3rd Party explorer you won't see the dll's in ROM, because of this I don't think they will overwrite... an app like Resco File Explorer (or smartphone version of Total Commander if there is one) allows you to see all the dll's and overwrite them with no problems...
You won't get an error using the default explorer, it just won't update the files... one way to try it is to d/l the demo of Resco File Explorer (or get a copy by other means) and do it that way...
Click to expand...
Click to collapse
On previous attempts to make this hack work, I have used the stock file explorer, Activesync, and Total Commander to copy the DLL's. I just did a hard reset and copied the DLL's via Resco, installed the cabs and the skip is still there
On a side note, I looked in the windows directory using Resco before I copied the DLL's and the 3 DLL's were not to be found in my ROM prior to copying them. :shrug:
mmm said:
On previous attempts to make this hack work, I have used the stock file explorer, Activesync, and Total Commander to copy the DLL's. I just did a hard reset and copied the DLL's via Resco, installed the cabs and the skip is still there
On a side note, I looked in the windows directory using Resco before I copied the DLL's and the 3 DLL's were not to be found in my ROM prior to copying them. :shrug:
Click to expand...
Click to collapse
When I installed, file transfer over activesync worked fine. What are you doing about the registry edits? I know that there have been some cab files claiming to do them automatically, but when I installed, I just typed them in using a registry editor. If you didn't enter them manually, maybe you might want to check to make sure that they have been modified as they are supposed to be.
Ya, I've seen the A2DP_improve.cab file, but I haven't used it. I have been manually entering the reg edits via Total Commander. The priority256 edit is supposed to fix the skip problem, but it isn't doing the trick for me. I've been entering 60 as the dword value, but is there a different value I should try that might be more effective?
Curious. I just followed the instructions on kyungas original post, which had a number of "dword" values. I have no clue at all what any of them means or does, but none of them are set to 60.
The Priority256 key isn't noted in kyungas first post. This key is a claimed to be an improvement hack noted in this thread...
http://forum.xda-developers.com/showthread.php?t=269638&highlight=a2dp+improve
Go ahead, just ask me how many times I have used the search button
Well, i finally broke down and installed the latest i-mate ROM. My skipping problem has disappeared, the interface is much better, and my phone is definitely running faster. I may have voided my warranty, but i'm a much happier camper now.
Thanks to everyone who tried to help me with the skipping problem on the stock ROM, your input was greatly appreciated.
My Cruise has recently developed an annoying problem. I can make/receive calls by using speakerphone/bluetooth headset but there is no sound from the internal speaker. It is very odd to have to listen to all your calls on speakerphone. It looks like a hardware issue to me but before I send it in I wanted to check if this could possibly be linked to some software glitch.
Hi there,
I have the same issue, when I dial a number and I have the headset plugged in , the sound comes out from the internal phone speaker.
Very annoying !!. Does anybody have a clue on how to fix this ?
I have the French ROM.
Thank you,
Roundi
i think if you are using stock rom and it doesnt get fixed after a hard reset you should probably get it replaced.
Hello,
What is a stock rom ?
Thanks.
A standard ROM (or firmware), as opposed to one of the "cooked" ROMs from forums such as this.
I backed up my data (SPB Backup) and restored the original ROM (I dont have cooked ROM).
The sound is now OK ! (and not going through the speaker when I plug the Headphone)
I backuped the Mobile again in order to have the original files (system, registry ...)
I restored the first backup to get back all the program and data previously installed.
I have a different behaviour now and I discovered that Phone Screen Lock application is to blame: when locking the screen the speaker is activated for few seconds then the sound go through the headset.
Thank you clev001 for the hint.
Regards,
Ronald
roundi said:
I backed up my data (SPB Backup) and restored the original ROM (I dont have cooked ROM).
The sound is now OK ! (and not going through the speaker when I plug the Headphone)
I backuped the Mobile again in order to have the original files (system, registry ...)
I restored the first backup to get back all the program and data previously installed.
I have a different behaviour now and I discovered that Phone Screen Lock application is to blame: when locking the screen the speaker is activated for few seconds then the sound go through the headset.
Thank you clev001 for the hint.
Regards,
Ronald
Click to expand...
Click to collapse
Hi, i have the same problem ... can you explain how you solve the problem?
Thanks
Hi ,
Unfortunatly I dont have time to debug the problem, so I removed Phone screen lock software and restarted the unit.
Now it is working again normally
Hi guys,
I know that Diamond users had similar problem but I cannot solve this issue the way provided on Diamond forum. Or I'm doing something wrong :]
Reason - I've just copied my contacts from sim to TP and in Contact TAB i've got everything doubled.
I've tried:
1. Modify registry (ShowSim = 0) - doesn't help - after soft reset this value is still 1 (is registry locked? I've tried CeRegEditor with unlock registry option first - no effect and with TotalCommander - the same)
2. Tried advanced config for Diamont - No Sim contact, soft reset - nothing.
3. Tried this link http://forum.xda-developers.com/showpost.php?p=1959449&postcount=4 - doesn't help.
Any other ideas?
Regards
B.
bzdziagwa said:
Hi guys,
I know that Diamond users had similar problem but I cannot solve this issue the way provided on Diamond forum. Or I'm doing something wrong :]
Reason - I've just copied my contacts from sim to TP and in Contact TAB i've got everything doubled.
I've tried:
1. Modify registry (ShowSim = 0) - doesn't help - after soft reset this value is still 1 (is registry locked? I've tried CeRegEditor with unlock registry option first - no effect and with TotalCommander - the same)
2. Tried advanced config for Diamont - No Sim contact, soft reset - nothing.
3. Tried this link http://forum.xda-developers.com/showpost.php?p=1959449&postcount=4 - doesn't help.
Any other ideas?
Regards
B.
Click to expand...
Click to collapse
TBH Make a backup of your contacts as they are now (even if they are doubled)using PIMBackup....and delete the contacts from the SIM card. Atleast you have a backup on file off the device??
I havent used SIM memory for MANY years now.
Hmmm I've tried everything many times (mentioned below) and resigned.
Then after 2-3hours I've installed Green Battery soft, then restart and... now it works like hell !
I mean that no sim details in contacts.
So I have no IDEA with action fix this problem - a little confused now :?
Regards
B.
Windows mobile will ALWAYS display your SIM contacts as well as contacts in the phone memory. There are plenty of third party apps out there that will stop this, or you can find the registry edit in the site somewhere.
Easiest way is to use something like Schaps 3, or that battery soft that you mention.
Can't understand why som many people insist on using SIM memory nowdays, when people hae multiple numbers, you end up with multiple contacts for the same people....
Well, each to their own i suppose.
My contacts were on SIM because I'vw switched from.....Nokia 6310i
Now I've fixed the problem manually (regedit) because AdvancedConfig tool doesn't help. Just funny thing that to save registry settings SHUT DOWN of device is required not soft reset.
Regards
B.
Ah! One of the best handsets Nokia ever made. My Landlord has three, just in case one of them dies!
Great phones!
Although again, it came with Nokia PC Suite to sync to outlook, but it was a real PITA as it always puts the mobile numbers in the 'other' field in outlook so they don't get touched by activesync!
as for the soft reset thing, seems to work ok on mine. Change something in schaps 3, and soft reset when it tells me to and all seems to be well.
lol, well i guess that's why windows mobile is such fun huh??
whats registry setting did u change? AdvancedConfig isnt working for me either. I cant delete the sim contacts, cos its a temporary SIM. Ill have a blank SIM soon, but for now, I'd like to stop SIM contacts showing up.
Thanks
I just got it to work using AdvancedConfig. I said 'No' when it asked to soft reset. Then checked contacts and the SIM contacts are gone. No restart, no shut down, nothing. When i did this and said 'yes' to the soft reset, it didnt work. Odd
If you go into settings, Phone, Call options is there no longer a check box to not show SIM contacts as in WM6.0 phones?
You must change value
HKCU\ControlPanel\Phone\ShowSim from 1 to 0
and then (very important) do not soft reset because value will be restored to 1
you must shut down TP - this information was provided by someone here and it works
BTW
Even if you switch off ShowSim option, for the first 10-30sek after booting TP you will find doubled contacts but then the sim contacts are dissapearing
Regards
B.
hey guys.
i'm pretty new at this. i unlocked my phone way back over a year ago, but didn't do much other than add a bunch of programs and emulators. never flashed the rom....until yesterday night.
now i have IPL & SPL 3.08, Radio 2.71.11, OS 10.0.0.10 (i think) and flashed with SNN Diamond.
i'm having two problems (so far anyways):
1. bluetooth is not working right. i can connect to other phones. i can connect to the car bluetooth system and i can hear other people. but they can't hear me. this is a pretty big deal because i need to use bluetooth! how can i fix this problem?
2. this is not essential but it's annoying. when i hang up a call, i can't press "call" from the same screen (i.e. redial) because nothing will happen. it doesn't matter if i press the call button on screen or the actual hard button, the dialer wont call unless i go into phone book or history or otherwise enter the a number. just can't redial how do i fix this?
any help would be greatly appreciated!
Max_Pain said:
hey guys.
i'm pretty new at this. i unlocked my phone way back over a year ago, but didn't do much other than add a bunch of programs and emulators. never flashed the rom....until yesterday night.
now i have IPL & SPL 3.08, Radio 2.71.11, OS 10.0.0.10 (i think) and flashed with SNN Diamond.
i'm having two problems (so far anyways):
1. bluetooth is not working right. i can connect to other phones. i can connect to the car bluetooth system and i can hear other people. but they can't hear me. this is a pretty big deal because i need to use bluetooth! how can i fix this problem?
2. this is not essential but it's annoying. when i hang up a call, i can't press "call" from the same screen (i.e. redial) because nothing will happen. it doesn't matter if i press the call button on screen or the actual hard button, the dialer wont call unless i go into phone book or history or otherwise enter the a number. just can't redial how do i fix this?
any help would be greatly appreciated!
Click to expand...
Click to collapse
Hi,
1. Try using other bluetooth device and make sure it is working in other device. Make sure "Receive all incomming beams" is ticked ( i.e Go to Start Manu -> Settings -> Connection Tab -> Click Beam and tick "Receive all incomming beams" then OK )
2. Use phone canvas. I think it takes mode memory but it is very good.
See this link
Plz Reply
Thanks
Srikanth.K
thanks. got the bluetooth working now
now i'm trying to figure out how to use phone canvas 'cause it's installed but i can't find it anywhere
but now i dont have to remove this ROM
EDIT: so apparently my attempt at installing the skins from the link you gave me are not working (well, they dont show up) because i need to install phonecanvas first? i found the link on the forums and i'm trying to install the file but after taking a while installing it, it ends saying it was unsuccesful...can you help me with that?
Max_Pain said:
thanks. got the bluetooth working now
now i'm trying to figure out how to use phone canvas 'cause it's installed but i can't find it anywhere
but now i dont have to remove this ROM
EDIT: so apparently my attempt at installing the skins from the link you gave me are not working (well, they dont show up) because i need to install phonecanvas first? i found the link on the forums and i'm trying to install the file but after taking a while installing it, it ends saying it was unsuccesful...can you help me with that?
Click to expand...
Click to collapse
Hi,
Go to this link ( by MBarvian ), download and install.
Make your uninstall all the dialer skins if you have installed any..
Bye 4 Now
well the problem is that file wont succesfully install.
i can't remove the dialer skin i have now because it was cooked into the ROM. there's no setting or option anywhere that i can find to remove it. frankly, i love the way it looks. so i'm going to stick with it for now and see if it's not totally unbearable.
if i see i really can't stand not being able to redial i'll get back to this thread. thanks for the help so far
I just updated my Jack to 6.5 (only to get in-call recording option - i've read somewhere they added recording option in call menu). So everything went smooth with update...recovering address book etc.
BUT...
as far as it goes with in-call recording it doesn't work. Same like in wm6.1.
I've tried everything...vito, resco, acr...nothing works... tried "record" in call menu but the recorded files are nowhere to be found (/my docs/my sounds, /my docs/notes, nowhere!!!). I've applied all reg hacks like "2 way in-call recording" etc. and even added registry entries by myself...still no dice. phone is unlocked (done it by myself - forcecellsomething<ATT ISP> is removed)...Anyone has the same problem?
what's the point of adding "record" button if it doesn't work?
maybe i'm missing something...I've updated WM to have record option...if it won't work it's gonna be shame (i see WM 6.5 lags a bit)
Appreciate your help.
Best regards.
ok...I've messed something up. Now I lack "record" in call menu...I've been trying to do some reg tweaks since no one knows what to do.
Can any of you help me now?
Thanks.
Finally I figured it out...those are the changes I made. I hope it's gonna turn out useful for all JACK (i637) users.
I made registry entries as below:
HKLM\Drivers\BuiltIn\RIL DWORD="RingingAddressId" value="0"
HKLM\Drivers\BuiltIn\WaveDev DWORD="VocRecPath" value="2"
HKLM\System\CallRecording DWORD="Enabled" value="1"
HKLM\Software\Microsoft\Voice DWORD="EnableCallRecordMenuItem" value="1"
HKLM\Software\Microsoft\Voice DWORD="AllowInCallRecording" value="1"
With those entries I've been able to record phone call (2-way) using system notes from in-call menu. Notice difference in entries in comparison to other similar tweaks.
Using either resco or vito made some complications...with resco installed I wasn't able to use either system or resco recorder...with vito installed (after uninstalling resco) I managed to record only 1 phone call and then everything stopped working, including system recorder.
Maybe someone will figure it out...I'll try for sure...
Oh...does anyone know how to change notes default folder (\my documents\notes) to something different, for example storage card?
Thanks and cheers!
Hi mykail...
I´m owner of samsung jack (called Messenger Phone in Mexico by carrier TELCEL). I don´t know if AT&T Samsung Jack have diferent registry keys. My phone doesn´t have 2 registry keys (HKLM\System\CallRecording and HKLM\Software\Microsoft\Voice)
I have created those 2 registry keys and followed your instructions for creating all registry entries but i can´t record calls.
Some suggestions...? Thanks in advance
Gabriel López
Well frankly it's all messed up. This method doesn't work for me anymore...I don't know why. I tried to fix it but withouot results...U have to play with registry on your own. Happy modding. Cheers.