flashed with SNN ROM - problem with bluetooth and redial - 8125, K-JAM, P4300, MDA Vario ROM Development

hey guys.
i'm pretty new at this. i unlocked my phone way back over a year ago, but didn't do much other than add a bunch of programs and emulators. never flashed the rom....until yesterday night.
now i have IPL & SPL 3.08, Radio 2.71.11, OS 10.0.0.10 (i think) and flashed with SNN Diamond.
i'm having two problems (so far anyways):
1. bluetooth is not working right. i can connect to other phones. i can connect to the car bluetooth system and i can hear other people. but they can't hear me. this is a pretty big deal because i need to use bluetooth! how can i fix this problem?
2. this is not essential but it's annoying. when i hang up a call, i can't press "call" from the same screen (i.e. redial) because nothing will happen. it doesn't matter if i press the call button on screen or the actual hard button, the dialer wont call unless i go into phone book or history or otherwise enter the a number. just can't redial how do i fix this?
any help would be greatly appreciated!

Max_Pain said:
hey guys.
i'm pretty new at this. i unlocked my phone way back over a year ago, but didn't do much other than add a bunch of programs and emulators. never flashed the rom....until yesterday night.
now i have IPL & SPL 3.08, Radio 2.71.11, OS 10.0.0.10 (i think) and flashed with SNN Diamond.
i'm having two problems (so far anyways):
1. bluetooth is not working right. i can connect to other phones. i can connect to the car bluetooth system and i can hear other people. but they can't hear me. this is a pretty big deal because i need to use bluetooth! how can i fix this problem?
2. this is not essential but it's annoying. when i hang up a call, i can't press "call" from the same screen (i.e. redial) because nothing will happen. it doesn't matter if i press the call button on screen or the actual hard button, the dialer wont call unless i go into phone book or history or otherwise enter the a number. just can't redial how do i fix this?
any help would be greatly appreciated!
Click to expand...
Click to collapse
Hi,
1. Try using other bluetooth device and make sure it is working in other device. Make sure "Receive all incomming beams" is ticked ( i.e Go to Start Manu -> Settings -> Connection Tab -> Click Beam and tick "Receive all incomming beams" then OK )
2. Use phone canvas. I think it takes mode memory but it is very good.
See this link
Plz Reply
Thanks
Srikanth.K

thanks. got the bluetooth working now
now i'm trying to figure out how to use phone canvas 'cause it's installed but i can't find it anywhere
but now i dont have to remove this ROM
EDIT: so apparently my attempt at installing the skins from the link you gave me are not working (well, they dont show up) because i need to install phonecanvas first? i found the link on the forums and i'm trying to install the file but after taking a while installing it, it ends saying it was unsuccesful...can you help me with that?

Max_Pain said:
thanks. got the bluetooth working now
now i'm trying to figure out how to use phone canvas 'cause it's installed but i can't find it anywhere
but now i dont have to remove this ROM
EDIT: so apparently my attempt at installing the skins from the link you gave me are not working (well, they dont show up) because i need to install phonecanvas first? i found the link on the forums and i'm trying to install the file but after taking a while installing it, it ends saying it was unsuccesful...can you help me with that?
Click to expand...
Click to collapse
Hi,
Go to this link ( by MBarvian ), download and install.
Make your uninstall all the dialer skins if you have installed any..
Bye 4 Now

well the problem is that file wont succesfully install.
i can't remove the dialer skin i have now because it was cooked into the ROM. there's no setting or option anywhere that i can find to remove it. frankly, i love the way it looks. so i'm going to stick with it for now and see if it's not totally unbearable.
if i see i really can't stand not being able to redial i'll get back to this thread. thanks for the help so far

Related

frozen boot please help

can someone please help me figure out what the deal is with my phone, it's been working great minus the fact it wont work with activesycn anymore, but today i was at my friends using wifi and surfing the net and using Remote Desktop and it locked up, i rebooted it with the reset button and it sits at the Windows Mobile splash screen, for 45+mins, i havent waiting longer than that, i noticed if i pull the battery, sim, SD out and let it sit, put it all back together, press all the buttons, turn it back on and press buttons while is coming on, itll come on, dont know why i have to press stuff lol but its working, and its done this twice, if my activesync worked i'd re-flash it but this rom hasnt been too bad for me, it's one of the earlier Faria releases of wm6. anyone know what would cause it to freeze up during boot and work Sometimes? or a way to make it boot up for sure w/o doing a hard reset.
i noticed it will boot up if i press some buttons during the first/second splash screen, the HTC one and the one with the version numbers, if the keyboard lights up i know its gunna boot successfully. this is crazy. and annoying.
You might try flashing with Shelltool. I'e never done that but it seems to work.
Have you tried to do a hard reset on it? No flash is required. Also for ActiveSync, go to Start > Settings > Connections > USB to PC and uncheck (or check) the box there and see if ActiveSync starts working for you.
And you can always flash directly to the bootloader (no activesync required) if thats what you want to do. Just turn off the phone, then hold the camera button and turn the phone back on. As long as you see USB above the left softkey you are good to go for flashing a different rom onto your phone. I would strongly suggest if you do this to flash back to an official ROM first (T-Mobile 2.26 is a good one to use) and then flash a custom rom of your choice.
No idea why this would have started, but my guess is something you have recently added has a conflict on your phone. You might want to go to remove programs and remove the last couple of things. Then grab a trial copy of MemMaid and run that to clean up bad registry entries and such. See if the problem goes away.
Good luck!
Ah.. See, I want to flash really bad and try something with the new HTC Touch on it, there are so many roms lol, i don't even know where i saved the file for the one im using now.. but the only problem is, i cannot get the damn thing to sync with activesync, i've tried reinstalling it and unchecking the other box on the phone, no go. i'm sure there is no other way to back everything up is there? :-( i'll try memmaid too just incase that can fix the registry. any specific rom you recommend with HTC Touch ? i text A LOT with my phone so i'm mainly only worried about texting and taking pictures, but i've got the UK rom to install, i heard that is better than my current one.
sintax said:
Ah.. See, I want to flash really bad and try something with the new HTC Touch on it, there are so many roms lol, i don't even know where i saved the file for the one im using now.. but the only problem is, i cannot get the damn thing to sync with activesync, i've tried reinstalling it and unchecking the other box on the phone, no go. i'm sure there is no other way to back everything up is there? :-( i'll try memmaid too just incase that can fix the registry. any specific rom you recommend with HTC Touch ? i text A LOT with my phone so i'm mainly only worried about texting and taking pictures, but i've got the UK rom to install, i heard that is better than my current one.
Click to expand...
Click to collapse
I don't care for the Touch stuff (I assume you are talking the Cube), so I really can't comment on that. You'll have to try that yourself.
Use PIM Backup to backup your SMS, MMS, Calendar, contacts and more to your SD card. You could install it by downloading it directly to your phone (its just a zip file with the exe that you run).
As I said, you can upgrade without activesync. Just go to the bootloader as I described.

Number Keys Don't Work In-Call

Hi All,
This is driving me nuts - posted before in "TNT" discussion but didn't get a response.
I am unable to use any number keys when in a call. Can't "select 1 to reach...blah blah blah" or press "7 to delete this message", etc.
I've installed, re-installed TNT, tried different radios, etc. Only seems to happen with TNT, but would like to keep it as the other features are great.
Anyone have a fix or suggestion? Here are my pertinent stats:
ROM: TNT.1933 TouchFLO Edition
I/SPL: 2.25
Radio: 2.19.11
OS: 11.0.0.1
Any suggestions would be massively appreciated as I do NOT want to have to uninstall TNT again, futz around and re-install (it does seem to work for a short while after doing so, but then stops, and what a pain in the arse!)
Thanks,
-tynk-
This is junk TNT issue!
got same rom and dont have this issue..
you just have to press the left button which says "keypad"
Sorry, should have been more specific, but I've got the flu, so not on my toes!
I can view, press, and even hear the keytones in call, but they do NOT register on the other end. No matter how many times I press "7", and hear the tone, voicemail doesn't hear it (I end up with a full mailbox pretty quick!) Or when trying to "press 1 for...", I can press 1, hear the tone, but the system on the other end doesn't register it.
Okay, it may be "junk TNT issue" (or it may just be related to TNT in that one of the progs bundled in TNT or settings I've ticked is the culprit), but what ROM or fix do you recommend? Not a particularly helpful post? Why bother?
Thanks!
I had the very same problem. Check out this post as he answered the question for me...
ADB100 said:
Yep, I had this issue. The solution is simple however - change the following in the registry:
Code:
[HKLM\Drivers\BuiltIn\RIL]
EnableDTMFSupport=0x0
In previous ROMs it looks like the setting 0x00000001 enabled DTMF support and in this ROM 0x00000000 enables it.... Bit weird but it worked for me.
Andy
Click to expand...
Click to collapse
It worked perfectly for me.
Thanx.
yup that is the only thing it can be
the problem was allready solved ..
dumb
maybe I'm a real dumbass but how (TF do I get into my Qtek's Registry?? I cannot find anything about that in the forum
NEVSKI
Got It!!
I used CeRegeditor and that did the job for me: in registry find DRIVERS\BUILDIN\RIL\ and put EnableDTMFSupport on 0 (it was on 1) strangly after reboot it works for me! (and before you change or open anything first 'unlock registry' in de CeregEditor (tools)
NEVSKI
if you dont know how to get into the registry there is a cab floating around that correct DTMF tones and I think some software. I had this issue on a rom and I downloaded a cab that fixed it. If I find it on my computer I will post it for you. Do a search for DTMF tones.

Automatically add number after call

Hey Guys,
I have a simple question (I think), but can't seem to find the answer...
After calling an unknown number normally my phone asks me if I want to save that number to my contacts. Today however, I wasn't thinking and accidentally clicked "Don't ask me this again" in staid of the "yes" button.
I would like to switch that option back on, but I can't seem to find the option... I've searched in my phone settings, Google and the XDA-Forum.
I'm kinda PPC noobish, so I don't know if this is a standard WM6.1 function or if this is a function backed into the ROM I flashed onto my HTC-Touch (the ShadoW 2.0 ROM by Cloudyfa (http://forum.xda-developers.com/showthread.php?t=363637)).
It's a small thing, but something I find useful to use so I hope someone can give me the answer Thanks in advance!
Anyone?
Can anyone tell me how to do this? I mean, if I can switch it off, there must be a way to switch it back on...

Please help me with my Fuze!!!

I am on my third one and now my 30 days are over so I'm stuck with it and if I return it based on warranty help I get a remanufactured one but I am having some really annoying problems. I have searched these forums but frankly they are very complicated and you all seem very advanced and technical and it's very confusing. I'm hoping someone can lay out in baby steps how to help me with these issues.
1. My folders, and TF3D indicate I have a text message when there are no conversations in there it's completely empty in every folder but it still indicates I have one new text message and it won't clear with a soft reset or anything.
2. Often times my calls go straight to voicemail and do not ring on my phone.
3. I drop a lot of calls
4. Often times my phone will flash and show who is calling but not actually ring even though the sound is completely on.
5. I get a ton of errors that want to report to Microsoft especially the shell32.exe error
6. Often times when I try to connect to the internet it won't work on the Opera browser or IE browser just says can't connect.
7. Often times my email won't download and I get a message saying check in my network connections and the only way it'll fix is if I power the device off.
8. The feature where I can flip it upside down to mute it doesn't work
9. Often times I will click on one spot and it activates something I didn't click.
These are just the ones I can think of off the top of my head. Can someone please help me? I am begging. You can find me on Yahoo at julesthequeen06 if it'd be just easier to tell me I'm a lost cause on chat. Thank you in advance for reading this far.
Julie
BroncosMom said:
I am on my third one and now my 30 days are over so I'm stuck with it and if I return it based on warranty help I get a remanufactured one but I am having some really annoying problems. I have searched these forums but frankly they are very complicated and you all seem very advanced and technical and it's very confusing. I'm hoping someone can lay out in baby steps how to help me with these issues.
1. My folders, and TF3D indicate I have a text message when there are no conversations in there it's completely empty in every folder but it still indicates I have one new text message and it won't clear with a soft reset or anything.
2. Often times my calls go straight to voicemail and do not ring on my phone.
3. I drop a lot of calls
4. Often times my phone will flash and show who is calling but not actually ring even though the sound is completely on.
5. I get a ton of errors that want to report to Microsoft especially the shell32.exe error
6. Often times when I try to connect to the internet it won't work on the Opera browser or IE browser just says can't connect.
7. Often times my email won't download and I get a message saying check in my network connections and the only way it'll fix is if I power the device off.
8. The feature where I can flip it upside down to mute it doesn't work
9. Often times I will click on one spot and it activates something I didn't click.
These are just the ones I can think of off the top of my head. Can someone please help me? I am begging. You can find me on Yahoo at julesthequeen06 if it'd be just easier to tell me I'm a lost cause on chat. Thank you in advance for reading this far.
Julie
Click to expand...
Click to collapse
Have you flashed a new rom, loaded any progams, or done anything beyond out of the box configuring? The easiest answer would be to hard reset the phone and see if that helps.
We need to know some more in-depth info
Carrier:
Rom:
If you haven't tried flashing a rom I highly suggest doing so. This can help with a lot of the problems you are having. For the Stock Rom has a lot of problems.
i wouldnt flash a new rom if its screwing up like this out of the box. what have you installed on your phone? if its doing all these these without any installed programs or mods why have you waited 30 days to do something about it? it seems to me its more of a software issue. try hard resetting and go from there. if its fine, install one program at a time and find out which is causing it. if you have att then i dont think your mute is supposed to work like that, thats a feature you have to install another program to do. i could be wrong but mine doesnt work like that.
I would do a hard reset and clear everything... i would change my time to redirect the call to voice mail to the Max: 30 seconds, I would turn off error reporting because its just a pain in the arse.. the flipping it upside down to mute is the program thats having and issue but like everyone else said what do you have installed on your phone

Unable to make phone calls

Hi,
My girlfriend recently bought an XDA Orbit 2 which has WM 6.5 install on it.
Everything else on the phone works perfectly and without issue but she is unable to make phone calls correctly;
The phone will be able to dial out and establish a connection but no sound can be heard by either party even though both phones say the connection is there.
This can be resolved by a hard reset, however this only last for about 10-20 minutes before we lose all sound once again.
Can anyone shed some light onto this for me?
One thing that always screws up phone calls is the radio on the phone it should be a 1.59.xx.xx to check it go to start => setting => system => Phone Information => Software Information. Will find it there also while you are there what 6.5 rom is she running on it as if its not a stable one it may be worth updating it...
Should the .xx.xx be anything in particular or just stay as .xx.xx?
anything in particular i use the stock one (with the default rom) which is .42.15 any should do the job though...
Ok the radio on it is 1.58.25.14 which im asuming is wrong. How do I change it?
This a custom flash thingy ma bob wont hard reset the phone when you flash it => http://forum.xda-developers.com/showthread.php?t=376119
http://forum.xda-developers.com/showthread.php?t=426203
Is the radio i am using and imo the best for signal/ battery life.
How to do it.
1.Download both
2. Put the nbh file in the same directory as the custom ruu
3. Put the phone into bootloader (Start + OK + Reset whole on bottom, hold the buttons until it show a red green white blue screen)
4. plug it in to computer (let the drivers fully install)
5. Start up the Polaris_Custom_ruu.exe
6. Follow the instructions, shouldnt take too long to go through and flash
7. it will reset and you will have a nice shiny new radio and hopefully no more call problems.
All i will say now is what an idiot for selling the phone in that state... (may actually be the reason it was sold lol)
Im going to sound ike a total idiot now but I have no idea what ruu is or nbh or where to put it or what a bootloader is.
Could you possibly put it in moron speech Chris?
LOL well honestly i thought that i had already done that....
Have a look at the files that you download and then it will be explained.
The RUU is the thing that will do the flashing to the device
The nbh files contains the information of you download the stuff and follow the instructions you will have the result that you want honestly i cant think of a simpler way of doing it
Ive also put 2 screenshots to try to help you (one has a different radio but you get the idea...)
Also give this a read but i feel it may confuse you more..
http://forum.xda-developers.com/showthread.php?t=381600
Its a noobs guide to flashing and has all of the info that you need to have.
It does give one point that it has to have SPL-2.20.Olinex on the screen but i would guess this is there as you already have 6.5 on the phone.
Awesome, thanks chris I will get it done tonight after work and let you know how it goes, if it fails I have no doubt I will be back complaining about my lack of phone savvy.
Hey Chris, just to let you know that it worked perfectly, thank you for your help it was much appricated.
No worries glad that it worked as if it didnt then i would be out of ideas...

Categories

Resources