Cannot create a DUN (Dial Up Connection) 2.03.TX WWE - JAM, MDA Compact, S100 Software Upgrading

As per subject, I'm kindly looking for a solution, since I need to create a Dial Up connection.
Before upgrading to rom 2.0.3tx, itwas very easy. Right now, if I have to create a dial up connection, after I type the phone number, i cannot proceed to the next step.
Any help folks?
ROM 2.03.TX WWE
ROM DATE 07/07/07
RADIO 1.13.00
Protocol 1337.43
Regards and all the best
Ed

Help...
after I upgrade T2.03.TX WWE will other updown, become will never "ERROR 101: CONNECTION ERROR" can that help how so that can return like initialy ?

Related

GENERAL COUNTRY ID ERROR WORKAROUND: IT WORKS ALL DEVICES!!!

Hi,
I read somewhere in this forum the following procedure:
extract the Upgrade.exe file (use WinRAR)
edit the RUU.conf file
Add the following line
[CHECKCEID_TYPE]=1
Save changes
Now run BaUpgradeUt.exe
It will say that it will upgrade to this version.
However when the device enters bootloader mode the upgrade util gives a country error. (Don't panic)
Simply restart BaUpgradeUt.exe while the device is still in it's cradle.
Now it will install without a country error.
TESTED ON QTEK9090 AND IMATE JAM: ALWAYS WORKED !!!
:lol: :lol: :lol: :lol:
bye
Good suggestion, unfortunately it won't work with the 1.11 Finnish ROM.
xdua said:
Good suggestion, unfortunately it won't work with the 1.11 Finnish ROM.
Click to expand...
Click to collapse
Do you know how to flash a 1.11 Finisch rom? Or maybe someone else?
ok what i do to upgrade and works good for me..... i use this file MaUpgradeUt_noID.exe and then follow the steps which italos stated but without editing the RUU.conf file.... so use the mentioned file and follow these steps:
""extract the Upgrade.exe file (use WinRAR)
Now run MaUpgradeUt_noID.exe
It will say that it will upgrade to this version.
However when the device enters bootloader mode the upgrade util gives a country error. (Don't panic)
while it's in the bootloader mode (black screen with some writing in it" Serial v1. or whatever")
Simply run the MaUpgradeUt_noID.exe while the device is still in it's USB cable.
Now it will install without a country error."
and it works in the finnish ROM cuz my device is Imate Jam and i just flashed it this morning with the above steps........
best luck
where i find the file MaUpgradeUt_noID.exe
where can i download it
i look at the forum but can't find it plz help
this solution works with any version!!
the clue is that if the device information is erased, it cannot compare.
crusher said:
this solution works with any version!!
the clue is that if the device information is erased, it cannot compare.
Click to expand...
Click to collapse
thanks a lot :lol: , it worked fine for me, with the test french Rom 1.11
guyz ive got xdaII wm2003se.......want to upgrade to wm2005 getting country error code ?? any idea what should i do ?
thanks
jeetz....
not working in Qtek S100 any idea????
it works on S100 / jam / mda c
i tried several images with several devices!
good job!
crusher said:
this solution works with any version!!
the clue is that if the device information is erased, it cannot compare.
Click to expand...
Click to collapse
I have a hand-me-down Xda II mini, which according to the printing on the case was originally issued by O2, but which currently has the following Dutch Qtek ROM installed on it:
ROM version: 1.13.00 WWE
ROM date: 08/18/05
Radio version: 1.13.00
Protocol version: 1337.43
ExtROM version: 1.12.550 WWE
I'm trying to "upgrade" to the latest O2 ROM version:
ROM: 1.11.00 WWE
Radio: 1.11.00
ExtROM: 1.11.922 WWE
MMS: 2.0.0.22
I've followed the instructions from Italos to the letter (twice), but still keep getting the same Country ID error.
Any suggestions on why this is, and more importantly, on how to fix this?
Thanks,
Daniel

2125 -> QTek ROM -> ERROR [296]: UPGRADE ONLY

I own a SPV C600 (Dutch). Because of the tight security of the latest Dutch ROM for the C600 I flashed it with the latest QTek 8310.
Now I've tried the latest Cingular ROM for the 2125.
Because the Cingular ROM only supports the English language I want to change it back to the QTek ROM again.
But no matter what I do it keeps saying :
---
ERROR [296] : UPGRADE ONLY
This NBF file cannot be used for your Smartphone. Please get newer NBF file.
---
I did raise the number on the image version, removed the Operator field. Also tried to make al the fields exactly like it shows on the "update screen" before flashing.
Anybody able to help me out here?
Common, where are al those smart people
Posted this als on SPV-Developers, seems like I'm the only one with this problem Now I'm stuck with an English C600
i had a similar problem with an englsh c600 spent ages sorting it, what i did is sent the header with a matching operator id. then i changed every number up by one in both version numbers. this didnt work but then when i only changed the second digit in the first version number by one again the rom loaded.
ie
11.1.1.5 > 12.2.2.6 > 12.3.2.6
i suggest just persist with it. otherwise use spv services to unlock your cid then you can load what you want on your phone.
Thanks for your reply!
I'm using the latest Qtek 8300 ROM now. I don't know if it's the best. But at least it's unlocked

Does GPRS work for you on WM6?

Ok, simple really, answer the poll and if GPRS DOES work for you post your EXACT radio version and network provider and IE connection settings as a reply below
Phil
Working after upgrading to radio version 4.1.13.28_02.61.01.
Ukrainian provider UMC.
hmm everything is clear now .
People with radio 4.1 have working GPRS (edge too? )
and with 4.0 not.
How do I upgrade my radio? Should I flash a rom with radio and then come back to WM6 or somehow separately?
Just flash a rom with radio after flashing WM6.
and then go back to WM6..? could you please point me to rom with right radio? and my device (SPV C600) is rather Qtek 8300 or 8310?
I'll package radio version 4.1.13.28_02.61.01 with the update in about an hour.
Will update the first post when I've updated it
Phil
You mean a Tornado WM6 Rom with better radio? Cool!
will i have to do once more to format binfs via teraterm? and then run ruu?
You can actually just upgrade the radio ROM, it wont affect your WM6 OS
i don't have a radio rom
where we can get only radio rom?? because i don't want flash all ROM again
revanmj said:
where we can get only radio rom?? because i don't want flash all ROM again
Click to expand...
Click to collapse
jm012a9749 said that it will be available in an hour
but i understand that he pack radio update with entire rom and i want only radio update
You can find it in this forum, search the Tornado thread, few pages back, I just searched for it yesterday. I am only afraid the link to the radio is down due to inactivity. Well, downloading a 30-40MB file which he packed wouldn't take that long right?
I'm posting an updated ROM with it which should address the Audio issues people are experiencing, also some cabs for T9, Comm manager, Task manager and clear storage. So it IS worth flashing the entire ROM again.
Phil
After update GPRS works ;]
my mobile operator is Orange Romania, radio version is 4.1.xx,and my gprs connection it's working.
I have the updated WM6 ROM with the updated Radio. Both GPRS and Edge is working. But sometimes it can not connect to GRPS and I have to restart all the radio components.
Works with:
Radio 4.1.13.28_02.61.01
KPN netherlands.
Working on Orange and TMob UK, albeit with the GPRS/Voicemail problems described here: http://forum.xda-developers.com/showthread.php?p=1381997&highlight=gprs#post1381997
can someone help me set up my gprs settings for o2. i dont know what my access points are etc.

what is the cause of this problem?

I have got a Turkcell(Turkey GSM operator) branded HTC Kaiser with wm6.0 professional
ROM version: 2.50.480.0 WWE
ROM Date: 03.18.2008
Radio: 1.27.15.32
and something like communication protocol(?) version: 22.51.88.13W.
the problem is, in Turkcell prepaid line type, the command *123# is used for querying the remaining credit. in the official Turkcell branded and shipped HTC ROM, which i gave the versions above, this command gives "unsuccessful" message. the command works for approximately 10-15 min after powering on the device, but after this duration, again the message unsuccessful message given.
what is the cause of this problem? radio, or rom or anything else? can it be solved without changing the rom?
i have tried the official wm6.1 rom, and did not encounter that error. however, that rom does not support Turkish Language so i can not use the Turkish Characters on the hardware keyboard. i wish i have sunnysoft interwrite pro 9.5 full version on wm6.1
thanks...
Well, not entirely the same but me here in Indonesia use Telkomsel postpaid and we have the same operator command *123# to check current month running balance due. I don't have problem at all, wm6 or wm6.1 no difference.
I hardly think it's rom related. Just registry set sumtin'. Unfortunately i don't know which key. But again, maybe i'm wrong and it is ROM related.
in official wm6.1 rom, the command works great. only in the operator shipped ROM
thats more likely network related than handset related
It is not Rom related,more oparator network related,We use here to know current balance *225# and I did try almost every rom here xda developers shipped,cooked,oparator roms and always worked.
I suggest check the link,maybe something to do with oparator setting.
Here;
http://www.turkcell.com.tr/yardim/servisyazilimlari#
regards
you said that's anetwork problem, but if it is a network problem, then how can it be seen only in one version of ROM?
i tried several ROMs including official 6.1, only this rom gave this "failed" message. and this message continues to shown until the device is soft resetted. after a while, again "failed"...

Do I need to upgrade the radio ?

I just upgraded everything with Tomals 8.5 the special build.
At this moment the device info indicates the following:
ROM versiion D.08.50.TML WWE
ROM Date: 02/01/08
Radio version: 1.09.00
Protocol version: 42.42.P8
Are there any incompatibilities between these and Tomals last build ?
I can not make phone calls and I had to remove the battery in order to be able to receive calls.
Can anybody tell me if and what I did something wrong ?
Thank you
PS: the phone is T-Mobile MDA Pro
Have you tested with another SIM card?
I don´t get clear about removing the battery?
As far as I know almost any radio is compatible with Tomal ROM´s (I have tested 1.08,1.14,1.15,1.18 without any problem)
orb3000 said:
Have you tested with another SIM card?
I don´t get clear about removing the battery?
As far as I know almost any radio is compatible with Tomal ROM´s (I have tested 1.08,1.14,1.15,1.18 without any problem)
Click to expand...
Click to collapse
I don't have an other SIM card
I disconnected the battery.
One more strange thing: If I try to access Contacts I get nothing. NADA. The PDA does not take the command.
Apparently whatever is connected with "dial" is not working.
How do I upgrade the radio ?
Thanks a lot
1000QA said:
I don't have an other SIM card
I disconnected the battery.
One more strange thing: If I try to access Contacts I get nothing. NADA. The PDA does not take the command.
Apparently whatever is connected with "dial" is not working.
How do I upgrade the radio ?
Thanks a lot
Click to expand...
Click to collapse
Radio only upgrade can be found in the wiki
good luck
1000QA said:
I just upgraded everything with Tomals 8.5 the special build.
At this moment the device info indicates the following:
ROM versiion D.08.50.TML WWE
ROM Date: 02/01/08
Radio version: 1.09.00
Protocol version: 42.42.P8
Are there any incompatibilities between these and Tomals last build ?
I can not make phone calls and I had to remove the battery in order to be able to receive calls.
Can anybody tell me if and what I did something wrong ?
Thank you
PS: the phone is T-Mobile MDA Pro
Click to expand...
Click to collapse
HI i also had save problem after flashing rom to 6.1 and my radio version was 1.0X. And i wasn't able to receive or make call.... and i upgraded my radio version to 1.15 now it's running good and i also have better reception in compare to raioc version 1.0X...
So i'll suggest to upgrade radio only..
Cheers
I had no problems with 1.09 and no problems with 1.17.

Categories

Resources