No Data Connection - 8125, K-JAM, P4300, MDA Vario ROM Development

Help -- I have had to revert to my Wizard (O2 XDA Mini S G3 version) due to smashing the screen on my XDA Orbit.
I was running the official o2 wm5 ROM. However decided to flash one from this site. I followed all instrcutions and upgraede to IPL/SPL3.08, I used the official T-Mobile WM5 as a base and then flashed the WM6 Titanium v2 rom.
I have had no issues flashing - no error messages etc but the problem that i do have is that there is no data connection and no MMS set up. Is this a feature of the Titanium ROm or have I done somethignn wrong?

i think i have some of ur problems.on a g4 wizard, after flashin wm6v5 rom i can not connect to wap neither with ie or opera. i can connect with yahoo mobile program. weird stuff
before, i had a standard orange spv m3000 rom and it worked. so its a rom problem i guess

I managed to get this sorted - by creating a new connnection - works perfctly now

Related

Any XDAII WM5 for Asia?

As I am using XDAII for 2003se which is 2.0600WWE downloaded in this forum (http://forum.xda-developers.com/viewtopic.php?t=16880). The radio is 1.18 and the bootloader is 1.01. As I can upgrade my rom from 2003 to 2003se without any problem, I would like to upgrade it to WM5 in these few days.
However, I face some problems in my updating.
I have try XDA_WM2k5_2.01a64WWE, XDA_WM2k5_2.01a00WWE, however, I cannot search the phone network after upgrade rom. As I have read some posts before, I know that there may be my radio's problem, so I upgrade my radio also. I have try 1.17, 1.18, 1.08 with these rom. Unlucky, it also cannot search phone network.
So. for the only solution is get back 2003se with "Asia O2 Xda II WM 2003 SE Upgrade" in this forum. I can get my network back.
As the result, I would like to ask that what problem am I facing and what can I do? Is it the problem of bootloader ? or the problem of radio?
And also, there have "Asia upgrade" for WM5? It helps me a lot and I need not to afraid the networking problem.
Please help me. .
location?
you're lucky you can install that file to your XDA2. Mine can't I donno why. Activesync kept on disappearing. Although upgrading to 2003se is not a problem.
yetdy said:
you're lucky you can install that file to your XDA2. Mine can't I donno why. Activesync kept on disappearing. Although upgrading to 2003se is not a problem.
Click to expand...
Click to collapse
waht edition of active sync do you have? to get wm2005 to work it has to be active sync 4.0 or higher and for the newer roms you have to have AS 4.2 or equivalent beta versions
I come from Hong Kong
I am using 4.2 for sync
I'm currently using AS 4.2. The problem is that I couldn't install WM2005 2.01 64 to my himalaya. Once I double click on the installer, AS disappears and an error screen will come out after 10 mins. I also tried installing WM 3.0 but still the same result. I really wanted to try using WM2005 on my himalaya. could you guys help me?
yetdy said:
I'm currently using AS 4.2. The problem is that I couldn't install WM2005 2.01 64 to my himalaya. Once I double click on the installer, AS disappears and an error screen will come out after 10 mins. I also tried installing WM 3.0 but still the same result. I really wanted to try using WM2005 on my himalaya. could you guys help me?
Click to expand...
Click to collapse
hmmn...
you did not read thoroughly...
AS disappear normally...
are you using the hima no id dot exe?
visit the wiki :roll:
Jojo,
I tried installing the following files that I downloaded through this website:
HIM_3.00a.32_WM5_AKU_3_CLEAN
XDA_WM2k5_2.01a64WWE
WM2k5 3.00a64wwe
I understand that AS will disappear the same way as it does when I installed SE. However, what puzzles me is that all of these installers will inform me that there is an error and I could not proceed further with the installation. I even have to restart my laptop because AS couldn't communicate with my himalaya after my attempted installation.
Sorry I'm not well versed with computer language/jargons that's why I could not understand the readme file. I would really appreciate it if you could guide me. Thanks.
at last installed it! I have to re install though. I restored some of my data and it crashed on me.
guys,
I've installed Globe_all.cab to my Himalaya but I still couldn't email or send mms. could somebody help me out please?
CAn anyone tell me that , any version of WM5 is fit to Hong Kong User.
yetdy said:
guys,
I've installed Globe_all.cab to my Himalaya but I still couldn't email or send mms. could somebody help me out please?
Click to expand...
Click to collapse
high what network are you with and are you on contract or pay as you go?
cause i have the settings for o2 contract gprs and also havw the settings for e-mail etc
I'm now able to access my emails. however, MMS is still a problem. Still can't send or receive. I'm using a globe telecom postpaid line here in the philippines. I installed the attached file for the network configuration but still nothing.

how to backup and restoring extenden rom

how to backup and restoring extendend rom
guys i have an i mate jam and i want to change the rom to o2, i downloaded and flash WWE_O2_1.12.00 found in ftp and it works fine herebut i noticed that there is no extended rom included.so i copied my wifes o2 xdamini extedended rom(1.12.920 wwe) by using spritebackup,it works fine my problem is i always have to do the same process everytime i hard reset and doing it again and again really sucks!!! i hope you can help me backup my wifes o2 xdamini extended rom and flash it permanently in my o2 xda mini(b4 it was imate jam).guys i really need your help i don't know if this problem is easy to solve or i just don't understand the different instructions posted in this forum.
tnx

Qtek 9000 strange network problem. 3G can't connect [SOLUTION]

Hello,
Don't know if this was covered as when I had the problem I can't find any solution here or on the internet.
As I am considering sending my Qtek 9000 to get the memory upgraded, I wanted to test and trial out a few WM6 upgrades but I stumbled upon a network problem where the 3G will not connect.
I removed the contents on the Extended ROM and applied Lt.Cmdr.Ivan's ROM as it suited what I needed. Once done I was not able to access 3G but can make phone calls and SMS.
I then reflashed to nncuong's ROM as it had the min stuff and max amount of space for my customisation. Still the network failed..
Then I flashed to Beasty & Laurentius' ROM, and the same thing happened. I applied both the radio and also extROM flashes as well. The radio went smoothly, but the extROM got locked and I was not able to open it... Overwritting now does not work and it will try to install the stuff from the extROM everytime I try a hard reset or reflash of the OS...
Lastly, I finally got it to work when I located the original extROM for the Qtek 9000. Reflashed the extROM to the device and loaded Ivan's ROM and the network came back Some MMS setting problems that was fixed with a registry hack but everything was back to normal and the Universal is now WM6 without any problems.
The extROM now can't be used as a storage at all and it must be kept with the Qtek 9000 original files so this problem does not occur when reflashing or doing a hard reset. using other extROMs will only make this problem come back again.
If anyone needs the original Qtek 9000 extROM let me know and I will load it here.
If it has been posted before or there is already a solution, please ignore the thread.
Thanks
--- EDITED ---
Posted is the attachement for the version 1.3 of the Qtek 9000. Extracting it will provide an EXE file.
1) Connect your Qtek 9000 to the PC and activate bootloader. ( hold light and power while pressing the reset )
2) Once its connected via USB, start the file and it will flash your device to the new ExtROM.
Note it will also replace your custom boot screen.
I have the same problem...
Can you post here the information or data about the extRom?
Thanks you in advance
Posted the attachment and instruction.
If you get the sddaemon can't start, delete it from the startup will resolve the issue.

Newbie with S710 needs advice

Well, bought SPV E650, de-branded and reflashed into official HTC rom, got it unlocked. Ok, put some games on
Now, from my past experience in modding/tweaking electronic gadgets i know, that there is bound to be some sort of "better" way of doing things than that of "official releases".
So my question as a complete n00b in WM, PPC and smartphones is - what do you fo first thing you get your hands on S710 ?
At the moment i'm running HTC official 1.34.405.1 ROM. Are there any better ones ? custom ? faster ? whatever ?
Well first thing to do is read over the Vox wiki page. You can find a link to it in my sig. Learn how the phone works and get comfortable with upgrading and stuff. I'm currently running Dr. Gonzo's windows 6.1 rom which, IMHO, is much better than winmo 6.0. Check it out and see if you like it. You can always downgrade to the HTC official rom if you wish to do so.
I have some stuff on the phone flash at the moment. If i reflash rom will it all be erased ? I'm interested in Java apps/games that i have installed. How do i un-install them so that i have a copy of that for later reinstall after flashing (where are installed java apps, midlets, kept ?)?
Getting an mSD card today, but will store stuff on my pc for time being. I just want to try WM6.1 (preferably without losing my stuff already on the phone.)...
yes everything will be erased when you reflash.
you need to have the .jar files for installing them again.
Like reebzor I'm currently running Dr. Gonzo's Windows Mobile6.1 v1.1 rom and I find it much better than Windows Mobile6. Unfortunately everything that you have got on your phone will be erased when you re flash the ROM. If you have got phone numbers on your phone, and SMS messages that you want to keep then download a a copy of Jeyo Mobile companion, it's not free but the time limited trial will do to backup your contacts and SMS messages that you have got on your phone prior to re flashing and will also do to alow you to restore your contacts and SMS messages back to your phone after re flashing your phone.
Roland

The logo "Wifi" has disappeared.

hello, I installed "baterry status" on my HTC P3650 (WM6.1 pro). But programm windows of wifi connection has disappeared. I can not have page where I chose the wifi network. The logo "Wifi" in demarer / parameter / connections has disappeared. Either reinstalling programm windows or using a program like "Hitchhiker" (the latter is not compatible with WM6.1). I want a free software.
Thank you.
Sorry for my english, I'm french...
up ! please
up .
It kinda seems like some program got your WiFi settings screwed. Hard-reset should help.
Sorry. But I have already tried. This does not work! Have you any other ideas?
Thank you
If using any cooked ROM - revert back to the stock ROM (including the radio ROM) and try it again. If it doesn't work after hard reset on the stock ROM - use your warranty, you've got a faulty hardware.
it's ok. I flash my rom with udk R0 and my cruise is good.Thanks.

Categories

Resources