As I am using XDAII for 2003se which is 2.0600WWE downloaded in this forum (http://forum.xda-developers.com/viewtopic.php?t=16880). The radio is 1.18 and the bootloader is 1.01. As I can upgrade my rom from 2003 to 2003se without any problem, I would like to upgrade it to WM5 in these few days.
However, I face some problems in my updating.
I have try XDA_WM2k5_2.01a64WWE, XDA_WM2k5_2.01a00WWE, however, I cannot search the phone network after upgrade rom. As I have read some posts before, I know that there may be my radio's problem, so I upgrade my radio also. I have try 1.17, 1.18, 1.08 with these rom. Unlucky, it also cannot search phone network.
So. for the only solution is get back 2003se with "Asia O2 Xda II WM 2003 SE Upgrade" in this forum. I can get my network back.
As the result, I would like to ask that what problem am I facing and what can I do? Is it the problem of bootloader ? or the problem of radio?
And also, there have "Asia upgrade" for WM5? It helps me a lot and I need not to afraid the networking problem.
Please help me. .
location?
you're lucky you can install that file to your XDA2. Mine can't I donno why. Activesync kept on disappearing. Although upgrading to 2003se is not a problem.
yetdy said:
you're lucky you can install that file to your XDA2. Mine can't I donno why. Activesync kept on disappearing. Although upgrading to 2003se is not a problem.
Click to expand...
Click to collapse
waht edition of active sync do you have? to get wm2005 to work it has to be active sync 4.0 or higher and for the newer roms you have to have AS 4.2 or equivalent beta versions
I come from Hong Kong
I am using 4.2 for sync
I'm currently using AS 4.2. The problem is that I couldn't install WM2005 2.01 64 to my himalaya. Once I double click on the installer, AS disappears and an error screen will come out after 10 mins. I also tried installing WM 3.0 but still the same result. I really wanted to try using WM2005 on my himalaya. could you guys help me?
yetdy said:
I'm currently using AS 4.2. The problem is that I couldn't install WM2005 2.01 64 to my himalaya. Once I double click on the installer, AS disappears and an error screen will come out after 10 mins. I also tried installing WM 3.0 but still the same result. I really wanted to try using WM2005 on my himalaya. could you guys help me?
Click to expand...
Click to collapse
hmmn...
you did not read thoroughly...
AS disappear normally...
are you using the hima no id dot exe?
visit the wiki :roll:
Jojo,
I tried installing the following files that I downloaded through this website:
HIM_3.00a.32_WM5_AKU_3_CLEAN
XDA_WM2k5_2.01a64WWE
WM2k5 3.00a64wwe
I understand that AS will disappear the same way as it does when I installed SE. However, what puzzles me is that all of these installers will inform me that there is an error and I could not proceed further with the installation. I even have to restart my laptop because AS couldn't communicate with my himalaya after my attempted installation.
Sorry I'm not well versed with computer language/jargons that's why I could not understand the readme file. I would really appreciate it if you could guide me. Thanks.
at last installed it! I have to re install though. I restored some of my data and it crashed on me.
guys,
I've installed Globe_all.cab to my Himalaya but I still couldn't email or send mms. could somebody help me out please?
CAn anyone tell me that , any version of WM5 is fit to Hong Kong User.
yetdy said:
guys,
I've installed Globe_all.cab to my Himalaya but I still couldn't email or send mms. could somebody help me out please?
Click to expand...
Click to collapse
high what network are you with and are you on contract or pay as you go?
cause i have the settings for o2 contract gprs and also havw the settings for e-mail etc
I'm now able to access my emails. however, MMS is still a problem. Still can't send or receive. I'm using a globe telecom postpaid line here in the philippines. I installed the attached file for the network configuration but still nothing.
Related
Hello,
I have just downloaded the official new rom v1.11.
When I want to upgrade it, I get an error regarding the ID country !
I don't understand why... I got the rom from the official website (Thailand section since I bought the mini in Thailand but the ROM is for Asian countries and it should not be the problem).
How to solve this problem?
Thanks a lot.
I upgrade my O2 mini completly by using offical O2 firmware.But i try two times. I think the meaning of "reset" is hard reset then let the O2 goes back the original setting before upgrade.
After upgrade, the storage still has 7Mb, not 27Mb. Who can give me a comment???
GPRS problem
Hi,
Oh finally I found a solution on this website...
http://forum.xda-developers.com/viewtopic.php?t=18550&start=25
Now the ROM updated.
But I got a new problem, with GPRS.
I can connect to GPRS but once I'm connected, I don't have anymore the possibility to disconnect like before with the previous ROM.
*** ROGER 123, what is exaclty the problem with the storage? You are talking about the RAM or the free space in the ROM?
I guess what you mean but not sure... After a hard reset .... additional softs will be intsalled (3 seconds and...). Just make a soft reset before the process and then you don't have these extra softwares so that you have 7 Mb more available in RAM.
Have a nice day.
roger123 said:
I upgrade my O2 mini completly by using offical O2 firmware.But i try two times. I think the meaning of "reset" is hard reset then let the O2 goes back the original setting before upgrade.
After upgrade, the storage still has 7Mb, not 27Mb. Who can give me a comment???
Click to expand...
Click to collapse
Hey2, this official rom, you can't get 27 Mb of storage. If you want get the 27 MB Storage you must cooked the official rom first.
youcan try this link
http://forum.xda-developers.com/viewtopic.php?p=122608#122608
O2 mini Rom upgrade help-
Hi,
I'm new here...Just downloaded Rom upgrade from www.seeo2.co and tried upgrading. (ma_o2asia_11100_922_11100_ship.exe)
HELP! At stage 2. Updating Extended Rom.... the process just freeze at 15% and refuse to complete!!
I've also read other upgrade options and downloaded "MaUpgradeUt_noID.exe" and followed instructins but same thing each time..
Tried at least 10 times, each time stuck at 15%
Any known solution out there pls??
rgds,
Hi,
I'm new here...Just downloaded Rom upgrade from www.seeo2.co and tried upgrading. (ma_o2asia_11100_922_11100_ship.exe)
HELP! At stage 2. Updating Extended Rom.... the process just freeze at 15% and refuse to complete!!
I've also read other upgrade options and downloaded "MaUpgradeUt_noID.exe" and followed instructins but same thing each time..
Tried at least 10 times, each time stuck at 15%
Any known solution out there pls??
rgds,
may be you can try upgrade using WWE version..
Call O2 technical support. The number is on their www.seeo2.com.
Arto
solved
Hi all,
Thks...prob solved after changing to my notebook to sync.
Strange but true, just would not work with my desktop.
rgds,
Newbie here,
Flashed my Tmobile SDA (Tornado) to imate_sp5m_wwe_2.6.331.2. Everything looks good, Bluetooth does not work.
Accessing the BT via Comm Manager -> BT Setting, any changes I do for "Discoverable or ON" gives me a message "The settings could not be saved"
BT was working earlier with TMobile ROM. Any help is appreciated..
Thanks
P.S Any place from where I can download the Tmobile original ROM ?
Just wondering, why do you still flash WM5 when you have WM6?
Get WM6, read the tutorial on my signature
Installed WM6
Kar Hoe, Thanks,
I went ahead an completed the install. Looks good, How do I get Windows Live Messenger ??
BTW, BT is still not working, not sure why
I had similar behavior with my older Qtek 8010. One day I found out bluetooth doesn't work anymore. I tried to hard-reset, re-flash, nothing helped, still getting same messages as you. I thought it's broken so I bought Qtek 8310. After some time WM6 for Typhoon appeared so I flashed it to my no more used Qtek 8010 just for curiosity how it looks. I tried to switch bluetooth on and to my surprise it worked without any problem. But don't ask me why
i had this problem but it only stayed till i soft reseted the device.
sunjay said:
Kar Hoe, Thanks,
I went ahead an completed the install. Looks good, How do I get Windows Live Messenger ??
BTW, BT is still not working, not sure why
Click to expand...
Click to collapse
Get it from phil's extras folder
http://www.jm012a9749.pwp.blueyonder.co.uk/Extras.zip
karhoe said:
Get it from phil's extras folder
http://www.jm012a9749.pwp.blueyonder.co.uk/Extras.zip
Click to expand...
Click to collapse
Do the files work on Typhoon as well
They are normal WM6 apps, all should work
Err, hearing the word Typhoon in Tornado forum doesn't sound good, let me warn you. Tornado is not compatible with Typhoon. Don't flash Typhoon into Tornado and vice versa
karhoe said:
They are normal WM6 apps, all should work
Err, hearing the word Typhoon in Tornado forum doesn't sound good, let me warn you. Tornado is not compatible with Typhoon. Don't flash Typhoon into Tornado and vice versa
Click to expand...
Click to collapse
Sorry, I shall be careful next time
I didn't flash the roms interchangibly
Thanks for your help
neitin said:
Sorry, I shall be careful next time
I didn't flash the roms interchangibly
Thanks for your help
Click to expand...
Click to collapse
Lol, you wanted to flash Typhoon ROM into Tornado? Thank god you didn't, or we will have another 'white screen problem' thread
Live Messenger Installed. whats next recommendations
Kar hoe
Installed the live messenger, I see a lot of *cab files, most of the names are meaningful, but some are not,
whats the diff between t9 and xt9 ? I also plan to use VOIP, should i install some of the voip cabs ?
the other question is on reset to see if I overcome the BT problem, if I hard reset, will I loose the cab and the rom installed, I dont mind loosing my data as I have a backup and resync faster. Please advice
Thanks, appreciate all your help
they are different t9 softwares, simple as that, user preference, t9 is the normal one, where else xt9 is slight different
If you are using Andot's PEE, you just need to configure the xml files,
http://forum.xda-developers.com/showthread.php?t=324472
If you hard reset, you will lose your data only, you will still have the cabs and ROM, as long as the cabs are in your storage card
unable to install application. Please update your device ROM to the required version before trying again.
TomTom Navigator v6.032 build 8351 (TYTN II)
Duttys_Official_WM6.1_Release
And I have tested with the 2 newest radio roms.
who can help me?
I havn't got any problems. Mine just installed.
Same problem here.
nobody can help us ?
I was also able to install Tom Tom with NO issues. I can only imagine something device specific for you guys. Maybe try re-flashing? And of course don't forget to do a Hard Reset after flashing, before installing anything.
Good luck...I would be lost (literally) without Tom Tom
This has nothing to do with the the problem need instructions as how to use the map I have which is not recognized by tomtom. I have tt home. Where would I install it on the comp so the map gets recognized,
remb0 said:
unable to install application. Please update your device ROM to the required version before trying again.
TomTom Navigator v6.032 build 8351 (TYTN II)
Duttys_Official_WM6.1_Release
And I have tested with the 2 newest radio roms.
who can help me?
Click to expand...
Click to collapse
Go to the file section in my signature, download tt60328351 from the cab file. Copy it to your device and install. I know this one works as I use it and it is the one that came with the stock Kaiser. You must purchase the maps from TomTom.
Nevermind, I got it up and working! thanks anyways
Hi, ive flashed a few handsets before (wallaby x2, alpine and a wizard) and had no problems but for some reason cannot even get off the first hurdle with my t-mobile vario iv and cant even unlock the dam thing to flash a custom rom! ive looked at post after post and downloaded so many programs like hard spl and nothing works. the programs ether wont even open or they fail half way through the process but havent bricked my phone so far (fingers and toes crossed!) please could someone help me with what unlocking software i need, what radio rom and main rom i should be using. Really i would like to try a standard wm6.5 rom and then try custom roms after but like what nrg have done if stock is not avaliable. its model is RAPH300 part no- 99HFP013-00
my current rom version is 1.69.110.8 WWE
my current radio version is 1.02.25.19
protocol version 52.33.25.17U
my email is [email protected] if you prefer to help via email
thanks in advance everyone, steve.
Anyone out there?
Ensure you have hard SPL'd your handset before trying to flash ANY custom roms
before you do that, see if there is an updated T-Mobile rom, see if that update will work, if that update works without any glitches then it'll be alright, if you get an error with an official update then possibly something wrong with either your pc setup or the handset
if your using vista, make sure you've got the windows mobile device centre installed, if not, you need to go to microsoft and download it
if using windows xp, make sure you've got the latest activesync installed.
ensure the cable your using is not faulty by trying it with a different cable
and good luck!
duke_stix said:
Ensure you have hard SPL'd your handset before trying to flash ANY custom roms
before you do that, see if there is an updated T-Mobile rom, see if that update will work, if that update works without any glitches then it'll be alright, if you get an error with an official update then possibly something wrong with either your pc setup or the handset
if your using vista, make sure you've got the windows mobile device centre installed, if not, you need to go to microsoft and download it
if using windows xp, make sure you've got the latest activesync installed.
ensure the cable your using is not faulty by trying it with a different cable
and good luck!
Click to expand...
Click to collapse
thanks for trying to help, have you ever read something over and over and repeatedly missed something in it? i think thats what i did wrong. i did not see the bit about removing my sim card even though i had read the noobs guide again and again. removed my sim and bosh, spl worked! then everything else was a breeze and i am now running the energy 3.0 wm6.5 rom! havent flashed the radio yet but will probably do that today. the energy rom is a vast improvement on my stock 6.1 rom in many areas and seems to have improved camera performance quite a lot (not quality) and the menus are going to be great once i have got used to the totally different interface. does anyone have any sugestions on other roms tha may be better than this one?
Hi there
Glad to hear you got it working!
I am personally using NATF's WM6.1 lite touch pro rom as all i look for in a rom is stability as i actually use my phone for phone/text purposes and there is nothing more annoying than a hanging phone when your trying to quickly reply to a text message!