unable to install application. Please update your device ROM to the required version before trying again.
TomTom Navigator v6.032 build 8351 (TYTN II)
Duttys_Official_WM6.1_Release
And I have tested with the 2 newest radio roms.
who can help me?
I havn't got any problems. Mine just installed.
Same problem here.
nobody can help us ?
I was also able to install Tom Tom with NO issues. I can only imagine something device specific for you guys. Maybe try re-flashing? And of course don't forget to do a Hard Reset after flashing, before installing anything.
Good luck...I would be lost (literally) without Tom Tom
This has nothing to do with the the problem need instructions as how to use the map I have which is not recognized by tomtom. I have tt home. Where would I install it on the comp so the map gets recognized,
remb0 said:
unable to install application. Please update your device ROM to the required version before trying again.
TomTom Navigator v6.032 build 8351 (TYTN II)
Duttys_Official_WM6.1_Release
And I have tested with the 2 newest radio roms.
who can help me?
Click to expand...
Click to collapse
Go to the file section in my signature, download tt60328351 from the cab file. Copy it to your device and install. I know this one works as I use it and it is the one that came with the stock Kaiser. You must purchase the maps from TomTom.
Nevermind, I got it up and working! thanks anyways
Related
As I am using XDAII for 2003se which is 2.0600WWE downloaded in this forum (http://forum.xda-developers.com/viewtopic.php?t=16880). The radio is 1.18 and the bootloader is 1.01. As I can upgrade my rom from 2003 to 2003se without any problem, I would like to upgrade it to WM5 in these few days.
However, I face some problems in my updating.
I have try XDA_WM2k5_2.01a64WWE, XDA_WM2k5_2.01a00WWE, however, I cannot search the phone network after upgrade rom. As I have read some posts before, I know that there may be my radio's problem, so I upgrade my radio also. I have try 1.17, 1.18, 1.08 with these rom. Unlucky, it also cannot search phone network.
So. for the only solution is get back 2003se with "Asia O2 Xda II WM 2003 SE Upgrade" in this forum. I can get my network back.
As the result, I would like to ask that what problem am I facing and what can I do? Is it the problem of bootloader ? or the problem of radio?
And also, there have "Asia upgrade" for WM5? It helps me a lot and I need not to afraid the networking problem.
Please help me. .
location?
you're lucky you can install that file to your XDA2. Mine can't I donno why. Activesync kept on disappearing. Although upgrading to 2003se is not a problem.
yetdy said:
you're lucky you can install that file to your XDA2. Mine can't I donno why. Activesync kept on disappearing. Although upgrading to 2003se is not a problem.
Click to expand...
Click to collapse
waht edition of active sync do you have? to get wm2005 to work it has to be active sync 4.0 or higher and for the newer roms you have to have AS 4.2 or equivalent beta versions
I come from Hong Kong
I am using 4.2 for sync
I'm currently using AS 4.2. The problem is that I couldn't install WM2005 2.01 64 to my himalaya. Once I double click on the installer, AS disappears and an error screen will come out after 10 mins. I also tried installing WM 3.0 but still the same result. I really wanted to try using WM2005 on my himalaya. could you guys help me?
yetdy said:
I'm currently using AS 4.2. The problem is that I couldn't install WM2005 2.01 64 to my himalaya. Once I double click on the installer, AS disappears and an error screen will come out after 10 mins. I also tried installing WM 3.0 but still the same result. I really wanted to try using WM2005 on my himalaya. could you guys help me?
Click to expand...
Click to collapse
hmmn...
you did not read thoroughly...
AS disappear normally...
are you using the hima no id dot exe?
visit the wiki :roll:
Jojo,
I tried installing the following files that I downloaded through this website:
HIM_3.00a.32_WM5_AKU_3_CLEAN
XDA_WM2k5_2.01a64WWE
WM2k5 3.00a64wwe
I understand that AS will disappear the same way as it does when I installed SE. However, what puzzles me is that all of these installers will inform me that there is an error and I could not proceed further with the installation. I even have to restart my laptop because AS couldn't communicate with my himalaya after my attempted installation.
Sorry I'm not well versed with computer language/jargons that's why I could not understand the readme file. I would really appreciate it if you could guide me. Thanks.
at last installed it! I have to re install though. I restored some of my data and it crashed on me.
guys,
I've installed Globe_all.cab to my Himalaya but I still couldn't email or send mms. could somebody help me out please?
CAn anyone tell me that , any version of WM5 is fit to Hong Kong User.
yetdy said:
guys,
I've installed Globe_all.cab to my Himalaya but I still couldn't email or send mms. could somebody help me out please?
Click to expand...
Click to collapse
high what network are you with and are you on contract or pay as you go?
cause i have the settings for o2 contract gprs and also havw the settings for e-mail etc
I'm now able to access my emails. however, MMS is still a problem. Still can't send or receive. I'm using a globe telecom postpaid line here in the philippines. I installed the attached file for the network configuration but still nothing.
Hey All,
I just installed those updated drivers on my wizzard with mfrazzz's Crossbow Reloaded 1.5 rom. After a reboot I can't start bluetooth anymore. Are there some regkeys I have to change to get this working? I can uninstall the package to see if it will work again with the bluetooth drivers in the Crossbow Reloaded 1.5 rom, but that'll be the easiest way.
Hopefully anyone can help me.
Thanks in advance.
The CAB file in question
TheWizzard2203 said:
Hey All,
I just installed those updated drivers on my wizzard with mfrazzz's Crossbow Reloaded 1.5 rom. After a reboot I can't start bluetooth anymore. Are there some regkeys I have to change to get this working? I can uninstall the package to see if it will work again with the bluetooth drivers in the Crossbow Reloaded 1.5 rom, but that'll be the easiest way.
Hopefully anyone can help me.
Thanks in advance.
The CAB file in question
Click to expand...
Click to collapse
you are in HTC Universal forum here right????
Whooops, wrong forum. Ships.....
Newbie here,
Flashed my Tmobile SDA (Tornado) to imate_sp5m_wwe_2.6.331.2. Everything looks good, Bluetooth does not work.
Accessing the BT via Comm Manager -> BT Setting, any changes I do for "Discoverable or ON" gives me a message "The settings could not be saved"
BT was working earlier with TMobile ROM. Any help is appreciated..
Thanks
P.S Any place from where I can download the Tmobile original ROM ?
Just wondering, why do you still flash WM5 when you have WM6?
Get WM6, read the tutorial on my signature
Installed WM6
Kar Hoe, Thanks,
I went ahead an completed the install. Looks good, How do I get Windows Live Messenger ??
BTW, BT is still not working, not sure why
I had similar behavior with my older Qtek 8010. One day I found out bluetooth doesn't work anymore. I tried to hard-reset, re-flash, nothing helped, still getting same messages as you. I thought it's broken so I bought Qtek 8310. After some time WM6 for Typhoon appeared so I flashed it to my no more used Qtek 8010 just for curiosity how it looks. I tried to switch bluetooth on and to my surprise it worked without any problem. But don't ask me why
i had this problem but it only stayed till i soft reseted the device.
sunjay said:
Kar Hoe, Thanks,
I went ahead an completed the install. Looks good, How do I get Windows Live Messenger ??
BTW, BT is still not working, not sure why
Click to expand...
Click to collapse
Get it from phil's extras folder
http://www.jm012a9749.pwp.blueyonder.co.uk/Extras.zip
karhoe said:
Get it from phil's extras folder
http://www.jm012a9749.pwp.blueyonder.co.uk/Extras.zip
Click to expand...
Click to collapse
Do the files work on Typhoon as well
They are normal WM6 apps, all should work
Err, hearing the word Typhoon in Tornado forum doesn't sound good, let me warn you. Tornado is not compatible with Typhoon. Don't flash Typhoon into Tornado and vice versa
karhoe said:
They are normal WM6 apps, all should work
Err, hearing the word Typhoon in Tornado forum doesn't sound good, let me warn you. Tornado is not compatible with Typhoon. Don't flash Typhoon into Tornado and vice versa
Click to expand...
Click to collapse
Sorry, I shall be careful next time
I didn't flash the roms interchangibly
Thanks for your help
neitin said:
Sorry, I shall be careful next time
I didn't flash the roms interchangibly
Thanks for your help
Click to expand...
Click to collapse
Lol, you wanted to flash Typhoon ROM into Tornado? Thank god you didn't, or we will have another 'white screen problem' thread
Live Messenger Installed. whats next recommendations
Kar hoe
Installed the live messenger, I see a lot of *cab files, most of the names are meaningful, but some are not,
whats the diff between t9 and xt9 ? I also plan to use VOIP, should i install some of the voip cabs ?
the other question is on reset to see if I overcome the BT problem, if I hard reset, will I loose the cab and the rom installed, I dont mind loosing my data as I have a backup and resync faster. Please advice
Thanks, appreciate all your help
they are different t9 softwares, simple as that, user preference, t9 is the normal one, where else xt9 is slight different
If you are using Andot's PEE, you just need to configure the xml files,
http://forum.xda-developers.com/showthread.php?t=324472
If you hard reset, you will lose your data only, you will still have the cabs and ROM, as long as the cabs are in your storage card
Hi,
i have O2 Exec,
flashed this version of WM6
Jwrightmcps Crossbow ROM Update 2.12.06 WWE
http://forum.xda-developers.com/showthread.php?t=343736
it works ok, but doesn't see my 8Gb SDHC card (actually i see only 3,8GB)
I tried to flash another roms, but my uni is not booting after install. Only this one (Jwrightmcps Crossbow ROM Update 2.12.06 WWE) is working. When i try to boot my phone O2 logo is displaying and thats it.
Question: is it enough to download and install new rom, or i need to install somethink else? I tried also to install 6.1 rom, but it doesnt boot my phone also.
If i need to install somethink else, can you add link also
Thanks for help.
I have one idea what i did wrong.
When i flashed new rom i started it ehat windows was launched (not from bootloader). Is it possible that this way i break my radio and after that my new rom won't start?
i looked wiki, but i didn't get answer
Thank you for not anwering
Still have same problem
hey hey.
I tried the Simunlocker by jotach
Everything works fine. I get the code to enter, but the field for the 8 digit PIN isn´t there because I only can make Emergency calls...
I thougt it could be ROM problem and I´ve testet all HTC ROM till 1.57. and Installed the radio 1.0
No success.
I read about more people with this problem and without success. Is there another way to unlock? Or is this Phone to new?
Any comment is welcome!
Look on the vert first post under sticky. Unlock your Kaiser is o simple. I test my unlock Tilt with T-Mobile SIM I pop off my iphone. Wow, it works!!!!
Now, I can switch my Tilt with my iphone when ever I need it!!
farmer.joe said:
hey hey.
I tried the Simunlocker by jotach
Everything works fine. I get the code to enter, but the field for the 8 digit PIN isn´t there because I only can make Emergency calls...
I thougt it could be ROM problem and I´ve testet all HTC ROM till 1.57. and Installed the radio 1.0
No success.
I read about more people with this problem and without success. Is there another way to unlock? Or is this Phone to new?
Any comment is welcome!
Click to expand...
Click to collapse
Are you using a 6.1 ROM or 6.0 ROM? I had the same problem with a 6.1 ROM. I was forced to downgrade to a 6.0 ROM, Load the simunlocker, then load up the 6.1 ROM again. Hope this helps, Let me know how it goes.
Hi.
I appear to be having problems and my phone now thinks there is no sim inserted!!
#5. After you unpacked the download you see directories "step1" and "step2". Go into directory "step1" and run KaiserCustomRUU.exe.
This will flash the special patched radio rom. Follow the instructions until it is finished.
Everything was fine up to here!
Note that you can also skip step 6. and proceed with step 7.
#6. Power off your Kaiser and insert a 'strange' SIM, i.e. a SIM from another provider than the one your phone is locked to.
After changing sim as per #6, it now says “Insert SIM card”. – not proceeded to stage #7 yet.
#7. Once Windows Mobile has booted up it will (usually after you have entered the usual 4-digit PIN) show a window called "Simlock" and a textbox where you can enter a 8-digit unlockcode. Now perform a soft reset by pressing the reset button *but* at the same time keep the camera button pressed. If you did it well you will be back in bootloader mode and you see the tri-color screen. The best technique is to press and hold the camera button first and then shortly press the reset button with the stylus.
Anyone got any ideas, as my phone now does not recognise either my original sim or my spare sim.
I see there are a number of people who have experienced this problem.
My phone is the MDA Vario 3 on T-Mobile.
I didn't take a note of the correct ROM reference, only the bottom line which was "P 1.56.110.4", so I wouldn't know which ROM to flash it back to at the end.
All other functions are fine. WiFi, GPS and all my settings. I now have an american keyboard, so lost the £ (£) sign.
It will not recognise either my UK T-Mobile sim or my UK 3 sim.
MSanad said:
Are you using a 6.1 ROM or 6.0 ROM? I had the same problem with a 6.1 ROM. I was forced to downgrade to a 6.0 ROM, Load the simunlocker, then load up the 6.1 ROM again. Hope this helps, Let me know how it goes.
Click to expand...
Click to collapse
I tried with 6.0 and 6.1 !! HTC ROM, AT&T ROM dont work for me.
I downloaded them here: http://wiki.xda-developers.com/index.php?pagename=Kaiser_ROMs
No success and i´ve tested lots of them!
I had exactly the same problem. Caused me a right headache, follow these steps:-
You are more than likely running 6.0 or 6.1 rom, you will need to downgrade first to a rom that's 5.xx first. Then run the Simunlocker and it will work and you will notice the icon to click "OK" on the sim entry screen will appear.
You can then reflash back to the rom that you are currently using, but I would suggest flashing dutty's rom as it's the best.
So to recap:-
1) Downgrade to a rom that's 5.xx first
2) Then run Simunlocker.
3) Then reflash to your current rom or Dutty's.
4) Might be wise to make a note of the radio version you are using as well and then reflash this again.
Good luck.
techceptional said:
I had exactly the same problem. Caused me a right headache, follow these steps:-
You are more than likely running 6.0 or 6.1 rom, you will need to downgrade first to a rom that's 5.xx first. Then run the Simunlocker and it will work and you will notice the icon to click "OK" on the sim entry screen will appear.
You can then reflash back to the rom that you are currently using, but I would suggest flashing dutty's rom as it's the best.
So to recap:-
1) Downgrade to a rom that's 5.xx first
2) Then run Simunlocker.
3) Then reflash to your current rom or Dutty's.
4) Might be wise to make a note of the radio version you are using as well and then reflash this again.
Good luck.
Click to expand...
Click to collapse
HEY THX for your fast reply!
do you still have a link where i can download?
If you have it on your HD, would be nice if can upload it to me...
but... iam really happy to hear that someone had same prob
techceptional said:
So to recap:-
1) Downgrade to a rom that's 5.xx first
2) Then run Simunlocker.
3) Then reflash to your current rom or Dutty's.
4) Might be wise to make a note of the radio version you are using as well and then reflash this again.
Good luck.
Click to expand...
Click to collapse
There is no such thing as a WM5 rom for the Kaiser. Your only choice is 6.0 or 6.1.
OK, I'm wrong on the 5x version (i'm a bit of a newbie). To clarify this I flashed Alex's rom to fix the problem (6.0). Quote from Simunlocker:-
Note for WM6.1 users
================
Do not try this on 6.1! You will need to downgrade to 6.0
Farmer Joe - here's the link to the thread - http://forum.xda-developers.com/showthread.php?t=354583
You will need to search for Alex's Flash rom - ver .52 ultraclean (this worked for me). Then run simunlocker, then run Dutty's rom if you want, then flash a later radio rom for better battery life (I'm using 1.64.08.21...)
How do we setup a WIKI for Orange users then? Any ideas - new to me sorry.
techceptional said:
OK, I'm wrong on the 5x version (i'm a bit of a newbie). To clarify this I flashed Alex's rom to fix the problem (6.0). Quote from Simunlocker:-
Note for WM6.1 users
================
Do not try this on 6.1! You will need to downgrade to 6.0
Farmer Joe - here's the link to the thread - http://forum.xda-developers.com/showthread.php?t=354583
You will need to search for Alex's Flash rom - ver .52 ultraclean (this worked for me). Then run simunlocker, then run Dutty's rom if you want, then flash a later radio rom for better battery life (I'm using 1.64.08.21...)
How do we setup a WIKI for Orange users then? Any ideas - new to me sorry.
Click to expand...
Click to collapse
Everythink works fine now!
To all people with same prob... download Alex's v4 UltraClean and MultiMedia ROMs for AT&T and HTC
then flash the Radio ROM 1.0 from Step 1...
Jehaw! My Kaiser is unlocked!
Thanks everybody for your help and thanks to jotach for his great work!
keep up your good work!
Glad you got it sorted! Enjoy your unlocked Kaiser
NotATreoFan said:
There is no such thing as a WM5 rom for the Kaiser. Your only choice is 6.0 or 6.1.
Click to expand...
Click to collapse
Actually he is correct. I assume he's talking 5.0 CE Version, which indeed the standard WM6.0 Roms are. WM6.1 is CE OS 5.2.
That is the embeded CE version that WM is based upon.
CE 5.0 or 5.1 = WM6.0
< CE 5.2 = WM6.1