Related
Here's a Qtek 8310 latest radio ROM (2.47.01)
ftp://xdaupload:[email protected]/Tornado/8310 radio only/8310_024701_RADIO.exe
I dont know if it's vendor indipendent
It will not affect your data od other ROM parts, you can flash it to any AKU2 ROM... might fix some of your network problems (searching, signal strenght, gprs problems in roaming etc)
Here's an older version on Modaco: (2.37.01)
http://www.modaco.com/Tornado-Radio-Update-411319-023701-t244555.html
Enjoy!
Thanks for posting.
This Radio is from QTEK IU build. YOu can flash it to any vendor Tornado (Hertz) device. startup screen screen says QTEK IU build only. obviously, this one is not for production environment.
Just wondering, do you know what is new or what has been changed with this ROM? Thank you
this one has been recieved by a european dealer as a latest radio alltogether to correct issue one big vip customer had (perhaps microsoft europe itself)
if the red letters dont bother you, use the radio, it's good.. it can always be reflashed to original
about the changes, Ive been told there's no relese note with fixes, but it contains all updates after 2.09 radio, therefor, the 2.21 corrections are all there, as well as 2.37
jsp_m said:
Here's a Qtek 8310 latest radio ROM (2.47.01)
ftp://xdaupload:[email protected]/Tornado/8310 radio only/8310_024701_RADIO.exe
I dont know if it's vendor indipendent
It will not affect your data od other ROM parts, you can flash it to any AKU2 ROM... might fix some of your network problems (searching, signal strenght, gprs problems in roaming etc)
Here's an older version on Modaco: (2.37.01)
http://www.modaco.com/Tornado-Radio-Update-411319-023701-t244555.html
Enjoy!
Click to expand...
Click to collapse
Does this radio update work on the i-mate SP5?
yes, it does work. NO probs there..
jsp_m said:
......
if the red letters dont bother you, use the radio, it's good.. it can always be reflashed to original............
Click to expand...
Click to collapse
You can always change the startup screen to what ever you want - to avoid the red letters there.
beta rom aku3 for tornado?
since i noticed that you see alot of aku3 beta roms for other htc devices ,i wonder if the smae sources could help us out on beta aku3 for tornado?
Can anyone give an advice how to flash RADIO only for Qtek 8300 with Russian flash 2.0.10.0 (latest)?
When I'm trying to flash radio from the 1st post of topic, I 'm finding message "Invalid Vendor ID" (OK, I didn't apply SuperSID unlock - just do not want to do it). After editing file nk.bkf by means of TyphoonNBFTool (0.4) - I receive a message "Upgrade only" :shock:
Qteck radio upgrade helped my SDA
SecureGSM said:
yes, it does work. NO probs there..
Click to expand...
Click to collapse
I've got a T-Mobile SDA with the i-mate SP5 ROM version 2.0.8.0. I just flashed the Qtek radio upgrade 02.47.01 and it seems to have made quite an improvement. Not only does it spend less time searching, but it seems to hold on to weak signals better too. Just thought I'd put in my report. Thanks for posting the ROM.
Jeff
Wow
What a wonderful improvement in signal!!! I use cingular service for my qtek 8300, and it would always bounce between 'Suncom', and 'home service' usually with 1-2 bars indoors (with the qtek 8300 aku2.0 ROM). Now, it is locked solid on Cingular with at least 3 bars. AWESOME!!! THANKYOU!!!
I downloaded and run the file above and it mentions that my:
imate sp5m image version 2.6.331.2 will be updated to
qtek 8310 image version 2.5.322.99.
Anyway, I run it and now I have
radio: 2.47.01
operator: 2.6.331.2
rom: 2.0.8.0
Thanx!
Finally I've flashed my Qtek 8300 with this radio! 10x to TyphoonNBFTools developers
Files for update were uploaded here: http://rapidshare.de/files/36577121/Radio_8310_NoSID.rar.html - this is not premium account, so file will be deleted after 30 days of non-download!
Just download it, extract and launch ROMUpdateUtility.exe
Hope that is will be helpfull for somebody.
how about a beta rom leaked from htc for tornado something like aku2.3 or better
aku2.3 or better rom ,just like all these beta rom s for pocket pc floating around here hwy cant we get one for tornado?
this radio update may be flaky
Hey,
well, my qtek 8300 says that it has better reception (as per my previous post), but I am missing a lot of calls since installing this radio update. Something wierd going on. I reverted to the original (see previous link to Modaco forum), and hopefully that will fix things.
radio update effects
Hey,
I noticed with this new radio update that the 'free memory' on my qtek 8300 decreased about 5MB, from about 24MB to about 19MB, with no programs running. When I reverted to the old radio, this problem went away.
Anyone else notice this?
dm251z said:
I noticed with this new radio update that the 'free memory' on my qtek 8300 decreased about 5MB, from about 24MB to about 19MB, with no programs running. When I reverted to the old radio, this problem went away. Anyone else notice this?
Click to expand...
Click to collapse
Nope. I have 20.95M FREE (and there are Explorer, AlReaderLight and Messaging in RAM).
I have the Cingular 8125, will this Radio upgrade work for me?
ZlydenGL said:
Nope. I have 20.95M FREE (and there are Explorer, AlReaderLight and Messaging in RAM).
Click to expand...
Click to collapse
I had almost 23MB free (with papyrus on the startscreen)
Anyone out there still have this Radio ROM available for download? Or is there a newer one that can be used?
Trying to fix some issue on my wifes SDA.
sounds good. but i've got the latest radio version 4.1.13.28_02.61.01 running on my Dopod 577w. look here: http://www.pxdxa.com/read.php?tid=24816
Two questions:
1. How do I tell what generation my Prophet is? I see a lot of references to G3 and G4 but no information on how to work this out.
2. I currently have the latest i-mate JAMin rom, which is AKU2.0. Is there is a stable AKU2.3 ROM people have been using or is this still "experimental" It's hard to work this out from the threads.
Thanks all.
spaceboy said:
Two questions:
1. How do I tell what generation my Prophet is? I see a lot of references to G3 and G4 but no information on how to work this out.
2. I currently have the latest i-mate JAMin rom, which is AKU2.0. Is there is a stable AKU2.3 ROM people have been using or is this still "experimental" It's hard to work this out from the threads.
Thanks all.
Click to expand...
Click to collapse
1: during bootup, 2nd screen find
SPL
2.xx.0001 = g4
2.xx.0000 = g3
2: aku 2.3 seems very stable. Everything works as expected. i've only installed one version, after reading this thread: http://forum.xda-developers.com/sho...ht=16Mb_AKU2.3_GSM02.30.21_Extrom-4PDA.ru.exe
it's the 16Mb_AKU2.3_GSM02.30.21_Extrom-4PDA.ru.exe from this sites' ftp. It has been much more stable and responsive (due to the larger cache) then the preinstalled AKU2.0 on my qtek s200. Boot time is shortened by about 20s.
Before you install this you HAVE to unlock the CID:
http://wiki.xda-developers.com/index.php?pagename=Prophet_Upgrades
i didn't do this first time, and had to find a valid qtek rom that would install, since my device didn't bootup anymore..
Thanks for that. A question about unlocking the CID:
On the Prophet upgrade page you link to, it has the warning (3 times, in bold!): *WARNING!!!!! DO NOT PERFORM THIS IF YOUR PROPHET HAS THIS ROM "SPL 2.xx.0001" (New G4 Version)
Don't all G4's have that ROM? Mine does (2.13.0001). So where does that leave us for unlocking?
Thanks again.
Im also running a JAMin with the latest official rom and ive seen some good things about the 2.3 updates but im new to the whole cooked roms thing but ill figure it out.
What would I loose by upgrading from my JAMin rom and what would I gain?
Can I go back to my jamin rom if I dont like it?
I have installed the latest DOPOD ROM and I run it native without any soft installed and I reboot only about 1 a month!
To partially answer my own question: The CID unlock process looks like it IS for G3s only. To upgrade G4s you use pdocwrite.exe.
I've seen the details for using pdocwrite to install the pdamobiz ROM, but has anyone used it to install the 16Mb_AKU2.3_GSM02.30.21_Extrom-4PDA.ru.exe?
Cheers
dannyoneill said:
Im also running a JAMin with the latest official rom and ive seen some good things about the 2.3 updates but im new to the whole cooked roms thing but ill figure it out.
What would I loose by upgrading from my JAMin rom and what would I gain?
Can I go back to my jamin rom if I dont like it?
Click to expand...
Click to collapse
I'm guessing you'd loose some of the vendor customisations - which really are only some useless themes and the network provider settings - which for me just means setting up GPRS. Of course, you also risk loosing your JAMin entirely if you stuff it up
What you gain is a more up-to-date OS which is faster...
what about the extended rom? all the custom stuff is in there, i can access it no probs but would that remain with the rom mentioned above?
would I still be able to run them (if I back them up)
just been researching this rom, looks like it defaults overclocks your device and installs a ton and I mean a ton of apps that most people dont want.
Be warned, its heavily customized and may not be to everyones liking.
Anyone know if I do upgrade to this and unlock my CID if I can then re-apply the official JAMin rom?
dannyoneill said:
just been researching this rom, looks like it defaults overclocks your device and installs a ton and I mean a ton of apps that most people dont want.
Be warned, its heavily customized and may not be to everyones liking.
Anyone know if I do upgrade to this and unlock my CID if I can then re-apply the official JAMin rom?
Click to expand...
Click to collapse
To anyone reading this, here is my experience as of last night.
On my G4 I tried installing 16Mb_AKU2.3_GSM02.30.21_Extrom-4PDA.ru.exe after first hard-resetting my device. The installer went ahead fine, but it would not start-up: it would not get past the boot loader screen. So I reinstalled the latest i-mate ROM, booted up, then proceeded to try: ftp://xda:[email protected]/2006-10-05_Upgrade ROM_AKU2.3_lvsw.rar.
This uses the PDAmobiz method to upgrade a G4 which is essentially running a batch file while it unlocks and writes to the ExtRom and the ROM - then doing a hard reset, but it is not the PDAmobiz ROM.
This worked fine, and I now have AKU2.3. Even better, it is not customised, so there's no extra software installed, which I'm happy about. It's been running over night and seems very stable so far. I'm not sure what the paging size is on the ROM, maybe it's smaller = more stability.
So that's my experience!
My experience:
My JAMin running IPL/SPL 2.13.0001 using that rar file that worked for you...
hung on the copy of the OS to the device.
Trying now to recover it by downloading and trying to install latest JAMin update.
I cant get activesync / network connection using USB to phone... Don't know if that will be a problem trying to recover. Its sitting at the 3 colour screen atm.
Is there a way for me to update to IPL/SPL 2.15.0001 from 2.13.0001 before trying again? (assuming my phone is not already dead).
orian said:
My experience:
My JAMin running IPL/SPL 2.13.0001 using that rar file that worked for you...
hung on the copy of the OS to the device.
Trying now to recover it by downloading and trying to install latest JAMin update.
I cant get activesync / network connection using USB to phone... Don't know if that will be a problem trying to recover. Its sitting at the 3 colour screen atm.
Is there a way for me to update to IPL/SPL 2.15.0001 from 2.13.0001 before trying again? (assuming my phone is not already dead).
Click to expand...
Click to collapse
If your phone is G4, you should be able to install the vendor ROM no problem - which is magical really. You don't need ActiveSync running; well - it won't connect as the device is dead .
When you say it hung copying the file... it took a good 15-20 minutes to copy across for me, so I hope you weren't just being impatient.
yeah the JAMin rom worked so I'm back where I began.
I did wait 30 mins and it had crashed.... activesync wasnt doing anything, buttons / screen taps weren't working on pda.
Is it because I am running 2.13.0001 is my worry? The update specifies its for 2.15.0001. Is there any way I can update to 2.15.0001 from 2.13.0001 before trying again?
Cheers.
Tried the update again, and this time it worked.
Device is running AKU2.3 now, but still says 2.13.0001 for ipl and spl on boot.
Any ideas anyone on how I can update that to 2.15.0001? and what kind of change that makes anyway?
Thanks all.
dannyoneill said:
just been researching this rom, looks like it defaults overclocks your device and installs a ton and I mean a ton of apps that most people dont want.
Be warned, its heavily customized and may not be to everyones liking.
Anyone know if I do upgrade to this and unlock my CID if I can then re-apply the official JAMin rom?
Click to expand...
Click to collapse
you have been researching a different rom. this one does certainly NOT overclock the device by default. And it's a clean install, without any overhead, but WITH the stereo bluetooth headset support. perfect for my uses.
looks like i was looking at another rom, one loaded with junk.
I took the plunge and updated my jamin to the 16mb 4pda rom and im now back on the official jamin, it was way too unstable. Today I rebooted 5 times.
The volume is too low on headset and loud speaker
and some other annoyances.
I need stability
when i'm using AKU2.3,
in Settings / Regional Settings:
there is no "Turkey" option (also Russian).
how can i do that, is there a patch for apply these regions ?
thats why i'm using latest official jamin rom now (wwe) (from clubimate.com)
Ive found the source of instability with the 4PDA rom. Its the radio rom 02.30.21
I went back to my old ROM on my jamin and all was fine, a day without crash, Then loaded on radio rom 02.30.21, hardreset for good measure and setup again,. same as always.
Then, every hour or so im resetting.
Back to official jamin rom and all is fine again.
Radio ROM 02.30.21 is just totally unstable. Ideally I would like the AKU2.3 updated rom but without this awful radio rom they seem to be putting in them all.
hello, I installed "baterry status" on my HTC P3650 (WM6.1 pro). But programm windows of wifi connection has disappeared. I can not have page where I chose the wifi network. The logo "Wifi" in demarer / parameter / connections has disappeared. Either reinstalling programm windows or using a program like "Hitchhiker" (the latter is not compatible with WM6.1). I want a free software.
Thank you.
Sorry for my english, I'm french...
up ! please
up .
It kinda seems like some program got your WiFi settings screwed. Hard-reset should help.
Sorry. But I have already tried. This does not work! Have you any other ideas?
Thank you
If using any cooked ROM - revert back to the stock ROM (including the radio ROM) and try it again. If it doesn't work after hard reset on the stock ROM - use your warranty, you've got a faulty hardware.
it's ok. I flash my rom with udk R0 and my cruise is good.Thanks.
Hey Guys,
I set my Polaris back to Original ROM (WM6.0)[GERAMN] (http://forum.xda-developers.com/archive/index.php/t-379796.html) everything worked, but then I noticed that the polaris goes in "stand-by-mode" and the screen is black. Normally I push the on/off-button to turn on the display but this doesn't work any more. Also the buttons arn't working... Only a Soft-Reset helps...
Can anybody help me?
thx
I had it too. Do you have the latest radio rom installed?
1.59.42.15? My device does it with that radio.
NeoS2007 said:
I had it too. Do you have the latest radio rom installed?
1.59.42.15? My device does it with that radio.
Click to expand...
Click to collapse
My Radio-ROM is: 1.58.21.23
ROM-VERSION: 1.25.407.1 GER
Do you have a Step-by-Step instruction how to reflash everything back to the original GERMAN ROM (also SPL-SCREEN), because of the warrenty?!
SPL-SCREEN shows:
POLA100 MFG
SPL-2.20.OliNEx
CPLD-2
i have solved the probelm.
i installed a RADIO: 1.58.26.20
but the reception (GSM) is very bad...
any help?
I had this problem, sent phone back to O2, if you find out what radio gives a good signal I would be very interested, as you can read from my thread I have lost signal all together since receiving phone back
I have sort of the same problem, my polaris is in Spanish.
I figured out that the problem was in the usb connection.
Its very rare, but it works.
I have to use the phone with the checkbox of the "enable advanced network funcions" checked. That is in Settings, connections, usb to pc (or something like that, again, my phone is in spanish)...
If i uncheck that, when the phone enters in the sleep state, it hangs and never wakes up.
I hope this is usefull.
Chears.
Multiple Errors...
Hey Guys!
I use the XDA Orbit2 (polaris) with the 1.64.08.21 Radio and the latest german udK ROM.
The Screenerror disappears after flashing the udK ROM and the bad Radio with flashing the 1.64.08.21.
The screen thing is in my oppinion only an O2 error, and the radio thing is an HTC bug.
So try to flash and be happy!
But read the "HOWTO to HARDSPL" your device and "HOWTO FLASH"!!
Without you could brick your device!!
So far
Frank
e.g. everything you do with your device is on your on risk!!!
I've flashed several ROM's to my x7510, starting with Cmonex's 1st WWE ROM, followed by a few versions of Xacsx's ROM's, always going back to Cmonex's every so often.
After having installed one of Xacsx's ROM's, the keyboard layout changed from QWERTY to QWERTZ and I had to do a reg edit to correct it. I learnt from somebody here that QWERTZ is a german keyboard layout, which fits seeing Xacsx is german.
Now here's the strange thing - after having flashed a previous ROM with QWERTY layout, I still had the QWERTZ layout. The setting had somehow "survived" the flashing?
And it gets better. After having flashed Xstep's ROM, the phone on my device remained turned off and nothing I could do would turn it on. That is a MAJOR crisis for me! I flashed Cmonex's ROM again, to see if I could recover from that and hoping it was simply an error with the ROM.
Xstep's ROM has RealVGA built in and the default setting is 92 dpi.
After flashing Cmonex's ROM my device was running at 92 dpi, even though RealVGA is not installed! I had to install it just to change the settings back to 192 dpi.
And still the phone doesn't turn on!
Update:
The problems I experienced were down to two things:
1) I had flashed two ROMs that each contained their own extended ROM's in succession
2) Somehow I had messed up the radio on my x7510
THE SOLUTION:
1) Flash the extended ROM supplied by Cmonex, together with the matching ROM
1. customruu for x7510, grab it from attachment. use this to flash roms.
2. nbh building tool for x7510, in another attachment. just choose X7510 from device list to work with it.
3. some stock OS links (some taken from RUU some from dumped / reconstructed roms)
WWE (english) 19209: http://rapidshare.com/files/16043971...forATHE400.zip
WWE (english) 19217: http://rapidshare.com/files/16043113...forATHE400.zip
GER (german) 19217: http://www.filedropper.com/x7510gerruusignedforathe400
CHT (taiwan chinese) 19209: http://rapidshare.com/files/15981958...forATHE400.rar and a mirror http://www.megaupload.com/?d=30L24D8W
NEW: WWE (english) 3.29.707 rom: http://rapidshare.com/files/16967590...RUU_Signed.zip
+ extrom for 3.29.707: http://rapidshare.com/files/17304340...707_extrom.zip
make a mirror for others too please if you can =)
Click to expand...
Click to collapse
2) Flash the x7510 radio supplied by Xtep
I have repacked the radio for a x7510. You can download it from: http://rapidshare.com/files/191672003/x7510_Radio_1.58.rar
Click to expand...
Click to collapse
I have axcsx's WWE ROM loaded on my x7510 which I loaded after loading cmonex's 3.29 rom. To be honest I did not know that a QWERTZ keyboard existed, however, all of the keys on my keyboard keys appear to work exactly as one would expect - QWERTY fashion without any required registry fix.
I did download xtep's rom but I'm now not likely to load after your experience. I wish I had more technical knowledge to suggest a fix. cmonex posted after a long absence yesterday. Perhaps it worth a pm?
Still wonder why you had a keyboard issue and I don't?
I actually flashed ALL of Xacsx's ROM's at one stage or the other. I believe the problem started after I flashed version2 of his WWE ROM.
Time for an update:
The QWERTZ instead of QWERTY issue I believe was down to one of Xacsx's ROM's having over-written the extended ROM (he warned that it would).
I've downloaded Cmonex's HardSPL, WWE ROM and matching extended ROM, then flashed 1st the HardSPL, then the extended ROM and finally the WWE ROM.
As a result, I no longer get the 96 dpi upon startup, and the keyboard reverted back to QWERTY.
At least that's progress.
But, the phone still simply won't turn on and I get an error message about Device.exe
I'm hoping this isn't due to hardware failure and that there is a software fix for it, but time will tell.
NanoRuler said:
But, the phone still simply won't turn on and I get an error message about Device.exe
I'm hoping this isn't due to hardware failure and that there is a software fix for it, but time will tell.
Click to expand...
Click to collapse
It does not sound like a hardware problem. Have you tried searching at the Windows folder if you do have the Device.exe file? It might just be because of a missing file. I don't know the contents of the Ext ROM, but could this file be in there too. Maybe when you upgraded your Ext ROM, this file was not included. So everytime you perform a hard reset, since it is missing from the Ext ROM, it does not install to your device.
If the file is present in the Windows folder, maybe the registry is pointing to a wrong file.
Had a look and there is no DEVICE.EXE in Windows
your problems with the keyboard layout or 96DPI are dued to ExtROM. In the ExtROM of my ROMs I have added a configuration file to switch to 96 DPI, you have said before that Xacsx said something similar about QWERTZ layout.
The real problem is that Cmonex's ROM does not include ExtROM, so although you revert to his ROM, you still have the previous extROM (from Xacsx or mine). You also need to flash the official ExtROM released by Cmonex.
About the phone problem, I cannot help you. I haven't experimented that isue on my own x7510 (tested both WWE and ESN roms). Anyway, if is a ROM problem, it sould be solved by flahsing another ROM.
Device.exe is in XIP part of the ROM.
Yes, I've already re-flashed Cmonex's extended ROM, thanks Xtep.
To be honest I don't believe your ROM is to blame. I have reflashed Cmonex's extended ROM, then her matching WWE ROM, in that order and still I get the DEVICE.EXE error and still the phone won't switch on.
That pretty much tells me it isn't ROM related.
I've attached the log file (renamed to .TXT) to this post - any help is gratefully received!
It may be worth flashing the full HTC ROM, which incliudes ROM, ExtROM and Radio; once up and running again, you could then reflash your cooked ROM of choice.
Factory ROMsdo tend to fix some of these odd problems.
Hi Neil,
I was under the impression that's pretty much what Cmonex's plain vanilla WWE ROM + matching extended ROM was, which is why I flashed it.
Only thing I haven't done yet is reverting back to the stock SPL.
NanoRuler said:
Hi Neil,
I was under the impression that's pretty much what Cmonex's plain vanilla WWE ROM + matching extended ROM was, which is why I flashed it.
Only thing I haven't done yet is reverting back to the stock SPL.
Click to expand...
Click to collapse
I sugest you to flash a Radio again (I thin that version 1.58 in this thread is from x7510).
You problem is when you activate the phone and that is managed by radio.
Thanks Xtep - I think you're on the right track with your suggestion, but that radio won't flash to my x7510. It keeps failing with unsupported device error message.
Any ideas where I can get hold of a stock radio?
NanoRuler said:
Thanks Xtep - I think you're on the right track with your suggestion, but that radio won't flash to my x7510. It keeps failing with unsupported device error message.
Any ideas where I can get hold of a stock radio?
Click to expand...
Click to collapse
That is because this file is for Athena x7500.
I have repacked the radio for a x7510. You can download it from: http://rapidshare.com/files/191672003/x7510_Radio_1.58.rar
You are indeed a scholar and a true gentleman!
Xtep, I've got phone functionality back! Thanks a stack!!!
And right now I'm re-flashing your ROM!
Did that work NR?
If not, can you PM me- I may have a suggestion, but can't post in an open forum