hello, I installed "baterry status" on my HTC P3650 (WM6.1 pro). But programm windows of wifi connection has disappeared. I can not have page where I chose the wifi network. The logo "Wifi" in demarer / parameter / connections has disappeared. Either reinstalling programm windows or using a program like "Hitchhiker" (the latter is not compatible with WM6.1). I want a free software.
Thank you.
Sorry for my english, I'm french...
up ! please
up .
It kinda seems like some program got your WiFi settings screwed. Hard-reset should help.
Sorry. But I have already tried. This does not work! Have you any other ideas?
Thank you
If using any cooked ROM - revert back to the stock ROM (including the radio ROM) and try it again. If it doesn't work after hard reset on the stock ROM - use your warranty, you've got a faulty hardware.
it's ok. I flash my rom with udk R0 and my cruise is good.Thanks.
Related
As I am using XDAII for 2003se which is 2.0600WWE downloaded in this forum (http://forum.xda-developers.com/viewtopic.php?t=16880). The radio is 1.18 and the bootloader is 1.01. As I can upgrade my rom from 2003 to 2003se without any problem, I would like to upgrade it to WM5 in these few days.
However, I face some problems in my updating.
I have try XDA_WM2k5_2.01a64WWE, XDA_WM2k5_2.01a00WWE, however, I cannot search the phone network after upgrade rom. As I have read some posts before, I know that there may be my radio's problem, so I upgrade my radio also. I have try 1.17, 1.18, 1.08 with these rom. Unlucky, it also cannot search phone network.
So. for the only solution is get back 2003se with "Asia O2 Xda II WM 2003 SE Upgrade" in this forum. I can get my network back.
As the result, I would like to ask that what problem am I facing and what can I do? Is it the problem of bootloader ? or the problem of radio?
And also, there have "Asia upgrade" for WM5? It helps me a lot and I need not to afraid the networking problem.
Please help me. .
location?
you're lucky you can install that file to your XDA2. Mine can't I donno why. Activesync kept on disappearing. Although upgrading to 2003se is not a problem.
yetdy said:
you're lucky you can install that file to your XDA2. Mine can't I donno why. Activesync kept on disappearing. Although upgrading to 2003se is not a problem.
Click to expand...
Click to collapse
waht edition of active sync do you have? to get wm2005 to work it has to be active sync 4.0 or higher and for the newer roms you have to have AS 4.2 or equivalent beta versions
I come from Hong Kong
I am using 4.2 for sync
I'm currently using AS 4.2. The problem is that I couldn't install WM2005 2.01 64 to my himalaya. Once I double click on the installer, AS disappears and an error screen will come out after 10 mins. I also tried installing WM 3.0 but still the same result. I really wanted to try using WM2005 on my himalaya. could you guys help me?
yetdy said:
I'm currently using AS 4.2. The problem is that I couldn't install WM2005 2.01 64 to my himalaya. Once I double click on the installer, AS disappears and an error screen will come out after 10 mins. I also tried installing WM 3.0 but still the same result. I really wanted to try using WM2005 on my himalaya. could you guys help me?
Click to expand...
Click to collapse
hmmn...
you did not read thoroughly...
AS disappear normally...
are you using the hima no id dot exe?
visit the wiki :roll:
Jojo,
I tried installing the following files that I downloaded through this website:
HIM_3.00a.32_WM5_AKU_3_CLEAN
XDA_WM2k5_2.01a64WWE
WM2k5 3.00a64wwe
I understand that AS will disappear the same way as it does when I installed SE. However, what puzzles me is that all of these installers will inform me that there is an error and I could not proceed further with the installation. I even have to restart my laptop because AS couldn't communicate with my himalaya after my attempted installation.
Sorry I'm not well versed with computer language/jargons that's why I could not understand the readme file. I would really appreciate it if you could guide me. Thanks.
at last installed it! I have to re install though. I restored some of my data and it crashed on me.
guys,
I've installed Globe_all.cab to my Himalaya but I still couldn't email or send mms. could somebody help me out please?
CAn anyone tell me that , any version of WM5 is fit to Hong Kong User.
yetdy said:
guys,
I've installed Globe_all.cab to my Himalaya but I still couldn't email or send mms. could somebody help me out please?
Click to expand...
Click to collapse
high what network are you with and are you on contract or pay as you go?
cause i have the settings for o2 contract gprs and also havw the settings for e-mail etc
I'm now able to access my emails. however, MMS is still a problem. Still can't send or receive. I'm using a globe telecom postpaid line here in the philippines. I installed the attached file for the network configuration but still nothing.
Newbie here,
Flashed my Tmobile SDA (Tornado) to imate_sp5m_wwe_2.6.331.2. Everything looks good, Bluetooth does not work.
Accessing the BT via Comm Manager -> BT Setting, any changes I do for "Discoverable or ON" gives me a message "The settings could not be saved"
BT was working earlier with TMobile ROM. Any help is appreciated..
Thanks
P.S Any place from where I can download the Tmobile original ROM ?
Just wondering, why do you still flash WM5 when you have WM6?
Get WM6, read the tutorial on my signature
Installed WM6
Kar Hoe, Thanks,
I went ahead an completed the install. Looks good, How do I get Windows Live Messenger ??
BTW, BT is still not working, not sure why
I had similar behavior with my older Qtek 8010. One day I found out bluetooth doesn't work anymore. I tried to hard-reset, re-flash, nothing helped, still getting same messages as you. I thought it's broken so I bought Qtek 8310. After some time WM6 for Typhoon appeared so I flashed it to my no more used Qtek 8010 just for curiosity how it looks. I tried to switch bluetooth on and to my surprise it worked without any problem. But don't ask me why
i had this problem but it only stayed till i soft reseted the device.
sunjay said:
Kar Hoe, Thanks,
I went ahead an completed the install. Looks good, How do I get Windows Live Messenger ??
BTW, BT is still not working, not sure why
Click to expand...
Click to collapse
Get it from phil's extras folder
http://www.jm012a9749.pwp.blueyonder.co.uk/Extras.zip
karhoe said:
Get it from phil's extras folder
http://www.jm012a9749.pwp.blueyonder.co.uk/Extras.zip
Click to expand...
Click to collapse
Do the files work on Typhoon as well
They are normal WM6 apps, all should work
Err, hearing the word Typhoon in Tornado forum doesn't sound good, let me warn you. Tornado is not compatible with Typhoon. Don't flash Typhoon into Tornado and vice versa
karhoe said:
They are normal WM6 apps, all should work
Err, hearing the word Typhoon in Tornado forum doesn't sound good, let me warn you. Tornado is not compatible with Typhoon. Don't flash Typhoon into Tornado and vice versa
Click to expand...
Click to collapse
Sorry, I shall be careful next time
I didn't flash the roms interchangibly
Thanks for your help
neitin said:
Sorry, I shall be careful next time
I didn't flash the roms interchangibly
Thanks for your help
Click to expand...
Click to collapse
Lol, you wanted to flash Typhoon ROM into Tornado? Thank god you didn't, or we will have another 'white screen problem' thread
Live Messenger Installed. whats next recommendations
Kar hoe
Installed the live messenger, I see a lot of *cab files, most of the names are meaningful, but some are not,
whats the diff between t9 and xt9 ? I also plan to use VOIP, should i install some of the voip cabs ?
the other question is on reset to see if I overcome the BT problem, if I hard reset, will I loose the cab and the rom installed, I dont mind loosing my data as I have a backup and resync faster. Please advice
Thanks, appreciate all your help
they are different t9 softwares, simple as that, user preference, t9 is the normal one, where else xt9 is slight different
If you are using Andot's PEE, you just need to configure the xml files,
http://forum.xda-developers.com/showthread.php?t=324472
If you hard reset, you will lose your data only, you will still have the cabs and ROM, as long as the cabs are in your storage card
Hello,
Don't know if this was covered as when I had the problem I can't find any solution here or on the internet.
As I am considering sending my Qtek 9000 to get the memory upgraded, I wanted to test and trial out a few WM6 upgrades but I stumbled upon a network problem where the 3G will not connect.
I removed the contents on the Extended ROM and applied Lt.Cmdr.Ivan's ROM as it suited what I needed. Once done I was not able to access 3G but can make phone calls and SMS.
I then reflashed to nncuong's ROM as it had the min stuff and max amount of space for my customisation. Still the network failed..
Then I flashed to Beasty & Laurentius' ROM, and the same thing happened. I applied both the radio and also extROM flashes as well. The radio went smoothly, but the extROM got locked and I was not able to open it... Overwritting now does not work and it will try to install the stuff from the extROM everytime I try a hard reset or reflash of the OS...
Lastly, I finally got it to work when I located the original extROM for the Qtek 9000. Reflashed the extROM to the device and loaded Ivan's ROM and the network came back Some MMS setting problems that was fixed with a registry hack but everything was back to normal and the Universal is now WM6 without any problems.
The extROM now can't be used as a storage at all and it must be kept with the Qtek 9000 original files so this problem does not occur when reflashing or doing a hard reset. using other extROMs will only make this problem come back again.
If anyone needs the original Qtek 9000 extROM let me know and I will load it here.
If it has been posted before or there is already a solution, please ignore the thread.
Thanks
--- EDITED ---
Posted is the attachement for the version 1.3 of the Qtek 9000. Extracting it will provide an EXE file.
1) Connect your Qtek 9000 to the PC and activate bootloader. ( hold light and power while pressing the reset )
2) Once its connected via USB, start the file and it will flash your device to the new ExtROM.
Note it will also replace your custom boot screen.
I have the same problem...
Can you post here the information or data about the extRom?
Thanks you in advance
Posted the attachment and instruction.
If you get the sddaemon can't start, delete it from the startup will resolve the issue.
I would need some help to understand the following :
whatever ROM i try to install, after successfull flash and the following reboot when you get the "customization will start in 3 sec", it always hang on the "Installing WM6_PPC_HTC_Opera9_WWE.CAB" (last time i wait 5h to see if it move)
i tried RomeOS1.01 as well as 1.02 (just a few minutes ago), same also happen with DCS-TouchProv13 or even when i try to revert to RUU_raphaelWWE1.66...
i have a successfull HardSPL1.90.1.3 Olinex properly showing up on the 3 color screen.
Soft reset allow me to use the phone with a somehow successfull install ? (i get some of the appz but not sure it is 100% successfull / how can i check??)
Only concern is that the phone get warm around the camera/speaker after a few hours of usage and battery doesnt sound very powerfull (full load stay on about 5 to 6h with no bluetooth but wifi on)
original is an XDA diamond pro from o2 germany (model RAPH120)
as of right now i have
ROM: ROMeOSv1.02 WWE
Radio: 1.02.25.11
Protocol 52.33.25.17u
Any idea why the custom... always hang on the Opera install ? i dont care to not use opera or dl and install it myself afterward ??
thks
Stephane
(frenchy leaving in Germany and working for a US company.... cannot afford to use a DE phone only )
How about flash ur stock ROM back, then revert the stock SPL. There may be semething wrong with ur device
GERMAN ROM
http://forum.xda-developers.com/showthread.php?t=426400
German ROM work fine
Guess what .... after flashing back to a german ROM (thks for the link to an htc oiginal ) the "customization" with Opera9_DE went well and finish up normally.
i am going to work/play a bit with the German version to make sure it does not come from the device
any other idea in how/why my German o2 xda does not love all the great simple ROM cooked here ??
is any o2 Germany user here havig successfully flashed their xda with an English (or French ) ROM ??
Thanks guys for the great work you do here !
Steph.
I am seeing this exact same issue.
I have had no end of grief flashing my Raph, I maintain an XP VM (I am on OS X) entirely for flashing. I have flashed many different devices with dozens of ROMs and never had a problem until I got the Raphael. I have seen BSOD's and numerous connection issues while flashing using both Raphael_CustomRUU_v1.2 and RaphaelWrapper.
Also, every ROM I have flashed (on a XP SP3 box I put together from old pieces just to flash this bastard) has hung whilst installing opera.
I am using the o2 uk variant (as yet unreleased XDA Serra).
It is a RAPH120, is this unique to o2 devices?
Would appriciate any help getting this sorted, it could become a more widespread problem with the o2 uk variant is released, as there may be an influx people wondering why their device wont flash properly.
nb. I have an unreleased o2 built ROM (RUU_Raphael_O2_UK_1.60.206.1_radio_sign_52.29.25.12_1.01.25.16_Test.exe) that flashes and installs fine even from inside my VM.
Thanks in advance for any help anyone could provide!
[UPDATE] I tried installing Opera build 1957 from a cab and it worked fine.
maybe a dumb suggestion... but try to get your device unlocked and see what happen
I checked with Oli about whether unlocking would help:
Olipro said:
I see, then that's a weird issue, however, not related or fixable by the unlocker.
your best bet is to do a soft reset as soon as the customization dialog appears and see what happens.
I was initially suspecting it could be region protection, but in those cases, the ROM doesn't boot at all, so your case is a strange one.
Click to expand...
Click to collapse
So no leads there, as an interim solution I will repack ROMeOS² v1.03 without Opera and see how that works out.
i have the same device and the same problem. I will try to repack it with the german version of opera..
Oh dear, so it would appear that current roms do not work on O2 variant devices...
Has anyone successfully flashed an O2 device (with a cooked rom)?
I have hit some problems repacking ROMeOS² as hung has included measures to stop people making their own roms based on his. I pm'd him last night asking if he could help us out, but as of yet I have not recieved a reply.
I will probably start making my own rom from scratch tonight, but its a fair bit of work just to take opera out of the customization sequence. Hopefully its just some odd bug in the opera install, rather than something more serious. I guess worst case scenario is that after opera is removed it just crashes at another point during the costomization process.
[UPDATE]
hang.tuah said:
@dabs
I'll try to make it [ROMeOS² without Opera] for v1.04 mate, thanks for ur support..
Click to expand...
Click to collapse
Excellent, so at least we have a workaround in the pipeline. Still, it would be best to find the cause of the problem, as not all cooks have the time and dedication to make special versions of their roms for a small sub-set of users.
Actually Opera is included but with no device specific & v1.04 is done
smaier said:
I would need some help to understand the following :
whatever ROM i try to install, after successfull flash and the following reboot when you get the "customization will start in 3 sec", it always hang on the "Installing WM6_PPC_HTC_Opera9_WWE.CAB" (last time i wait 5h to see if it move)
i tried RomeOS1.01 as well as 1.02 (just a few minutes ago), same also happen with DCS-TouchProv13 or even when i try to revert to RUU_raphaelWWE1.66...
i have a successfull HardSPL1.90.1.3 Olinex properly showing up on the 3 color screen.
Soft reset allow me to use the phone with a somehow successfull install ? (i get some of the appz but not sure it is 100% successfull / how can i check??)
Only concern is that the phone get warm around the camera/speaker after a few hours of usage and battery doesnt sound very powerfull (full load stay on about 5 to 6h with no bluetooth but wifi on)
original is an XDA diamond pro from o2 germany (model RAPH120)
as of right now i have
ROM: ROMeOSv1.02 WWE
Radio: 1.02.25.11
Protocol 52.33.25.17u
Any idea why the custom... always hang on the Opera install ? i dont care to not use opera or dl and install it myself afterward ??
thks
Stephane
(frenchy leaving in Germany and working for a US company.... cannot afford to use a DE phone only )
Click to expand...
Click to collapse
Hi Stephane and others having similar trouble,
I had the same situation but my original ROM was Japanese, after trying a lot of possible official WWE versions for flashing and cooked ROMs, only one version worked.. Check the official WWE version Singtel.. it worked up to customization without problem.. the only difference the default internet page is Singtel but it is not a problem cause I can still go to the other sites..
Hey Guys,
I set my Polaris back to Original ROM (WM6.0)[GERAMN] (http://forum.xda-developers.com/archive/index.php/t-379796.html) everything worked, but then I noticed that the polaris goes in "stand-by-mode" and the screen is black. Normally I push the on/off-button to turn on the display but this doesn't work any more. Also the buttons arn't working... Only a Soft-Reset helps...
Can anybody help me?
thx
I had it too. Do you have the latest radio rom installed?
1.59.42.15? My device does it with that radio.
NeoS2007 said:
I had it too. Do you have the latest radio rom installed?
1.59.42.15? My device does it with that radio.
Click to expand...
Click to collapse
My Radio-ROM is: 1.58.21.23
ROM-VERSION: 1.25.407.1 GER
Do you have a Step-by-Step instruction how to reflash everything back to the original GERMAN ROM (also SPL-SCREEN), because of the warrenty?!
SPL-SCREEN shows:
POLA100 MFG
SPL-2.20.OliNEx
CPLD-2
i have solved the probelm.
i installed a RADIO: 1.58.26.20
but the reception (GSM) is very bad...
any help?
I had this problem, sent phone back to O2, if you find out what radio gives a good signal I would be very interested, as you can read from my thread I have lost signal all together since receiving phone back
I have sort of the same problem, my polaris is in Spanish.
I figured out that the problem was in the usb connection.
Its very rare, but it works.
I have to use the phone with the checkbox of the "enable advanced network funcions" checked. That is in Settings, connections, usb to pc (or something like that, again, my phone is in spanish)...
If i uncheck that, when the phone enters in the sleep state, it hangs and never wakes up.
I hope this is usefull.
Chears.
Multiple Errors...
Hey Guys!
I use the XDA Orbit2 (polaris) with the 1.64.08.21 Radio and the latest german udK ROM.
The Screenerror disappears after flashing the udK ROM and the bad Radio with flashing the 1.64.08.21.
The screen thing is in my oppinion only an O2 error, and the radio thing is an HTC bug.
So try to flash and be happy!
But read the "HOWTO to HARDSPL" your device and "HOWTO FLASH"!!
Without you could brick your device!!
So far
Frank
e.g. everything you do with your device is on your on risk!!!