Related
Hi;
I recently bought XDA mini S & today morning when i tried to upgrade to WM6 my XDA with following file i downloaded :
"HTC.Wizard.Faria.WWE.CE.v5.2.318.AKU4.0.0.01.WM6.Rom.Upgrade.USE_AT_YOUR_OWN_RISK.rar"
I ran "romupdateutility.exe" from the installer. It went fine till 99% but suddenly i got error "Error ocured during installation. Pls refer to readme file" but no readme file available
Now my problem is, i am stuck on RGB Screen
IPL 2.21.001
SPL 2.21.001
USB
and can't proceed further.
Can anybody help me out pls.
Thanks.
and it
htcwizard123 said:
Hi;
I recently bought XDA mini S & today morning when i tried to upgrade to WM6 my XDA with following file i downloaded :
"HTC.Wizard.Faria.WWE.CE.v5.2.318.AKU4.0.0.01.WM6.Rom.Upgrade.USE_AT_YOUR_OWN_RISK.rar"
I ran "romupdateutility.exe" from the installer. It went fine till 99% but suddenly i got error "Error ocured during installation. Pls refer to readme file" but no readme file available
Now my problem is, i am stuck on RGB Screen
IPL 2.21.001
SPL 2.21.001
USB
and can't proceed further.
Can anybody help me out pls.
Thanks.
and it
Click to expand...
Click to collapse
Search for Wizard Love ROM , download it and flash it. And hope ..
Read The Wiki
Sounds like you didn't unlock your phone before flashing, so. . .
READ THE WIKI!!!
THEN --
UNLOCK YOUR PHONE!!!
AND -- FOLLOW DIRECTIONS!!!
Of course THERE IS a Readme file
htcwizard123 said:
.............i got error "Error ocured during installation. Pls refer to readme file" but no readme file available .............
Click to expand...
Click to collapse
Right click the RUU that you run and extract the files in it, you´ll find a Word doc file that probably you should´ve read before....! Wizard Love or your original ROM will take you out of the tricolor screen, good luck!
I am on G4 PDA, can anybody post "Step by step" guide how to unlock my PDA & then upgrade to WM 6 . It will be very helpful.
Thanks in advance
There are already step by step guides - read them. If you can't find them, read them, and understand them, then don't flash your ROM. There's an entire board dedicated to the G4 version, but I guess you didn't see it.
http://forum.xda-developers.com/forumdisplay.php?f=343
Try this outline for SIM unlock
htcwizard123 said:
I am on G4 PDA, can anybody post "Step by step" guide how to unlock my PDA & then upgrade to WM 6 . It will be very helpful.
Thanks in advance
Click to expand...
Click to collapse
For SIM Unlock
http://forum.xda-developers.com/showthread.php?t=265928&page=47
For upgrading READ and UNDERSTAND the content of the first sticky of the G4 section. If you are going to save some money not paying to imeicheck you should consider spending enough time reading the diverse threads. Good luck!
DON'T CID UNLOCK YOUR PHONE USING LOKIWIZ . YOU WILL BRICK IT !!!
You have a G4 and it can be unlocked only by http://www.imei-check.co.uk/
You don't necessarily need to unlock it. It's easy. This are the stepps to follow :
1. Search for "Wizard Love ROM"
2. Download it and flash it using RUU.
3. Wait untill it's flashed and the customisation is finished !!!!
4. If you want to flash to a custom ROM, just download a rom of your choice
5. Extract the nk.nbf using WinRar or similar.
6. Download ShellTool
7. IMPORTANT !!! Read SHELL TOOL Readme and follow exactly to proper flash your phone
8. Enjoy !
But Guys my PDA is currently showing RGB screen & i am stuck on this
IPL 2.21.001
SPL 2.21.001
RUU
USB
How to proceed further.Pls instruct me step by step as i am newbie
htcwizard123 said:
But Guys my PDA is currently showing RGB screen & i am stuck on this
IPL 2.21.001
SPL 2.21.001
RUU
USB
How to proceed further.Pls instruct me step by step as i am newbie
Click to expand...
Click to collapse
i forgot lol
Just plug it in the USB and start flashing the Wizard Love ROM by RUU
htcwizard123 said:
But Guys my PDA is currently showing RGB screen & i am stuck on this
IPL 2.21.001
SPL 2.21.001
RUU
USB
How to proceed further.Pls instruct me step by step as i am newbie
Click to expand...
Click to collapse
We still need to know for sure whether you have a G3 or G4. You say you have a G4, but your IPL/SPL ends in 001, which is a G3. A G4 chip will have 3 zeroes -- not 2 zeroes.
So, which is it for sure?? You can't do anything until that gets cleared up.
newbie2 said:
We still need to know for sure whether you have a G3 or G4. You say you have a G4, but your IPL/SPL ends in 001, which is a G3. A G4 chip will have 3 zeroes -- not 2 zeroes.
So, which is it for sure?? You can't do anything until that gets cleared up.
Click to expand...
Click to collapse
That's a G4
G3 is like : 2.XX
G4 is like : 2.XX.XX1
Ok, i Flashed my device with "wizard_love rom" & now i can able to start my PDA but after configuring screen, my PDA stucks at Pop-up menus Window, i can still able to connect with Active Sync on my PC.
Pls help me to move forward.
Thanks in adv.
I guess the Wiki is wrong, then. . .
I've copied and pasted directly from the Wizard WiKi. If this information is wrong, someone needs to correct it.
A *G3* Wizard will have the following:
IPL: 1.xx *or* 2.xx *or* 2.xx.00x (Note that this version only has *TWO* 0's.). _SPL: 1.xx *or* 2.xx *or* 2.xx.00x (Note that this version only has *TWO* 0's.)_
A *G4* Wizard will have the following:_IPL: 2.xx.000x (Note that this version has *THREE* 0's.)_ _SPL: 2.xx.000x (Note that this version has *THREE* 0's.)_
That information was taken directly from this thread. It's the same thread I refer people to in order for them to find out if they have a G3 or G4. If it's wrong, I'm sitting here with egg on my face. . .
Great !!!!! U saved my PDA .....Thanks a lot for the help. I will never make this silly mistake again.
Thanks again.
htcwizard123 said:
Ok, i Flashed my device with "wizard_love rom" & now i can able to start my PDA but after configuring screen, my PDA stucks at Pop-up menus Window, i can still able to connect with Active Sync on my PC.
Pls help me to move forward.
Thanks in adv.
Click to expand...
Click to collapse
Do a hard reset. (hold the comm manager button and the voice speed dial and press the reset button. when asked, press send and it will format.)
Don't cancel the customisation.
@newbie2 now i am confused
@htcwizard123 What did you do ? Who was right ?
Is hard reset is required after flashing the PDA ? I was stuck on POP up menu screen but when i follow the instruction for Cut & Paste it booted normally
I have let completed all the setting to load & again the PAD restarted normally.
Pls let me know if i do the hard reset ?
Thanks again for ur help. I am doing flashing 1 st time that's why i said i am newbie
anichillus he has a G3 device... its obvious
htcwizard123 said:
Is hard reset is required after flashing the PDA ? I was stuck on POP up menu screen but when i follow the instruction for Cut & Paste it booted normally
I have let completed all the setting to load & again the PAD restarted normally.
Pls let me know if i do the hard reset ?
Thanks again for ur help. I am doing flashing 1 st time that's why i said i am newbie
Click to expand...
Click to collapse
No hard reset needed if it's all good. But troubles me ...how could you select the pop up menu before the cut/paste....tutorial appeared...??
Also...you must be lucky that you didn't brick your phone. So next time, think twice and flash only after you're sure that you know what you're doing.
Remember : Don't flash anything that contains IPL/SPL !!! (a G3 bootloader will brick your G4. And from now on flash using ShellTool or unlock your device via www.imei-check.co.uk - that will cost you some money)
DuKe_GR said:
anichillus he has a G3 device... its obvious
Click to expand...
Click to collapse
Why you say that ? I still think that 2.xx.xx1 is a G4
Also i don't think that you can flash a G3 with Wizard Love
Thanks again for all ur help.
But i am sure i have G4 device, i think it is not CID unlocked that's why i came across this issue. Do u think i have G3 device ?
Now i want to Flash it Windows Mobile 6, shall i follow instructions which is given in "G4 step by step install wm6.zip". Will it work fine ?
Pls help
Can anyone give me a spanish rom for flash kaiser?
thank's Andrea
ciassi83 said:
Can anyone give me a spanish rom for flash kaiser?
thank's Andrea
Click to expand...
Click to collapse
I have dumped it from the device, and have Part0-3.raw files, but don't know if it's possible to reconstruct and flash without the original OS.NB file.
Any help? Can i reconstruct using Spanish dumped ROM using WWE nb-imgfs files?
Thanks in advance.
Regards.
I don't understand is my first attempt to use this phone..
please help me.. please i don't want loose it!!
ciassi83 said:
I don't understand is my first attempt to use this phone..
please help me.. please i don't want loose it!!
Click to expand...
Click to collapse
Well, if you don't want to loose your TyTN II, you only need to power on, and start to using. Sure works for the most of you use it.
This forum is only to learn and have fun with the kaiser. So if your Kaiser works, don't touch...only read the user guide and that's all.
Read a lot is the only way to learn how to keep your device working
Regards.
please you are from spain and have the same kaiser..please help me to do a ruu for flash my device and turn it on..please..
ciassi83 said:
please you are from spain and have the same kaiser..please help me to do a ruu for flash my device and turn it on..please..
Click to expand...
Click to collapse
If you want to get some help, you need to give more details about your problem (if exsit...).
What have you done before the error happen? What is the error? What happen when you power on the device? What ROM version? What is the start secuence?
Without this info anyone can help you, believe me, peopple here are not magicians
-I launched kaiser ssplv1 on my kaiser
-then i executed RUU.Kaiser.HTC.WWE.1.56.405.5.radio.sign.22.45.88.07.1.27.12.11.Ship
-At 16% of flashing, processes stop and i follow RUU.Kaiser.HTC.WWE.1.56.405.5.radio.sign.22.45.88.07.1.27.12.11.Ship instruction for continue the processes, but now at 1% process stop cause invalid vendor id.
-Now when I started I see the 3 color band (red,green,blue) and these words:
kais130
spl-1.56.0000
cpld-8
--in top right there is written RUUNBH
This is all..do you need anymore information?
please don't hurry with me..i'm afraid for this situation..
ciassi83 said:
-I launched kaiser ssplv1 on my kaiser
-then i executed RUU.Kaiser.HTC.WWE.1.56.405.5.radio.sign.22.45.88.07.1.27.12.11.Ship
-At 16% of flashing, processes stop and i follow RUU.Kaiser.HTC.WWE.1.56.405.5.radio.sign.22.45.88.07.1.27.12.11.Ship instruction for continue the processes, but now at 1% process stop cause invalid vendor id.
-Now when I started I see the 3 color band (red,green,blue) and these words:
kais130
spl-1.56.0000
cpld-8
--in top right there is written RUUNBH
This is all..do you need anymore information?
please don't hurry with me..i'm afraid for this situation..
Click to expand...
Click to collapse
Seems you have a briked kaiser... take a look at http://forum.xda-developers.com/showthread.php?t=334693 to see if helps you getting info about your kaiser CID version...
I suppose you have an Spanish Kaiser, right?
So seems the only way to recover is flashing spanish Kaiser ROM (that we haven't).
The other way is sending to repair...
Other info:
HTC TyTN II Kaiser (Kais130)
Rom: 1.56.412.4
Date Rom: 08/28/07
Radio: 1.27.12.11
Protocol: 22.45.88.07W
so I say you canhelp me..you have my same rom..
ciassi83 said:
Other info:
HTC TyTN II Kaiser (Kais130)
Rom: 1.56.412.4
Date Rom: 08/28/07
Radio: 1.27.12.11
Protocol: 22.45.88.07W
so I say you canhelp me..you have my same rom..
Click to expand...
Click to collapse
Yes, i have the same ROM, but the ROM is on my device, i have't the RRU file to upgrade your device...
I extracted the ROM, but for now don't know how to reconstruct it.
So you must wait or send to repair...
problem solved
I resolve it!!
Share this solution please it can help someone!!!
I was blocked to boot menu (no system bootstrap..)..so i launch mtty program and digit:
boot nbh ... et voilà my kaiser restart!!!!!!!!
After I reflashed rom with hardspl in correct way...
Thank's for all!!!!
ciassi83 said:
I resolve it!!
Share this solution please it can help someone!!!
I was blocked to boot menu (no system bootstrap..)..so i launch mtty program and digit:
boot nbh ... et voilà my kaiser restart!!!!!!!!
After I reflashed rom with hardspl in correct way...
Thank's for all!!!!
Click to expand...
Click to collapse
Good news, mate.... congratulations....
I am trying to upgrade my Wizard to WM6...
I have followed the instructions on this page... When I flash a full-feature WM6 ROM (tried BlackDiamond 3.1, TNT.19199 and XDA Mobile 6 RC5) it reaches to 99% and then hangs for a while then I get the error recovery dialog.
I have also tried the slim versions (WM6.1 slim edition, and XDA Mobile 6 lite), when I flash those, everything goes well and flashing completes, however when the installation finishes I get the same WM5 interface, I check the about dialog in the Wizard settings and pingo it says "Windows Mobile 5"...
What could be the problem???
My current IPL/SPL is 2.16
Bad cid unlock!!!
Unlock
Unlock your fone right from the start read the guide depends if u have g3 or g4 device you may need to down grade radio rom. the unlock guide and faria guide gives you all the detail.
Quiyaro said:
Bad cid unlock!!!
Click to expand...
Click to collapse
Yep... that was the problem...
I unlocked it again... flased the ROMs and it worked...
Thanks alot...
I tried to update HardSPL 3.29 on my friend's Kaiser from AT&T. But it still stucked.
I run SDA-Unlocker .It shows ok.
After serveral tries the phone stucked So i use Kaiser SuperCID and Security Unlocker v0.1 by ockyw2001SPL and do step 1. I don't know what i have exactly done.
During copy it stays at 95 % !
Now every time i boot the device it shows only the bootloader
KAIS1*0
SPL-3.56.0000
CPLD-8
Seial
I can't upgrade other ROM any more.
I think i should take HardSPL 3.56force USB ? because ATT already has SPL 3.56 and WM I 6.1
What have i to do now ? I'm a little confuse because the phone of my friends. That is the gift from his brother. :-(
read this then go to the sticky at the top of this forum and follow the links to the right thread for you to ask this in, good luck.
Ok ! I folow http://forum.xda-developers.com/showthread.php?t=420683
and tried to flash SPL 3.29 again. But it still stucked at 0%.
I will try the SD version.
Other question: should the battery loading at in bootloader ?
Hi,
Try re-flashing the stock ROM for the phone. You'll either find it on the wiki or on your carriers website.
Any more problems, please post in this thread : http://forum.xda-developers.com/showthread.php?t=423486 (after reading the 1st post o/c)
Dave
i bought an used wizard and now i have the question, it has an custom ROM, but i don't like it
now, how do i know if it has hardSpl
when it boots up it shows
IPL 2.26
SPL 2.26
i can't find nothing in the wiki, so please if someone could answer me i'd be very thankful
damir-bosna said:
i bought an used wizard and now i have the question, it has an custom ROM, but i don't like it
now, how do i know if it has hardSpl
when it boots up it shows
IPL 2.26
SPL 2.26
i can't find nothing in the wiki, so please if someone could answer me i'd be very thankful
Click to expand...
Click to collapse
You will need to know if your wizard is G3 or G4...according to your ipl/spl you have a g3...i could be wrong. there is a tool you can download to your desktop to check this
thread for the wizard service tool Check this out. install it and then click on "enable rapi + unsigned apps"...then click on device info. it should tell you if you are unlocked or not. after you do that...Go Here!!!