How to revert back to WM5? - 8125, K-JAM, P4300, MDA Vario ROM Development

Well, I followed the instructions and successfully used Faria's WM6 Kitchen ROM, but it's really slow and I don't like it... I'd like to just go back to WM6. How do I do that?

http://wiki.xda-developers.com/index.php?pagename=Wizard_Upgrades
you need to flash it with wm5

So even when I'm still at the Faria's WM6 ROM, I can just use the program and then flash it?

just flash a official rom because all official roms for the wizard where wm5 or flash an old cooked wm5 rom

Yeah, I'm just asking if I can just use the program while I have the Faria WM6 ROM installed on my phone.

When you download a rom it usually comes with it's own flash program.
For speed though try out Octavio's 6.0 before you decide WM6 is slow.

Can you guys please just say yes or no :3

steamwhipper said:
Can you guys please just say yes or no :3
Click to expand...
Click to collapse
What we are saying is that if you download a wm5 rom to go back, it will have the flash utility with it. I don't know for sure if there are any differences. I just use the one included with the rom.
If you download the Att or tmobile rom for your wizard it will have one with.

Related

can back to wm5 from wm6?

I am use WM6 on usa MDA but i dont like it much. is possible back to wm5? if so, how?
THanks
just flash a WM5 rom. Pretty simple... Just remember you can't move your contacts and stuff directly over with a backup, so use PIM Backup to save off your SMS, MMS, Call logs, etc if you want. Then install it on the WM5 rom and you can restore that stuff.
mfrazzz said:
just flash a WM5 rom. Pretty simple... Just remember you can't move your contacts and stuff directly over with a backup, so use PIM Backup to save off your SMS, MMS, Call logs, etc if you want. Then install it on the WM5 rom and you can restore that stuff.
Click to expand...
Click to collapse
Dont flash the radio rom if you are using a G4 device or you will end with a brick !!!
G4's can flash radios. Its the IPL/SPL that will brick them. If you use the official rom that is for your phone, then you can even flash that.
If you use MDA Vario,just flash this ROM from here:
http://www.tm-phonedownloads.com/download_manager_mda_vario.html
Run exe file to flash.After that,you can flash any another WM5 ROM with shelltool!
phantranphuc said:
If you use MDA Vario,just flash this ROM from here:
http://www.tm-phonedownloads.com/download_manager_mda_vario.html
Run exe file to flash.After that,you can flash any another WM5 ROM with shelltool!
Click to expand...
Click to collapse
umm... is MDA vario same as usa MDA? will my usa MDA accept wm5 UK version?
No problem!You can flash T-Mobile 2.21 for every vario.It's supprise why you have WM6 in your phone?If you can flash WM6,you never ask like it! Sorry if it's rude.Just fun!
I think you should flash T-Mobile 2.21.Then,use shelltool flash T-Mobile USA 2.26 and radio 2.25.And read in this forum.

Upgrading Radio on G4 locked device?

How does one go ahead and flash to an updated Radio Rom on a G4 Cingular locked Wizzard? I am currently running NBD 8.0 using 2.25 radio and would like to try out faria's 2.69 radio...and have the nk.nbf file for the radio. Do I just flash it using ShellTool as I have done with all the other full operating systems? Is this even possible to flash the radio on a G4 locked device?
http://forum.xda-developers.com/showthread.php?t=319751&page=18
im not sure if you read the nbd 8.0 thread lately but you asked this similar question and it was answered for ya if you still dont understand just mail me
mdajunkie said:
http://forum.xda-developers.com/showthread.php?t=319751&page=18
im not sure if you read the nbd 8.0 thread lately but you asked this similar question and it was answered for ya if you still dont understand just mail me
Click to expand...
Click to collapse
oh, sorry man totally missed your response
my only last question is, do I still copy over and run the cert and enablerapi cab's on the phone before I use shelltool, or just flash the rom without it?
fliplyricist1 said:
oh, sorry man totally missed your response
my only last question is, do I still copy over and run the cert and enablerapi cab's on the phone before I use shelltool, or just flash the rom without it?
Click to expand...
Click to collapse
no you dont need to run those cabs again. all you have to do is just replace the nk.nbf file and run shell tool and thats it less than five minutes and your working with a new radio. Now if 2.69 dont satisfy you look in the cingular and t-mobile radio threads i have posted a zip file with a variety of radios collected from all over the wizard forums so you can test and try them all if you like. enjoy
edit: the file should be in the first or second page of each thread
i don't believe that you have to use the shelltool method in order to flash a radio rom. on my first rom flash, i followed the "Faria G4 Step by step installer with instructions" and did use shelltool for the OS part, but i used the regular RUU and flashed the 2.19.11 radio with no problems, without installed the enable rapi and cert cab.
thanks a bunch guys...im going to flash it now
are you going to go through the shelltool process? or install it simply with the RUU? i know it's a lot to ask you to put your device at risk but i'd just like to know if G4 Radio ROMs can be upgraded with RUU. i'm using 2.19.11 right now (with the radiofix) but i've heard 2.69 can give me better results. just would like to see if i can go the easier, RUU route.
Azimuth21 said:
are you going to go through the shelltool process? or install it simply with the RUU? i know it's a lot to ask you to put your device at risk but i'd just like to know if G4 Radio ROMs can be upgraded with RUU. i'm using 2.19.11 right now (with the radiofix) but i've heard 2.69 can give me better results. just would like to see if i can go the easier, RUU route.
Click to expand...
Click to collapse
just a headsup...but a shelltool 2.69 flash messed up my nbd installation (would freeze at the nbd splash screen)
had to flash back to original factory cingular rom, and then reflashed the radio using ruu tools....and it worked perfectly.
now im just trying to reinstall nbd succesfully (always have a hard time with 8.0 for some reason)

Flashing question

So I used hardspl v1 and then flashed dutty's wm6.1 hybrid v2 rom to my tytn. Everything went well and it is working fine but I wanted to try out some other roms. Do I need to do anything in particular before trying other roms. I've been doing research and can't find any information on what to do now. Do I need to hardspl again before I flash another rom? Thanks for the help, I realize that its a noob question.
SharpieMarker said:
So I used hardspl v1 and then flashed dutty's wm6.1 hybrid v2 rom to my tytn. Everything went well and it is working fine but I wanted to try out some other roms. Do I need to do anything in particular before trying other roms. I've been doing research and can't find any information on what to do now. Do I need to hardspl again before I flash another rom? Thanks for the help, I realize that its a noob question.
Click to expand...
Click to collapse
No. You do not need any additional process before you flashing to another ROM.
Hard-SPL is just a safety procedure that ensure your Tytn II not to be a brick when you flashing ROMs. Since you've got a Hard-SPL, there's no need to flash another one unless the old Hard-SPL has some bugs.
ss1271 said:
No. You do not need any additional process before you flashing to another ROM.
Hard-SPL is just a safety procedure that ensure your Tytn II not to be a brick when you flashing ROMs. Since you've got a Hard-SPL, there's no need to flash another one unless the old Hard-SPL has some bugs.
Click to expand...
Click to collapse
Awesome. One more noob question. If I want to flash a rom that has a radio included that is a lower version than the one I have currently what do I need to do? Remove the radio from the rom or will it flash without issue?
If the ROM includes a radio, it will overwrite whatever you currently have. So no need to do anything else.
SharpieMarker said:
Awesome. One more noob question. If I want to flash a rom that has a radio included that is a lower version than the one I have currently what do I need to do? Remove the radio from the rom or will it flash without issue?
Click to expand...
Click to collapse
you just flash the new rom with the radio... if u dont like the radio you can always flash the radio you want later on.

How to Unistal 2.03 ROM

i have installed 2.03 Rom on my Jam it works nicely but i want to try wm6 Black when i try to install it dont work Jam dont go to installeing mode and pc dont recognize the device help?
Please post a URL to this ROM you are talking about, because there isn't such a thing as WM5/6 for the Magician.
wwe 2.03 Htc fo rmagician
i installed this ROM from the same forum but now no ROm works on my jam the installers says failked to recognize the device jam restars and dont go to bootloader mode itself when i try to do it manually it dont work
i installed this rom from here
http://forum.xda-developers.com/showthread.php?t=322110
Your case, will need a bit more thought, on my part.
I hate 2.03wwe, I can't change rom long looooooong ago.
It is still the best attempt so far for cooking a ROM to look like WM5/6
but some things are kinda annoying about it...
like TotalCommander, and that Russian cab tools thing...

NEED HELP - An Herald & the noobest noob...

Well what can I say?
I tried everything for finding a ROM that allows my Herald using wm6 istead wm5 but i did not find anything including htc eclub, various forums (where i simply got lost )
is there anyone who can show me where i can find this ROM and tell me how install it on my Herald?
tnx
DEADTEO said:
Well what can I say?
I tried everything for finding a ROM that allows my Herald using wm6 istead wm5 but i did not find anything including htc eclub, various forums (where i simply got lost )
is there anyone who can show me where i can find this ROM and tell me how install it on my Herald?
tnx
Click to expand...
Click to collapse
1. This forum is for MAKING ROMs not finding ROMs.
2. You want 6.0, not 6.1 or 6.5?
3. You want something official?
4. Third part ROMs are better. There are a BUNCH on this forum. Search for them.
5. If you really just want a stock one, why didn't you just search "Herald stock 6.0 rom"
6. Since you have wm5.0, it must mean that you have an IPL/SPL lower than 4.0. Do NOT HardSPL or use USPL. READ READ READ. If you can't flash the STOCK 6.0 (which upgrades your IPL/SPL) then create goldcard to let you flash it. Flash that FIRST to get your IPL and SPL upgraded. Search on how to do that. It's all in the forum.

Categories

Resources