Hi friends,
I got HTC S620 Smartphone from my brother US. It was working well for the past 6 months and i updated to WM6 also now suddenly it got corrupted and shows the following error. It takes 30 min to boot and hangs with this following error. i Unable to do anything. I tried to update WM6 again but same still same error. I gave it to HTC service center in chennai and he unable to resolve this problem. And I Unable to open folder with usb cable. Any one please help me.
t-zones
While retriving the URL :
http://wap.t.zones.com
the following error occured:
Network error 19:
The Attempt to connect to the server failed
More Information Try Again
Alert
Cannot Start 'winwapexe'. A critical component
is either missing or failed due to low memory.
Try to hard reset your phone.
Related
I was doing an Update to my i-mate Jam using ma_cdlsku2_arb_10300_141_10100_ship.exe but something in the middle of the upgrade went wrong, the computer rebooted.
When the computer booted up I tried to update again I turned the i-mate (Qtek S100) up it wont boot completly. I get the blue Imate screen and at the bottom right corner I see in red
NO GSM
D 1.03.00 WWE
and it stops there, I tried to run the MaUpgradeUt.exe and I got Error 120 Country ID ERROR, then I tried QtekS100_FRA_DT_10302_157_10100_For_MDA_T_Mobile.exe but nothing I get the same error.
I hard reset it and I get the USB written on the screen. I tried to run an upgrade but ma_cdlsku2_arb_10300_141_10100_ship.exe gives me error 101 connection problem and I tried QtekS100_FRA_DT_10302_157_10100_For_MDA_T_Mobile.exe and get the Error 120 Country ID error.
Please help what to do ?
Please help.
by the way, I baught this in Dubai, so I am no able to take it back to dealer to fix it. please help :?:
Ok I am at the end of my wits here.
I tried to do an Upgrade of my Imate Jam to the latest Rom on the Clubimate site
But it got stuck on the checking site. So after a bit of research I found that if I unplugged and reset it, it should take the upgrade and it looked like it would Except
On the CE update it gets Stuck at 7% and gives me an ERROR 112 CE Update Failed.
I have tried many times to get it too work rebooting each time.
I have tried on 3 different Machines in case it was the USB Hub Problem.
I even tried the S100 rom with the Country code hack and it even got stuck on 7% same error.
Please Help
SciberWolf
sciberwolf said:
Ok I am at the end of my wits here.
I tried to do an Upgrade of my Imate Jam to the latest Rom on the Clubimate site
But it got stuck on the checking site. So after a bit of research I found that if I unplugged and reset it, it should take the upgrade and it looked like it would Except
On the CE update it gets Stuck at 7% and gives me an ERROR 112 CE Update Failed.
I have tried many times to get it too work rebooting each time.
I have tried on 3 different Machines in case it was the USB Hub Problem.
I even tried the S100 rom with the Country code hack and it even got stuck on 7% same error.
Please Help
SciberWolf
Click to expand...
Click to collapse
Could be the rom you downloaded not complete or there is file error. Try download the file again and extract to a new folder.
Check on this page. Use the no ID file to start the flash.
http://forum.xda-developers.com/viewtopic.php?t=18550&start=25
Goodluck.
Thanks for the reply OCMAX but no go
Tried downloading the File again From Clubimate and XDA-Devs FTP no go
Tried with the No ID updater as well but it is still getting stuck at 7%.
The weird thing is it always gets stuck at 7% even if it is another Rom Image.
The only thing I have not tried is the Original Rom image that came with the
Imate Jam because I can’t find it. Anybody have it?
Any other subjections. Im now at 27hours without my PDA not that I’m
Counting
SciberWolf
sciberwolf said:
Thanks for the reply OCMAX but no go
Tried downloading the File again From Clubimate and XDA-Devs FTP no go
Tried with the No ID updater as well but it is still getting stuck at 7%.
The weird thing is it always gets stuck at 7% even if it is another Rom Image.
The only thing I have not tried is the Original Rom image that came with the
Imate Jam because I can’t find it. Anybody have it?
Any other subjections. Im now at 27hours without my PDA not that I’m
Counting
SciberWolf
Click to expand...
Click to collapse
Did you do hard reset the first time you face the 7% error and you are now in the USB v1.0 bootloader mode now?
I had the same problem with a friend's QTEK S100 it was stoping with an upgrade error at the very beggining of the extended ROM flashing no matter which ROM you were flashing to it! At the end they exchanged it for a new one, probably the ROM chip was faulty!
MDA Compact does not open HELP!!
Hello everyone,
I'm new to this board and I read nearly all threads about MDA. I bought my T Mobile MDA Compact 2 weeks ago from Germany. Yesterday while I was trying to change its language to English its locked. I installed Windows 2003 SE then device restarted but not open anymore. Now I can not open it. When I try to open it on the top of the screen it writes "Seial" and at tthe bottom it writes "1.00 Version". What should I do? I need immediate assistant; can anybody help me to make my MDA Compact working again?
Thanks
AE
For those who stuck at the warning screen of: 150 connection error.....
Try to do a bootloader update (can be found on xda-ftp), wich most of the times work, and when the update is done, don't reset your device as asked, but immediately update your device with your desired rom.
This has worked for me, after days of no succes and having constantly the 150 connection error message.
If this thread or solution has already been created, then i apologize...
Great succes..
Well I've tried everything possible, updated device manager fro vista. MDA Vario 3, connects for active sync but after running KaiserCustomRUU.exe. where it update the crrunt ROM version... it changes the screen into 3 color screen , after few minutes in the same condition............ 0% process........ and then........... shows me an error message as under:
ERROR [262]: UPTAE ERROR
The ROM update utility has encountered communication errors during the update process. The program will guide you step-by-
step to recover from the errors so you can continue the update.
and i need to restart MDA. although on recovery process it directly come to normal screen instead of 3 color screen, which means (i guess) it never started changing ROM current picture.
Any help about it plz.
Regards
Iaan
iskhan said:
Well I've tried everything possible, updated device manager fro vista. MDA Vario 3, connects for active sync but after running KaiserCustomRUU.exe. where it update the crrunt ROM version... it changes the screen into 3 color screen , after few minutes in the same condition............ 0% process........ and then........... shows me an error message as under:
ERROR [262]: UPTAE ERROR
The ROM update utility has encountered communication errors during the update process. The program will guide you step-by-
step to recover from the errors so you can continue the update.
and i need to restart MDA. although on recovery process it directly come to normal screen instead of 3 color screen, which means (i guess) it never started changing ROM current picture.
Any help about it plz.
Regards
Iaan
Click to expand...
Click to collapse
First did you do everything in this post?
iskhan said:
Well I've tried everything possible, updated device manager fro vista. MDA Vario 3, connects for active sync but after running KaiserCustomRUU.exe. where it update the crrunt ROM version... it changes the screen into 3 color screen , after few minutes in the same condition............ 0% process........ and then........... shows me an error message as under:
ERROR [262]: UPTAE ERROR
The ROM update utility has encountered communication errors during the update process. The program will guide you step-by-
step to recover from the errors so you can continue the update.
and i need to restart MDA. although on recovery process it directly come to normal screen instead of 3 color screen, which means (i guess) it never started changing ROM current picture.
Any help about it plz.
Regards
Iaan
Click to expand...
Click to collapse
you have vista then your prob better off flashing via sd, also you shouldn't have started a new thread to ask this question, this forum isn't intended for every time someone has a problem and searches and can't find the answer to start a new thread. PM someone you see posting that seems knowledgeable and ask that person if you can't find what you are looking for.
Flashing through SD is always the best. And its a lot safer than USB way.
Thanks for the help guys... closing thread as this issue can be fixed by reading the sticky and also the wiki..
Peace,
Josh
Hi all,
I'm desperatly trying to update the ROM of my HTC Touch Pro with:
V14_21884_Final_RC
Timolol_5100603TH
TAELROM_v4.23569_STANDARD_21MAY10
but every time it stucks at 0% for a few seconds, then the error message
ERROR [262] : UPDATE ERROR appears:
The ROM Update Utility has encountered communication errors during the update process....
Connection is via USB to a Windows 7 Laptop.
Can anybody help plse?
Cheers Peter
did you apply hardspl on your phone? did you follow the steps from http://forum.xda-developers.com/showthread.php?t=448008 ? are you sure your phone is correctly connected to your pc?