Hi all.
If I have the FM Transmitter connected to the headphone jack on the phone and try to use a Bluetooth headset to make/recieve calls while driving, will this work?
I am concerned that the phone will try to output the sound to the car stereo and that the voice will be picked up by the phones built-in speaker.
Thanks for any help in advance.
If it's a standard headphone adapter, it should be fine, I was able to use my BT headset with a Himalaya connected to desktop speakers, but it might vary with devices.
Best bet is try if you already have a BT headset to connect a normal pair of headphones to it and see what happens, it certainly won't hurt it, and the fact it's speakers, headphones, or FM transmitter is irrelevant as it's just a jackplug audio output as far as the device is concerned.
I don't have the BT headset yet - Going to buy the two said items together, but hopefully it works on the XDA/K-Jam or whatever too.
Thanks for the help
Hi all -
I have an older Audi a4 with the factory Concert/Bose radio. I replaced the CD changer input with one of these:
http://www.crutchfield.com/App/Product/Item/Main.aspx?g=50900&i=581DFVW&tp=1672
This allows me to input audio to my car radio using RCA-type connectors. I then got one of these:
http://www.cablestogo.com/product.asp?cat_id=2009&sku=03178
that lets me plug into a 1/8 jack and send the audio to the RCA jacks. I then got:
http://www.ppc4you.com/pages/13635.html
which allows me to pluf the 1/8" plug into my Trinity. I didn't use this exact one, but mine is similar to this one. Don't use the 1/8" converter that is in the form of a single solid piece, only use the ones that have a short length of wire between the two ends. The solid ones do not stay in properly. Also, by using the Y connector, I can both plug my Trinity into my stereo as well as plug in a regular 12v lighter power converter and power it. I then finished it off with the ProClip/Brodit cradle:
http://www.proclipusa.com/home/home.aspx?afid=42&admkt=670ca577
Everything works great! Once I have it all hooked in,
1.) I can play MP3's through my car stereo (useful)
2.) TomTom directions also go through my car stereo, and the music is slightly muted making directions easier to follow (very useful)
3.) Best of all, I tried calling my girlfriend (while the Trinity was in the cradle, playing MP3's through my stereo), and a.) her side of the conversation came through my car speakers, with the music muted, and b.) she said she could hear me just fine (but a little loud), which tells me the Trinity continued to use the internal microphone and amplified my voice the same way it would when set on speakerphone!
So, I now have the equivalent of in-dash navigation, integrated cellphone, and MP3 player. And I can take it with me when I leave the car! This is exactly why I bought this phone in the first place. What surprises me is that it actually worked!!! <grin>
Mike
Thanks for sharing your setup!
Good on ya!!
I share a similar story.
I drive a Mazda 3.
I installed a chip at the back of the stereo so that it allows an audio auxiliary input into my car stereo.
I then bought a 3-in-1 adaptor, car charger and mic adaptor from ebay.
This is so that I can place my craddle and phone further away, while having the mic externalised and stuck near my dashboard.
So in effect, same deal! GPS navigation + mp3 player while charging, calls get accepted no problem, and make calls via voice speed dial. Absolutely loving it.
Hey guys,
You should check out my set up, I have my Trinity on a GPS holder (suction cup), my trinity is then connected to a device like this:
http://www.oo.com.au/MP3_Player_Car_Modulator_FM_T_P5477C75.cfm
It accepts USB drives to play MP3's through the FM Transmitter, however I used the USB port to power my device, and the 3.5mm port (this allows you to plug in other devices and play through the device via FM) goes to my Bluetooth handsfree (i-Tech Radio Clip).
From here I have an ultimate wireless solution apart from the recharging, however Bluetooth really takes a lot of memory and slows the Trinity, however music plays and Tomtom works! no issues with that, the Radio Clip has remote functions so I can change music while Tomtom is still on, I don't have to minimise Tomtom and go to WMP to change music, I just do it on my Bluetooth device.
However this isn't a perfect solution, as Bluetooth really takes a lot of memory
I looked into using an FM transmitter approach, but there are a lot of FM stations around where I drive, so finding a clear channel gets to be a pain. Also, I'm stupidly picky when it comes to audio quality, which is better using a wired solution rather than the FM solution. Looks like a good apprach though!
hey guys
I bought a £50 car stereo from Lidl
which has a usb port
superb
x
In most cases with FM Transmittors and it depends on the FM Transmittor, it usually dominates the FM Channel, so if you had it on say 104.1 in which in Australia is 104.1 Today FM as long as the Transmittor is nearby and close to your aerial it is all good!
But yeah, I feel that bluetooth and FM Transmission can cause quality lose in Audio, however sometimes I can't tell the difference, I have the USB to 3.5mm converter and I was dumb enough not to find the USB and 3.5mm unit, which was available at that time, but oh well, alls well ends well.
http://cgi.ebay.com/ws/eBayISAPI.dl...item=160180673140&_trksid=p3984.cWON.m313.lVI
I bought this one and works great, it has everything I need, but when I connect it to my stereo, the music has no bass. Still have to figure that one out. Any ideas?
I have a small 2.5mm to 3.5mm adapter, then connect that to one of those tapes with 3.5mm jack. It works great on my PSP, but with my phone the bass is gone. I have 1.23 with GPS and WM5. I have to try different player (Using WMP) and the HTC equalizer & audio manager.
Anyway, I love the setup, everything is together into a cool device.
http://forum.xda-developers.com/showthread.php?t=333607
Hey! Exactly the same setup I had with my old Magician! I had glued the 2,5mm jack to the Brodit holder, so it would connect power and audio at the same time. It was a treat to use!
However, now I have a Sony BT2500 Bluetooth car radio and don't need no connectors (besides USB power) any more.
landshark said:
3.) Best of all, I tried calling my girlfriend (while the Trinity was in the cradle, playing MP3's through my stereo), and a.) her side of the conversation came through my car speakers, with the music muted, and b.) she said she could hear me just fine (but a little loud), which tells me the Trinity continued to use the internal microphone and amplified my voice the same way it would when set on speakerphone!
Mike
Click to expand...
Click to collapse
I have a similar configuration, on my alpine stereo.
Sound quality is great and everything works as you told.. very good but,
when i have a call, i can hear very well from my car speaker but the other side can't hear me my Trinity don't continue to use the internal microphone. I'm quite sure it's a trouble by audio jack to htc usb converter: every post i read i found only Y cables (audio and input power)... mine is 3 way: http://www.gpsforless.co.uk/product_details.php?id=7920
Or maybe a rom trouble? i'm using Bepe's 0.79 WM6...
does exist a cab file witch forces trinity to keep using internal microphone always??
i'm planning to buy a new radio with bluetooth audio streaming capabilities for my Trans Am.
probably this radio:
http://www.amazon.de/LG-MP3-CD-Tune...r_1_1?ie=UTF8&s=gateway&qid=1202059350&sr=8-1
Nice Price, Nice Functions, less Cable-Chaos....
Did anyone try this? I'm thinking of buying a new radio WITH bluetooth..
IF the bluetooth radio stuff works, then tomtom/music could go via my HTC which would be awesome... or is it possible to play MP3's via an USB outlet, or have some auxout to my htc?
A few months ago, I bought a head unit (Dual XHD6425) that has front panel aux out, usb, and bluetooth. I originally got it for its 3.5 mm auxillary out for my ipod, but I then bought the add-on bluetooth module and started using my cellphone and now my Fuze. Bluetooth audio streaming (A2DP) is much more convenient as there are no wires to deal with. The TF3D music program supports AVRC so you can use the unit's fast fwd/rewind/stop buttons to control playback. Tomtom also routes its audio through the bluetooth interface as well. Of course, you also get hands-free calling, which is great as I usually forget to put on or turn on my bluetooth headset when I enter my car.
My head unit could also play music from USB sources (name hard drives, etc, but strangely not ipods). The unit was able to read from the Fuze since it can mount itself as a storage drive providing access to the microsd card. However, in this mode, I'd have to scroll through songs using the unit's interface, which was not very easy to navigate. Still, I can use the USB port to charge/power devices if I needed to do so.
^^^Ditto what he said^^^
My Xterra has a Pioneer single din headunit with built-in Bluetooth. A2DP streaming works great, but sometimes sounds a little tinny or washed-out. If you have added a subwoofer to your vehicle then get a headunit with an independent subwoofer level control. Some songs will be very bassy, while others will need some added punch...this can be adjusted very easily especially with a remote-mount bass level knob.
You can also sync your contacts over to the BT headunits and set speed dials as well as picture dials in some cases. My Pioneer replacement will be a double din 7" touchscreen dvd player with BT. Make sure it has plenty of audio controls/adjustments...digital time correction is a nice feature to help balance sound and set stage.
Bluetooth audio questions - probably rookie-level
I want to stream music/podcasts from my phone (Samsung i907) through my car system. I have installed an AUX RCA setup, so I can now do this with a cable and it's pretty solid.
My question is - are the Bluetooth audio receivers out there - usually relatively cheap - compatible with this setup? Is it as simple as plugging a little BT receiver into my RCA jacks, pairing up my phone, and hitting play?
Any advice/recommendations on receivers/etc. is appreciated. Thanks!
It would help if you state which car / car system.
Polaris paired with Pioneer DEH-P75BT in my car works...
So I just purchased a GROM Audio Honda Acura 03+ USB Android iPod Bluetooth AUX adapter( SKU: HON1U3 )
http://www.gromaudio.com/store/usb_...uetooth_adapter_direct_digital_interface.html
With both the Bluetooth and USB AUX adapter it came to a pricey $229.96. What I got for that price is:
Bluetooth media and headphone profiles
USB out via AALinQ Car Music Player
OK Google Hotword still works
Con's:
You have to load your media into the AALinQ application to get it to play via USB, that means no Google Play music over USB, and all system sounds aren't automatically sent to the USB audio like with the Note 3 and previous Galaxy devices.
You don't get track titles etc via Bluetooth at least with my Note 4 on my '08 Acura MDX and the GROM connected to my XM 2 Sat input on the stock head unit.
I'm getting a weird slight crackle when audio stops and starts playing via Bluetooth, I think this is because the Grom adapter is connecting and disconnecting USB audio to the head unit, I got the same crackle when connecting my MHL USB audio connector when the car head unit was on.
Pro's:
The nice thing is that unlike a dedicated MHL USB connector which is the other way to get USB audio out on the Note 4 you aren't blocking your microphone while connected
You are charging. which I hadn't got working with USB to MHL.
Just thought this might be useful to those of us who don't have A2DP built into our car stereo's. GROM is compatible with hundreds and hundreds of vehicles, just use the Browse by auto make selector at http://www.gromaudio.com/index.html
I don't work for GROM, I paid for my unit myself, wanted to share what worked for me in case it helps one of you.
Oh and according to their FAQ the charge you're getting is 1A 5V http://www.gromaudio.com/support/usb-faq.html