Related
I am using Dutty's 6.1 hybrid Rom. But a major problem is with the vibration. I have selected Vibrate and ring and then the phone vibrates continiously with the ringtone. When it was with the Stock rom the phone didn't vibrate constantly. This is eating a lots of battery ...Pls pls find some way to STOP this.
BTW- Pls don't say that i have to select vibrate then ring option.
When you have it set to vibrate and ring please look at and post the contents of the following registry key:
HKCU\ControlPanel\Sounds\RingTone0
list all values and data
thx
Also make sure you understand the expected behavior:
Vibrate AND ring will mean it will play the ringtone and vibrate all through the ring tone.
Vibrate THEN ring will mean it will vibrate once for a few seconds then play the ringtone.
Which one have you selected and explain what you think it is doing that is not normal....
I think he may be talking about its a constant vibrate rather than a pulsing vibrate, mine does the same thing. I'll get those values here in a minute.
My kaiser sometimes won't stop vibrating after receiving an email(not on sms).
This started to happen after installing no thrills. When i press the power button until the dialog to shutdown appears, and press no the vibrations stop. The only real annoyance is when there is an email in the middle of the night.
ithehappy said:
I am using Dutty's 6.1 hybrid Rom. But a major problem is with the vibration. I have selected Vibrate and ring and then the phone vibrates continiously with the ringtone. When it was with the Stock rom the phone didn't vibrate constantly. This is eating a lots of battery ...Pls pls find some way to STOP this.
BTW- Pls don't say that i have to select vibrate then ring option.
Click to expand...
Click to collapse
Hi,
Maybe this can help:
check reg: HCU - ControlPanel - sounds - RingTone0 - Script
a = activate
V = Vibrate
P = play sound
w= wait
r= repeat
maybe you have something like: avr
You should have something like: av2pw2r
This way you tell the device to activate, then vibrate, then play ringtone, then wait for 2 seconds, the repeat the instruction...
cheers
liquidfork said:
I think he may be talking about its a constant vibrate rather than a pulsing vibrate, mine does the same thing. I'll get those values here in a minute.
Click to expand...
Click to collapse
Well let me tell you something...If you can figure out what is causing it and make it an option, I think HTC will get a whole new fan base of twenty something women!!!
I can see the ad now.... "Hey Ladies, HTC Tilt, not only looks good, but feels great in your pocket!!!!!"
ryncppr said:
Well let me tell you something...If you can figure out what is causing it and make it an option, I think HTC will get a whole new fan base of twenty something women!!!
I can see the ad now.... "Hey Ladies, HTC Tilt, not only looks good, but feels great in your pocket!!!!!"
Click to expand...
Click to collapse
LOL
My script shows av0pw3r.
defp said:
My kaiser sometimes won't stop vibrating after receiving an email(not on sms).
This started to happen after installing no thrills. When i press the power button until the dialog to shutdown appears, and press no the vibrations stop. The only real annoyance is when there is an email in the middle of the night.
Click to expand...
Click to collapse
I get this too, but it doesn't happen with every email. I find just hitting the start button stops it, but if I'm not near the phone, it's really annoying and drains the battery.
I'm using Dutty's 19209 rom. Any ideas?
liquidfork said:
LOL
My script shows av0pw3r.
Click to expand...
Click to collapse
That means:
Vibrate(v) continuously(0) and play ringtone(p) for 3 seconds (w3) then repeat(r).
If you don't want continuous vibration, use something like:
av3pw3r
Vibrate(v) 3 seconds (3) and play ringtone(p) for 5 seconds (w5) then repeat(r).
well then....seems as if i have passed on my little problem to you fine people. i've been complain of this for months now. I have hunted dutty down for many hours to fix this but no luck. from what i can tell the issue has to do with sound.
if you notice it only happens when the phone is promoted to play sound...phone call....text...or email. Sometimes (depending on the radio) if you let it sit for a few seconds (we're talking 40 seconds or so) you'll notice the last half secants of the sound will play, then the vibration will stop. Other times or most of the time, the last bit of the sound does not play, so the phone continues to vibrate.
to tell the truth i've been way to lazy to find out what it is that stops he last bit of sound from playing, but trust me when i tell youz...thats the issue.
my quick fix is to FORCE it to play sound. How? just hit the red phone button. That little beep it makes is all you need. once you hit the end button the vibrating is done. it hasn't happen too many times with the newer builds...but it still happens. its a bug i just accepted.
rzanology said:
well then....seems as if i have passed on my little problem to you fine people. i've been complain of this for months now. I have hunted dutty down for many hours to fix this but no luck. from what i can tell the issue has to do with sound.
if you notice it only happens when the phone is promoted to play sound...phone call....text...or email. Sometimes (depending on the radio) if you let it sit for a few seconds (we're talking 40 seconds or so) you'll notice the last half secants of the sound will play, then the vibration will stop. Other times or most of the time, the last bit of the sound does not play, so the phone continues to vibrate.
to tell the truth i've been way to lazy to find out what it is that stops he last bit of sound from playing, but trust me when i tell youz...thats the issue.
my quick fix is to FORCE it to play sound. How? just hit the red phone button. That little beep it makes is all you need. once you hit the end button the vibrating is done. it hasn't happen too many times with the newer builds...but it still happens. its a bug i just accepted.
Click to expand...
Click to collapse
Thank goodness I'm not alone! I've been having this problem on & off for the last 3 months!. And yes your right rzanology its almost like the phone turns off before the end of the alert which trips it out....
dont worry. i wish this bull sht on all of you! and i am confident you will all run into it sometime
but really...it has been alot better with the new builds. im about to call up att and tell them my phone keeps freezing and its affecting business lol...see if they will send me a brand new one.
rzanology said:
dont worry. i wish this bull sht on all of you! and i am confident you will all run into it sometime
but really...it has been alot better with the new builds. im about to call up att and tell them my phone keeps freezing and its affecting business lol...see if they will send me a brand new one.
Click to expand...
Click to collapse
You sure you GF didn't purposely sabotage you device...buzzzzzzz, ohh baby! ;Dirty_Old_Man_Smiley)
this bug can be remove by the rom builder. so i am requesting mr.dutty to solve this problem. hope you understood what we are saying. we just need pulse vibration rather than the constant vibration like the original htc rom.
Thanks.
Solved
ithehappy said:
this bug can be remove by the rom builder. so i am requesting mr.dutty to solve this problem. hope you understood what we are saying. we just need pulse vibration rather than the constant vibration like the original htc rom.
Thanks.
Click to expand...
Click to collapse
Hi,
Did the solution proposed in post #10 work?
Rafael K said:
Hi,
Did the solution proposed in post #10 work?
Click to expand...
Click to collapse
Sorry buddy i don't want to go to reg editor for a simple thing.
Simple straight answer - much to ask for?
ithehappy said:
Sorry buddy i don't want to go to reg editor for a simple thing.
Click to expand...
Click to collapse
If you haven't applied the reg hack, the question clearly was not directed to you. So let me put that again: Can someone who applied the reg hack in post #10 and is not trying to play the smart### confirm to me if it works on his/her device?
In the meantime: I have tried and put av1pw3r (meaning, according to post #10, that the vibration would last 1 second). I sofreset immediately after and confirmed that the hack sticked.
But got the continuous vibration at least once after that. I'm on Dutty's WM6.1 Hybrid v2 5.2.19716/5.2.19700 with the cube.
I have learnt from experience that I could make the vibration stop if I started a call...
I had this problem when I flashed a ROM and kept the older radio to see how it would work. When I updated the radio it went away. Try changing radios it might work for you.
redmercury said:
I had this problem when I flashed a ROM and kept the older radio to see how it would work. When I updated the radio it went away. Try changing radios it might work for you.
Click to expand...
Click to collapse
Hm, nice idea, will try it out
So it's been a month since I got my HTC Touch pro and all the problems I have with it, I've had with the HTC TYTN II. To list them:
- Volume is too low during conversations, it has to be fairly quiet around to be able to hear the other person (even with the volume turned way up)
- There's a 2-3 ring delay on incoming calls.. which means people hang up before you get a chance to answer.
- Sometimes trying to call a number, the phone will just display the Calling Number screen and you hear no sound at all in the speaker.. then after 10 seconds it will end with 3 beeps.. Like it couldn't get a signal or something, even though there's plenty of signal on the signal gauge. You try again 2-3 times before it works.. REALLY annoying (Never had a phone that did that, other than the TYTN II!)
- Answers calls in pocket. You go for the phone, but the touch screen is on and you answer or hang up (in my case apparently almost always hangs up) while the phone is still in your pocket. Also VERY annoying.
- Alarm or snooze malfunctions. This happens rarely for me, but since I use it everyday as my alarm for waking up, I notice! It's not because I sleep past the alarm. I've been lying awake listening for it to ring... the vibrator works, but no sound is played. This means that I can't trust my phone to wake me up if I'm going to catch a plane or other important stuff. It's very rare, but it happens.. it also did on my TYTN II, except that didn't even vibrate! My guess is windows is busy doing something else .. then doesn't play the sound properly.
- Then there's the slowdowns.. not really a fault, but like windows 95 it can become very slow or unresponsive for a short period for unknown reasons. A phone has to work when you need it... not delay you for 30 secs while it thinks things over. I've had to reset my phone a couple of times this month. (No I didn't run 10 apps at the same time while trying to use TF3D to look at pictures)
- It takes 4 seconds to lock the phone (So that it doesn't also MAKE calls in your pocket) .. is there a way to tweak this? Like only pressing the off-hook button for 1-2 seconds instead?
These problems are the reasons that I'm considering selling my phone to some other unfortunate person. They are BASIC functions that just have to work! I love the HTC touch pro for it's PDA functionality and my Tom Tom maps etc. but I'm really starting to hate it for these basic functionalities that work very poorly!
I know other people have experience the same problems.. couldn't we make a sticky with problems and possible solutions for it? I also really hate that fact that I have to hack my phone in able to make it function properly!
ssndk said:
So it's been a month since I got my HTC Touch pro and all the problems I have with it, I've had with the HTC TYTN II. To list them:
- Volume is too low during conversations, it has to be fairly quiet around to be able to hear the other person (even with the volume turned way up)
Click to expand...
Click to collapse
Tweaks enough around
- There's a 2-3 ring delay on incoming calls.. which means people hang up before you get a chance to answer.
Click to expand...
Click to collapse
I don't have that problem?
- Sometimes trying to call a number, the phone will just display the Calling Number screen and you hear no sound at all in the speaker.. then after 10 seconds it will end with 3 beeps.. Like it couldn't get a signal or something, even though there's plenty of signal on the signal gauge. You try again 2-3 times before it works.. REALLY annoying (Never had a phone that did that, other than the TYTN II!)
Click to expand...
Click to collapse
never had that either
- Answers calls in pocket. You go for the phone, but the touch screen is on and you answer or hang up (in my case apparently almost always hangs up) while the phone is still in your pocket. Also VERY annoying.
Click to expand...
Click to collapse
try this solution
- Alarm or snooze malfunctions. This happens rarely for me, but since I use it everyday as my alarm for waking up, I notice! It's not because I sleep past the alarm. I've been lying awake listening for it to ring... the vibrator works, but no sound is played. This means that I can't trust my phone to wake me up if I'm going to catch a plane or other important stuff. It's very rare, but it happens.. it also did on my TYTN II, except that didn't even vibrate! My guess is windows is busy doing something else .. then doesn't play the sound properly.
Click to expand...
Click to collapse
Did you try a different alarm already?
- Then there's the slowdowns.. not really a fault, but like windows 95 it can become very slow or unresponsive for a short period for unknown reasons. A phone has to work when you need it... not delay you for 30 secs while it thinks things over. I've had to reset my phone a couple of times this month. (No I didn't run 10 apps at the same time while trying to use TF3D to look at pictures)
Click to expand...
Click to collapse
Don't have that problem
- It takes 4 seconds to lock the phone (So that it doesn't also MAKE calls in your pocket) .. is there a way to tweak this? Like only pressing the off-hook button for 1-2 seconds instead?
Click to expand...
Click to collapse
Now you mention it, yes, that is annoying... Would love to see a tweak for that as well!!
These problems are the reasons that I'm considering selling my phone to some other unfortunate person. They are BASIC functions that just has to work! I love the HTC touch pro for it's PDA functionality and my Tom Tom maps etc. but I'm really starting to hate it for these basic functionalities that work very poorly!
I know other people have experience the same problems.. couldn't we make a sticky with problems and possible solutions for it? I also really hate that fact that I have to hack my phone in able to make it function properly!
Click to expand...
Click to collapse
Have you considerd a custom Rom yet? I am currently running the DCS Rom, and don't have the problems you mention above. It made my TP much more responsive!
A lot of these problems though, are mentioned throughout this forum, and can be solved. Either by ROM updating, or tweaks... What Rom are you running?
I understand completely. I feel differently though. My TP is the best phone ever. The issues I have were seen on my previous devices (HTC devices for the US). The faster processor, increased storage, and TF3D make me happy. Don't get me wrong, I have cussed at this phone, missed inportant business calls, and missed a flight thanks to the alarm. I soft reset 1 - 5 times a day to proactively minimize these issues. But overall, the TP is a huge improvement over my Wing. So long as my new devices are improvements to the one before, I am happy. I can't live with a standard cell phone, and love my Raphael.
joeltje said:
I don't have that problem?
Click to expand...
Click to collapse
Try calling your phone from a land line phone.. how long does it take before your cell actually start ringing?
joeltje said:
Did you try a different alarm already?
Click to expand...
Click to collapse
Yes, but it happens so rarely I can't say if its the sound. Besides, it's the rooster sound that came with phone. No matter what it should never happen. It happened on my TYTN II too.. So I guess it's probably a windows thing.
joeltje said:
Have you considerd a custom Rom yet? I am currently running the DCS Rom, and don't have the problems you mention above. It made my TP much more responsive!
Click to expand...
Click to collapse
Hmm.. I might try that.. but I often see people start having entirely different problems with their phone then (lock ups and strange behaviour). If there is a stable ROM that fixes these issues and doesn't break down hard once every week. I'm all for it!
I'm running the standard ROM that came with the phone. Ver.: 1.90.403.6 DAN (Danish) ROM date 08/23/08, Radio: 1.02.25.19, Protocol: 52.33.25.17U
If I call my cellnr. from the home phone, it starts ringning as quickly as all my other mobile phones... So no, I really don't have that problem, thoughj I did just see another topic from somebody with exactly you problem: http://forum.xda-developers.com/showthread.php?t=432415
You might want to follow that.
On the alarm, I have 2 kids, so I don't use an electrical alarm Sorry...
The different ROM may be something you can test at least. It fixed a lot of annoyances for me anyway. Look in the Wiki for different Custom Roms, there are a couple out there, and for me, DCS worked best. You can always go back to original, should you not like the ROM. I'm running DCS now for three days, no resets, and it is still fast....
ssndk said:
- Sometimes trying to call a number, the phone will just display the Calling Number screen and you hear no sound at all in the speaker.. then after 10 seconds it will end with 3 beeps.. Like it couldn't get a signal or something, even though there's plenty of signal on the signal gauge. You try again 2-3 times before it works.. REALLY annoying (Never had a phone that did that, other than the TYTN II!)
Click to expand...
Click to collapse
The issue above really annoying. Normally that will cause my TP to go mute and can't hear each other. Have to soft reset. This issue is discuss in another thread here. Since I'm overseas for at the moment, can't go complain to my vendor.
ssndk said:
- It takes 4 seconds to lock the phone (So that it doesn't also MAKE calls in your pocket) .. is there a way to tweak this? Like only pressing the off-hook button for 1-2 seconds instead?
Click to expand...
Click to collapse
Using the registry hack for the touch diamond I'm now using the "lock on backlight turned off" fix.. it works, and my phone locks when I press the screen off button. Way less annoying than waiting 4 seconds for it to lock.
HKEY_CURRENT_USER\ControlPanel\BackLight\AutoDevic eLockEnable from 0 to 1 and everytime your backlight goes off the device is locked
Nice, 1 Question though; What happens if you make a call? The display goes of as well then, will the keyboard then lock as well? Cause that's not handy, to say the least
joeltje said:
Nice, 1 Question though; What happens if you make a call? The display goes of as well then, will the keyboard then lock as well? Cause that's not handy, to say the least
Click to expand...
Click to collapse
The touch screen locks, but the keyboard (Off-hook etc.) button doesn't..
So if I'm listning to my voicemail, and need to press "3" for deletion, I can't? Or will it disable after I extract my stylo?
joeltje said:
So if I'm listning to my voicemail, and need to press "3" for deletion, I can't? Or will it disable after I extract my stylo?
Click to expand...
Click to collapse
you can extract the stylus but the you have to juggle around with it OR you can press the standby button on top to unlock it. It's a pain I know but the problem is that it is a touch screen so pressing a button to unlock is less worse than without it.
So functionality actually remains as it is now... That's good, I'll give it a try!
joeltje said:
So if I'm listning to my voicemail, and need to press "3" for deletion, I can't? Or will it disable after I extract my stylo?
Click to expand...
Click to collapse
It unlocks when the stylus is extracted..
ssndk said:
So it's been a month since I got my HTC Touch pro and all the problems I have with it, I've had with the HTC TYTN II. To list them:
- There's a 2-3 ring delay on incoming calls.. which means people hang up before you get a chance to answer.
I know other people have experience the same problems.. couldn't we make a sticky with problems and possible solutions for it? I also really hate that fact that I have to hack my phone in able to make it function properly!
Click to expand...
Click to collapse
Sounds like you are using a ringtone from your microSD card. This will cause a delay. Your ringtones need to be copies to your device and activated by holding the stylus over your selection & hit set as ringtone.
Hope this helps,
Rgs,
J
ssndk said:
The touch screen locks, but the keyboard (Off-hook etc.) button doesn't..
Click to expand...
Click to collapse
Try SensorLock. It's a great little utility that unfortunately has stopped working for me. Must be something I poked somewhere. lol
As for the alarm, mine works fine... but I do notice the ringing a couple of times on the sending end before the phone starts to ring. I'd sort of passed that off to a network thing, not a phone thing.
The 3 second ringtone delay is a WM issue. Look at the postings for VAlert in the general hacking section. The only known fix is http://www.tweaks2k2.com/portal/staticpages/index.php?page=20050224182009983
but no one seems to have figured out their registry setting change...
Quote:
- Alarm or snooze malfunctions. This happens rarely for me, but since I use it everyday as my alarm for waking up, I notice! It's not because I sleep past the alarm. I've been lying awake listening for it to ring... the vibrator works, but no sound is played. This means that I can't trust my phone to wake me up if I'm going to catch a plane or other important stuff. It's very rare, but it happens.. it also did on my TYTN II, except that didn't even vibrate! My guess is windows is busy doing something else .. then doesn't play the sound properly.
TRY G-Alarm. It works well for me.
Klaxon (sp?) alarm looked cool and would have also been practical, but it would crash - totally unreliable.
[email protected] said:
Sounds like you are using a ringtone from your microSD card. This will cause a delay. Your ringtones need to be copies to your device and activated by holding the stylus over your selection & hit set as ringtone.
Hope this helps,
Rgs,
J
Click to expand...
Click to collapse
No, in my TPro the delay is exactly the same (oviously using the same mp3 file in memory card or in the device)..i've reduced delay sound installing Diamond tweaks and setting "without delay" in ring tone..then i've erased diamong tweaks because use too much battery now i have only 1 ring with light (and identified call incoming on the screen) and without sound, and BEFORE the second ring my device correctly sound
bugsykoosh said:
The 3 second ringtone delay is a WM issue. Look at the postings for VAlert in the general hacking section. The only known fix is http://www.tweaks2k2.com/portal/staticpages/index.php?page=20050224182009983
but no one seems to have figured out their registry setting change...
Click to expand...
Click to collapse
If your referring to this one,
108-Allow users to disable the 3 seconds delay between rings in devices with Windows Mobile Phone Edition
Click to expand...
Click to collapse
see the following thread at PPCGeeks.
If your talking about the fact that the NAV wheel starts flashing 5 seconds before the audio starts playing, then it's not the same scenario.
ssndk said:
Using the registry hack for the touch diamond I'm now using the "lock on backlight turned off" fix.. it works, and my phone locks when I press the screen off button. Way less annoying than waiting 4 seconds for it to lock.
HKEY_CURRENT_USER\ControlPanel\BackLight\AutoDevic eLockEnable from 0 to 1 and everytime your backlight goes off the device is locked
Click to expand...
Click to collapse
I have a HTC TouchPro and had the same issue of not wanting to press the long press end key for 5 seconds to lock the phone. I tried the code you gave and unfortunately the phone still does not lock when I push short press the power button to turn off the back light and put th phone in sleep mode. I really want this to work since when I am driving, I think when I go through good and bad coverage areas, the phone will automaticallly wake up about 3 times each way, so if it is not locked, I can accidentally call people while driving.
Ever since i installed wm6.5 (and I tried a few) I am have trouble accepting incoming calls. This is different from the lock screen issue. Whenever I get an incoming call i see it and either hit the hard key or slide left on-screen to accept but it doesn't answer but continues to ring. if I slide then the slider gets stuck all the way to the left until it stops ringing.
Any ideas as to what could cause this, I have this on different wm6.5 roms, and my friend who has the same wm6.5 rom has no problems.
Please help
well turns out it does answer but takes like a few secs to engage so if i click to answer late in the ring it doesnt have time to answr b4 the person goes to voicemail. i did use trapcall b4, and have now cacelled, maybe it is causing my problems?
any info of how I can reset att to default settings like voicemail and get 100% rid of trapcall.
I got this from a different thread and saved it to my computer just in case I bumped into this problem. I don't know if it'll work on 6.5, but you might want to give it a try:
I had the same problem as many others: When data is on (active or dormant, EVDO or 1xRTT (dormant), it takes many seconds for the calls to be answered, the phone keeps ringing even though I pressed the answer key.
It does appear that one of the tweak applications created the problem, at least for some. After much research, this may be it...
Take a look at your HKLM/Comm/ConnMgr/Planner/Settings/SuspendResume
It is a multi-sz value and should be #777. If it shows anything like ~GPRS or something containing GPRS, change it back to #777 and soft reset.
When I used PHM Regedit to correct this, it seemed to crash (the reg editor never crashed before now). I had to use SKTool's regedit. I will create an export if this will help you.
Once I changed it back to #777, I can answer the call immediately when data is on, time and time again. Prior to this, there was a significant delay.
Dude, thank you so much, I cant believe it was so simple. But I'm confused how it happened in the first place. Anyways yeah, changing SuspendResume to #777 works wonders.
I've got a slightly different Slide To Answer issue.
I just updated to the newest HTC stock rom for my Touch Pro.
I noticed on the first call that Slide to Answer was part of this rom.
It seemed to work well but suddenly I lost the slide button. The green bar for answer and red for reject are still there but the slider itself has disappeared. The only other thing I have changed since the rom upgrade is to add a cab file (from an XDA thread) that restored my Chinese fonts. Could something in that have disabled the button graphic?
What else could it be? How do I get this button back?
Also, is there a way to customize the Slide to Answer screen?
Rom: 5.07.707.2 WWE
Radio: 1.11.25.01
The Slide-to-Answer, for whatever reason, never worked right on my Fuze, so I just disable it.
Hiya.
Longtime lurker, firsttime poster. I'm currently experiencing an issue with my Sprint HTC Touch Pro 2. I've had it for about a week now, and this problem seems to come and go. I'm using the stock ROM and TouchFlo3d; though I've also been playing around with the SPB Mobile Shell 3.5 (love the widgets!). Anywho, the issue (finally):
When I get a phone call, the callerID pops up and I have the slide-to-answer screen. I can either slide to the left or slide to the right (now dip, baby, dip) (sorry). When I slide to the left, most of the times the entire answer button turns green and the phone just keeps ringing. Like, I'm TRYING to answer it... but it won't let me! About 20% of the time, though, it slides successfully all the way over and I can then talk. But - again - most of the time it just turns green and I can't answer it. Even if I press the hard button on the lower left of the phone (the "phone" button).
Anyone have any ideas/suggestions/tips/tricks on how to fix this? With slide-out keyboards on a touch screen phone called the Touch Pro (2), it sure as hell is hard to google around for an answer! RTFM didn't help, either.
Thanks in advance to anyone who might be able to help me out, here.
msottile said:
Hiya.
Longtime lurker, firsttime poster. I'm currently experiencing an issue with my Sprint HTC Touch Pro 2. I've had it for about a week now, and this problem seems to come and go. I'm using the stock ROM and TouchFlo3d; though I've also been playing around with the SPB Mobile Shell 3.5 (love the widgets!). Anywho, the issue (finally):
When I get a phone call, the callerID pops up and I have the slide-to-answer screen. I can either slide to the left or slide to the right (now dip, baby, dip) (sorry). When I slide to the left, most of the times the entire answer button turns green and the phone just keeps ringing. Like, I'm TRYING to answer it... but it won't let me! About 20% of the time, though, it slides successfully all the way over and I can then talk. But - again - most of the time it just turns green and I can't answer it. Even if I press the hard button on the lower left of the phone (the "phone" button).
Anyone have any ideas/suggestions/tips/tricks on how to fix this? With slide-out keyboards on a touch screen phone called the Touch Pro (2), it sure as hell is hard to google around for an answer! RTFM didn't help, either.
Thanks in advance to anyone who might be able to help me out, here.
Click to expand...
Click to collapse
Hi, a friend has the same device and had the same problem, he solved it by going to the site of HTC and get the updates and now the problem is gone, also is there already many rom update`s there to windows mobile 6.5
Succes,
Greetz from Holland
Thanks mate. Unfortunately, though - that didn't work. :\
In the download section at HTC's site, it states: "This update can only be applied to ROM version 1.20.xxx.x or previous, otherwise the update will fail."
I'm on ROM version 1.21.651.3.
I went ahead and tried to DL and install the CallerID Update - but it wouldn't install. I received the "This hotfix is not compatible with your device" error message.
Any other suggestions? Oh, btw FWIW - this runs Windows 6.1. 6.5 isn't yet available for the Sprint HTC Touch Pro 2 (or so I hear). Thanks again!
msottile said:
Thanks mate. Unfortunately, though - that didn't work. :\
In the download section at HTC's site, it states: "This update can only be applied to ROM version 1.20.xxx.x or previous, otherwise the update will fail."
I'm on ROM version 1.21.651.3.
I went ahead and tried to DL and install the CallerID Update - but it wouldn't install. I received the "This hotfix is not compatible with your device" error message.
Any other suggestions? Oh, btw FWIW - this runs Windows 6.1. 6.5 isn't yet available for the Sprint HTC Touch Pro 2 (or so I hear). Thanks again!
Click to expand...
Click to collapse
Try this Site scroll to bottom of page,give your serial and see if you can download it,maybe you must unlock your CID first to install it
negative. Didn't like my serial number. Regardless, everything I've read so far has said you can't really upgrade a US/Sprint/CDMA HTC Touch Pro 2 to Windows Mobile 6.5.
*sigh*
If only the phone part of the phone worked... this would be one helluva phone!
Will see what i can do have a orginal wwe 6.5 (from htc site) for it, but i think you must unlock touch pro2 orelse it will say invalid vendor i will upload it today and put a link here
EDIT--you can download HERE the Wm 6.5 (download the 2 files,click the .exe) unpack and Happy Flashing...I Have NOT Flashed it,because i have no touchpro2
Greetz from Holland
I have the exact same problem
Anybody got this resolved yet? I am running wm6.5 stock rom from sprint on my touch pro 2...
I'm having the same issue with my stock 6.5 rom.
phone rings but sometimes either slide to answer and hard button answer does not work.
Since I have not found a answer to this I will be doing a hard reset to see if it fixes
planedoctor said:
I'm having the same issue with my stock 6.5 rom.
phone rings but sometimes either slide to answer and hard button answer does not work.
Since I have not found a answer to this I will be doing a hard reset to see if it fixes
Click to expand...
Click to collapse
Any luck? I still have this issue.
A mobile phone that won't answer calls....
... seems a lot like sex without orgasms...!
I have the Sprint HTC TouchPro2 with the stock ROM, no additionally software installed, and yawp! Maybe 15-20% of the time I am able to answer calls. Grrrrr. I've been an HTC user prettymuch from day one, and this is the *laggiest* and *buggiest* phone by far! Normally, I customize and flash ROMs like crazy, but I have *no* interest in doing so with this phone... it should work out of the box, and it simply doesn't.
I have insurance, and keep taking my brand new phones back to Sprint. They look at it, and tell me to come back in two days when they'll have a new phone for me - at least that part is hassle-free. :/ I am now on my FOURTH new phone - all with the same 'unable to answer calls' problem- slide to answer jst slides to the green and freezes there; trying to use the answer button (bottom left bottun on the face of the phone) doesn't work either, and a minute or so after pressing it, I get the message, "unable to open sendkey.exe" blahblahblah,*and* each0hone I've received has multiple other problems: severe lag and freezing, sometimes the screen goes black, or pixelated so you can't see anything, SMS won't open (using the winmo, not HTC SMS shell, even), etc., etc., ad naseum.
I figure this will keep happening until the WinMo7 phones arrive in January2011 (almost there, anyway, since it is now the end of December!), after which I can request one of those instead of this brick.
I've had to tell my friends and family to text me if they want to talk to me on the phone, and I'l ring them back.
(other things I *really* dislike about this phone are: no external camera button, no external internet browser button, no 'ok' button, no scroll buttons, no flash for the camera, oh hellz: the list goes on and on! And, really - I adore HTC... but! this is their crummiest phone by far....)
So ive been using my sensation for 2 weeks and for the last 2 days, alot of the call I get only have the "end call" button and no green answer call. So i can either just let it ring or cut the call.
Obv. there are no hardware buttons... !? PLEASE HELP! thanks.
update:
here is a screenshot of what I mean...
hxxp://i54.tinypic.com/2h38v2h.jpg
copy / paste please, i cant post links yet
In the words of a very wise man, have you tried turning it off and then on again?
I had a glitch in my phone. Turn off fastboot and then restart he phone. The option is in the Power options.
Or if you have an app called Mr. Number, it has this effect too. It's just not compatible.
yea, tried all the usual
When I got the phone after a few days it started happening... out of the box, no rooting/play around sense 3 all intact.
the I reset the phone to factory from the boot loader. problem came back after a while.
no, I'm using "go launcher" i don't have lots of apps, i run it light so save on ram and battery (hence "go launcher" and no "sense 3.0") and the problem is back. It happen to certain numbers first but now it seems to be the case with all of them.
Ive tired fast boot and everything.
one thing ive installed consistently through every scenario is "google voice", i really love it. I will try uninstalling it if anyone thinks its plausible. I think its just gingerbread messin around. I googled the issue and this is all i could find..
code.google.com/p/synergy-thunderbolt/issues/detail?id=24
sounds like the guy has the same issue but I cant find a correlation.
here is a screenshot of what I mean...
hxxp://i54.tinypic.com/2h38v2h.jpg
copy / paste please, i cant post links yet