CAMERA stopped working after HardSPL patching - Tilt, TyTN II, MDA Vario III Windows Mobile ROM De

I have just HardSPL-ed my HTC Kaiser, flashed a new radio ROM (1.27.14.09 - original was 1.27.12.11) and my camera is not working anymore.
The camera software runs OK, but only black screen is showing, nothing else, after trying to capture a picture it says:
"Unable to capture photo. Unable to get frame data from camera device".
What I noticed on the tricolor screen (when you press power button and camera button + soft reset with stylus) is:
before HardSPL patching: KAIS160
after HardSPL patching: KAIS130
Eh?!
Any hints how to make my camera working again without reflashing the original ROM would be great.
Thanks,
Gabriel

hi mate retuning back, audio and more other software not working, only for Tilt phone, this radio not working on htc base model.
Bye

Flashed back the original radio and everything works again. Thx energy59 for help.

Related

Camera not working after upgrading

I just download newest ROM from dopodasia for my dopod 818pro. This is the rom: RUU_Prophet_2151327_21513121_021921_DOP_ASIA_WWE_Ship.
But after upgrading the camera won't work. when I pressed the camera button on the left side nothing comes out. Only black screen. Anyone know how to solved this problem?
TQ.

htc prophet stuck on boot screen

I have a Qtek S200 and have been using the Prophet_Orange_UK_Rom. I decided this morning to revery back to my initial upgrade PDAMobiz_Prophet_WM6_V1.00 Rom. However in the middle of the update process in step 2, something happened which caused the update to fail.
No my qtek starts and gets stuck on the boot screen where you see the orange logo and IPL, SPL etc... info. When I plug the usb cable, there's no message from my computer (and no ack from activesync) but the power led shows it's charging. Any ideas as to what I can do? I've tried hardware reset several times and after saying Format is completed!, I end up with the same stuck-up boot screen.
Thanks for your big help!
done it
sorry for the bother. Was doing hardware reset with both cam and comm buttons pressed. Did not know about boot reset with comm button only...
hi, may i know what you did after you went to bootloader?
my dopod 818pro just struck at the three color screen.
pls help.
I read Wiki, reflashed ROM. Now ok.

My Prophet is DEAD PLEASE HELP !

Guys, I was trying to install PDAVIET ROM and during the DOS screen I had a problem with my computer and now my Prophet (G4 - WM5) only stay at the beggining screen (QTEK one). What should I do please! I am almost crying here !!!!
I tryed to Hard reset and it did not work.
It seems that the OS changed to 4.0.0.0 now. It was something like 2. ...
GUYS I GOT IT.
FOR PEOPLE WHO HAS ANY PROBLEM WITH DEAD S200 I THINK CAN FOLLOW THIS:
- HOLD THE CAMERA BUTTON AND THEN PRESS THE SOFT RESET BUTTON (WITH THE STYLLUS PEN)
- A COLORED SCREEN WILL APPEAR
- RUN RUU-Prophet-AKU2.2-2.20-2.47.21-Jester-r1
(http://forum.xda-developers.com/showthread.php?t=284578)
- THE CELLPHONE IS BACK TO LIFE !!!!
install the NVID 2.20 from bootloader mode 3 colors screen

Can't Flash! Stuck on the three color bars screen

Hello again,
I been flashing ROMS for a while now but now I having some problems that I can't solve.
Since I installed the Laurentius26_KaiserDiamond_V10 I can't update the rom anymore. The Kaiser connects to the update, the update program confirms the connection (it checks if the battery is above 50%, confirm the previous fiirmware, etc.)
When the program shows the progress bar (On the PC) the kaiser screen blimp one time to the grey screen (the one with the progression bar) and turn back to three collors screen (in less than a second). After one or two minutes the program (on the PC) gives a erro message.
I have to reset the Kaiser but no ROM was installed
Does anyone know how to solve this problem? I'm using SPL 3.29 but I have already tried Hard SPL 3.28 and back to the 3.29 again.
Thanks
Hi there,
That happened to me too. What I had to do was to download the original rom from HTC and flash that. After, i did the usual: hard reset, remove batter, restart computer. Then I could flash
Michael
Diamond: dutty 1.8 full
Kaiser: Romeos 4.3
Check the link in My Sig.
Ta
Dave
I tried your sugestions. Tried to flash the original Orange ROM but had the same problem as the cooked ROMs. It stopped at the three colors screen.
I think myh problem is a little different from other cases here. My phone is working with the Rom it have right now. It only got stuck on the three color screen when trying to flash a new Rom. To remove the screen is just reset it (normal reset, no hard reset) and it goes back to 'normal' but with the old rom. Can't flash a new one
Also tried the mtty.exe method, but when I open the mtty it shows "CLIENT". If I push any key it shows one more "CLIENTE". after 34 "CLIENT" Messages (it shows "CLIENTCLIENTCLIENTCLIENT" it freezes...
Can someone help me please?
Thanks
Try flashing the new Hard SPL be cmonex.
http://forum.xda-developers.com/showthread.php?t=420683
Thanks
Dave

After flashing magldr 1.12 phone stuck on white screen with green logo

Hello
after installing magldr 1.12 (wanted to try win7) my htc hd2 is stuck on white screen with htc logo. I saw simmilar posts how to solve this problem but holding down volume key and pressing turn on button doesnt boot into four colour screen it is still white screen with green logo
1.66 rom eastern europe was installed and 2.08hspl, however I didnt install any radio How to get back to rom
Thank you in advance
any solution to this problem?? i am having same issue. thnx
Can you post step-by-step what you did?
Did You make task29 before magldr?
White screen after magldr 112 - help !
titjukaz said:
hello
after installing magldr 1.12 (wanted to try win7) my htc hd2 is stuck on white screen with htc logo. I saw simmilar posts how to solve this problem but holding down volume key and pressing turn on button doesnt boot into four colour screen it is still white screen with green logo
1.66 rom eastern europe was installed and 2.08hspl, however i didnt install any radio how to get back to rom
thank you in advance
Click to expand...
Click to collapse
hello
i have the same problem !
have you found the solution ?
Please , answer me ....
Thanks
alessanro - venice - italy
same problem here please help
After flashing Magldr the Phone Reboots but gets stuck at the Splash Screen
You most probably have an older incompatable Radio on your phone. The Radio needs to be at LEAST 2.08.50 and the .50 is very important as it means the Radio is 576 RAM compatable (as stated in post1). The Radio I recommend is 2.15.50.14 and you can download it *HERE*. Boot your phone into the Bootloader Screen and flash a newer Radio and everything should be fine
White screen of death
I have the same problem.
Installed:
* HardSPL 3.00
* Radio 2.15.50.14
* MAGLDR 1.13 - here I got the same problem as all in this thread: white screen with HTC logo after reboot hanging forever. MAGLDR doesn't load by switching off, pressing and holding volume down and power buttons.
Any solution to this?
Wow! Got MAGLDR installed finally… after several cycles of different installations.
Here is what I found:
My original SPL was 3.00-0000, so previously I tried installing 3.00-HSPL. That didn’t work.
Now I installed exactly 2.08-HSPL version and here we go – I see MAGLDR menu now!
Good luck everyone! I hope this will help others with the same problem. I think we all need to read carefully (about 2.08) )))

Categories

Resources