Guys, I was trying to install PDAVIET ROM and during the DOS screen I had a problem with my computer and now my Prophet (G4 - WM5) only stay at the beggining screen (QTEK one). What should I do please! I am almost crying here !!!!
I tryed to Hard reset and it did not work.
It seems that the OS changed to 4.0.0.0 now. It was something like 2. ...
GUYS I GOT IT.
FOR PEOPLE WHO HAS ANY PROBLEM WITH DEAD S200 I THINK CAN FOLLOW THIS:
- HOLD THE CAMERA BUTTON AND THEN PRESS THE SOFT RESET BUTTON (WITH THE STYLLUS PEN)
- A COLORED SCREEN WILL APPEAR
- RUN RUU-Prophet-AKU2.2-2.20-2.47.21-Jester-r1
(http://forum.xda-developers.com/showthread.php?t=284578)
- THE CELLPHONE IS BACK TO LIFE !!!!
install the NVID 2.20 from bootloader mode 3 colors screen
Related
I have a Qtek S200 and have been using the Prophet_Orange_UK_Rom. I decided this morning to revery back to my initial upgrade PDAMobiz_Prophet_WM6_V1.00 Rom. However in the middle of the update process in step 2, something happened which caused the update to fail.
No my qtek starts and gets stuck on the boot screen where you see the orange logo and IPL, SPL etc... info. When I plug the usb cable, there's no message from my computer (and no ack from activesync) but the power led shows it's charging. Any ideas as to what I can do? I've tried hardware reset several times and after saying Format is completed!, I end up with the same stuck-up boot screen.
Thanks for your big help!
done it
sorry for the bother. Was doing hardware reset with both cam and comm buttons pressed. Did not know about boot reset with comm button only...
hi, may i know what you did after you went to bootloader?
my dopod 818pro just struck at the three color screen.
pls help.
I read Wiki, reflashed ROM. Now ok.
Hi fellas, I have a I-mate Jamin (Prophet) G4
While upgrading to RUU_Prophet_220734_22-7114_024721_NVID.exe, I lost ActiveSync synchronisation. This was while it was copying the extended ROM. Now when I did the hard reset, it only shows the Qtek splash screen and doesn't do anything else. Is there any way to rescue the XDA?
Thanks!
hi...
i faced the same problem before
you need to go to bootloaded mode (press camera button and soft reset)
you will get tri colour screen...
Flash again....
it will get stuck at 85% but wait for the 100% completion.
restart...
Hello again,
I been flashing ROMS for a while now but now I having some problems that I can't solve.
Since I installed the Laurentius26_KaiserDiamond_V10 I can't update the rom anymore. The Kaiser connects to the update, the update program confirms the connection (it checks if the battery is above 50%, confirm the previous fiirmware, etc.)
When the program shows the progress bar (On the PC) the kaiser screen blimp one time to the grey screen (the one with the progression bar) and turn back to three collors screen (in less than a second). After one or two minutes the program (on the PC) gives a erro message.
I have to reset the Kaiser but no ROM was installed
Does anyone know how to solve this problem? I'm using SPL 3.29 but I have already tried Hard SPL 3.28 and back to the 3.29 again.
Thanks
Hi there,
That happened to me too. What I had to do was to download the original rom from HTC and flash that. After, i did the usual: hard reset, remove batter, restart computer. Then I could flash
Michael
Diamond: dutty 1.8 full
Kaiser: Romeos 4.3
Check the link in My Sig.
Ta
Dave
I tried your sugestions. Tried to flash the original Orange ROM but had the same problem as the cooked ROMs. It stopped at the three colors screen.
I think myh problem is a little different from other cases here. My phone is working with the Rom it have right now. It only got stuck on the three color screen when trying to flash a new Rom. To remove the screen is just reset it (normal reset, no hard reset) and it goes back to 'normal' but with the old rom. Can't flash a new one
Also tried the mtty.exe method, but when I open the mtty it shows "CLIENT". If I push any key it shows one more "CLIENTE". after 34 "CLIENT" Messages (it shows "CLIENTCLIENTCLIENTCLIENT" it freezes...
Can someone help me please?
Thanks
Try flashing the new Hard SPL be cmonex.
http://forum.xda-developers.com/showthread.php?t=420683
Thanks
Dave
prophet boot problem (The pda hangs at the splash screen not the 3-colored bootscreen.)
One day my pda crashed and I had to hard reset it (WM6 rom was on it), since then the prophet does not boot anymore.
Since I did not have the rom anymore I downloaded another WM6.1 rom that i found true xda-developpers.com.
This was rom WM6.1 Prophet_shadow_20_TE.
after this the problem was the same The PDA hangs at the splash screen.
Then i downloaded an original rom: RUU_Prophet_220734_2207114_024721_NVID.exe NVID ROM
Also after this rom update the problem stays the same.
I tried the procedure in http://wiki.xda-developers.com/index.php?pagename=Prophet_recovery
problem stays the same
I tried the procedure in http://forum.xda-developers.com/showthread.php?t=353547
problem stays the same
I have read that first the IPL is launched wich launches the SPL wich should launch the OS.
If it passes the 3-colored boot screen and hangs at the splash screen, is the problem then related to IPL, SPL or os? or something else?
for the moment i have:
IPL: 2.20.001
SPL: 2.20.001
GSM: 02.47.21
OS: 2.20.7.34
With every action i did the IPL/SPL and OS changed and also the splash screen changed.
But the PDA hangs every time at the splash screen.
Do you guys have any other idea that might help?
Thanks in advance.
You must have flash a WM5 Rom, WM5Rom. OK - Not a WM6 Rom. So many treads are here, and allways the same question.
NEO,
thanks for the quick answer.
forgive me if it is a stupid question but isn't the ROM "RUU_Prophet_220734_2207114_024721_NVID.exe" a WM5 ROM?
If not wich should i use then.
Maybe, try it. In germany we have the Qtek 2.20.739 GER, NVID or the orig. O2 Rom from O2 download side. You must take your prophet in Bootlaoder Modus, then the USB cable to your PC and flash the WM5 Rom, with no ActiveSync. Afterwords look for HardSPL and than you can flash the WM6 Roms. But plz read here so many treads or teh wiki. I am lazy to answer allways the same questions.
I already tried it like mentioned in my first post.
The procedure wich I followed in the link below did not solve the problem.
http://wiki.xda-developers.com/index.php?pagename=Prophet_recovery
I'm still looking in the forums for an answer to why this happens.
I don't believe i'm asking a question without searching for the solution!
R6_ke said:
I already tried it like mentioned in my first post.
The procedure wich I followed in the link below did not solve the problem.
http://wiki.xda-developers.com/index.php?pagename=Prophet_recovery
This link doesn`t help. Brother I don`t know what you do, but this is the right way. If this is not work on your prophet, than it`s good for door stopping.
Click to expand...
Click to collapse
Right, i think i know what you have done... like many other here.
You did have wm5 rom on your device. You then tried to flash a wm6 rom WITHOUT hardspl you phone first...... big mistake as this has probably bricked your phone
When it starts up, is you ipl, spl, os info show up or does it hang on the 1st splash screen. I ask this because on there are 3 screens in total. 1st boot screen, 2nd shows ur info, then 3rd screen then device starts (at least i think hehe)
I have a feeling its ****ed, but let me know if you ipl info shows.
hello timmymarsh,
Thx for your reply.
I originlly had WM6 on my device and everything was working fine, one day the pda crashed (screen was black and stayed black) the only thing i could do was do a hard reset. after this the pda hanged at the boot screen.
I don't know exactly anymore what IPL;SPL and so one was showing when booting the pda.
But after i hard reset the phone the booting got stuck on the HTC splash screen.
Next thing i tried, was to restore the RUU_Prophet_220734_2207114_024721_NVID.exe NVID ROM
after this rom was installed (no errors update went just fine)
i got a white screen with the text HTC inovation, in this screen i can see IPL adn SPL just a fraction of a second and then they dissapear
IPL: 2.20.0001
SPL: 2.20.0001
Next i get the standard blue Q-tek splash screen (with the clouds at the bottom):
IPL: 2.20.0001
SPL: 2.20.0001
GSM: 02.47.21
OS: 2.20.7.34
to answer your question: for the moment i see the white HTC inovation screen, the i see the bleu QTEK "keep the world in one" screen wich shows:
IPL: 2.20.0001
SPL: 2.20.0001
GSM: 02.47.21
OS: 2.20.7.34
Hello
after installing magldr 1.12 (wanted to try win7) my htc hd2 is stuck on white screen with htc logo. I saw simmilar posts how to solve this problem but holding down volume key and pressing turn on button doesnt boot into four colour screen it is still white screen with green logo
1.66 rom eastern europe was installed and 2.08hspl, however I didnt install any radio How to get back to rom
Thank you in advance
any solution to this problem?? i am having same issue. thnx
Can you post step-by-step what you did?
Did You make task29 before magldr?
White screen after magldr 112 - help !
titjukaz said:
hello
after installing magldr 1.12 (wanted to try win7) my htc hd2 is stuck on white screen with htc logo. I saw simmilar posts how to solve this problem but holding down volume key and pressing turn on button doesnt boot into four colour screen it is still white screen with green logo
1.66 rom eastern europe was installed and 2.08hspl, however i didnt install any radio how to get back to rom
thank you in advance
Click to expand...
Click to collapse
hello
i have the same problem !
have you found the solution ?
Please , answer me ....
Thanks
alessanro - venice - italy
same problem here please help
After flashing Magldr the Phone Reboots but gets stuck at the Splash Screen
You most probably have an older incompatable Radio on your phone. The Radio needs to be at LEAST 2.08.50 and the .50 is very important as it means the Radio is 576 RAM compatable (as stated in post1). The Radio I recommend is 2.15.50.14 and you can download it *HERE*. Boot your phone into the Bootloader Screen and flash a newer Radio and everything should be fine
White screen of death
I have the same problem.
Installed:
* HardSPL 3.00
* Radio 2.15.50.14
* MAGLDR 1.13 - here I got the same problem as all in this thread: white screen with HTC logo after reboot hanging forever. MAGLDR doesn't load by switching off, pressing and holding volume down and power buttons.
Any solution to this?
Wow! Got MAGLDR installed finally… after several cycles of different installations.
Here is what I found:
My original SPL was 3.00-0000, so previously I tried installing 3.00-HSPL. That didn’t work.
Now I installed exactly 2.08-HSPL version and here we go – I see MAGLDR menu now!
Good luck everyone! I hope this will help others with the same problem. I think we all need to read carefully (about 2.08) )))