Help
i have a XDA II running WM6 and a Vario running WM6 as well. I am also running the latest version of Activesync.
Whenever i connect either of my phones up to my PC they are not detected and Activesync does not kick in, although they do charge.I have also tried soft reseting the phones but that doesnt work either.
Yesterday I tried uninstalling Activesync and reinstalling and that worked na di was able to sync, but today when i plug either phone in, nothing!
Related
Hi there,
after updating from AS3.8 to version 4.0, AS doesn't connect anymore. I uninstalled and re-installed several times as well w/o any success. Any help would be appriciated.
try removing the old parthership in application data in documents and settings prob under ms activesync
Try to install the latest oficial release of Activesync 4.0 (Build 4343) then with the PPC on the cradle and the PC within Windows, swap your cradle's USB cable to some other port on your PC. It will go through the "new device" detection process again and it should work this time. At least it worked for me...
Good luck!
Rayan
Strange enough... after this has been a problem for about three days and I tried a lot including several reboots of my PC or soft resets of my XDA II, it just connected while I had the device sitting in the cradle for charging... so, I cannot say why it works now, but most important it does
Thanks anyway, guys!
Hey all, new to the forum.. great site with some great info! I currently own a hermes, and upgraded to wm6.. however, when i connect to active sync through my usb, it gives me this noise (regular usb connect sound doubled) and active sync cannot detect my device. Shortly after it just disconnects and goes to charging. I know this is not a usb port issue because i have tried all ports, connected my digital camera etc etc. What could be the problem? Any help is appreciated... because having 25% of my contacts is a pita!! lol
Are you using the USB cable that came with your phone?
I have many USB devices and find that some of the cables do not work due to the amount of pins that are connected at each end.
Also what version of OS do you use and activesync/WMDC?
I have same problem with WM6 and ActiveSync4.5. I'm using the same USB cable I was prior to upgrading to WM6 and never had any problems back then. Have also tried uninstalling and reinstalling AS but still no luck
Right now, I'm trying to find some other alternatives to AS which can sync Outlook contacts and calendar appointments etc.
Quick question, when you guys connect does activesync get stuck at Retrieving Settings????
I get problems with the actual syncing of information. The device is recognised and sync starts, it just takes ages and can fail sometimes.
Other days it syncs straight away without problems.
WM6 AUS ROM
Vista
WMDC 6.1
Well, did a successful reflash from E650 to S710. Played with it a bit on my work machine thats Vista'ed. Now, i bring it home, plug it into XP machine and nothing...nada. ActiveSync 4.5 is installed (like 5 times over...). What gives ? Device is shown as connected in device manager.
*SORTED*
Disabled "advenced networking" thingamy in settings>connections>USB2PC and it started to sync as it was supposed to.
Before that tried to mess with firewalls, netlimiter, but that was not the problem apparently...
Dear All,
I am now reading over the forums for about three days. But still I dont have a solution for my sync problem. The problem is that after I flashed my kaiser it won't connect to activesync. But the STRAINGE think is, that when I put it in bootloader the computer does regonize my kaiser, and I can flash another rom on it.
I also got a MDA touch and when I am connecting that one to my computer, everything workes fine. So the problem is not in the computer. What did i already tried:
- turned off the advance USB settings on the kaiser
- reinstalled my whole WINXP and try to connect
- reflash in VISTA and WINXP
- Put the original ROM back
- check if the repplog is in the Windows file
- Put the firewall off
- Googled on every thinkeble words
So i think that the problem is in te phone, because my touch is normaly connecting. The only thing my kaiser is doing now is when i put in on the computer is recharing.
Does sombody have the knowlegde of getting my kaiser back to sync? It will let me sleep a lot better!
Regards,
Gertjan
Hi Guys,
Any help would be appreciated please. I am currently running Windows Vista. My mobile device is a samsung omnia. I have been synchronizing my phone successfully for the past few months. However, last week, when i tried to connect with the cable (as always), I get the error "To synchronize this device, you must install ActiveSync 4.5 or newer on your desktop computer"
4.5 as i know, is an XP programme so im stuck... I have tried disabling my firewall and this does not seem to help either. I have searched the net and have still not been able to find a solution.
I would appreciate any suggestions!
Thanks
Any ideas please
WMDC
I had the same problem with Windows7. I had to end the partnership with my phone(Sprint Touch Pro), disconnected the usb cable and rebooted the pc. After windows fully loaded I hooked the phone back to the usb and wmdc found my phone, loaded the drivers etc.,and hasn't had a problem since. Hope it works for ya.
I tried this to no avail.
I also uninstalled all drivers in Device manager. I then rebooted and plugged my phone in with "advance..." blocked checked. and my WMDC started up and found my phone. However, for some reason, I can no longer connect to my 3g card when i have this option checked. Then i uncheck the option and plug the phone back in and I get the same error message, and WMDC wont even detect my device.
Ive trolled the web and cannot find any solutions..
Any assistance please!!!