Database Info

ROM 1.06.116WWE

this afternoon i found an update on the swedish qtek site.
http://www.qtek.se/default.asp?nc=4484&id=127&element=0
wonder if it could be used by english speaking users? it says WWE, so i guess it is in english?
i'm uploading the unpacked installation folder to FTP now. maybe someone who knows his thing, could magic a .bat file with the correct checksum to change the carrier and language? [pinoo? ;-)]
the file is called: MA_Qtek(BrPt)_10600_116_10500_SHIP.zip

Hi there..
I will take a look... But my device is with PocketPcTechs at the moment... Getting 128MB RAM ... WOOOOOOOOOOOT
:lol:
Cheers

has anybody yet found out what the passwords for the rom files are?
btw, have the last ones (the imate rom for example) been cracked or did anyone blurt out the right keys?
cu

A bad traduction :
Click on the links below in order to update your Qtek S100. Follows installationsguiden careful in order to few a correct updating.
ROM 1.06.116WWE
(updating from ROM 1.03.148WWE to ROM 1.06.116WWE)
The updating is only for Swedish sold Qtek S100 with software version 1.03.148WWE. In order to check which version you have pressures Start>Settings>System>Device information, you find the information on ExtROM version. If you try to update with another version of software can the to damage your Qtek S100.
The updating ROM 1.06.116WWE contains:
GSM-radio software
MMS client (2.0.0.20)
Caller IDS
Phone PAD Swedish T9
Updated Blåtandsmjukvara
Installationsguide ROM 1.06.116

actually it was pretty clear that qtek only offers their support to their respective customers. Nevertheless it should be quite possible to gain advantages out of an alien fw ;-)

...so it could not be used for I-mate JAM and other models.... :roll: If someone has updated the firmware pls report the "improvements"...
Regards,
Primoz

Yes and please send us (or push it on the FTP) the content of ExtROM.
Thanks !

taron said:
Yes and please send us (or push it on the FTP) the content of ExtROM.
Thanks !
Click to expand...
Click to collapse
That would be very nice!
Regards,
Primoz

Anyone upgraded yet?
Hi, has anybody yet tried out the new QTEK ROM 1.06? If so, could you be so kind to make a ROM image and put it onto the ftp? Guess that'll be way easier than finding out some passwords to change the update-files?
thank you!

Why couldnt this be installed on non-swedish qtek s100?
Seems like an normal english rom-update
Wonder what it is with the bluetooth.
Cause the stack that is installed now is way to slow.

We need the passwords so xda3nbftool can be used to change operator id. Then we get past the Country id error...
So if anybody know the passwords that would be nice...

it cant be used out-of-the-box because the upgrade tools checks for your device-id, the carrier-id (which must be the one of qtek), the language (which, as you've said would fit) and the rom versions.
Thus, at least the carrier id would be different which is enough for the upgrade prog to abort. So there are 2 work-arounds:
1.) using xda3nbf-tool which requires the rom-passwords to decode the rom, change the parameters which are checked and re-encode the rom. Unfortunately anybody knows the passwords yet
2.) do a rom backup of a succesfully upgraded qtek-device with the bootloader-method which gives you *one* file that contains all the radio, the ext-rom and the os rom. This file needs to be modified by a hex-editor (which actually means to replace the first 412 bytes from the qtek-backup with the first byte of your own backup) --> restore the edited file et voilà: it should work. Unfortunatly anybody has posted such a backup yet...
conclusion:
way 2) is easier (at least we dont need any passkeys) nevertheless we still need that backup...
regards,
André

sorry, my upload was broken... should be ok now. the file is called MA_Qtek(BrPt)_10600_116_10500_SHIP.zip and you can find it in the Magician folder on the xda-ftp. it's basically just the unpacked installer.
could anybody tell me how to write a proper .bat file, like the one pinoo did for the i-mate rom? i suppose i need to change the 0x20040522... numbers to stop the installer giving the "invalid checksum" error?
...and reading the last post these numbers seems to be the passwords Guest was talking about...
any chance of getting them?

Be careful with this ROM. I tried to install it and now my Compact is dead . I can't reflash it anymore even from SD card. Tried everything and now it is in service-center. They are triing to fix it but still with no success ((

BTW you can install Radio ROM without any passwords and xda3nbf. Just remove all other .nbf files from directory and run update - and everything is OK without any mistakes. Problems appears after other upgrades (nb and mk_).

landau said:
BTW you can install Radio ROM without any passwords and xda3nbf. Just remove all other .nbf files from directory and run update - and everything is OK without any mistakes. Problems appears after other upgrades (nb and mk_).
Click to expand...
Click to collapse
Just upgraded my Imate Jam radio stack to this one and seems that it improved phone sound quality a lot or am I just hoping so ?!
However no problems with upgrading the radio stack only!

Hello,
landau said:
Be careful with this ROM. I tried to install it and now my Compact is dead . I can't reflash it anymore even from SD card. Tried everything and now it is in service-center. They are triing to fix it but still with no success ((
Click to expand...
Click to collapse
Hope you can solve your Magician problem. Which file did you use to upgrade your PPC: MA_Qtek(BrPt)_10600_116_10500_SHIP.exe or MA_DANG_WWE_10600_115_10500_SHIP.exe.
Thanks

macrinus said:
Hope you can solve your Magician problem. Which file did you use to upgrade your PPC: MA_Qtek(BrPt)_10600_116_10500_SHIP.exe or MA_DANG_WWE_10600_115_10500_SHIP.exe.
Thanks
Click to expand...
Click to collapse
MA_Qtek(BrPt)_10600_116_10500_SHIP.exe

[REF]Wiki entry: HOWTO - Backup your Elf or Elfin ROM - dump and restore

Edit:
moved the HOWTO to the Wiki:
http://wiki.xda-developers.com/index.php?pagename=Elf_HowtoDumpRom
feel free to update/correct the Wiki if you find failures, bugs or updates
It worked for me - but I cannot guarantee that you don't brick your Touch.
So be warned.
Thanks to dsixda for updating the Wiki for Elfin
MOD EDIT: See this post in case the Wiki is not working:
http://forum.xda-developers.com/showpost.php?p=7662245&postcount=214

Will ruu_signed.nbh be suitable for traditional chinese?

Works perfect for me, now a way to rebuild my os with les software

With this method can someone build a french custumized ROM like the 62MB+ and 4MB PagePool one ?? It will be awesome !! Nice work r0p3!! It's workiiiiiiiiiiiiing !!

Works fine for me, thanks for the good guide
Greetings Denis

Now ... How to modify it ??
P.S : Can I include the extRom when i build the ROM with the OS?

I got my work cut out this week.
I'll try this big Up
(it's a bit more clearer then wiki info, maybe you can update it)

Noonski said:
I got my work cut out this week.
I'll try this big Up
(it's a bit more clearer then wiki info, maybe you can update it)
Click to expand...
Click to collapse
Wiki updated:
http://wiki.xda-developers.com/index.php?pagename=Elf_HowtoDumpRom

r0p3 said:
Wiki updated:
http://wiki.xda-developers.com/index.php?pagename=Elf_HowtoDumpRom
Click to expand...
Click to collapse
Can I dump my touch with all installed programs, cooking a complete rom including installed programs?

No - that's not possible I Think.
But you can use sprite backup.
It worked perfectly for me when I flashed the ROM back.
But keep in mind that it only will work correctly on the same language of the ROMs.

r0p3 said:
No - that's not possible I Think.
But you can use sprite backup.
It worked perfectly for me when I flashed the ROM back.
But keep in mind that it only will work correctly on the same language of the ROMs.
Click to expand...
Click to collapse
I have Sprite Backup, but after flashing the device with the same rom, the restore didn't work, so I had to install the programs again.

eefurt said:
I have Sprite Backup, but after flashing the device with the same rom, the restore didn't work, so I had to install the programs again.
Click to expand...
Click to collapse
Here is a trick I have used for quite some times with Sprite Backup 5.1
Sprite Backup version 5.1, version 6.02 is more fancy, 5.1 is good enough.
1. Do a full backup, make sure option Create Self Extract Exec
2. Hard reset (optional)
3. Flash new ROM
4. Run the backup file, make sure the Upgrade Mode Restore Option is Check.
5. Kneel down and pray (optional, or take a cup of coffee).
SKtools is handy.
Step 4 is most important. When it asks you for the upgrade fine, Click None. Minor cleanup unavoidable but heck a lot better than of re-install all the softwares.
Sometimes you may find the machine run slugglish by doing that. I am not sure why.
You may flash the new ROM, re-install all the softwares, see if the machine run faster, but few days later, you will feel it run slugglish. I am not sure why. (The laptop runs runs much faster than once I bought it and take it home and installed with applications.)
So I just keep buying new machines... hahaha

holy moly.
going great at 10% of flashing.
but i feel confident the tute was on the spot.
muchos gracias.
And yes you are right (you didn't say it but you must have thought it), I could have added it myself to WIKI. But just had to try it myself first off course.
And am i right in believing i could have allready replaced some of the graphical files in the dumped "ROM" directory?
Or is it to dangerous at this change because the file size needs to fit?
92%
100%,... first boot screen passed........second boot screen passed....
The audience is in Awe. It works.
Next step, getting familiar with hypercore kitchen.

Thanks for this tutorial.
Now i can safely backup my Dutch rom and test some custom ****..
Regards,
Schmia

And am i right in believing i could have allready replaced some of the graphical files in the dumped "ROM" directory?
Or is it to dangerous at this change because the file size needs to fit?
Click to expand...
Click to collapse
Do NOT change files in the dump directory without proper tools!!!
You will mess up the ROM
When you have a look at the dump directory there are some info files with data for the places in the ROM which need to be recalculated.
Noonski said:
holy moly.
going great at 10% of flashing.
but i feel confident the tute was on the spot.
muchos gracias.
And yes you are right (you didn't say it but you must have thought it), I could have added it myself to WIKI. But just had to try it myself first off course.
92%
100%,... first boot screen passed........second boot screen passed....
The audience is in Awe. It works.
Next step, getting familiar with hypercore kitchen.
Click to expand...
Click to collapse
Thanks! I'm happy that it worked - nice feeling - eh?

Dumping Elf WM6 Italian version ROM
Before trying to put new Rom images, i would like to backup the original one.
I followed the (simply) tutorial, but i'm confused about this step:
"need the ruu_signed.nbh from valid update (extract with winrar)"
Which file do I need?
I don't understand why I need a valid ROM when I'm trying to dump a Rom from my Elf
Can I use an other language ROM version (English, Dutch....) or is needed only an Italian one?
Thx in adv and sorry for my poor english
Ciauz

junkyarddog said:
Before trying to put new Rom images, i would like to backup the original one.
I followed the (simply) tutorial, but i'm confused about this step:
"need the ruu_signed.nbh from valid update (extract with winrar)"
Which file do I need?
I don't understand why I need a valid ROM when I'm trying to dump a Rom from my Elf
Can I use an other language ROM version (English, Dutch....) or is needed only an Italian one?
Thx in adv and sorry for my poor english
Ciauz
Click to expand...
Click to collapse
you need this as a "shell" or "template" because the .nbh files are made in a way that cannot be recontructed (so far I understand - correct me if I'm wrong).
And yes you can use an ROM with another language. I took the Australian ROM - look at the first paragraph "files you need"
This is usually a .exe file that you can extract with winrar (or winzip maybe)
P.S.: your english is not so bad

r0p3 said:
you need this as a "shell" or "template" because the .nbh files are made in a way that cannot be recontructed (so far I understand - correct me if I'm wrong).
And yes you can use an ROM with another language. I took the Australian ROM - look at the first paragraph "files you need"
Click to expand...
Click to collapse
Thx very much!!!
All worked fine, flashing the "new" dumped rom worked perfectly, I'll put it on FTP to make it avaiable to other users.
Ciao

r0p3 said:
Do NOT change files in the dump directory without proper tools!!!
You will mess up the ROM
When you have a look at the dump directory there are some info files with data for the places in the ROM which need to be recalculated.
Thanks! I'm happy that it worked - nice feeling - eh?
Click to expand...
Click to collapse
Pfew thanks, nice knowing this. Iwas allready worried that it would need correct file info.
junkyarddog said:
Thx very much!!!
All worked fine, flashing the "new" dumped rom worked perfectly, I'll put it on FTP to make it avaiable to other users.
Ciao
Click to expand...
Click to collapse
Don't upload to XDA. I've seen some directories with full roms on FTP. But this is no longer allowed and files will be deleted.
XDA's allready been in trouble with MS about this. So either use third party file sharing or privatly owned FTP.
r0p3..
So to get the radio and SPL do i need to redo first extraction but then for these files? Or are these IPL/SPL?
| 3.06M (0x30fc00) Part00
| 3.06M (0x310000) Part01

Noonski said:
r0p3..
So to get the radio and SPL do i need to redo first extraction but then for these files? Or are these IPL/SPL?
| 3.06M (0x30fc00) Part00
| 3.06M (0x310000) Part01
Click to expand...
Click to collapse
I don't know yet - I still have to dig in the wiki about that.
It's very dangerous in this area - if you mess up IPL or SPL your baby is usually lost forever. I don't mind about those as long pof's USPL works beautiful.
Radio might be not so critical. But 2.97. is already available - so it would only be for the fun of it

HTC Kaiser SSPL v1 (or flashing any rom 4 free)

* THIS WILL WORK ON KAISER ONLY - FOR GENERIC METHOD SEE JumpSPL *
This tool allow to flash any Kaiser ROM bypassing CID and signature check.
You'll be able to change the ROM language, flash cooked roms, custom splash screens, etc...
FEATURES
Code:
1. SuperCID / Security Level=0
2. Does not check NBH signatures
3. Based on 0.92 Shipped SPL
4. Accept any Model ID
5. Disabled initial SD card loading to prevent hang
INSTRUCTIONS
Transfer SSPL-KAIS.exe to your Kaiser
Connect the USB cable and run SSPL-KAIS.exe (on kaiser, not on PC!)
Click "Continue", the Bootloader tri-color screen should appear
Check SPL version number: if it ends in ".JumpSPL" then everything is fine.
Unplug the USB cable and re-plug it
Device is ready to flash any ROM, you don't need ActiveSync at all.
DISCLAIMER
This software is free to use but at your own risk, I take no responsiblity for any conflict, fault, or damage caused by this unlocking procedure. No warranties of any kind are given.
DONATIONS
Your donations are a strong incentive to continue research on new devices, if you find JumpSPL useful please cosider making a PayPal donation. Any donation amount is greatly appreciated ​​
Enjoy!
--------------------
UPDATE: Found a problem on SSPL where it will hang when flashing a full ROM with a new RUU due to the NBH buffer being smaller in SPL-0.92, I removed the link and will update Kaiser SSPL version when I have some free time. At the moment, please use Kaiser Hard-SPL, this is safe
For those of you had the phone stuck in bootloader mode after flash with SSPL stopping at 16%, follow these instructions to unbrick your phone:
1. Download mtty.exe
2. Disable activesync (connection settings -> uncheck "allow usb connections")
3. Connect your Kaiser to PC using USB cable.
4. Open mtty, select USB port and click OK.
5. Hit ENTER twice, you should see the "Cmd>" prompt.
6. Type the command "boot", you should see something like this:
Code:
Cmd> [B]boot[/B]
InitDisplay: Display_Chip=1
No card inserted
OSSIReadBack ++
Read SI data from flash success
tail signature match
Checksum match
UserStorageSIPreload ++
After that device should boot WM6 again, you can now re-enable USB connections in activesync and flash HardSPL

[- reserved -]

OMG thank you POF!!! You are truly the MASTER!!
Question how do we go about dumping and using Imgfs tools in Kaiser ROMS?
Can you give us a basic run down since its different than the Hermes please

Okay, excuse my ignorance, but when you say Kaiser, do you mean all versions of the Kaiser, like the ATT Tilt (8925), or just the HTC Kaiser? Please don't beat me up

austinsnyc said:
Question how do we go about dumping and using Imgfs tools in Kaiser ROMS?
Click to expand...
Click to collapse
See here how to dump the ROM: http://forum.xda-developers.com/showthread.php?t=334680
I've not researched yet on how to use ImgfsTools, reconstruct dumped roms, etc... but should not be very different from what you already know from hermes, just be creative
kman79 said:
when you say Kaiser, do you mean all versions of the Kaiser, like the ATT Tilt (8925), or just the HTC Kaiser?
Click to expand...
Click to collapse
All versions

now the race is on for who comes out with the first ultra lite, mega storage space slim downed rom, who will it be.......

pof! you are tha MAN!
Thanks!
Donation to follow...
-Syrius

pof said:
* THIS WILL WORK ON KAISER ONLY - FOR GENERIC METHOD SEE JumpSPL *
3. Based on 0.92 Shipped SPL
Click to expand...
Click to collapse
was this from me??
- Syrius

Syrius_B said:
was this from me??
Click to expand...
Click to collapse
Yes Thanks mate!

pof said:
Yes Thanks mate!
Click to expand...
Click to collapse
anytime
- Syrius

HI Pof,
Does this also SIM unlock the device?
Or if I use this CID unlock and load the HTC rom will that SIM unlock the device?
Thanks

OMG, wonderfull.... now only need some research on how to repack dumped /modified ROMs... any aproach?
THANKS Pof you are incredible...

botap said:
HI Pof,
Does this also SIM unlock the device?
Or if I use this CID unlock and load the HTC rom will that SIM unlock the device?
Thanks
Click to expand...
Click to collapse
Only CIDUnlock.... SIM Unlok is not ready...

pof said:
See here how to dump the ROM: http://forum.xda-developers.com/showthread.php?t=334680
I've not researched yet on how to use ImgfsTools, reconstruct dumped roms, etc... but should not be very different from what you already know from hermes, just be creative
All versions
Click to expand...
Click to collapse
HI POF Ihave tried the above method using pdocread but keep getting an error , not sure if its because im using windows vista ultimate.

duttythroy said:
HI POF Ihave tried the above method using pdocread but keep getting an error , not sure if its because im using windows vista ultimate.
Click to expand...
Click to collapse
I manage to dump mine without problems using Vista Ultimate too ... if you get this error when executing pdocread
Code:
[I]
C:\itsutils>pdocread.exe -l
Copying C:\itsutils\itsutils.dll to WCE:\windows\itsutils.dll
Could not update itsutils.dll to the current version, maybe it is inuse?
try restarting your device, or restart ActiveSync [/I]
You have to modify this registry key, and then softreset using power button:
[B]HKLM\Security\Policies\Policies
[/B] valuename '[B]00001001[/B]' was set to dword:2, change it to dword:1
dword: any thing other than 1 disallows unsigned
dword: 1 allows unsigned
(extracted from Hermes wiki and tested on Kaiser)

jcespi2005 said:
I manage to dump mine without problems using Vista Ultimate too ... if you get this error when executing pdocread
Code:
C:\itsutils>pdocread.exe -l
Copying C:\itsutils\itsutils.dll to WCE:\windows\itsutils.dll
Could not update itsutils.dll to the current version, maybe it is inuse?
try restarting your device, or restart ActiveSync You have to modify this registry key, and then softreset using power button:
HKLM\Security\Policies\Policies
valuename '00001001' was set to dword:2, change it to dword:1
dword: any thing other than 1 disallows unsigned
dword: 1 allows unsigned
(extracted from Hermes wiki and tested on Kaiser)
Click to expand...
Click to collapse
just fount it on the wiki, thanks

help
@jcespi2005 just tired it change policies to dword 1 tried the same command but now getting this error.
c:\itsutils\pdocread.exe is not a valid Win32 application
what to do

duttythroy said:
@jcespi2005 just tired it change policies to dword 1 tried the same command but now getting this error.
c:\itsutils\pdocread.exe is not a valid Win32 application
what to do
Click to expand...
Click to collapse
Works fine for me... Try to download latest version of pdcoread here...
http://www.xs4all.nl/~itsme/projects/xda/tools.html

Big problem
Hi all I have a big problem I have try to flash my kaiser from SRF and using kaiser_JumpSPL_pof_v1. at 16% my the copy hanged and the Rom wizzard told me to remove the kaiser battery.
and after that I lost my old rom and I have the SPL from the factory ! and I dont have any copy from my old Rom.
and My phone is locked...
so How I can do to copy and execute the kaiser_JumpSPL_pof_v1 to my devis to try to flush the kaiser again
thx for you help
Titosa

Instructions to unbrick posted in the first post.
I'm closing this thread until I have time to post an updated and hopefully working version...

How to get a Kaiser to display Chinese ?

Hi everyone, I just got my first smartphone, an AT&T Tilt (HTC 8925) a couple of days ago. I'm happy with it except that I wish it to display Chinese when browsing webpages. I don't need the interface to be Chinese, nor do I need to input Chinese. I just wish when I visit a Chinese website, I'm not seeing blocks.
Don't know if this makes a difference, but either traditional or simplified Chinese would work (I read both).
Searching the whole forum didn't give me much. Probably people had some discussions before, just I didn't find them yet.
I'm totally new on smartphones. Any help is very much appreciated.
info on the phone:
ROM version: 3.57.502.2 WWE (since shipped I didn't flash the ROM)
ROM date: 07/17/08
Radio version: 1.65.21.18
Protocol version: 25.88.40.05H
I just flashed the SPL to Kaiser-HardSPL-3.56 following instructions. BTW, which version should I use, 3.56 or 3.29/28?
I did not flash the ROM, b/c I'd like to find out more on Chinese language support.

Install this cab and it will perfectly display Chinese. It is suitable for almost any WM5,6,6.1 rom :http://www.51spsoft.com/DownInfoEn/info26059.html
Or direct download link: http://www.51spsoft.com/Download.asp?ID=26760

Miraco said:
Install this cab and it will perfectly display Chinese. It is suitable for almost any WM5,6,6.1 rom :http://www.51spsoft.com/DownInfoEn/info26059.html
Or direct download link: http://www.51spsoft.com/Download.asp?ID=26760
Click to expand...
Click to collapse
Be sure to backup your device before you try. I am not responsible for any data lost. Your might need a hard reset if it failed... But it is the cab that I have been using for English roms for many devices and it will likely work for you too

you shoud find a chinese font file'ttf',and repair reg
try this websit
www.ioicn.com.cn

well.. this is what i use only...
http://www.studiokuma.com/wm/?section=support

1. CE Star chinese
2. Monster chinese
3. Many font + wince.nls + registry mentioned above.
4. My rom (see signature below)

Thank you very much.
I'm now downloading and trying the ways you pointed out.

Miraco said:
Install this cab and it will perfectly display Chinese. It is suitable for almost any WM5,6,6.1 rom :http://www.51spsoft.com/DownInfoEn/info26059.html
Or direct download link: http://www.51spsoft.com/Download.asp?ID=26760
Click to expand...
Click to collapse
Thank you for the suggestion. I just installed it on my official ATT ROM (WM 6.1). It showed installation successfull. It also said it may not display properly b/c it's designed for a previous version of Windows Mobile.
Anyway, then I visited mitbbs.com and www.sina.com.cn as a test (using Internet Explorer). Both did not show Chinese. I also tried changing encoding to Unicode UTF-8 and it didn't work either. under system settings, I looked at regional settings and didn't find anything Chinese.
Is there any configuration that needs to be done? Do you happen to know what ROM floating in this forum for WM6.1 can indeed incorporate this O2 Chinese support?
Thanks again

ctrc said:
Thank you for the suggestion. I just installed it on my official ATT ROM (WM 6.1). It showed installation successfull. It also said it may not display properly b/c it's designed for a previous version of Windows Mobile.
Anyway, then I visited mitbbs.com and www.sina.com.cn as a test (using Internet Explorer). Both did not show Chinese. I also tried changing encoding to Unicode UTF-8 and it didn't work either. under system settings, I looked at regional settings and didn't find anything Chinese.
Is there any configuration that needs to be done? Do you happen to know what ROM floating in this forum for WM6.1 can indeed incorporate this O2 Chinese support?
Thanks again
Click to expand...
Click to collapse
For regional setting, check the size of your wince.nls make sure it's > 1mb in size (typical English only is only 300 - 400k in size). But if you already planning to change yr rom, I highly recommand your try my rom. It's pre-configure for Tradition Chinese (HK, mostly), but will work on simplified chinese as well.

jackleung said:
For regional setting, check the size of your wince.nls make sure it's > 1mb in size (typical English only is only 300 - 400k in size). But if you already planning to change yr rom, I highly recommand your try my rom. It's pre-configure for Tradition Chinese (HK, mostly), but will work on simplified chinese as well.
Click to expand...
Click to collapse
I'm downloading your ROM, will try. Thanks for all the work!
just curious, where can I find wince.nls? I can't find any search function for the File Explorer on Tilt.

This is what I use to read Chinese website
http://forum.xda-developers.com/attachment.php?attachmentid=37342&d=1176792242
This is what I use to type Chinese
http://www.a4user.com/\A4_down_sip.asp
It doesnt support chinese hand writing input though. If you know of an SIP that supports hand writing input please post here

ctrc said:
I'm downloading your ROM, will try. Thanks for all the work!
just curious, where can I find wince.nls? I can't find any search function for the File Explorer on Tilt.
Click to expand...
Click to collapse
It's hidden file under \Windows. Therefore, must use "show all file" in order to display it.
cproaudio, all listed below support Chinese writing
http://www.studiokuma.com/wm/?section=support
CE star
Monster

I tried installing CE-Star 2.8 Chinese support on the shipped ROM and it worked.
I then flashed the ROM to Jack's cooked ROM and it works great now. Thank you, Jack.
Thank everyone. This forum is great.

Instructions to migrate ATT WM6.1 to Jack 2.6 confirmation
Dear All:
I just got the same phone as" CTRC above" but to ensure that I dont make any mistake on updating ROM using Jack's V2.6 from ATT Tilt WM6.1:
ROM version: 3.57.502.2 WWE (since shipped I didn't flash the ROM)
ROM date: 07/17/08
Radio version: 1.65.21.18
Protocol version: 25.88.40.05H
I read all of the above . However, to ensure that I dont run into wall,
Can someone post the step by step instructions including any potential "landmine" on how to migrate from the
ATT ROM above to Jack 2.6 ROM including the instructions if I need to install
those pre-requisites (Soft and Hard SPL ?)and proper Radio ?
Many Thx

mmtea said:
Dear All:
I just got the same phone as" CTRC above" but to ensure that I dont make any mistake on updating ROM using Jack's V2.6 from ATT Tilt WM6.1:
ROM version: 3.57.502.2 WWE (since shipped I didn't flash the ROM)
ROM date: 07/17/08
Radio version: 1.65.21.18
Protocol version: 25.88.40.05H
I read all of the above . However, to ensure that I dont run into wall,
Can someone post the step by step instructions including any potential "landmine" on how to migrate from the
ATT ROM above to Jack 2.6 ROM including the instructions if I need to install
those pre-requisites (Soft and Hard SPL ?)and proper Radio ?
Many Thx
Click to expand...
Click to collapse
Wiki is your good friend here: http://wiki.xda-developers.com/index.php?pagename=KaiserIntroductionToROM_Flashing

Hi Jack:
I had already unlock the ATT tilt using unlock code ...Do I still need to run step one below?
1. CID-unlock your device by following the instructions at pof's HTC Kaiser Hard-SPL v1 - CID Unlock & Flash any ROM to your device (4 free)-thread
BTW, I did get the "white screen" on this phone ... and follow the instructions to :
- 1a. download the 5 attached files
1b. pull out the battery, REMOVE SIM and SD CARDS !! and reinsert battery (this step *is* important)
1c. connect your PC to phone with a USB cable
2. copy JumpSPL1.56-KAIS.exe to your device and run it (make sure the USB cable is still connected). If you still get a white screen then reset your device and now try JumpSPL1.93-KAIS.exe ...
The step (2) above , copy the JumpSPL1.56-KAIS.exe to the device ...Pls advise which folder and how to run it after taking the SIM OUT ?
Thx

White Screen Issue
Hi Jack:
JumpSPL1.56-KAIS.exe to your device and run it (make sure the USB cable is still connected). If you still get a white screen then reset your device and now try JumpSPL1.93-KAIS.exe ...
Are these JumpSPL1.56 or JumpSPL1.93 run from PC or the terminal device itself ? How do I run these two ".exe" files in the device ?
Why am I getting White Screen and others devices dont get white screen ?
Thx

mmtea said:
The step (2) above , copy the JumpSPL1.56-KAIS.exe to the device ...Pls advise which folder and how to run it after taking the SIM OUT ?
Click to expand...
Click to collapse
Anywhere. I would copy it to the top level (\). Even if you took your sim out, you can close the phone page (which complaints about sim) by tapping the top right corner or the hardware red button (hang up). Then use "File Explorer", locate the exe files that you copied and click on it.

Hi Jack,
I am new to the Tilt. How do I get to "File Explorer" ? I dont see it on the menu when I open either the "setting" or "programs" ?
BTW, when I run the JumpSPL1.56-KAIS.exe, do I also need to run the Kaiser Hard-SPL v1 again ? what's the right sequence ?
Thx

RESET
Hi Jack:
Is the rest pwer+camera+ "navigation" at the same time to get Tri-colour ?
if NOT, which three at the same time can "reset" ?
Thx

[ROM] Official HTC Upgrade - Windows Mobile 6.5

HTC Snap:
ROM: 2.03.405.2
Radio: 3.47.25.29
Windows Mobile Standard (Build 5.2.21854)
http://rapidshare.com/files/2919947...igned_MAPLE_61.36t.25.29H_3.47.25.29_Ship.exe
Have fun!
For those stuck in Tricolour boot loader:
Original post: http://forum.xda-developers.com/showpost.php?p=4872255&postcount=78
Solution is as folllows
1. Downloaded rom from above (or other source if dont have a serial number to DL from HTC - although the serial number is a good check for the correct rom)
2. Run RUU_Captain_S_HTC_WWE_2.03.405.2_Radio_Signed_MAPL E_61.36t.25.29H_3.47.25.29_Ship.exe
3. Select Next so that package extracts
4. Select Start | Run | and type %TEMP%, and hit enter to open temp folder
5. Sort explorer by Date so that newest date at top
6. Locate the newest folder (eg just created), should be something like pftXXXX.tmp
7. Double click to open
8. Rename RUU_signed.NBH to MAPLIMG.nbh
9. Copy to a FAT32 microsd
10. Insert SD into handset and power on (remove battery an reinsert if required).
11. Screen will initially display tri-colour, then change to grey screen with loading
12. Screen will then show progress as initial components flashed
13. Phone will reboot at about 10% - DONT PANIC - Let phone boot to Tri-Colour, then into grey screen
14. Leave for a few minutes, loader will confirm initial components flashed ok, then continue to flash OS image
15. Once complete (progress bar reaches 100% and displays complete (or something similar)
16. Remove battery
17. Remove MicroSD
18. Reinstall battery, and power on phone
19. WM6.5 initial setup will begin, and phone should be all happy now!!
20. Ensure you rename or delete MAPLIMG.nbh from SD before reinstalling into phone.
21. Flash HardSPL!!!!!
22. Flash custom rom of your choice (ookba's look pretty good to me!!!).

Will this work on any European Snap? Downloading it now...

would this work with my x1

bad file
tried several times to use this..stops at 21% each time. downloaded a couple times thinking it might have been a bad file..in any case. doesn't work. fortunatley was able to flash stock image after

Whether it can provide the parameters of ROM production orders and related software.
Intentionally ask. Thanks.

I know it says "Maple", but does it work on the Ozone (Cedar)?

jonwold said:
tried several times to use this..stops at 21% each time. downloaded a couple times thinking it might have been a bad file..in any case. doesn't work. fortunatley was able to flash stock image after
Click to expand...
Click to collapse
sorry I don't undestand. you download the ROM and it doesn't work?

Is this the official HTC Snap ROM upgrade for certain? No Hard-SPL needed?
And which country is this for?

Same here on a MAPL100. 23% and freezes.

netnut said:
Same here on a MAPL100. 23% and freezes.
Click to expand...
Click to collapse
doesn't work?

The flash does not work on MY MAPL100. The flash freezes and then walks you through recovery, which fails.
I was able to flash back to the 1.17.531.6.

Genna77 said:
doesn't work?
Click to expand...
Click to collapse
23% != 100%
Therefore <FLASH> Failed

well, after reading through the thread I feel it's necessary to give a big
FACE = PALM
to all contributers

obededom said:
well, after reading through the thread I feel it's necessary to give a big
FACE = PALM
to all contributers
Click to expand...
Click to collapse
explain face - palm

Looks like it's designed for a European SNAP S521 (MAPL110). If the ROM doesn't see that CID, it will fail. To install it on a different Maple device, you need HardSPL or a Goldcard from QMAT.

wm 6.5
can someone post this another way i could download it instead of rapidshare my computer wont let me download from rapidshare
udK said:
HTC Snap:
ROM: 2.03.405.2
Radio: 3.47.25.29
Windows Mobile Standard (Build 5.2.21854)
http://rapidshare.com/files/2919947...igned_MAPLE_61.36t.25.29H_3.47.25.29_Ship.exe
Have fun!
Click to expand...
Click to collapse

ikando2on2 said:
can someone post this another way i could download it instead of rapidshare my computer wont let me download from rapidshare
Click to expand...
Click to collapse
No becuase it does not work. WHo uploaded this and why does it not work? Mine is CID unlocked, app unlocked, etc.
Failed at 23%

ookba said:
Looks like it's designed for a European SNAP S521 (MAPL110). If the ROM doesn't see that CID, it will fail. To install it on a different Maple device, you need HardSPL or a Goldcard from QMAT.
Click to expand...
Click to collapse
I buy my device in an european country and it's not branded that means I can use the ROM uploaded here?
thx

jonwold said:
explain face - palm
Click to expand...
Click to collapse
the specifics of where, what and why all the errors were a bit frustrating
but, alas...some clarity
ookba said:
Looks like it's designed for a European SNAP S521 (MAPL110). If the ROM doesn't see that CID, it will fail. To install it on a different Maple device, you need HardSPL or a Goldcard from QMAT.
Click to expand...
Click to collapse

obededom said:
the specifics of where, what and why all the errors were a bit frustrating
but, alas...some clarity
Click to expand...
Click to collapse
More than that, it looks like it's still not an official release. Hence, why we don't see it on HTC's website yet. I managed to cook from it and testing now. Core feels snappy and solid so far. Flashed the new radio and will be testing reception as well.