Edit:
moved the HOWTO to the Wiki:
http://wiki.xda-developers.com/index.php?pagename=Elf_HowtoDumpRom
feel free to update/correct the Wiki if you find failures, bugs or updates
It worked for me - but I cannot guarantee that you don't brick your Touch.
So be warned.
Thanks to dsixda for updating the Wiki for Elfin
MOD EDIT: See this post in case the Wiki is not working:
http://forum.xda-developers.com/showpost.php?p=7662245&postcount=214
Will ruu_signed.nbh be suitable for traditional chinese?
Works perfect for me, now a way to rebuild my os with les software
With this method can someone build a french custumized ROM like the 62MB+ and 4MB PagePool one ?? It will be awesome !! Nice work r0p3!! It's workiiiiiiiiiiiiing !!
Works fine for me, thanks for the good guide
Greetings Denis
Now ... How to modify it ??
P.S : Can I include the extRom when i build the ROM with the OS?
I got my work cut out this week.
I'll try this big Up
(it's a bit more clearer then wiki info, maybe you can update it)
Noonski said:
I got my work cut out this week.
I'll try this big Up
(it's a bit more clearer then wiki info, maybe you can update it)
Click to expand...
Click to collapse
Wiki updated:
http://wiki.xda-developers.com/index.php?pagename=Elf_HowtoDumpRom
r0p3 said:
Wiki updated:
http://wiki.xda-developers.com/index.php?pagename=Elf_HowtoDumpRom
Click to expand...
Click to collapse
Can I dump my touch with all installed programs, cooking a complete rom including installed programs?
No - that's not possible I Think.
But you can use sprite backup.
It worked perfectly for me when I flashed the ROM back.
But keep in mind that it only will work correctly on the same language of the ROMs.
r0p3 said:
No - that's not possible I Think.
But you can use sprite backup.
It worked perfectly for me when I flashed the ROM back.
But keep in mind that it only will work correctly on the same language of the ROMs.
Click to expand...
Click to collapse
I have Sprite Backup, but after flashing the device with the same rom, the restore didn't work, so I had to install the programs again.
eefurt said:
I have Sprite Backup, but after flashing the device with the same rom, the restore didn't work, so I had to install the programs again.
Click to expand...
Click to collapse
Here is a trick I have used for quite some times with Sprite Backup 5.1
Sprite Backup version 5.1, version 6.02 is more fancy, 5.1 is good enough.
1. Do a full backup, make sure option Create Self Extract Exec
2. Hard reset (optional)
3. Flash new ROM
4. Run the backup file, make sure the Upgrade Mode Restore Option is Check.
5. Kneel down and pray (optional, or take a cup of coffee).
SKtools is handy.
Step 4 is most important. When it asks you for the upgrade fine, Click None. Minor cleanup unavoidable but heck a lot better than of re-install all the softwares.
Sometimes you may find the machine run slugglish by doing that. I am not sure why.
You may flash the new ROM, re-install all the softwares, see if the machine run faster, but few days later, you will feel it run slugglish. I am not sure why. (The laptop runs runs much faster than once I bought it and take it home and installed with applications.)
So I just keep buying new machines... hahaha
holy moly.
going great at 10% of flashing.
but i feel confident the tute was on the spot.
muchos gracias.
And yes you are right (you didn't say it but you must have thought it), I could have added it myself to WIKI. But just had to try it myself first off course.
And am i right in believing i could have allready replaced some of the graphical files in the dumped "ROM" directory?
Or is it to dangerous at this change because the file size needs to fit?
92%
100%,... first boot screen passed........second boot screen passed....
The audience is in Awe. It works.
Next step, getting familiar with hypercore kitchen.
Thanks for this tutorial.
Now i can safely backup my Dutch rom and test some custom ****..
Regards,
Schmia
And am i right in believing i could have allready replaced some of the graphical files in the dumped "ROM" directory?
Or is it to dangerous at this change because the file size needs to fit?
Click to expand...
Click to collapse
Do NOT change files in the dump directory without proper tools!!!
You will mess up the ROM
When you have a look at the dump directory there are some info files with data for the places in the ROM which need to be recalculated.
Noonski said:
holy moly.
going great at 10% of flashing.
but i feel confident the tute was on the spot.
muchos gracias.
And yes you are right (you didn't say it but you must have thought it), I could have added it myself to WIKI. But just had to try it myself first off course.
92%
100%,... first boot screen passed........second boot screen passed....
The audience is in Awe. It works.
Next step, getting familiar with hypercore kitchen.
Click to expand...
Click to collapse
Thanks! I'm happy that it worked - nice feeling - eh?
Dumping Elf WM6 Italian version ROM
Before trying to put new Rom images, i would like to backup the original one.
I followed the (simply) tutorial, but i'm confused about this step:
"need the ruu_signed.nbh from valid update (extract with winrar)"
Which file do I need?
I don't understand why I need a valid ROM when I'm trying to dump a Rom from my Elf
Can I use an other language ROM version (English, Dutch....) or is needed only an Italian one?
Thx in adv and sorry for my poor english
Ciauz
junkyarddog said:
Before trying to put new Rom images, i would like to backup the original one.
I followed the (simply) tutorial, but i'm confused about this step:
"need the ruu_signed.nbh from valid update (extract with winrar)"
Which file do I need?
I don't understand why I need a valid ROM when I'm trying to dump a Rom from my Elf
Can I use an other language ROM version (English, Dutch....) or is needed only an Italian one?
Thx in adv and sorry for my poor english
Ciauz
Click to expand...
Click to collapse
you need this as a "shell" or "template" because the .nbh files are made in a way that cannot be recontructed (so far I understand - correct me if I'm wrong).
And yes you can use an ROM with another language. I took the Australian ROM - look at the first paragraph "files you need"
This is usually a .exe file that you can extract with winrar (or winzip maybe)
P.S.: your english is not so bad
r0p3 said:
you need this as a "shell" or "template" because the .nbh files are made in a way that cannot be recontructed (so far I understand - correct me if I'm wrong).
And yes you can use an ROM with another language. I took the Australian ROM - look at the first paragraph "files you need"
Click to expand...
Click to collapse
Thx very much!!!
All worked fine, flashing the "new" dumped rom worked perfectly, I'll put it on FTP to make it avaiable to other users.
Ciao
r0p3 said:
Do NOT change files in the dump directory without proper tools!!!
You will mess up the ROM
When you have a look at the dump directory there are some info files with data for the places in the ROM which need to be recalculated.
Thanks! I'm happy that it worked - nice feeling - eh?
Click to expand...
Click to collapse
Pfew thanks, nice knowing this. Iwas allready worried that it would need correct file info.
junkyarddog said:
Thx very much!!!
All worked fine, flashing the "new" dumped rom worked perfectly, I'll put it on FTP to make it avaiable to other users.
Ciao
Click to expand...
Click to collapse
Don't upload to XDA. I've seen some directories with full roms on FTP. But this is no longer allowed and files will be deleted.
XDA's allready been in trouble with MS about this. So either use third party file sharing or privatly owned FTP.
r0p3..
So to get the radio and SPL do i need to redo first extraction but then for these files? Or are these IPL/SPL?
| 3.06M (0x30fc00) Part00
| 3.06M (0x310000) Part01
Noonski said:
r0p3..
So to get the radio and SPL do i need to redo first extraction but then for these files? Or are these IPL/SPL?
| 3.06M (0x30fc00) Part00
| 3.06M (0x310000) Part01
Click to expand...
Click to collapse
I don't know yet - I still have to dig in the wiki about that.
It's very dangerous in this area - if you mess up IPL or SPL your baby is usually lost forever. I don't mind about those as long pof's USPL works beautiful.
Radio might be not so critical. But 2.97. is already available - so it would only be for the fun of it
Related
this afternoon i found an update on the swedish qtek site.
http://www.qtek.se/default.asp?nc=4484&id=127&element=0
wonder if it could be used by english speaking users? it says WWE, so i guess it is in english?
i'm uploading the unpacked installation folder to FTP now. maybe someone who knows his thing, could magic a .bat file with the correct checksum to change the carrier and language? [pinoo? ;-)]
the file is called: MA_Qtek(BrPt)_10600_116_10500_SHIP.zip
Hi there..
I will take a look... But my device is with PocketPcTechs at the moment... Getting 128MB RAM ... WOOOOOOOOOOOT
:lol:
Cheers
has anybody yet found out what the passwords for the rom files are?
btw, have the last ones (the imate rom for example) been cracked or did anyone blurt out the right keys?
cu
A bad traduction :
Click on the links below in order to update your Qtek S100. Follows installationsguiden careful in order to few a correct updating.
ROM 1.06.116WWE
(updating from ROM 1.03.148WWE to ROM 1.06.116WWE)
The updating is only for Swedish sold Qtek S100 with software version 1.03.148WWE. In order to check which version you have pressures Start>Settings>System>Device information, you find the information on ExtROM version. If you try to update with another version of software can the to damage your Qtek S100.
The updating ROM 1.06.116WWE contains:
GSM-radio software
MMS client (2.0.0.20)
Caller IDS
Phone PAD Swedish T9
Updated Blåtandsmjukvara
Installationsguide ROM 1.06.116
actually it was pretty clear that qtek only offers their support to their respective customers. Nevertheless it should be quite possible to gain advantages out of an alien fw ;-)
...so it could not be used for I-mate JAM and other models.... :roll: If someone has updated the firmware pls report the "improvements"...
Regards,
Primoz
Yes and please send us (or push it on the FTP) the content of ExtROM.
Thanks !
taron said:
Yes and please send us (or push it on the FTP) the content of ExtROM.
Thanks !
Click to expand...
Click to collapse
That would be very nice!
Regards,
Primoz
Anyone upgraded yet?
Hi, has anybody yet tried out the new QTEK ROM 1.06? If so, could you be so kind to make a ROM image and put it onto the ftp? Guess that'll be way easier than finding out some passwords to change the update-files?
thank you!
Why couldnt this be installed on non-swedish qtek s100?
Seems like an normal english rom-update
Wonder what it is with the bluetooth.
Cause the stack that is installed now is way to slow.
We need the passwords so xda3nbftool can be used to change operator id. Then we get past the Country id error...
So if anybody know the passwords that would be nice...
it cant be used out-of-the-box because the upgrade tools checks for your device-id, the carrier-id (which must be the one of qtek), the language (which, as you've said would fit) and the rom versions.
Thus, at least the carrier id would be different which is enough for the upgrade prog to abort. So there are 2 work-arounds:
1.) using xda3nbf-tool which requires the rom-passwords to decode the rom, change the parameters which are checked and re-encode the rom. Unfortunately anybody knows the passwords yet
2.) do a rom backup of a succesfully upgraded qtek-device with the bootloader-method which gives you *one* file that contains all the radio, the ext-rom and the os rom. This file needs to be modified by a hex-editor (which actually means to replace the first 412 bytes from the qtek-backup with the first byte of your own backup) --> restore the edited file et voilà: it should work. Unfortunatly anybody has posted such a backup yet...
conclusion:
way 2) is easier (at least we dont need any passkeys) nevertheless we still need that backup...
regards,
André
sorry, my upload was broken... should be ok now. the file is called MA_Qtek(BrPt)_10600_116_10500_SHIP.zip and you can find it in the Magician folder on the xda-ftp. it's basically just the unpacked installer.
could anybody tell me how to write a proper .bat file, like the one pinoo did for the i-mate rom? i suppose i need to change the 0x20040522... numbers to stop the installer giving the "invalid checksum" error?
...and reading the last post these numbers seems to be the passwords Guest was talking about...
any chance of getting them?
Be careful with this ROM. I tried to install it and now my Compact is dead . I can't reflash it anymore even from SD card. Tried everything and now it is in service-center. They are triing to fix it but still with no success ((
BTW you can install Radio ROM without any passwords and xda3nbf. Just remove all other .nbf files from directory and run update - and everything is OK without any mistakes. Problems appears after other upgrades (nb and mk_).
landau said:
BTW you can install Radio ROM without any passwords and xda3nbf. Just remove all other .nbf files from directory and run update - and everything is OK without any mistakes. Problems appears after other upgrades (nb and mk_).
Click to expand...
Click to collapse
Just upgraded my Imate Jam radio stack to this one and seems that it improved phone sound quality a lot or am I just hoping so ?!
However no problems with upgrading the radio stack only!
Hello,
landau said:
Be careful with this ROM. I tried to install it and now my Compact is dead . I can't reflash it anymore even from SD card. Tried everything and now it is in service-center. They are triing to fix it but still with no success ((
Click to expand...
Click to collapse
Hope you can solve your Magician problem. Which file did you use to upgrade your PPC: MA_Qtek(BrPt)_10600_116_10500_SHIP.exe or MA_DANG_WWE_10600_115_10500_SHIP.exe.
Thanks
macrinus said:
Hope you can solve your Magician problem. Which file did you use to upgrade your PPC: MA_Qtek(BrPt)_10600_116_10500_SHIP.exe or MA_DANG_WWE_10600_115_10500_SHIP.exe.
Thanks
Click to expand...
Click to collapse
MA_Qtek(BrPt)_10600_116_10500_SHIP.exe
Seems like T-Mobile have brought out their second maintanance release, supposedly including blackberry (jumps up and down, then realises blackberry is overhyped and overpriced).
Downloading it now from
http://t-mobile.iris-global.com/download_manager_mda_com.html
From the filename it appears the radio stack is still at 1.12, but I'll check once it's on.
Apologies if this is old news but I couldn't find any reference to it so far.
Technology hates me
Computer decided to reboot during ROM flash, feck knows why. Luckily it seems the TMO upgrade utility can restart its flashing procedure even though connection was lost.
Don't mind computer problems if they got some kind of sense to them, but randomly just restarting for the first time since I built it during the most ackward time just proves to me that computers are both evil and have a since of twisted irony.
Any improvement
Any improvement in this release?
I have been using the May update (BigStorage applied) since July fairly successfully.
I don't want to go through this if it's not worth it, so would appreciate advice from anyone who has applied it first.
Thanks
Well it's now got Blackberry support, whoopty f***in do. Also the radio version is still 1.12 so that has to be updated seperatly. In the 15min its been alive I havn't noticed any major changes but never really expected to.
Will post if I experience any problems or notice anything lifechangingly amazing about this new ROM. Would be nice if people using this ROM could do the same.
BTW anybody got a list of the ExtROM files and their comparitve uselessness? I went through the 1.12 ROM with a CAB manager but really can't be arsed this time round. Probably just install the whole lot through shear laziness. On second thoughts the BB client takes up 1.3Mb, so like f**k am i letting that onto my baby.
Hi Herman,
Why not go for BigStorage as you're not using the ext-rom. In the upgrade to radio 1.13 you can find how to do it from the shipped rom & on the ftp there's a bs 1.13 rom present, based on the Dutch TMO version so WWE, but use your own ext-rom files for specific UK settings.
Cheers, M
Cheers
Sorry, didn't really put it right. Already had the 1.13 radio downloaded and just installed it after, was no worries there. As for the BigStorage ROM, I've never particularly liked the idea, especially after reading problems people have had reverting back to the old storage configuration. I'm quite happy with my 512Mb SD card, wouldn't really use the extra space in storage anyway.
Cheers for your thoughts though mate
Ps had the new ROM up and running for few hours now, not noticed any glaring issues apart from that damn lack of BT serial ports issue but thats the radio not the OS ROM.
BigStorage
Finally gave in and overcame my fears. Applied the BigStorage hack to the latest TMO ROM as I read on here that it's reversible. Well seemed to have gone smoothly, although the increased hard reset time at the begining nearly made my heart stop.
If anyone wants I can upload the latest TMO official ship (1.13) with BigStorage hack, which doesn't need the SD card flashing method. Can do straight over USB.
Just post a msg if you want me to upload.
herman3101 said:
Seems like T-Mobile have brought out their second maintanance release, supposedly including blackberry (jumps up and down, then realises blackberry is overhyped and overpriced).
Downloading it now from
http://t-mobile.iris-global.com/download_manager_mda_com.html
From the filename it appears the radio stack is still at 1.12, but I'll check once it's on.
Apologies if this is old news but I couldn't find any reference to it so far.
Click to expand...
Click to collapse
that doesn't work with my jam ... i still can't figure out how to update my ROM.
Re: BigStorage
herman3101 said:
Finally gave in and overcame my fears. Applied the BigStorage hack to the latest TMO ROM as I read on here that it's reversible. Well seemed to have gone smoothly, although the increased hard reset time at the begining nearly made my heart stop.
If anyone wants I can upload the latest TMO official ship (1.13) with BigStorage hack, which doesn't need the SD card flashing method. Can do straight over USB.
Just post a msg if you want me to upload.
Click to expand...
Click to collapse
i would love to have that...right now im experimenting some of the roms thats available. i would like to give it a try. please upload it here or on the ftp. thanks mate.
One thing, this EXT ROM is 1.13 128 while NL EXT 113 ROM is 131. Which one we should use??
Re: BigStorage
parklife said:
i would love to have that...right now im experimenting some of the roms thats available. i would like to give it a try. please upload it here or on the ftp. thanks mate.
Click to expand...
Click to collapse
Hi parklife,
Still strugling to get it done? I gues herman3101 will upload a modified nk.nbf. Hope you succeed with it. At least I did with a patched nk.nbf. Can't upload myself for a few days as I'm not in the neighborhood of my PC. It's just me & my magician and I'm not complaining.
Cheers, M
Uploading now
Well I'm uploading the ROM up to the ftp now. I've included the updated nk.nbf as well as all the files needed to do a USB install. The files were small enough for me to think well why not. Once that's been uploaded I'll check the download section and find a link for you all.
Further to the guy who couldn't update his ROM, being kinda vague there buddy but I'll see what I can do. If you would be so kind as to follow these instructions pretty much to the letter then we should be OK:
- Hard Reset your MDA (press power button at same time as reset)
- After the selecting your time zone do a soft reset to avoid the customization process
- Plug your fresh MDA into your USB and wait for ActiveSync to bring up the connection wizard, select Guest partnership
- With your MDA still plugged in but in Guest mode just double click on the file you downloaded of T-Mobile and follow the onscreen instructions.
If you still have problems after following those steps then don't hesitate to reply but please be more specific so we don't have to guess what your issue is.
Will post a message when the BS ROM is up on the ftp
PS Well with the BigStorage ROM it obviously doesn't matter which ExtROM, but I would always go for the one from your provider so if you are with T-Mobile UK then go for their ExtROM because your guarenteed compatibility
Link to the ROM
ftp://xda:[email protected]/Uploads/Magician/WWE_TMO_1.13 Official Release with BS.zip
ftp://xda:[email protected]/Uploads/Magician/
The first is a direct link which probably won't wok because of the way I named the file and the second is a link to the folder which it is in.
I have to be honest I have no idea how to move this ROM into it's appropriate folder under Magician/BigStorage ROMs but o well. You'll find it where I've specified.
BTW the file attached is a list of my interpretations of what the 1.13 ExtROM files do. By no means conclusive or correct, its just what I've noticed them do during a stage by stage install and looking for clues inside the cabs.
herman3101,
Album & camera are bundled in the cab. That's the only flaw I noticed in your nice description.
Probably a moderator will move your file to the download section. Guess that's what happened to my BS rom as well. Thanks for uploading your files. It takes me ages to upload those files with my magician.
Good work & seems you're right on my track with decisions making for BS. Only I messed my first try completely and that's something I'm not wishing to anyone. Just waiting for the first hard-reset to finish is enough I think.
Regards, M
Re: BigStorage
oltp said:
Hi parklife,
Still strugling to get it done? I gues herman3101 will upload a modified nk.nbf. Hope you succeed with it. At least I did with a patched nk.nbf. Can't upload myself for a few days as I'm not in the neighborhood of my PC. It's just me & my magician and I'm not complaining.
Cheers, M
Click to expand...
Click to collapse
oltp, i tried your ROM, everything works fine, but it seems the clock stuck on 24 hour format, usually i can change it into 12 format just like i want it, but the Dutch ROM seems did not offer 12 hour format. But i trully appriciate your time and effort fot uploading the ROM
thanks oltp.
Re: Uploading now
herman3101 said:
- Hard Reset your MDA (press power button at same time as reset)
- After the selecting your time zone do a soft reset to avoid the customization process
- Plug your fresh MDA into your USB and wait for ActiveSync to bring up the connection wizard, select Guest partnership
- With your MDA still plugged in but in Guest mode just double click on the file you downloaded of T-Mobile and follow the onscreen instructions.
Click to expand...
Click to collapse
hey herman, thanks for the upload, i got it to work on my M500. But i would like to add something on the set up. You need to do some extra steps to avoid the the ID ERROR 120. Ok here ya go:
-Extract the rom
-edit the RUU.conf with notepad, add [CHECKCEID_TYPE]=1 on the top
-copy MaUpgradeUt_noID.exe from ftp to the extract folder
-press power, camera and rest on your magician
-plug the magician to the USB
-AND execute the MaUpgradeUt_noID.exe
-follow instuction
I waited for 4 minutes till i got my welcome mode.
for more info go check on the ampda how to's pdf file
thanks for herman3101, oltp, and ampda, now i have the perfect rom that i will keep for some time.
Hey Parklife,
Glad you finally made it. Don't think the Dutch rom is any different from the UK rom, both are 1.13 WWE TMO. Except for the ext-rom ofcourse. Managed to get my time on 'h:mm am' too with the english (us) region.
Good thing is that everyone can choose of three methods, to get this BS rom, whichever way they're feeling most comfortable ith and that has been different before.
Cheers to all of you.
Re: Uploading now
parklife said:
hey herman, thanks for the upload, i got it to work on my M500. But i would like to add something on the set up. You need to do some extra steps to avoid the the ID ERROR 120. Ok here ya go:
Click to expand...
Click to collapse
Cheers for complementing the post, didn't include it because my MDA is from TMO UK so I don't need to do that step.
PS I've been running the ROM for a little while now and it seems as stable as ever
hey, one more question for you guys...after i install the Camera_Wizard_Magician_T-Mobile_WWE_RC28_Customize.CAB, my magician clock changed into 24 hours clock format. I tried to change it into 12 hours format on regional setting - date like oltp said, but could not change it back to the 12 hours format...have you guys had the same problem? no biggies, i just not use to the format.
Parklife,
I noticed that the clock changes only after I alter the 'time style' on the time tab (sample changes immediately) go to another tab and then touch the clock on my programbar. Changing the region seems not necessary. Yesterday I fiddled a bit with the settings, now I used a more structural approach.
Cheers, M
This is the old RK... I'm working on the new one...
Please go to: http://buzzdev.net/index.php?option=com_simpleboard&Itemid=59&func=view&id=23392&catid=64
<<< Big thanks to mamaich for his tools >>>
Great Thanks :lol:
WM2K5 ROM KITCHEN
Hardware buttons : Camera and rec don't work
In settings / Buttons you don't find the buttons to set different app.
Great job bepe keep working
The bug with buttons is very simple
go to registry key
\HKLM\Software\Microsoft\Shell\
and add key "Keys", then go to
\HKLM\Software\Microsoft\Shell\Keys\
and add key "40C1", "40C2", "40C3" and "40C4"
Thats ALL
P.S.
40C1 - calendar, 40C2 - contacts, 40C3 - record and 40C4 - camera
Re: WM2K5 ROM KITCHEN
f.cervera said:
Hardware buttons : Camera and rec don't work
In settings / Buttons you don't find the buttons to set different app.
Click to expand...
Click to collapse
As a workaround extract the attachment into DEV\OEM\ and rebuild. I compiled it for the German AKU2.0 ROM.
Tnx Bepe for your great work!
df2jh
IIWPO integrated into Himalaya ROM
Bepe offers us the great option to integrate this well-known theft protection into our ROMs.
Just extract the attachment into DEV/OEM. Open 97bd8b8c-5fe5-4bb1-8ede-f55865d7baf8.rgu with wordpad. Put in your name as you will enter it in the 'Owner Information' as well as a MSISDN to where short message should be sent in case somebody modifies the 'Owner Information'. Rebuild.
Works as is only on German devices. Modify '\Windows\Autostart' in initflashfiles.txt to appropriate folder name of your language (e.g. '\Windows\Startup' in WWE).
df2jh
Is this method designed for the Himalaya only, or would it work for the Universal as well?
I need some help to make DEV and ROM packages for Wizard (I've never used a Wizard)…
Maybe there is somebody there who already used mamaich’s tools to edit a Wizard ROM?
@thefunkunfaked
Sorry,
only Himalaya for the moment, next will by BA and Wizard.
Universal will by last because of the VGA resources (those make thinks difficult).
@df2jh
Wow.. great thanks, you are the first one building packages.
It’s the first time I hear about IIWPO nice app.
bepe said:
I need some help to make DEV and ROM packages for Wizard (I've never used a Wizard)…
Maybe there is somebody there who already used mamaich’s tools to edit a Wizard ROM?.
Click to expand...
Click to collapse
Bepe: let me know how to make it , I will make it for you , PM me,
I had dump rom for Wizard , it used mamaich's tools . if I am right just replace each files for Himalaya right ps which rom you want for base ?
I had dump ruu_prodigy_1081002_104_10910_tmo_usa_ship
thanks.
Re: WM2K5 ROM KITCHEN
df2jh said:
f.cervera said:
Hardware buttons : Camera and rec don't work
In settings / Buttons you don't find the buttons to set different app.
Click to expand...
Click to collapse
As a workaround extract the attachment into DEV\OEM\ and rebuild. I compiled it for the German AKU2.0 ROM.
Tnx Bepe for your great work!
df2jh
Click to expand...
Click to collapse
Is it possible to have the same for WWE AKU 2.3 rom ?
And again thanks to Bepe and all who contribute to this.
hi,Bebe,, very interesting and i am trying to make CHS 2.2 now.
all of them are perfect!
*Extract the DEV folder
*Extract one ROM to DEV
*Extract one OS to DEV
*Extract one LOC to DEV
*Extract all OEM Packages you need to OEM
*Run CreateOS.exe and click the button
*Run CreateROM.bat
and created the ROM nk.nbf!
Great! but this time i didnt make OEM addtional coz my initial test.
The i tried to Flash on to my Himlaya, now runnning
2.01a64MB WWE,
But when try to Flash,,country ID error was happen,
Before it never happen to me.
So i tried to change Country ID but still error.
Then tried to Flash another CHS ROM on to mine,
it can done.
Used same upgrade utility.
Do you have any idea why i can not flash?
Thanks,
Hi Asukal,
Have you tried HimaUpgradeUt_noID.exe?
bepe said:
Hi Asukal,
Have you tried HimaUpgradeUt_noID.exe?
Click to expand...
Click to collapse
oh! now i can flash.......
thanks,
now i could flash and boot,
then came to "Screen Setting& Copy write (C)1996-2005" with sound.
After that, Stylus and Hard Button didint work,
so can not go ahead from this screen! :lol:
Dumped nk.nbf and checked drivers and files.
seems there.
whats wrong with me,,??
i created this rom too rush instantly.
should do carfully...i knew..
any way, i wll try with Mr,mWang made ROM tommorow.
Now 6:00 morning here.
i gonnna sleep!
Thanks!
You are right there is a problem...
...I'll try to find that.
Don’t have much time at the moment and I don’t have any idea why CHS reacts not the same way as the other packages any help is welcome.
bepe said:
You are right there is a problem...
...I'll try to find that.
Don’t have much time at the moment and I don’t have any idea why CHS reacts not the same way as the other packages any help is welcome.
Click to expand...
Click to collapse
Not only CHS also CHT too.is possible wince.nls different with others package ?
hi bebe
i am cheking each files, hope i can find some hints.
Hi There
i make the arabic Rom based on the 2.3 wwe and it work perfect i add somme other application on it from the eten resco keybord speed dial and ....
but i have sometimes that the pda hang and the are no way only the reset to solve it
i am checking the file too to know whats happand
but great job Bepe as usual
Sacaman
ActiveSync like WM2003?
My device now will be recognized as "PocketPC USB Sync" when connected via USB. That ´s the way WM2003 did it. It´s faster and more reliable than the WM2005 method via netwotk connection "Windows Mobile-based Device" and TCP/IP. Great, how did you manage that?
but we lose the network connection on it
now i can't surf on internet or connect the msn true the activesync
if somme one do it please advice
Sacaman
Here it is:
This utility runs on your computer (PC/Laptop) not on your PPC Phone!
You will be Patching the nbh file before you flash your device.
Requires you have Dot NET Framework 2.0.0x or better installed.
This simple tool will easily change:
The Rom Version Displayed during the Boot Process.
The Initial Rom Date
The PagePool Setting (supports Dynamic, 6mb, 12mb, 16mb, 18mb, 24mb & 32mb).
Easy to use:
1. Click [Browse] and find your NBH File
2. Click [Analyze], it will find the Rom Version, Rom Date and PagePool Settings and tell you what they are.
3. Make the desired changes.
4. Click [Modify]
5. If you click [Analyze] again it will verify that your changes were made to the image (imemory).
6. Click [Save]
You have changed your PagePool and/or Update the Rom Date!
I have tested this and successfully flashed the following modified Rom Images:
AT&T WM6.0 Rom 1.62.502
Dopod WM6.1 Rom 3.10
AT&T WM6.1 Rom 3.51
Use at your own risk.
I will be keeping it in my 4shared Public Folder: Kyphur.4shared.com. There is now a folder for the PagePool Patcher, go there for the orignal & latest Versions.
Special thanks to duttythroy, Tayton & Sleuth255 it was their info that got this started.
If you want to support development of this (and possibly other Rom Cooking Tools) click on the [About] button to find a [Donate!] button.
Also, it has been reported to work on Touch dual Rom Files.
Enjoy....
Can you add 10mb PagePool Size ?
Is-it possible to modify the first number in ROM version ?
Thanks for your hard work !
thanks alot for your hard work kyphur. Will this work on slueth's 1.2 or schap's? What is it supposed to say if it don't work? TIA..
No it is not possible to modify the first number, even if I actually overwrite it in the Rom file it will have no effect.
As for adding new PP Sizes, I think I've got it pretty well covered. I mean is there really that much of a difference between 10 & 12mb? Yeah, I know I have 16 & 18 but that's because 16/18mb seems to be a sweet spot with the Kaiser.
Tell you what, if I find other reasons to make a new compile then I'll add a few more PP Sizes.
MickyMax said:
Can you add 10mb PagePool Size ?
Is-it possible to modify the first number in ROM version ?
Thanks for your hard work !
Click to expand...
Click to collapse
It should work on all of them.
If it reports any strange data (like Rom Version or Date contains something out of place) or an unusual PagePool Number then let me know.
Knumb said:
thanks alot for your hard work kyphur. Will this work on slueth's 1.2 or schap's? What is it supposed to say if it don't work? TIA..
Click to expand...
Click to collapse
thanks again! I'll try it out and let you know if I get some weird info...
Very good to have a patcher for all ROMS
But, when I hv used it on your own ROM (XDA live 3.0) and set the PP to dynamic (which I believe is the best), it failed to analyze the ROM again.
So, I was afraid to flash the ROM with wrong parameters
I'm looking into it right now, found a minor coding issue related to adding the "Classic Rom" support that only affected setting the PP back to Dynamic.
msharaf said:
Very good to have a patcher for all ROMS
But, when I hv used it on your own ROM (XDA live 3.0) and set the PP to dynamic (which I believe is the best), it failed to analyze the ROM again.
So, I was afraid to flash the ROM with wrong parameters
Click to expand...
Click to collapse
Fixed & Uploaded, get the latest from my rapidshare folder.
msharaf said:
Very good to have a patcher for all ROMS
But, when I hv used it on your own ROM (XDA live 3.0) and set the PP to dynamic (which I believe is the best), it failed to analyze the ROM again.
So, I was afraid to flash the ROM with wrong parameters
Click to expand...
Click to collapse
kyphur said:
Fixed & Uploaded, get the latest from my rapidshare folder.
Click to expand...
Click to collapse
That was quick will test and give feedback
Thanks
Great Great Great
Works flawlessly (tested on many versions)
One last question, can we do it on the phone memory without need to re-flash after modification.
Thanks
Nope, you got to modify the image file before flashing.
msharaf said:
Great Great Great
Works flawlessly (tested on many versions)
One last question, can we do it on the phone memory without need to re-flash after modification.
Thanks
Click to expand...
Click to collapse
kyphur said:
Nope, you got to modify the image file before flashing.
Click to expand...
Click to collapse
Thanks again for your prompt response
Cheers
Last update:
I did change the PP in your ROM to Dynamic
After flashing the phone freezes at windows welcome screen and never prompt to touch the screen to continue preliminary setup.
I changed the PP of the same NBH file from Dynamic to 32MB, reflashed, and worked.
Couldn't get my favor dynamic PP
Wow, that is really odd, for Dynamic I simply set the values back to their default.
I'm busy with work right now and might not get a chance for in depth testing for a few days but by this weekend I'll give my development kaiser a workout and see if I can duplicate your results.
msharaf said:
Last update:
I did change the PP in your ROM to Dynamic
After flashing the phone freezes at windows welcome screen and never prompt to touch the screen to continue preliminary setup.
I changed the PP of the same NBH file from Dynamic to 32MB, reflashed, and worked.
Couldn't get my favor dynamic PP
Click to expand...
Click to collapse
maybe n00b but...What does dynamic actually do??
Dust2Dust said:
maybe n00b but...What does dynamic actually do??
Click to expand...
Click to collapse
No fixed size, grows as much as needed.
thanks for one more time for your work kyphur
if i change pagepool and flash again the new rom,can i use a backup for restore (from the same rom but with different pagepool) or it's worthless??
and i have to build again all my apps from beginning....
In theory you should be fine.
zaharakis said:
thanks for one more time for your work kyphur
if i change pagepool and flash again the new rom,can i use a backup for restore (from the same rom but with different pagepool) or it's worthless??
and i have to build again all my apps from beginning....
Click to expand...
Click to collapse
kyphur said:
In theory you should be fine.
Click to expand...
Click to collapse
i'll try it and i'll give report
thanks for your support my friend
Dimitris
SuperJustKitchen v0.9 Released.
Go to my site: http://justkitchen.info to get the updates and the info. It takes to long to update every device's forum that is supported, and I plan to support all devices, eventually.
Word of warning:
Not all EXT's have been tested or modified for the every device. Please test test and test and then let me know which packages don't work and what YOU've done to fix them. (I don't have time to fix ALL of them by myself.) Some packages will only be compatible with some devices.
(I'm no longer updating each thread separately for each device but just updating my site and posting the release info here. I will only update each thread to say that a new version is out.)
**Warning**
Before using this kitchen, you MUST read the whole thread. Any questions that have been answered will be ignored. This is your only warning.
**Disclaimer**
I am not responsible for any damage that may be done to your phone with a ROM created in this kitchen.
I am not responsible for any damage done to your computer.
I am not responsible for anything... at all.
Introducing SuperJustKitchen!
SuperJustKitchen is based on [http://forum.xda-developers.com/member.php?u=843218"]airxtreme[/URL]'s osKitchen Zero. All credit on for the kitchen backend goes to him.
Features
A completely stripped ROM. (Work in progress for some devices.)
LZX and XPR compression (Also option for No compression.)
Auto clean files that are language specific or DPI specific that your ROM does not need
Auto port missing language MUI files
Automatic rec'loc'ing for devices without native 6.5 nk's
6.1 and 6.5 support
Auto XIP and SYS porting
Auto NBH packing
Tool to convert OEM packages to EXT packages
Auto file conflict fix (don't have to removing older file that conflict (not that there are any. )
Save custom ROM settings (for cooks for multiple ROMs)
Cook multiple languages at the same time with the same ROM settings (Have to add language support yourself. I removed the required MUI's a while back because they made updating the kitchen and adding devices a nightmare.)
MUCH better organization of EXT packages
Active development instead of a program that is no longer being developed
Cleaner and easier to use interface
A built-in and customizable Tutorial section
And more!
Builds included
21056 - WM6.1
23658 - WM6.5 with new redesigned GUI
At the moment, this is an ENGLISH (WWE) only kitchen. This might change...
NOTE: In order for me to keep track of whether my time was well spent or wasted, if you use this kitchen to make a ROM, please either include SJK in the name or just mention that it was SJK cooked in your ROM's thread.
NOTE: This kitchen assumes that you know how to flash through SD, recover from a bad flash and are able to backtrack your steps to figure out how you broke your own ROM. If you do not understand these, please learn them first. Do not PM me asking me. I have written numerous walkthroughs on all these except on how to backtrack your steps. For that, just remember what you're doing as you do it and keep backups.
If you find any issues, PLEASE report them to the bug tracker in my website. It will help me make this kitchen better!
ENJOY!!!
COOL......
Kwel, great booster for new chefs..!!!
error..error....
The elf/elfin side is untested (as I didn't have a tester for it) so let me know if you run into any problems.
Please also post any problems in my bug tracker on my site. Thank you
ivanmmj said:
The elf/elfin side is untested (as I didn't have a tester for it) so let me know if you run into any problems.
Please also post any problems in my bug tracker on my site. Thank you
Click to expand...
Click to collapse
already posted to ur site.....
saurabh88 said:
already posted to ur site.....
Click to expand...
Click to collapse
Please use the bug tracker. (It's one of the links on the site on the left hand side.)
But for now:
ok fine..in windows 7 when i cooked for elfin everythings work fine when i havent include any ext packages... it buikd .nbh but there is update 270error.. ok lets take another look..when i had included most of the ext packsges for first foyr times it gives me oskitchen not responding..after sometime succed in making.nbh file but same 270pdate error..... so what is probleml?... ok if u can plz add function of adding multiple or all ext packages...i have to do it manually.. i think it is promising kitchen but wait...
Click to expand...
Click to collapse
Are you HardSPL'd? If so, do you have the file size limit removed? Also, don't include most of the packages. Your device only has so much space. You're not supposed to include that many programs.
ivanmmj said:
Please use the bug tracker. (It's one of the links on the site on the left hand side.)
But for now:
Are you HardSPL'd? If so, do you have the file size limit removed? Also, don't include most of the packages. Your device only has so much space. You're not supposed to include that many programs.
Click to expand...
Click to collapse
hspl 3.10cmnox...
yes i had remove the file size limit...
file size wa 89mb....
i registered in ur site...ok...
ivanmmj said:
Please use the bug tracker. (It's one of the links on the site on the left hand side.)
But for now:
Are you HardSPL'd? If so, do you have the file size limit removed? Also, don't include most of the packages. Your device only has so much space. You're not supposed to include that many programs.
Click to expand...
Click to collapse
hspl 3.10cmnox...
yes i had remove the file size limit...
file size wa 89mb....
i registered in ur site...ok...but when i go to bug tracker it says helllo guest..i also activate my a.c. but no use..
tried by two gmail &yahoo id but .....
saurabh88 said:
hspl 3.10cmnox...
yes i had remove the file size limit...
file size wa 89mb....
i registered in ur site...ok...but when i go to bug tracker it says helllo guest..i also activate my a.c. but no use..
tried by two gmail &yahoo id but .....
Click to expand...
Click to collapse
It shows that you are registered twice and are activated on both accounts.
I do not have the ability to see passwords. IM me one of the usernames and passwords that you used so I can troubleshoot.
As far as the ROM goes:
If you have an elf, that file size is massive. Remember that the limit only removes the lower limit of a 50mb requirement. The elf doesn't have much space. Do not enable so many things. If you must have all those things, at least enable LZX compression and EXT-UPX compression.
ivanmmj said:
It shows that you are registered twice and are activated on both accounts.
I do not have the ability to see passwords. IM me one of the usernames and passwords that you used so I can troubleshoot.
As far as the ROM goes:
If you have an elf, that file size is massive. Remember that the limit only removes the lower limit of a 50mb requirement. The elf doesn't have much space. Do not enable so many things. If you must have all those things, at least enable LZX compression and EXT-UPX compression.
Click to expand...
Click to collapse
i
i have elfin.....
i had use lzx method....
no one try this?
plz report bugs lol....we got new to try?????
I tried - and already reported into BTS. Corrupted image is reported by RUU everytime I try to flash, does not matter which OS or settings I use. fully unlocked elfin, ipl&spl 3.10
nocturne said:
I tried - and already reported into BTS. Corrupted image is reported by RUU everytime I try to flash, does not matter which OS or settings I use. fully unlocked elfin, ipl&spl 3.10
Click to expand...
Click to collapse
same problem...
even friend of mine from opal have same problem..
dont know y this happen?
wait for the owners.
Looks like there is a corruption somewhere in the kitchen. It is affecting every device. I think it has to do with the executable I changed last minute before updating the kitchen. I'll check myself on my computer.
any update yet?
I've been home sick with the flu so I haven't even touched my computer since. I will let you know more tomorrow. I should get some time to work on it, then.
Get well soon! We are awaiting yout kitchen, seems to be really nice once finished
ivanmmj said:
I've been home sick with the flu so I haven't even touched my computer since. I will let you know more tomorrow. I should get some time to work on it, then.
Click to expand...
Click to collapse
oh sorry to here...get well soon.
i m very eager to try this new kitchen...
Thanks guys.
Do me a favor.
Go to your sources folder and delete the "_Compress" folder then try to cook and flash a ROM. If it works, then that was the problem all along... he moved the folder to another location but the kitchen still reads both.)