just wondering , bout to change roms again, wanna be safe, thanks
omaralt said:
just wondering , bout to change roms again, wanna be safe, thanks
Click to expand...
Click to collapse
No...
Please read the threads!
This question has been asked at least over 10 times...
No need to start a new thread for it!
omaralt said:
just wondering , bout to change roms again, wanna be safe, thanks
Click to expand...
Click to collapse
No you can check your SPL by pussing the power and photo button to getter and pussing also the reset button it shows then SPL 1.xx.xx Olipof after checking softreset and you are back.
This question and answer has been asked so many time already, thread closed.
Related
Pls help me.. What shud ı do? after wm6 beautiful edition, my üni is stopped. Now it doesnt open. only it can be hard reset and than doesnt open again...
erdem_das said:
Pls help me.. What shud ı do? after wm6 beautiful edition, my üni is stopped. Now it doesnt open. only it can be hard reset and than doesnt open again...
Click to expand...
Click to collapse
Hi,
Put the device into BootLoader (Hold the BackLight & power Button whilst pressing reset) then re-flash your device.
If that still does not work then try re-creating your partition table.
Cheers,
Beast
Try to recharge the device, it happened to me too, the battery drained out.
wakko said:
Try to recharge the device, it happened to me too, the battery drained out.
Click to expand...
Click to collapse
ı dont believe it (my battery is good)....
and thank u very much beast0898... ı will try it then ı reply u...
thanks thanks thanks....
thank u very much beast0898... my problem is solved... u are really best friend...
my wriless doesnt work!!!
Now my üni is ok but wriless doesnt work... I flashed one more time with different version again doesnt work what can ı do?
erdem_das said:
Now my üni is ok but wriless doesnt work... I flashed one more time with different version again doesnt work what can ı do?
Click to expand...
Click to collapse
Go back to WM5 - you obviously haven't read enough to move to WM6
TehPenguin said:
Go back to WM5 - you obviously haven't read enough to move to WM6
Click to expand...
Click to collapse
I've turned back to wm5. but still does not work ...
tehpeng.
TehPenguin
Senior Member
Is it really true? i mean this is crazy. is this not a forum where people are helping eachother? try to answer to help instead of considering yourself such a master of everything. Or even better, dont bother to reply if everyone but yourself are such newbies. It isnt really the first time i see you go about in the forums picking on people for really no reason and for noo good.
Or let me know if this really is the forum where one asks a question and it is not replied but one gets bullied instead.
Teh, remember that you was about to do it to me until you found out that i was right on the sms-beep thingy.
behave.
thats my 2 cents.
How to turn A&AT Tilt back to its original state before unlocking ???
Thanks ..............................
savut said:
How to turn A&AT Tilt back to its original state before unlocking ???
Thanks ..............................
Click to expand...
Click to collapse
LOL did you read the 1st post?
MODS please close this redundant thread.
Here's a hint GWENI
AllTheWay said:
LOL did you read the 1st post?
MODS please close this redundant thread.
Here's a hint GWENI
Click to expand...
Click to collapse
i did read the previous posts but couldnt find out, my english's not very good, please some1 help me !
Thanks .................
here is some help read the wiki! or use google translator to turn the wiki into your native tounge
savut said:
How to turn A&AT Tilt back to its original state before unlocking ???
Thanks ..............................
Click to expand...
Click to collapse
Here, I'll help you out once! Link: http://forum.xda-developers.com/showthread.php?t=335568
If you cannot understand that then I can't help you further.
I'm still trying to figure out what an A&AT is.
P1Tater said:
I'm still trying to figure out what an A&AT is.
Click to expand...
Click to collapse
Now it all makes sense....no wonder there is no wiki for A&AT. Someone, get to it so that n00bs can find what they are looking for.
P1Tater said:
I'm still trying to figure out what an A&AT is.
Click to expand...
Click to collapse
AT&T sorry !!!
sherpa said:
Here, I'll help you out once! Link: http://forum.xda-developers.com/showthread.php?t=335568
If you cannot understand that then I can't help you further.
Click to expand...
Click to collapse
Thanks thanks .................................
hi guys, posted this in general but it seems no one can help so i thought this might be a more appropriate place to post!!
I was halfway through running the hard spl program and it closed down, i just need some advice.
I got to the unplug and replug your device section where the tri colour and it says usb on my kaiser and the CMD promp window closed.
What can i do, can i just turn off my phone? or is this a big no no. HELP me please
how do i get out of this situation????
Thanks
3nabler said:
hi guys, posted this in general but it seems no one can help so i thought this might be a more appropriate place to post!!
I was halfway through running the hard spl program and it closed down, i just need some advice.
I got to the unplug and replug your device section where the tri colour and it says usb on my kaiser and the CMD promp window closed.
What can i do, can i just turn off my phone? or is this a big no no. HELP me please
how do i get out of this situation????
Thanks
Click to expand...
Click to collapse
there are several places to start,
http://forum.xda-developers.com/showthread.php?t=334679
post you question in this thread,
next these are the stickys, first 2 threads in this forum, Please, please read,
http://forum.xda-developers.com/showthread.php?t=369282
see the 3rd post
http://forum.xda-developers.com/showthread.php?t=383904
you might what to post where you got the hard spl download from
good luck
oh, put on some flame retardent its going to get hot
love the noobie
im out
overhaulengines said:
oh, put on some flame retardent its going to get hot
love the noobie
im out
Click to expand...
Click to collapse
Hehe that was funny, glade you guided him though instead of flamming..
overhaulengines said:
oh, put on some flame retardent its going to get hot
love the noobie
im out
Click to expand...
Click to collapse
LOL I think he still deserves a flaming for that one, why do I constantly spot at least 5 of these threads a day
Sighhhhhh.......
Here is what you'll need should something go wrong & your device won't start.
MSN/Live Messenger ([email protected])
GSLEON3 said:
Sighhhhhh.......
Here is what you'll need should something go wrong & your device won't start.
MSN/Live Messenger ([email protected])
Click to expand...
Click to collapse
I need to get you a Superman cape.
With a Sun Devil logo on it.
hy all
i have a HTC TyN II device
i install a original rom version with hardspl.after that, i try to return to my original bootloader.now my bootloader look like
kais130
SPL-1.56.0000
CPLD-8
is ok or not?
some one tell me this is a AT&T bootloader or for TyTN II?
thx all
Search!! There is a thread about convirting youre phone back to original!
i do it.but everything is strange and not very clear.i need thsi answer quick.thx all.
dude you've started threads for every problem you've had, all of which are answered in the WiKi... not to mention that when people DO answer your questions simply you still don't seem to know what they are talking about... maybe you shouldn't be flashing roms.
ericmcintire said:
dude you've started threads for every problem you've had, all of which are answered in the WiKi... not to mention that when people DO answer your questions simply you still don't seem to know what they are talking about... maybe you shouldn't be flashing roms.
Click to expand...
Click to collapse
thx.nice advice
JMorrison said:
thx.nice advice
Click to expand...
Click to collapse
Start your reading here, any problems, ask in here...
http://forum.xda-developers.com/showthread.php?t=335568. (because you obviously seem lost)
Read this info in the sticky in this forum and on the wiki. If you keep reading it will start to make sense in time, it did for me
HTH
Ta
Dave
peoples i read all stuf allready from this forum but all is strange for me now.is so f...g hard to some one tell me what is the corect specifications for a bootloader for a TyTN II?
JMorrison said:
peoples i read all stuf allready from this forum but all is strange for me now.is so f...g hard to some one tell me what is the corect specifications for a bootloader for a TyTN II?
Click to expand...
Click to collapse
Ok I just researched it for you 1.56 is fine.
is not ok.i was in a shop and i veryfy bootloader for original device.
is ok for me now.thx for all peoples help me and for rest off them.
i had update a wrong version spl for my HTC tytnII/kaisar,now my ppc cannot display anything ,even can not hardreset as well, it just show nothing ,had any method can help me.
chin_oct said:
i had update a wrong version spl for my HTC tytnII/kaisar,now my ppc cannot display anything ,even can not hardreset as well, it just show nothing ,had any method can help me.
Click to expand...
Click to collapse
What in the world are you talking about ?
What ROM? What exactly did you do?
The idea of trying to flash a new ROM, then not being able to start happens quite often, and have different problems & solutions, so try to be a bit more specific.
thanks for ur suggestion guy ,i had sent my ppc go to service centre alreday, it si my problem,coz had no read carefully for the instruction ,when my ppc back, I WILL TRY AGAIN TO FLASHING THE ROM.....until i success....
chin_oct said:
thanks for ur suggestion guy ,i had sent my ppc go to service centre alreday, it si my problem,coz had no read carefully for the instruction ,when my ppc back, I WILL TRY AGAIN TO FLASHING THE ROM.....until i success....
Click to expand...
Click to collapse
One thing to do on this forum is to READ the Wiki, it will help you a lot!