i had update a wrong version spl for my HTC tytnII/kaisar,now my ppc cannot display anything ,even can not hardreset as well, it just show nothing ,had any method can help me.
chin_oct said:
i had update a wrong version spl for my HTC tytnII/kaisar,now my ppc cannot display anything ,even can not hardreset as well, it just show nothing ,had any method can help me.
Click to expand...
Click to collapse
What in the world are you talking about ?
What ROM? What exactly did you do?
The idea of trying to flash a new ROM, then not being able to start happens quite often, and have different problems & solutions, so try to be a bit more specific.
thanks for ur suggestion guy ,i had sent my ppc go to service centre alreday, it si my problem,coz had no read carefully for the instruction ,when my ppc back, I WILL TRY AGAIN TO FLASHING THE ROM.....until i success....
chin_oct said:
thanks for ur suggestion guy ,i had sent my ppc go to service centre alreday, it si my problem,coz had no read carefully for the instruction ,when my ppc back, I WILL TRY AGAIN TO FLASHING THE ROM.....until i success....
Click to expand...
Click to collapse
One thing to do on this forum is to READ the Wiki, it will help you a lot!
Related
Pls help me.. What shud ı do? after wm6 beautiful edition, my üni is stopped. Now it doesnt open. only it can be hard reset and than doesnt open again...
erdem_das said:
Pls help me.. What shud ı do? after wm6 beautiful edition, my üni is stopped. Now it doesnt open. only it can be hard reset and than doesnt open again...
Click to expand...
Click to collapse
Hi,
Put the device into BootLoader (Hold the BackLight & power Button whilst pressing reset) then re-flash your device.
If that still does not work then try re-creating your partition table.
Cheers,
Beast
Try to recharge the device, it happened to me too, the battery drained out.
wakko said:
Try to recharge the device, it happened to me too, the battery drained out.
Click to expand...
Click to collapse
ı dont believe it (my battery is good)....
and thank u very much beast0898... ı will try it then ı reply u...
thanks thanks thanks....
thank u very much beast0898... my problem is solved... u are really best friend...
my wriless doesnt work!!!
Now my üni is ok but wriless doesnt work... I flashed one more time with different version again doesnt work what can ı do?
erdem_das said:
Now my üni is ok but wriless doesnt work... I flashed one more time with different version again doesnt work what can ı do?
Click to expand...
Click to collapse
Go back to WM5 - you obviously haven't read enough to move to WM6
TehPenguin said:
Go back to WM5 - you obviously haven't read enough to move to WM6
Click to expand...
Click to collapse
I've turned back to wm5. but still does not work ...
tehpeng.
TehPenguin
Senior Member
Is it really true? i mean this is crazy. is this not a forum where people are helping eachother? try to answer to help instead of considering yourself such a master of everything. Or even better, dont bother to reply if everyone but yourself are such newbies. It isnt really the first time i see you go about in the forums picking on people for really no reason and for noo good.
Or let me know if this really is the forum where one asks a question and it is not replied but one gets bullied instead.
Teh, remember that you was about to do it to me until you found out that i was right on the sms-beep thingy.
behave.
thats my 2 cents.
hy all
i have a HTC TyN II device
i install a original rom version with hardspl.after that, i try to return to my original bootloader.now my bootloader look like
kais130
SPL-1.56.0000
CPLD-8
is ok or not?
some one tell me this is a AT&T bootloader or for TyTN II?
thx all
Search!! There is a thread about convirting youre phone back to original!
i do it.but everything is strange and not very clear.i need thsi answer quick.thx all.
dude you've started threads for every problem you've had, all of which are answered in the WiKi... not to mention that when people DO answer your questions simply you still don't seem to know what they are talking about... maybe you shouldn't be flashing roms.
ericmcintire said:
dude you've started threads for every problem you've had, all of which are answered in the WiKi... not to mention that when people DO answer your questions simply you still don't seem to know what they are talking about... maybe you shouldn't be flashing roms.
Click to expand...
Click to collapse
thx.nice advice
JMorrison said:
thx.nice advice
Click to expand...
Click to collapse
Start your reading here, any problems, ask in here...
http://forum.xda-developers.com/showthread.php?t=335568. (because you obviously seem lost)
Read this info in the sticky in this forum and on the wiki. If you keep reading it will start to make sense in time, it did for me
HTH
Ta
Dave
peoples i read all stuf allready from this forum but all is strange for me now.is so f...g hard to some one tell me what is the corect specifications for a bootloader for a TyTN II?
JMorrison said:
peoples i read all stuf allready from this forum but all is strange for me now.is so f...g hard to some one tell me what is the corect specifications for a bootloader for a TyTN II?
Click to expand...
Click to collapse
Ok I just researched it for you 1.56 is fine.
is not ok.i was in a shop and i veryfy bootloader for original device.
is ok for me now.thx for all peoples help me and for rest off them.
I have read a lot of topics and replies from this community, but i still don't know how can i change my ROM...i've downloaded one, but someone told me that i need to use Hard SPL OilPro, but i can't get the ideea. Can someone, please, explain me in easy steps what i need to do? i know it;s not hard, but....
thanx a lot..!
WHat device are you using?
HTC Trinity (P3600). thanx
Welcome to the forum
PLease read the Wiki here:
http://wiki.xda-developers.com/index.php?pagename=HTC_Trinity
There is a section on how to upgrade your ROM
And here to choose the best ROM fits for you:
http://forum.xda-developers.com/forumdisplay.php?f=359
truth99 said:
I have read a lot of topics and replies from this community, but i still don't know how can i change my ROM...i've downloaded one, but someone told me that i need to use Hard SPL OilPro, but i can't get the ideea. Can someone, please, explain me in easy steps what i need to do? i know it;s not hard, but....
thanx a lot..!
Click to expand...
Click to collapse
HARD SPL MEANS YOU HAVE TO TELL THE PHONE TO ACCEPT A ROM CHANGE THE SECURITY ON THE PHONE AND LOSE YOUR WARRENTY.
U NEED TO RE READ THE INFORMATION ON THE CHANGING ROM. IT VERY IMPORTANT UNDERSTAND AND GET IT RIGHT IF YOU GET IT WRONG YOU CAN BRICK YOUR PHONE.
HAVE YOU CHECKED THE WIKI IF YOU DONT FIND A ANSWER TRY THE SITE BELOW THE HAVE DOCUMENTATION ON CHANGING ROM
THIS SITE http://www.duttythroy.net/ THERE IS GOOD
i went to that page for upgrading, i've downloaded the ROM but i can;t find the section with somthing like this: 'how to upgrade a ROM'...please help me, i'm new in there and a begginer about PDA's...thanx a lot
truth99 said:
i went to that page for upgrading, i've downloaded the ROM but i can;t find the section with somthing like this: 'how to upgrade a ROM'...please help me, i'm new in there and a begginer about PDA's...thanx a lot
Click to expand...
Click to collapse
There you are:
http://trinityguides.info/index.php?option=com_content&task=view&id=25&Itemid=66
It´s just question of reading and searching...
hey guys well i did all what you said about take out sim and sd card and updte
but when i try to upgrade to windows mobile 6.5 its get stuck on 0%
and dont move
second problem is sometimes that i am trying to upgrade and its stuck in the 3 color screen itryed alot and read everyting but still dont know whwat to do i am hopeless..
just need osme video to show me how to upgrade or someting
thanks
RFOX100 said:
hey guys well i did all what you said about take out sim and sd card and updte
but when i try to upgrade to windows mobile 6.5 its get stuck on 0%
and dont move
second problem is sometimes that i am trying to upgrade and its stuck in the 3 color screen itryed alot and read everyting but still dont know whwat to do i am hopeless..
just need osme video to show me how to upgrade or someting
thanks
Click to expand...
Click to collapse
Can we assume that you have Hardspl on your phone ? What spl are you running ? What does it say in your bootloader ( tri color ) screen ?
This really should have been asked in " Flashing for noobs " thread, ( where your others were posted ) or in the thread of the 6.5 rom you were trying to flash, Starting a new thread with an individual problem is not good forum etiquette.
RFOX100 said:
just need osme video to show me how to upgrade or someting
thanks
Click to expand...
Click to collapse
There is no video! Just simply follow the instruction in the how to flash sticky theard word by word and it should work!
This helped me
there is a video at the bottom of this link
http://tiltmobility.com/how-to-flash-your-device/
Hope this helps
Please use mskip's sticky for questions like this.
Thanks, thread closed.
Dave
I would like to try the megam ROM my doubt is, is it possible to come back if something doesn't work to the original ROM? And if yes how? I read someting about oli pro, but it's the first time I tried ti flash a PDA so please hel me.
Many thanks
claudio
Jansolo66 said:
I would like to try the megam ROM my doubt is, is it possible to come back if something doesn't work to the original ROM? And if yes how? I read someting about oli pro, but it's the first time I tried ti flash a PDA so please hel me.
Many thanks
claudio
Click to expand...
Click to collapse
yes..it´s possible...just look in my thread under steps...or i think salvy (megan rom) have also a link to the original rom....and flash hardspl before flash another rom..it´s a must have...
with kind regards...Alex
if u can update any ROM
It's very easy............................................