hy all
i have a HTC TyN II device
i install a original rom version with hardspl.after that, i try to return to my original bootloader.now my bootloader look like
kais130
SPL-1.56.0000
CPLD-8
is ok or not?
some one tell me this is a AT&T bootloader or for TyTN II?
thx all
Search!! There is a thread about convirting youre phone back to original!
i do it.but everything is strange and not very clear.i need thsi answer quick.thx all.
dude you've started threads for every problem you've had, all of which are answered in the WiKi... not to mention that when people DO answer your questions simply you still don't seem to know what they are talking about... maybe you shouldn't be flashing roms.
ericmcintire said:
dude you've started threads for every problem you've had, all of which are answered in the WiKi... not to mention that when people DO answer your questions simply you still don't seem to know what they are talking about... maybe you shouldn't be flashing roms.
Click to expand...
Click to collapse
thx.nice advice
JMorrison said:
thx.nice advice
Click to expand...
Click to collapse
Start your reading here, any problems, ask in here...
http://forum.xda-developers.com/showthread.php?t=335568. (because you obviously seem lost)
Read this info in the sticky in this forum and on the wiki. If you keep reading it will start to make sense in time, it did for me
HTH
Ta
Dave
peoples i read all stuf allready from this forum but all is strange for me now.is so f...g hard to some one tell me what is the corect specifications for a bootloader for a TyTN II?
JMorrison said:
peoples i read all stuf allready from this forum but all is strange for me now.is so f...g hard to some one tell me what is the corect specifications for a bootloader for a TyTN II?
Click to expand...
Click to collapse
Ok I just researched it for you 1.56 is fine.
is not ok.i was in a shop and i veryfy bootloader for original device.
is ok for me now.thx for all peoples help me and for rest off them.
Related
just wondering , bout to change roms again, wanna be safe, thanks
omaralt said:
just wondering , bout to change roms again, wanna be safe, thanks
Click to expand...
Click to collapse
No...
Please read the threads!
This question has been asked at least over 10 times...
No need to start a new thread for it!
omaralt said:
just wondering , bout to change roms again, wanna be safe, thanks
Click to expand...
Click to collapse
No you can check your SPL by pussing the power and photo button to getter and pussing also the reset button it shows then SPL 1.xx.xx Olipof after checking softreset and you are back.
This question and answer has been asked so many time already, thread closed.
HI, I am new here. I just have a question. I am getting the Kaiser/Hermes 2/TNYT could someone please tell me if I can use Schapps (Hermes 1) device ROMS on the Kaiser device??? THANKS.
nOObster said:
HI, I am new here. I just have a question. I am getting the Kaiser/Hermes 2/TNYT could someone please tell me if I can use Schapps (Hermes 1) device ROMS on the Kaiser device??? THANKS.
Click to expand...
Click to collapse
No... No you can't...
Wiki... Search... either of those would have probably answered your question. you will find that most people on this site help those who help themselves. Exhaust those options before you post "n00bster" questions.
nOObster said:
HI, I am new here. I just have a question. I am getting the Kaiser/Hermes 2/TNYT could someone please tell me if I can use Schapps (Hermes 1) device ROMS on the Kaiser device??? THANKS.
Click to expand...
Click to collapse
NO, it'll brick your device.
Kaiser in general is very stable even with shipped/stock roms.
Can anyone offer some guidence please?
I had an update get to 18% of the grey screen and freeze. Now whenever I switch on my Kaiser it goes into the red/green/blue/white screen.
Info in the screen is .RUUNBH. KAIS130. SPL-1.56.0000. CPLD-8.
I've tried all of the cooked ROMS I can get my paws on but none of them get past 0% of the grey install screen.
Pherelease helllllllllpppp !!
TIA.
Did you HardSPLed? http://forum.xda-developers.com/showthread.php?t=334679
Thanks for the reply!
NO, I didn't but I'm slurping the file right now.
Your supposed to read before you do anything so you don't brik your phone.
[size=+2] PLEASE CLOSE THIS THREAD [/SIZE]
AllTheWay said:
[size=+2] PLEASE CLOSE THIS THREAD [/SIZE]
Click to expand...
Click to collapse
Chillax man; he's only seeking help. A simple answer would do him good even if the answer is out there.
Closed....
First answer is Sorry, if you'd read you would have installed HardSPL BEFORE ANY FLASHING.
Second answer, Search for help with bricked (or stuck in bootloader) devices. There is help avaliable in the forum.
Third answer, we really don't need another "I neglected to read and bricked my device thread".
I have read a lot of topics and replies from this community, but i still don't know how can i change my ROM...i've downloaded one, but someone told me that i need to use Hard SPL OilPro, but i can't get the ideea. Can someone, please, explain me in easy steps what i need to do? i know it;s not hard, but....
thanx a lot..!
WHat device are you using?
HTC Trinity (P3600). thanx
Welcome to the forum
PLease read the Wiki here:
http://wiki.xda-developers.com/index.php?pagename=HTC_Trinity
There is a section on how to upgrade your ROM
And here to choose the best ROM fits for you:
http://forum.xda-developers.com/forumdisplay.php?f=359
truth99 said:
I have read a lot of topics and replies from this community, but i still don't know how can i change my ROM...i've downloaded one, but someone told me that i need to use Hard SPL OilPro, but i can't get the ideea. Can someone, please, explain me in easy steps what i need to do? i know it;s not hard, but....
thanx a lot..!
Click to expand...
Click to collapse
HARD SPL MEANS YOU HAVE TO TELL THE PHONE TO ACCEPT A ROM CHANGE THE SECURITY ON THE PHONE AND LOSE YOUR WARRENTY.
U NEED TO RE READ THE INFORMATION ON THE CHANGING ROM. IT VERY IMPORTANT UNDERSTAND AND GET IT RIGHT IF YOU GET IT WRONG YOU CAN BRICK YOUR PHONE.
HAVE YOU CHECKED THE WIKI IF YOU DONT FIND A ANSWER TRY THE SITE BELOW THE HAVE DOCUMENTATION ON CHANGING ROM
THIS SITE http://www.duttythroy.net/ THERE IS GOOD
i went to that page for upgrading, i've downloaded the ROM but i can;t find the section with somthing like this: 'how to upgrade a ROM'...please help me, i'm new in there and a begginer about PDA's...thanx a lot
truth99 said:
i went to that page for upgrading, i've downloaded the ROM but i can;t find the section with somthing like this: 'how to upgrade a ROM'...please help me, i'm new in there and a begginer about PDA's...thanx a lot
Click to expand...
Click to collapse
There you are:
http://trinityguides.info/index.php?option=com_content&task=view&id=25&Itemid=66
It´s just question of reading and searching...
hi..
i have Dopod C800. it will not turn on. i performed the HardSPL but it failed. before, i can still enter the bootloader. UNFORTUNATELY, at this time, it will not turn on even on the bootloader. is there any way to fix my phone??? please help.. i hope there's still ways to fix my phone.. thanks in advance..
If you want help, you're better off asking the forum where the people who repair phones dweal. This is the developer sub forum. Most of us haven't really dealt with a phone breaking like that. Sorry I'm not much help.
ivanmmj said:
If you want help, you're better off asking the forum where the people who repair phones dweal. This is the developer sub forum. Most of us haven't really dealt with a phone breaking like that. Sorry I'm not much help.
Click to expand...
Click to collapse
hhmm ok.. thanks for replying.. uhm , but do you know where to contact them??? sorry for being ignorant.. just a newbie here...
In the Herald forum. You're in the Herald-Development forum. Wrong sub forum.
Thanks a bunch!!!